Thank you for subscribing to your personalised job alerts.

    220 jobs found in L8H1M5

    filter2
    clear all
      • Edmonton, Alberta
      • Contract
      Job DescriptionSenior Safety CoordinatorEdmonton, ABContractJob Reference No.: ENBJP00014547Our major client, an energy transportation company with a focus on transportation, distribution, and energy generation is urgently looking to fill a Safety Coordinator position. Description:Responsibilities may include but are not limited to:• Verify that the Construction Contractor complies with all applicable Federal and Provincial safety Regulations as well as Company Rules and Procedures.• Review the Construction Contractor's Safety Program, Safety Record, Safety Manual, and qualifications of safety personnel.• Discuss safety objectives at the Project Pre-Job Meeting.• Inform the Construction Contractor of all specific conditions associated with the construction and ensure the Construction Contractor develops Safe Work Procedures as required.• Conduct formal and informal work inspections to ensure compliance with Project Safety Requirements.• Take required actions to correct unsafe acts or conditions which could cause injury or property damage.• Any Enbridge Authorized Representative has the authority to stop work being performed by the Construction Contractor if Safety Standards are not maintained.• Ensure the Construction Contractor completes timely and adequate Incident Investigations when necessary.Basic Qualifications:•Competent person (excavation) from an accredited learning organization•Computer literate•Good verbal and written communication skills•Good analytical skills•Ability to work independently in a fast-paced setting•Experience using defined processes for managing Health & Safety risks•Accident and incident investigation experienceIf this sounds like the right role for you and you are confident at what you bring to the table, apply now!Although we appreciate all applications, only those that meet the minimum job qualifications will be considered for this role. We thank you all for your interest.Not the right fit this time? Follow us on our career’s social media pages!Interested candidate is also encouraged to submit a copy of the updated resume to Resource Manager, Geraldine Valiarayil at geraldine.valiarayil@randstad.ca, with the Job Order Number / Position Name in the subject line.AdvantagesOpportunity to work with an organization that values its employees and works with industry experts.Responsibilities• Verify that the Construction Contractor complies with all applicable Federal and Provincial safety Regulations as well as Company Rules and Procedures.• Review the Construction Contractor's Safety Program, Safety Record, Safety Manual, and qualifications of safety personnel.• Discuss safety objectives at the Project Pre-Job Meeting.• Inform the Construction Contractor of all specific conditions associated with the construction and ensure the Construction Contractor develops Safe Work Procedures as required.• Conduct formal and informal work inspections to ensure compliance with Project Safety Requirements.• Take required actions to correct unsafe acts or conditions which could cause injury or property damage.• Any Enbridge Authorized Representative has the authority to stop work being performed by the Construction Contractor if Safety Standards are not maintained.• Ensure the Construction Contractor completes timely and adequate Incident Investigations when necessary.Qualifications•Competent person (excavation) from an accredited learning organization•Computer literate•Good verbal and written communication skills•Good analytical skills•Ability to work independently in a fast-paced setting•Experience using defined processes for managing Health & Safety risks•Accident and incident investigation experienceSummaryOur major client, an energy transportation company with a focus on transportation, distribution, and energy generation is urgently looking to fill a Safety Coordinator position. Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Job DescriptionSenior Safety CoordinatorEdmonton, ABContractJob Reference No.: ENBJP00014547Our major client, an energy transportation company with a focus on transportation, distribution, and energy generation is urgently looking to fill a Safety Coordinator position. Description:Responsibilities may include but are not limited to:• Verify that the Construction Contractor complies with all applicable Federal and Provincial safety Regulations as well as Company Rules and Procedures.• Review the Construction Contractor's Safety Program, Safety Record, Safety Manual, and qualifications of safety personnel.• Discuss safety objectives at the Project Pre-Job Meeting.• Inform the Construction Contractor of all specific conditions associated with the construction and ensure the Construction Contractor develops Safe Work Procedures as required.• Conduct formal and informal work inspections to ensure compliance with Project Safety Requirements.• Take required actions to correct unsafe acts or conditions which could cause injury or property damage.• Any Enbridge Authorized Representative has the authority to stop work being performed by the Construction Contractor if Safety Standards are not maintained.• Ensure the Construction Contractor completes timely and adequate Incident Investigations when necessary.Basic Qualifications:•Competent person (excavation) from an accredited learning organization•Computer literate•Good verbal and written communication skills•Good analytical skills•Ability to work independently in a fast-paced setting•Experience using defined processes for managing Health & Safety risks•Accident and incident investigation experienceIf this sounds like the right role for you and you are confident at what you bring to the table, apply now!Although we appreciate all applications, only those that meet the minimum job qualifications will be considered for this role. We thank you all for your interest.Not the right fit this time? Follow us on our career’s social media pages!Interested candidate is also encouraged to submit a copy of the updated resume to Resource Manager, Geraldine Valiarayil at geraldine.valiarayil@randstad.ca, with the Job Order Number / Position Name in the subject line.AdvantagesOpportunity to work with an organization that values its employees and works with industry experts.Responsibilities• Verify that the Construction Contractor complies with all applicable Federal and Provincial safety Regulations as well as Company Rules and Procedures.• Review the Construction Contractor's Safety Program, Safety Record, Safety Manual, and qualifications of safety personnel.• Discuss safety objectives at the Project Pre-Job Meeting.• Inform the Construction Contractor of all specific conditions associated with the construction and ensure the Construction Contractor develops Safe Work Procedures as required.• Conduct formal and informal work inspections to ensure compliance with Project Safety Requirements.• Take required actions to correct unsafe acts or conditions which could cause injury or property damage.• Any Enbridge Authorized Representative has the authority to stop work being performed by the Construction Contractor if Safety Standards are not maintained.• Ensure the Construction Contractor completes timely and adequate Incident Investigations when necessary.Qualifications•Competent person (excavation) from an accredited learning organization•Computer literate•Good verbal and written communication skills•Good analytical skills•Ability to work independently in a fast-paced setting•Experience using defined processes for managing Health & Safety risks•Accident and incident investigation experienceSummaryOur major client, an energy transportation company with a focus on transportation, distribution, and energy generation is urgently looking to fill a Safety Coordinator position. Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Kitchener, Ontario
      • Contract
      Are you a experience working with inspection and metrology?Will a new role with a very appealing industry leader be of interest?If so, this could be the opportunity for you!Position will be a 12 month contract with an opportunity of longer term.Support testing by conducting onboarding sessions, holding appointments, dispensing test devices and gathering feedback.Coordinate order flow intake for test units, schedule appointments, maintain communication and provide customer support for team and early access testers. Support inspection of hardware components, including:Cosmetic inspection and defect classification using microscope and various light sourcesCoating performance measurement using spectrometers, hazemeters, etc.Minimum set of skills: Background in optics, ophthalmics, opticianry.Experience in a retail dispensing eyewear clinic and/or experience working in a wholesale ophthalmic lab are relevant.AdvantagesWork with a world class organization.Excellent employee cultureExcellent opportunity for problem-solversResponsibilitiesSupport testing by conducting onboarding sessions, holding appointments, dispensing test devices and gathering feedback.Coordinate order flow intake for test units, schedule appointments, maintain communication and provide customer support for team and early access testers. Support inspection of hardware components, including:Cosmetic inspection and defect classification using microscope and various light sourcesCoating performance measurement using spectrometers, hazemeters, etc.Minimum set of skills: Background in optics, ophthalmics, opticianry.Experience in a retail dispensing eyewear clinic and/or experience working in a wholesale ophthalmic lab are relevant.QualificationsMandatoryBackground in optics, ophthalmics, opticianry.DesiredExperience in a retail dispensing eyewear clinic and/or experience working in a wholesale ophthalmic lab are relevant.SummaryEmail resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you a experience working with inspection and metrology?Will a new role with a very appealing industry leader be of interest?If so, this could be the opportunity for you!Position will be a 12 month contract with an opportunity of longer term.Support testing by conducting onboarding sessions, holding appointments, dispensing test devices and gathering feedback.Coordinate order flow intake for test units, schedule appointments, maintain communication and provide customer support for team and early access testers. Support inspection of hardware components, including:Cosmetic inspection and defect classification using microscope and various light sourcesCoating performance measurement using spectrometers, hazemeters, etc.Minimum set of skills: Background in optics, ophthalmics, opticianry.Experience in a retail dispensing eyewear clinic and/or experience working in a wholesale ophthalmic lab are relevant.AdvantagesWork with a world class organization.Excellent employee cultureExcellent opportunity for problem-solversResponsibilitiesSupport testing by conducting onboarding sessions, holding appointments, dispensing test devices and gathering feedback.Coordinate order flow intake for test units, schedule appointments, maintain communication and provide customer support for team and early access testers. Support inspection of hardware components, including:Cosmetic inspection and defect classification using microscope and various light sourcesCoating performance measurement using spectrometers, hazemeters, etc.Minimum set of skills: Background in optics, ophthalmics, opticianry.Experience in a retail dispensing eyewear clinic and/or experience working in a wholesale ophthalmic lab are relevant.QualificationsMandatoryBackground in optics, ophthalmics, opticianry.DesiredExperience in a retail dispensing eyewear clinic and/or experience working in a wholesale ophthalmic lab are relevant.SummaryEmail resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Kitchener, Ontario
      • Contract
      Are you a experience working with inspection and metrology?Will a new role with a very appealing industry leader be of interest?If so, this could be the opportunity for you!Position will be a 12 month contract with an opportunity of longer term.Inspection of mechanical and optical components, including:Cosmetic inspection and defect classification - direct/magnified using microscopes and imagingFirst article metrology using micrometers, gauges, Keyence VR, CMM.Optical coating performance measurement using spectrometers, hazemeters, etc.Material management: organize material inventory, support shipment of samples to and from vendors and company offices, Minimum set of skills: solid knowledge of metrology concepts and tools, understanding of quality control systems, ability program and use CMM, understanding of coordinate systems and how they apply to measuring components with complex geometry and datums, perform moderate data analysis, identify trends and make recommendations to improve measurement/control methods.Specific skill sets include: Mechanical aptitude, interacting with vendors and issuing corrective action reports, strong understanding of GD&T, experience with handling and characterizing optical components.AdvantagesWork with a world class organization.Excellent employee cultureExcellent opportunity for problem-solversResponsibilitiesInspection of mechanical and optical components, including:Cosmetic inspection and defect classification - direct/magnified using microscopes and imagingFirst article metrology using micrometers, gauges, Keyence VR, CMM.Optical coating performance measurement using spectrometers, hazemeters, etc.Material management: organize material inventory, support shipment of samples to and from vendors and company offices, Minimum set of skills: solid knowledge of metrology concepts and tools, understanding of quality control systems, ability program and use CMM, understanding of coordinate systems and how they apply to measuring components with complex geometry and datums, perform moderate data analysis, identify trends and make recommendations to improve measurement/control methods.Specific skill sets include: Mechanical aptitude, interacting with vendors and issuing corrective action reports, strong understanding of GD&T, experience with handling and characterizing optical components.QualificationsMandatorysolid knowledge of metrology concepts and tools, understanding of quality control systems, ability program and use CMM, understanding of coordinate systems and how they apply to measuring components with complex geometry and datums, perform moderate data analysis, identify trends and make recommendations to improve measurement/control methods.DesiredMechanical aptitude, interacting with vendors and issuing corrective action reports, strong understanding of GD&T, experience with handling and characterizing optical components.SummaryEmail resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you a experience working with inspection and metrology?Will a new role with a very appealing industry leader be of interest?If so, this could be the opportunity for you!Position will be a 12 month contract with an opportunity of longer term.Inspection of mechanical and optical components, including:Cosmetic inspection and defect classification - direct/magnified using microscopes and imagingFirst article metrology using micrometers, gauges, Keyence VR, CMM.Optical coating performance measurement using spectrometers, hazemeters, etc.Material management: organize material inventory, support shipment of samples to and from vendors and company offices, Minimum set of skills: solid knowledge of metrology concepts and tools, understanding of quality control systems, ability program and use CMM, understanding of coordinate systems and how they apply to measuring components with complex geometry and datums, perform moderate data analysis, identify trends and make recommendations to improve measurement/control methods.Specific skill sets include: Mechanical aptitude, interacting with vendors and issuing corrective action reports, strong understanding of GD&T, experience with handling and characterizing optical components.AdvantagesWork with a world class organization.Excellent employee cultureExcellent opportunity for problem-solversResponsibilitiesInspection of mechanical and optical components, including:Cosmetic inspection and defect classification - direct/magnified using microscopes and imagingFirst article metrology using micrometers, gauges, Keyence VR, CMM.Optical coating performance measurement using spectrometers, hazemeters, etc.Material management: organize material inventory, support shipment of samples to and from vendors and company offices, Minimum set of skills: solid knowledge of metrology concepts and tools, understanding of quality control systems, ability program and use CMM, understanding of coordinate systems and how they apply to measuring components with complex geometry and datums, perform moderate data analysis, identify trends and make recommendations to improve measurement/control methods.Specific skill sets include: Mechanical aptitude, interacting with vendors and issuing corrective action reports, strong understanding of GD&T, experience with handling and characterizing optical components.QualificationsMandatorysolid knowledge of metrology concepts and tools, understanding of quality control systems, ability program and use CMM, understanding of coordinate systems and how they apply to measuring components with complex geometry and datums, perform moderate data analysis, identify trends and make recommendations to improve measurement/control methods.DesiredMechanical aptitude, interacting with vendors and issuing corrective action reports, strong understanding of GD&T, experience with handling and characterizing optical components.SummaryEmail resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Brantford, Ontario
      • Permanent
      Are you a dynamic individual with a flair for working with projects in the fabrication sector?Are you knowledgeable with Engineering Drawings and a wizard with AutoCAD?If so, this could be the opportunity for you!Reporting to the Project Manager, this role will be focused on reviewing and updating Engineering CAD drawings to make sure things are as streamlined as possible.Will work with a wide variety of AutoCAD drawings Drawings consist of fabricated metal components and machineryDesigns have gotten a bit more complex over the years, so making sure revisions are done properlyWill be able to manage and update drawingsWorking with AutoCAD primarilyDrawings have been converted into AutoCAD, many were originally in InventorPerson will need to be comfortable with 3dSome understanding of BOMs is helpfulCompany uses Excel for BOMsWill be responsible for keeping files up to dateAdvantages- be a part of a dynamic company that is growing where you can be part of change and really make an impact!- work in a safe, clean and friendly workplace that has many long-term employees who have helped build our global success- company is an equal opportunity employer, committed to an inclusive, equitable, safe and accessible workplace.Benefits- Competitive wage based on experience- Benefit Plan including extended health care, dental, life coverage, LTD and STD- Group RRSPResponsibilitiesWill work with a number of AutoCAD drawings (roughly 2000 there)Designs have gotten a bit more complex over the years, so making sure revisions are done properlyWill be able to manage and update drawingsWorking with AutoCAD primarilyDrawings have been converted into AutoCAD, many were originally in InventorPerson will need to be comfortable with 3dSome understanding of BOMs is helpfulCompany uses Excel for BOMsWill be responsible for keeping files up to dateQualificationsCandidates should have a Diploma in Mechanical Engineering Technology or Structural Engineering TechnologyPrevious experience with AutoCADKnowledge of Inventor is an AssetMicrosoft ExcelSummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you a dynamic individual with a flair for working with projects in the fabrication sector?Are you knowledgeable with Engineering Drawings and a wizard with AutoCAD?If so, this could be the opportunity for you!Reporting to the Project Manager, this role will be focused on reviewing and updating Engineering CAD drawings to make sure things are as streamlined as possible.Will work with a wide variety of AutoCAD drawings Drawings consist of fabricated metal components and machineryDesigns have gotten a bit more complex over the years, so making sure revisions are done properlyWill be able to manage and update drawingsWorking with AutoCAD primarilyDrawings have been converted into AutoCAD, many were originally in InventorPerson will need to be comfortable with 3dSome understanding of BOMs is helpfulCompany uses Excel for BOMsWill be responsible for keeping files up to dateAdvantages- be a part of a dynamic company that is growing where you can be part of change and really make an impact!- work in a safe, clean and friendly workplace that has many long-term employees who have helped build our global success- company is an equal opportunity employer, committed to an inclusive, equitable, safe and accessible workplace.Benefits- Competitive wage based on experience- Benefit Plan including extended health care, dental, life coverage, LTD and STD- Group RRSPResponsibilitiesWill work with a number of AutoCAD drawings (roughly 2000 there)Designs have gotten a bit more complex over the years, so making sure revisions are done properlyWill be able to manage and update drawingsWorking with AutoCAD primarilyDrawings have been converted into AutoCAD, many were originally in InventorPerson will need to be comfortable with 3dSome understanding of BOMs is helpfulCompany uses Excel for BOMsWill be responsible for keeping files up to dateQualificationsCandidates should have a Diploma in Mechanical Engineering Technology or Structural Engineering TechnologyPrevious experience with AutoCADKnowledge of Inventor is an AssetMicrosoft ExcelSummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Edmonton, Alberta
      • Contract
      Job DescriptionProject Engineer III – SOLAR POWER PANEL ENGINEERCan be remote, anywhere (US or Canada)Contract – year or longerJob Reference No.: ENBJP00014513Our major client, an energy transportation company with a focus on transportation, distribution, and energy generation is urgently looking to fill a Solar Power Engineering position. The incumbent will be supporting a Solar Self Power Projects. We are looking for a well-rounded engineer with specific solar project experience and someone who has the ability to manage design reviews from design Consultant as well as providing their input throughout the 30%, 60%, 90%, IFC design phases.High-Level Description• The Senior Engineer oversees the design for facilities associated with solar power panel installations executed by third party engineering firms to ensure compliance with Company standards and specifications and industry standards and managed to the project budget and schedule. Liaison with other functional groups within Project Execution, Operations and Shared Services to ensure project and company requirements are achieved and incorporated into the design deliverables.• This person will be working closely with 2 Project Managers in order to lead Design Reviews and keep our Design Consultant on schedule as well as work with Supply Chain Management on Procurement Items reviewing material requisitions, compiling all information for RFPs for Supply Chain Management, entering requisitions into Oracle, reviewing any vendor drawings, and confirming shipping release and delivery dates/locations.Specific Accountabilities• Oversees the development of the project scope, schedule, capital cost estimate, execution planning, risks and supporting information related to solar power panel projects.• Ensures that all solar power facilities are designed in accordance with all regulations, applicable industry codes and corporate standards• Manages the execution of the design deliverables by a third-party engineering firm against the project budget and schedule• Reviews and approves design deliverables for example drawings, technical reports and material listing sheets• Reviews vendor materials quotations, prepares technical evaluations, and recommends to the supervisor selections based on technical merit along with price and delivery. For example, turbine/compressor packages, equipment vessels, buildings, pipe, valves and fittings• Leads the commissioning of newly installed facilities when required.• Reviews lessons learned from past projects and incorporates recommendations into future designs• Provide technical guidance to junior engineers within the team or others based upon technical expertise• Support and/or lead department initiatives as required• Ensures that development project scope definitions comply with all regulatory, environmental, health and safety requirements through effective management and coordination of internal functional groups• Provides support and assistance to peers and more senior staff in order to facilitate business initiatives and legal compliance, e.g., Engineering Projects, Law, Health, Safety and Environment, Operations, etc.Scope/Dimensions• Responsible for the successful operations of the assigned area with significant corporate financial impact.• Oversees the development and/or implementation of technical solutions, ensuring efficient coordination of technical resources and with other internal and external stakeholders.• Provides informal leadership to peers.Contacts (Working Relationships)• Project Manager – Weekly interaction to provide updated status on progress, cost, schedule, and risk.• Supervisor/Manager, Facilities Project Engineering – Daily to weekly interaction to provide project status update.• External Engineering Firm – Daily interaction to provide oversight on project design activities.• Operations – Weekly interaction to provide project status update and seek guidance on required design features.Knowledge, Skills & Abilities• experience in engineering/project management of large scale (10MW or more) Commercial or Industrial Solar Projects• experience in all aspects of a solar project including civil, piling/racking, AC/DC electrical, solar module, utility interconnection etc.• experience in either behind the meter or in front of the meter solar installations• good oral and written communication and organizational skills in order to lead engineered design review meetings and keep Engineering Consultants on schedule• need to provide input on the overall design of the Solar Self Power Facility Drawings so the Project Team can make informed decisions on key design features in procuring solar equipment and helping to develop Solar Project RFP’s• will be able to manage their time efficiently to keep costs down and provide status updates to the Project ManagerRequired:• • Engineering degree in an applicable discipline (preferably electrical)• 7 years of progressively responsible experience in engineering and project management• Solar power panel experiencePreferred:• Professional Engineer designation• Demonstrated ability to be innovative, initiate and manage change.• Capable of working independently, managing multiple projects and prioritizing tasks accordingly• Ability to resolve complex issues based on depth and breadth of technical and business knowledge• Awareness of interrelationships with other stakeholders both internal and external to the project team• Effectively communicate technical issues and impacts to other technical and non-technical staffWorking Conditions• Office environment• Stress levels can be above normal as project work is deadline oriented, highly visible and numerous activities are conducted concurrently• Overnight business trips to the field may be required, usually requires Personal Protective Equipment (PPE).If this sounds like the right role for you and you are confident at what you bring to the table, apply now!Although we appreciate all applications, only those that meet the minimum job qualifications will be considered for this role. We thank you all for your interest.Not the right fit this time? Follow us on our career’s social media pages!Interested candidate is also encouraged to submit a copy of the updated resume to Resource Manager, Geraldine Valiarayil at geraldine.valiarayil@randstad.ca, with the Job Order Number / Position Name in the subject line.AdvantagesThe company is a great place to work for and a great career opportunity to work with market leaders!Responsibilities• Oversees the development of the project scope, schedule, capital cost estimate, execution planning, risks and supporting information related to solar power panel projects.• Ensures that all solar power facilities are designed in accordance with all regulations, applicable industry codes and corporate standards• Manages the execution of the design deliverables by a third-party engineering firm against the project budget and schedule• Reviews and approves design deliverables for example drawings, technical reports and material listing sheets• Reviews vendor materials quotations, prepares technical evaluations, and recommends to the supervisor selections based on technical merit along with price and delivery. For example, turbine/compressor packages, equipment vessels, buildings, pipe, valves and fittings• Leads the commissioning of newly installed facilities when required.• Reviews lessons learned from past projects and incorporates recommendations into future designs• Provide technical guidance to junior engineers within the team or others based upon technical expertise• Support and/or lead department initiatives as required• Ensures that development project scope definitions comply with all regulatory, environmental, health and safety requirements through effective management and coordination of internal functional groups• Provides support and assistance to peers and more senior staff in order to facilitate business initiatives and legal compliance, e.g., Engineering Projects, Law, Health, Safety and Environment, Operations, etc.Qualifications• Engineering degree in an applicable discipline (preferably electrical)• 7 years of progressively responsible experience in engineering and project management• Solar power panel experienceSummary• The Senior Engineer oversees the design for facilities associated with solar power panel installations executed by third party engineering firms to ensure compliance with Company standards and specifications and industry standards and managed to the project budget and schedule. Liaison with other functional groups within Project Execution, Operations and Shared Services to ensure project and company requirements are achieved and incorporated into the design deliverables.• This person will be working closely with 2 Project Managers in order to lead Design Reviews and keep our Design Consultant on schedule as well as work with Supply Chain Management on Procurement Items reviewing material requisitions, compiling all information for RFPs for Supply Chain Management, entering requisitions into Oracle, reviewing any vendor drawings, and confirming shipping release and delivery dates/locations.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Job DescriptionProject Engineer III – SOLAR POWER PANEL ENGINEERCan be remote, anywhere (US or Canada)Contract – year or longerJob Reference No.: ENBJP00014513Our major client, an energy transportation company with a focus on transportation, distribution, and energy generation is urgently looking to fill a Solar Power Engineering position. The incumbent will be supporting a Solar Self Power Projects. We are looking for a well-rounded engineer with specific solar project experience and someone who has the ability to manage design reviews from design Consultant as well as providing their input throughout the 30%, 60%, 90%, IFC design phases.High-Level Description• The Senior Engineer oversees the design for facilities associated with solar power panel installations executed by third party engineering firms to ensure compliance with Company standards and specifications and industry standards and managed to the project budget and schedule. Liaison with other functional groups within Project Execution, Operations and Shared Services to ensure project and company requirements are achieved and incorporated into the design deliverables.• This person will be working closely with 2 Project Managers in order to lead Design Reviews and keep our Design Consultant on schedule as well as work with Supply Chain Management on Procurement Items reviewing material requisitions, compiling all information for RFPs for Supply Chain Management, entering requisitions into Oracle, reviewing any vendor drawings, and confirming shipping release and delivery dates/locations.Specific Accountabilities• Oversees the development of the project scope, schedule, capital cost estimate, execution planning, risks and supporting information related to solar power panel projects.• Ensures that all solar power facilities are designed in accordance with all regulations, applicable industry codes and corporate standards• Manages the execution of the design deliverables by a third-party engineering firm against the project budget and schedule• Reviews and approves design deliverables for example drawings, technical reports and material listing sheets• Reviews vendor materials quotations, prepares technical evaluations, and recommends to the supervisor selections based on technical merit along with price and delivery. For example, turbine/compressor packages, equipment vessels, buildings, pipe, valves and fittings• Leads the commissioning of newly installed facilities when required.• Reviews lessons learned from past projects and incorporates recommendations into future designs• Provide technical guidance to junior engineers within the team or others based upon technical expertise• Support and/or lead department initiatives as required• Ensures that development project scope definitions comply with all regulatory, environmental, health and safety requirements through effective management and coordination of internal functional groups• Provides support and assistance to peers and more senior staff in order to facilitate business initiatives and legal compliance, e.g., Engineering Projects, Law, Health, Safety and Environment, Operations, etc.Scope/Dimensions• Responsible for the successful operations of the assigned area with significant corporate financial impact.• Oversees the development and/or implementation of technical solutions, ensuring efficient coordination of technical resources and with other internal and external stakeholders.• Provides informal leadership to peers.Contacts (Working Relationships)• Project Manager – Weekly interaction to provide updated status on progress, cost, schedule, and risk.• Supervisor/Manager, Facilities Project Engineering – Daily to weekly interaction to provide project status update.• External Engineering Firm – Daily interaction to provide oversight on project design activities.• Operations – Weekly interaction to provide project status update and seek guidance on required design features.Knowledge, Skills & Abilities• experience in engineering/project management of large scale (10MW or more) Commercial or Industrial Solar Projects• experience in all aspects of a solar project including civil, piling/racking, AC/DC electrical, solar module, utility interconnection etc.• experience in either behind the meter or in front of the meter solar installations• good oral and written communication and organizational skills in order to lead engineered design review meetings and keep Engineering Consultants on schedule• need to provide input on the overall design of the Solar Self Power Facility Drawings so the Project Team can make informed decisions on key design features in procuring solar equipment and helping to develop Solar Project RFP’s• will be able to manage their time efficiently to keep costs down and provide status updates to the Project ManagerRequired:• • Engineering degree in an applicable discipline (preferably electrical)• 7 years of progressively responsible experience in engineering and project management• Solar power panel experiencePreferred:• Professional Engineer designation• Demonstrated ability to be innovative, initiate and manage change.• Capable of working independently, managing multiple projects and prioritizing tasks accordingly• Ability to resolve complex issues based on depth and breadth of technical and business knowledge• Awareness of interrelationships with other stakeholders both internal and external to the project team• Effectively communicate technical issues and impacts to other technical and non-technical staffWorking Conditions• Office environment• Stress levels can be above normal as project work is deadline oriented, highly visible and numerous activities are conducted concurrently• Overnight business trips to the field may be required, usually requires Personal Protective Equipment (PPE).If this sounds like the right role for you and you are confident at what you bring to the table, apply now!Although we appreciate all applications, only those that meet the minimum job qualifications will be considered for this role. We thank you all for your interest.Not the right fit this time? Follow us on our career’s social media pages!Interested candidate is also encouraged to submit a copy of the updated resume to Resource Manager, Geraldine Valiarayil at geraldine.valiarayil@randstad.ca, with the Job Order Number / Position Name in the subject line.AdvantagesThe company is a great place to work for and a great career opportunity to work with market leaders!Responsibilities• Oversees the development of the project scope, schedule, capital cost estimate, execution planning, risks and supporting information related to solar power panel projects.• Ensures that all solar power facilities are designed in accordance with all regulations, applicable industry codes and corporate standards• Manages the execution of the design deliverables by a third-party engineering firm against the project budget and schedule• Reviews and approves design deliverables for example drawings, technical reports and material listing sheets• Reviews vendor materials quotations, prepares technical evaluations, and recommends to the supervisor selections based on technical merit along with price and delivery. For example, turbine/compressor packages, equipment vessels, buildings, pipe, valves and fittings• Leads the commissioning of newly installed facilities when required.• Reviews lessons learned from past projects and incorporates recommendations into future designs• Provide technical guidance to junior engineers within the team or others based upon technical expertise• Support and/or lead department initiatives as required• Ensures that development project scope definitions comply with all regulatory, environmental, health and safety requirements through effective management and coordination of internal functional groups• Provides support and assistance to peers and more senior staff in order to facilitate business initiatives and legal compliance, e.g., Engineering Projects, Law, Health, Safety and Environment, Operations, etc.Qualifications• Engineering degree in an applicable discipline (preferably electrical)• 7 years of progressively responsible experience in engineering and project management• Solar power panel experienceSummary• The Senior Engineer oversees the design for facilities associated with solar power panel installations executed by third party engineering firms to ensure compliance with Company standards and specifications and industry standards and managed to the project budget and schedule. Liaison with other functional groups within Project Execution, Operations and Shared Services to ensure project and company requirements are achieved and incorporated into the design deliverables.• This person will be working closely with 2 Project Managers in order to lead Design Reviews and keep our Design Consultant on schedule as well as work with Supply Chain Management on Procurement Items reviewing material requisitions, compiling all information for RFPs for Supply Chain Management, entering requisitions into Oracle, reviewing any vendor drawings, and confirming shipping release and delivery dates/locations.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Oakville, Ontario
      • Permanent
      Are you a Project Engineer with an Electrical Background?Do you thrive with diverse projects and a dynamic environment?If so, this could be the opportunity for you!The Project Engineer is responsible for the design and specification of the electrical system on projects and initiatives.Create full design packages including BOM, detail drawings, assembly drawings and layoutsCheck & validate all final design documentation, parts lists, and drawings according to design & contract requirements, to ensure completeness & accuracyReview and interpret customer and vendor drawings and specificationsDesign or coordinate the design of the MCC, wiring schematics, and power distributionWrite, test, and commission PLC and HMI codePrepare contractor and scope of work instructionsPrepares electrical layout and detailed drawings and schematics.Interpret technical specifications & application parameters;Conceptualize new designs;Select cost-effective OEM components;Project work will require up to 35% travelAdvantagesTotal compensation includes competitive compensation, very comprehensive medical/dental programs as well as life insurance, and a generous paid time off program.ResponsibilitiesThe Project Engineer is responsible for the design and specification of the electrical system on projects and initiatives.Create full design packages including BOM, detail drawings, assembly drawings and layoutsCheck & validate all final design documentation, parts lists, and drawings according to design & contract requirements, to ensure completeness & accuracyReview and interpret customer and vendor drawings and specificationsDesign or coordinate the design of the MCC, wiring schematics, and power distributionWrite, test, and commission PLC and HMI codePrepare contractor and scope of work instructionsPrepares electrical layout and detailed drawings and schematics.Interpret technical specifications & application parameters;Conceptualize new designs;Select cost-effective OEM components;Qualifications7+ years of Electrical/Controls Engineering experienceBachelor’s degree in electrical engineering or equivalentP. Eng preferredExperience with automation production line design and working with end-users in a consulting capacity is a mustExperience with low voltage power distribution (600V).Experience with communications networksPLC programming experience in Allen Bradley and/or Siemens PLCs is required.Experience with industrial robots is an assetExperience with Factory Talk Studio or Wonderware would be preferred.Experience with servo system design and programming is preferred.Solid AutoCAD skills required.Good knowledge of North American electrical standards for equipment manufacturingMust have the ability to travel (particularly to the US) SummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positionsRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you a Project Engineer with an Electrical Background?Do you thrive with diverse projects and a dynamic environment?If so, this could be the opportunity for you!The Project Engineer is responsible for the design and specification of the electrical system on projects and initiatives.Create full design packages including BOM, detail drawings, assembly drawings and layoutsCheck & validate all final design documentation, parts lists, and drawings according to design & contract requirements, to ensure completeness & accuracyReview and interpret customer and vendor drawings and specificationsDesign or coordinate the design of the MCC, wiring schematics, and power distributionWrite, test, and commission PLC and HMI codePrepare contractor and scope of work instructionsPrepares electrical layout and detailed drawings and schematics.Interpret technical specifications & application parameters;Conceptualize new designs;Select cost-effective OEM components;Project work will require up to 35% travelAdvantagesTotal compensation includes competitive compensation, very comprehensive medical/dental programs as well as life insurance, and a generous paid time off program.ResponsibilitiesThe Project Engineer is responsible for the design and specification of the electrical system on projects and initiatives.Create full design packages including BOM, detail drawings, assembly drawings and layoutsCheck & validate all final design documentation, parts lists, and drawings according to design & contract requirements, to ensure completeness & accuracyReview and interpret customer and vendor drawings and specificationsDesign or coordinate the design of the MCC, wiring schematics, and power distributionWrite, test, and commission PLC and HMI codePrepare contractor and scope of work instructionsPrepares electrical layout and detailed drawings and schematics.Interpret technical specifications & application parameters;Conceptualize new designs;Select cost-effective OEM components;Qualifications7+ years of Electrical/Controls Engineering experienceBachelor’s degree in electrical engineering or equivalentP. Eng preferredExperience with automation production line design and working with end-users in a consulting capacity is a mustExperience with low voltage power distribution (600V).Experience with communications networksPLC programming experience in Allen Bradley and/or Siemens PLCs is required.Experience with industrial robots is an assetExperience with Factory Talk Studio or Wonderware would be preferred.Experience with servo system design and programming is preferred.Solid AutoCAD skills required.Good knowledge of North American electrical standards for equipment manufacturingMust have the ability to travel (particularly to the US) SummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positionsRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Vancouver, British Columbia
      • Permanent
      We are seeking an experienced Operations Manager for a well established food manufacturing client of ours in the Vancouver area. The Operations Manager is primarily accountable for the day-to-day operations of production departments and performs a wide variety of duties in order to plan, organize and coordinate production departments and oversee several team leaders in supporting a safe and efficient operations. Advantages-Excellent compensation and benefits-Well established company-Opportunities for advancementResponsibilities•Execute plant-specific vision and mission to assure continuous improvement and alignment with the corporate vision.• Direct and oversee all production supervisors and their roles and responsibilities throughout the day.• Drive employee engagement, training, and development to maximize manufacturing, quality, safety, and productivity goal attainment.• Assess, improve and facilitate continuous improvement projects to reduce cost, improve quality and efficiency of current processes.• Apply Lean Manufacturing tools and technology..• Communicate results and action plans to all employees and managers.• Temporarily fill role of Plant Manager if needed.• Collaborate directly with production planning and materials management to optimize scheduled attainment and customer service.• Communicate directly with Human Resources to ensure employee issues or concerns are correctly addressed and resolved.• Collaborate with finance to create and execute a capital budget to ensure that financial allocations and obligations are set, administered, and met.• Initiate cost savings measures relating to crewing, standards, and yields.• Ensure that all plant operations are conducted in a safe and controlled environment.• Ensure all quality and regulatory standards, specifications, and policies are met or exceeded.• Responsible for reporting any food safety issues to supervision.Qualifications• Bachelor’s Degree in Business, Industrial Management, Engineering, Food Science, Management, Product Operations, or equivalent field of study.• Continuous Improvement and Lean Manufacturing training.• 5 years of manufacturing experience with demonstrated ability to lead all areas of fast paced food manufacturing plant.• 3-5 years Management / Supervisory experience.• Proven Continuous Improvement and Lean Manufacturing application experience.• Strong analytical skills using tools such as statistics, downtime tracking, mechanical history, project planning to identify opportunity areas.• Creative in problem solving and innovative approaches to resolve complex problems.• Strong computer application skills, including the utilization of mainframe, network, and PC business application software.• Excellent communication, presentation, and negotiation skills.SummaryIf you would like to be considered for this opportunity please forward you resume via email to Nick Paraskeva | nick.paraskeva@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      We are seeking an experienced Operations Manager for a well established food manufacturing client of ours in the Vancouver area. The Operations Manager is primarily accountable for the day-to-day operations of production departments and performs a wide variety of duties in order to plan, organize and coordinate production departments and oversee several team leaders in supporting a safe and efficient operations. Advantages-Excellent compensation and benefits-Well established company-Opportunities for advancementResponsibilities•Execute plant-specific vision and mission to assure continuous improvement and alignment with the corporate vision.• Direct and oversee all production supervisors and their roles and responsibilities throughout the day.• Drive employee engagement, training, and development to maximize manufacturing, quality, safety, and productivity goal attainment.• Assess, improve and facilitate continuous improvement projects to reduce cost, improve quality and efficiency of current processes.• Apply Lean Manufacturing tools and technology..• Communicate results and action plans to all employees and managers.• Temporarily fill role of Plant Manager if needed.• Collaborate directly with production planning and materials management to optimize scheduled attainment and customer service.• Communicate directly with Human Resources to ensure employee issues or concerns are correctly addressed and resolved.• Collaborate with finance to create and execute a capital budget to ensure that financial allocations and obligations are set, administered, and met.• Initiate cost savings measures relating to crewing, standards, and yields.• Ensure that all plant operations are conducted in a safe and controlled environment.• Ensure all quality and regulatory standards, specifications, and policies are met or exceeded.• Responsible for reporting any food safety issues to supervision.Qualifications• Bachelor’s Degree in Business, Industrial Management, Engineering, Food Science, Management, Product Operations, or equivalent field of study.• Continuous Improvement and Lean Manufacturing training.• 5 years of manufacturing experience with demonstrated ability to lead all areas of fast paced food manufacturing plant.• 3-5 years Management / Supervisory experience.• Proven Continuous Improvement and Lean Manufacturing application experience.• Strong analytical skills using tools such as statistics, downtime tracking, mechanical history, project planning to identify opportunity areas.• Creative in problem solving and innovative approaches to resolve complex problems.• Strong computer application skills, including the utilization of mainframe, network, and PC business application software.• Excellent communication, presentation, and negotiation skills.SummaryIf you would like to be considered for this opportunity please forward you resume via email to Nick Paraskeva | nick.paraskeva@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • London, Ontario
      • Permanent
      Our client in London, ON has partnered with Randstad Engineering in their search for a Mechanical Draftsperson to join their growing team! This role will include collaboration with engineers and designers to produce drawings for permit and construction in the industrial, commercial, and residential and institutional sectors.AdvantagesThis is a permanent opportunity with a full service engineering organization that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, performance bonus potential, RRSP Matching Program, Benefits, Vacation and Flexibility.Responsibilities-Reporting to Mechanical Lead and Division Manager-Drafting of mechanical systems and components-Coordinating with the engineering team and other design teams-Ability to provide technical guidance to other designers, technologists and junior staff-Supporting the engineering team's analysis, evaluations, designs, and implementation -Occasional site visits -Collaborating with design team and contractors to resolve construction issuesQualifications3-5 years of relatable experience (Specifically plumbing and HVAC design)Diploma in Architectural Technology or equivalentHigh level of proficiency in MS Office and AutoCAD; REVIT considered an assetAbility to work both independently with little supervision and in a team environmentStrong problem-solving skills and initiativeCommitment to ongoing professional growthSummaryIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our client in London, ON has partnered with Randstad Engineering in their search for a Mechanical Draftsperson to join their growing team! This role will include collaboration with engineers and designers to produce drawings for permit and construction in the industrial, commercial, and residential and institutional sectors.AdvantagesThis is a permanent opportunity with a full service engineering organization that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, performance bonus potential, RRSP Matching Program, Benefits, Vacation and Flexibility.Responsibilities-Reporting to Mechanical Lead and Division Manager-Drafting of mechanical systems and components-Coordinating with the engineering team and other design teams-Ability to provide technical guidance to other designers, technologists and junior staff-Supporting the engineering team's analysis, evaluations, designs, and implementation -Occasional site visits -Collaborating with design team and contractors to resolve construction issuesQualifications3-5 years of relatable experience (Specifically plumbing and HVAC design)Diploma in Architectural Technology or equivalentHigh level of proficiency in MS Office and AutoCAD; REVIT considered an assetAbility to work both independently with little supervision and in a team environmentStrong problem-solving skills and initiativeCommitment to ongoing professional growthSummaryIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Barrie, Ontario
      • Permanent
      Our Plastics machinery manufacturing client has partnered with Randstad Engineering in their search for a Field Service Engineer / Technician to join the injection moulding aftersales department.Title - Field Service Engineer /Service Technician (Plastic Injection Molding)Location - Ontario Travelling to customer's locations. Salary - Flexible as per experience and qualification.Industry - Injection mouldingIf you are interested in this opportunity, apply today online or send your resume directly to Ankur Vaid at ankur.vaid@randstad.caUnder the supervision of the Area Service Manager, the incumbent is responsible for machine startup, repair service, and/or provides other technical assistance at the customer’s facility to ensure customer satisfaction. The incumbent is required to follow the guidelines set forth in the Field Service Engineer GuidelinesAdvantagesThis is a permanent opportunity, with a competitive compensation package in a thriving environment.Responsibilities75 % of Time Core Functions/Duties Adheres to daily schedule provided by Area Service Manager to visit and service customers’ machinery.• Troubleshoots electrical, hydraulic and mechanical problems leaving the customer with the assurance that the problem has been or will be resolved.• For new injection molding machines: starts up, provides molding assistance, and gives hands on operator and maintenance training.• Responsible for timely and accurate field service report specific to all services on site, problems incurred, safety violations noted, hours and expenses.• Responsible for all the proper use and care of all company-issued tooling, property, and proprietary information.25% % of Time Core Functions/DutiesResponsible for projecting a positive image to the customer by having a positive attitude, personal appearance, and the highest level of professionalism that must be consistent with company guidelines.• Generates clear, concise, accurate and complete field service reports, expense reports, and timely return of those reports to the home office.• Schedules time and makes travel arrangements consistent with the department’s objectives of controlling costs, and travel and living expenses.• Provides temporary phone coverage for technical support and/or manager while there is a vacancy due to vacation and/or illness.KEY ACCOUNTABILITIES: Performance will be measured based on the position accountabilities.• Provides onsite machine support via part replacement, troubleshooting, or maintenance of all brands• Accurate service reporting and documentation of all relevant service items per job, customer, machine.QualificationsEDUCATION AND EXPERIENCE:Required:• Two-year technical degree in the field of electronics, or equivalent experience in the plastics industry.• 5 years of Demonstrated field service experience or equivalent experience in the area of troubleshooting and repair of injection molding machines.Preferred:• Bachelor’s degree in a technical field.WORK ENVIRONMENT: • Must be able to assemble or disassemble mechanical components of the injection molding machine.• Must be able to analyze problems on running or downed machines, sometimes in a hot, dusty or noisy environment.• May be exposed to fumes from plastics or other various chemicals.TRAVEL: • Must travel extensively to customer locations. This may require overnight stays for extended periods of time.• Must possess a valid driver’s license.• Must not have travel restrictions.• Up to 90% travel requiredSummaryIf you are interested in this opportunity, apply today online or send your resume directly to Ankur Vaid at ankur.vaid@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our Plastics machinery manufacturing client has partnered with Randstad Engineering in their search for a Field Service Engineer / Technician to join the injection moulding aftersales department.Title - Field Service Engineer /Service Technician (Plastic Injection Molding)Location - Ontario Travelling to customer's locations. Salary - Flexible as per experience and qualification.Industry - Injection mouldingIf you are interested in this opportunity, apply today online or send your resume directly to Ankur Vaid at ankur.vaid@randstad.caUnder the supervision of the Area Service Manager, the incumbent is responsible for machine startup, repair service, and/or provides other technical assistance at the customer’s facility to ensure customer satisfaction. The incumbent is required to follow the guidelines set forth in the Field Service Engineer GuidelinesAdvantagesThis is a permanent opportunity, with a competitive compensation package in a thriving environment.Responsibilities75 % of Time Core Functions/Duties Adheres to daily schedule provided by Area Service Manager to visit and service customers’ machinery.• Troubleshoots electrical, hydraulic and mechanical problems leaving the customer with the assurance that the problem has been or will be resolved.• For new injection molding machines: starts up, provides molding assistance, and gives hands on operator and maintenance training.• Responsible for timely and accurate field service report specific to all services on site, problems incurred, safety violations noted, hours and expenses.• Responsible for all the proper use and care of all company-issued tooling, property, and proprietary information.25% % of Time Core Functions/DutiesResponsible for projecting a positive image to the customer by having a positive attitude, personal appearance, and the highest level of professionalism that must be consistent with company guidelines.• Generates clear, concise, accurate and complete field service reports, expense reports, and timely return of those reports to the home office.• Schedules time and makes travel arrangements consistent with the department’s objectives of controlling costs, and travel and living expenses.• Provides temporary phone coverage for technical support and/or manager while there is a vacancy due to vacation and/or illness.KEY ACCOUNTABILITIES: Performance will be measured based on the position accountabilities.• Provides onsite machine support via part replacement, troubleshooting, or maintenance of all brands• Accurate service reporting and documentation of all relevant service items per job, customer, machine.QualificationsEDUCATION AND EXPERIENCE:Required:• Two-year technical degree in the field of electronics, or equivalent experience in the plastics industry.• 5 years of Demonstrated field service experience or equivalent experience in the area of troubleshooting and repair of injection molding machines.Preferred:• Bachelor’s degree in a technical field.WORK ENVIRONMENT: • Must be able to assemble or disassemble mechanical components of the injection molding machine.• Must be able to analyze problems on running or downed machines, sometimes in a hot, dusty or noisy environment.• May be exposed to fumes from plastics or other various chemicals.TRAVEL: • Must travel extensively to customer locations. This may require overnight stays for extended periods of time.• Must possess a valid driver’s license.• Must not have travel restrictions.• Up to 90% travel requiredSummaryIf you are interested in this opportunity, apply today online or send your resume directly to Ankur Vaid at ankur.vaid@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Markham, Ontario
      • Permanent
      Our client, is currently looking for a Project Manager - Architecture. This is an exciting opportunity to take your career to the next level.Responsibilities:Responsible for leading a team of drafters and designers on a major commercial retail client.Responsible for working with the client and updating them on the status of the project on a daily basis. Overseeing all working drawing sets including contract administration documents.Education :An architectural degree/diploma 7-10 years of experience in project management/contract administration Strong CAD skills in Revit and AutoCADStrong communication skills including client relations. Travel will be required across CanadaPlease send your resume in confidence to paul.dusome@randstad.ca AdvantagesRetail experience Strong client communication skills Strong leadership skillsResponsibilitiesOur client, is currently looking for a Project Manager - Architecture. This is an exciting opportunity to take your career to the next level.Responsibilities:Responsible for leading a team of drafters and designers on a major commercial retail client.Responsible for working with the client and updating them on the status of the project on a daily basis. Overseeing all working drawing sets including contract administration documents.Education :An architectural degree/diploma 7-10 years of experience in project management/contract administration Strong CAD skills in Revit and AutoCADStrong communication skills including client relations. Travel will be required across CanadaPlease send your resume in confidence to paul.dusome@randstad.ca QualificationsEducation :An architectural degree/diploma 7-10 years of experience in project management/contract administration Strong CAD skills in Revit and AutoCADStrong communication skills including client relations. Travel will be required across CanadaSummaryOur client, is currently looking for a Project Manager - Architecture. This is an exciting opportunity to take your career to the next level.Responsibilities:Responsible for leading a team of drafters and designers on a major commercial retail client.Responsible for working with the client and updating them on the status of the project on a daily basis. Overseeing all working drawing sets including contract administration documents.Education :An architectural degree/diploma 7-10 years of experience in project management/contract administration Strong CAD skills in Revit and AutoCADStrong communication skills including client relations. Travel will be required across CanadaPlease send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our client, is currently looking for a Project Manager - Architecture. This is an exciting opportunity to take your career to the next level.Responsibilities:Responsible for leading a team of drafters and designers on a major commercial retail client.Responsible for working with the client and updating them on the status of the project on a daily basis. Overseeing all working drawing sets including contract administration documents.Education :An architectural degree/diploma 7-10 years of experience in project management/contract administration Strong CAD skills in Revit and AutoCADStrong communication skills including client relations. Travel will be required across CanadaPlease send your resume in confidence to paul.dusome@randstad.ca AdvantagesRetail experience Strong client communication skills Strong leadership skillsResponsibilitiesOur client, is currently looking for a Project Manager - Architecture. This is an exciting opportunity to take your career to the next level.Responsibilities:Responsible for leading a team of drafters and designers on a major commercial retail client.Responsible for working with the client and updating them on the status of the project on a daily basis. Overseeing all working drawing sets including contract administration documents.Education :An architectural degree/diploma 7-10 years of experience in project management/contract administration Strong CAD skills in Revit and AutoCADStrong communication skills including client relations. Travel will be required across CanadaPlease send your resume in confidence to paul.dusome@randstad.ca QualificationsEducation :An architectural degree/diploma 7-10 years of experience in project management/contract administration Strong CAD skills in Revit and AutoCADStrong communication skills including client relations. Travel will be required across CanadaSummaryOur client, is currently looking for a Project Manager - Architecture. This is an exciting opportunity to take your career to the next level.Responsibilities:Responsible for leading a team of drafters and designers on a major commercial retail client.Responsible for working with the client and updating them on the status of the project on a daily basis. Overseeing all working drawing sets including contract administration documents.Education :An architectural degree/diploma 7-10 years of experience in project management/contract administration Strong CAD skills in Revit and AutoCADStrong communication skills including client relations. Travel will be required across CanadaPlease send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      Responsibilities: The role resides in the Integrity Data Assessment team in Integrity which focuses on risk modelling and assessment, data governance, and software administration for all types of assets in Integrity.This contract position will be dedicated to a multi-year integration project to integrate Legacy Union TIMP pipelines into the Pipeline Risk and Integrity Management (PRIM) software; the team is looking for a highly motivated and technically sound Engineering Analyst to perform the following duties:• Conduct detailed checks of converted pipeline dataset to ensure they meet reporting standards and accurately reflect the pipeline specifications• Review Engineering drawings, bill of materials, other company records to validate pipeline specifications• Review and assess pipeline Non-Destructive Testing (NDT) records and digitize pertinent information using the PRIM software package.• Create and manipulate GIS dataset using satellite imagery and basic tools in ESRI ArcMap software package• Obtain a technical understanding of Integrity documents and processes to drive improvements to the data supporting Integrity and Risk assessments.MUST HAVE qualifications:• Technology diploma, Engineering degree, or experience with Enbridge records• Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsNICE TO HAVE qualifications:• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Knowledge of Enbridge Gas Inc. policy and procedures• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesPlease send your resume in confidence to paul.dusome@randstad.caAdvantages• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesResponsibilitiesResponsibilities:The role resides in the Integrity Data Assessment team in Integrity which focuses on risk modelling and assessment, data governance, and software administration for all types of assets in Integrity.This contract position will be dedicated to a multi-year integration project to integrate Legacy Union TIMP pipelines into the Pipeline Risk and Integrity Management (PRIM) software; the team is looking for a highly motivated and technically sound Engineering Analyst to perform the following duties:• Conduct detailed checks of converted pipeline dataset to ensure they meet reporting standards and accurately reflect the pipeline specifications• Review Engineering drawings, bill of materials, other company records to validate pipeline specifications• Review and assess pipeline Non-Destructive Testing (NDT) records and digitize pertinent information using the PRIM software package.• Create and manipulate GIS dataset using satellite imagery and basic tools in ESRI ArcMap software package• Obtain a technical understanding of Integrity documents and processes to drive improvements to the data supporting Integrity and Risk assessments.MUST HAVE qualifications:• Technology diploma, Engineering degree, or experience with Enbridge records• Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsNICE TO HAVE qualifications:• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Knowledge of Enbridge Gas Inc. policy and procedures• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesPlease send your resume in confidence to paul.dusome@randstad.caQualifications• Technology diploma, Engineering degree, • Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsSummaryResponsibilities:The role resides in the Integrity Data Assessment team in Integrity which focuses on risk modelling and assessment, data governance, and software administration for all types of assets in Integrity.This contract position will be dedicated to a multi-year integration project to integrate Legacy Union TIMP pipelines into the Pipeline Risk and Integrity Management (PRIM) software; the team is looking for a highly motivated and technically sound Engineering Analyst to perform the following duties:• Conduct detailed checks of converted pipeline dataset to ensure they meet reporting standards and accurately reflect the pipeline specifications• Review Engineering drawings, bill of materials, other company records to validate pipeline specifications• Review and assess pipeline Non-Destructive Testing (NDT) records and digitize pertinent information using the PRIM software package.• Create and manipulate GIS dataset using satellite imagery and basic tools in ESRI ArcMap software package• Obtain a technical understanding of Integrity documents and processes to drive improvements to the data supporting Integrity and Risk assessments.MUST HAVE qualifications:• Technology diploma, Engineering degree, or experience with Enbridge records• Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsNICE TO HAVE qualifications:• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Knowledge of Enbridge Gas Inc. policy and procedures• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesPlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Responsibilities: The role resides in the Integrity Data Assessment team in Integrity which focuses on risk modelling and assessment, data governance, and software administration for all types of assets in Integrity.This contract position will be dedicated to a multi-year integration project to integrate Legacy Union TIMP pipelines into the Pipeline Risk and Integrity Management (PRIM) software; the team is looking for a highly motivated and technically sound Engineering Analyst to perform the following duties:• Conduct detailed checks of converted pipeline dataset to ensure they meet reporting standards and accurately reflect the pipeline specifications• Review Engineering drawings, bill of materials, other company records to validate pipeline specifications• Review and assess pipeline Non-Destructive Testing (NDT) records and digitize pertinent information using the PRIM software package.• Create and manipulate GIS dataset using satellite imagery and basic tools in ESRI ArcMap software package• Obtain a technical understanding of Integrity documents and processes to drive improvements to the data supporting Integrity and Risk assessments.MUST HAVE qualifications:• Technology diploma, Engineering degree, or experience with Enbridge records• Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsNICE TO HAVE qualifications:• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Knowledge of Enbridge Gas Inc. policy and procedures• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesPlease send your resume in confidence to paul.dusome@randstad.caAdvantages• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesResponsibilitiesResponsibilities:The role resides in the Integrity Data Assessment team in Integrity which focuses on risk modelling and assessment, data governance, and software administration for all types of assets in Integrity.This contract position will be dedicated to a multi-year integration project to integrate Legacy Union TIMP pipelines into the Pipeline Risk and Integrity Management (PRIM) software; the team is looking for a highly motivated and technically sound Engineering Analyst to perform the following duties:• Conduct detailed checks of converted pipeline dataset to ensure they meet reporting standards and accurately reflect the pipeline specifications• Review Engineering drawings, bill of materials, other company records to validate pipeline specifications• Review and assess pipeline Non-Destructive Testing (NDT) records and digitize pertinent information using the PRIM software package.• Create and manipulate GIS dataset using satellite imagery and basic tools in ESRI ArcMap software package• Obtain a technical understanding of Integrity documents and processes to drive improvements to the data supporting Integrity and Risk assessments.MUST HAVE qualifications:• Technology diploma, Engineering degree, or experience with Enbridge records• Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsNICE TO HAVE qualifications:• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Knowledge of Enbridge Gas Inc. policy and procedures• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesPlease send your resume in confidence to paul.dusome@randstad.caQualifications• Technology diploma, Engineering degree, • Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsSummaryResponsibilities:The role resides in the Integrity Data Assessment team in Integrity which focuses on risk modelling and assessment, data governance, and software administration for all types of assets in Integrity.This contract position will be dedicated to a multi-year integration project to integrate Legacy Union TIMP pipelines into the Pipeline Risk and Integrity Management (PRIM) software; the team is looking for a highly motivated and technically sound Engineering Analyst to perform the following duties:• Conduct detailed checks of converted pipeline dataset to ensure they meet reporting standards and accurately reflect the pipeline specifications• Review Engineering drawings, bill of materials, other company records to validate pipeline specifications• Review and assess pipeline Non-Destructive Testing (NDT) records and digitize pertinent information using the PRIM software package.• Create and manipulate GIS dataset using satellite imagery and basic tools in ESRI ArcMap software package• Obtain a technical understanding of Integrity documents and processes to drive improvements to the data supporting Integrity and Risk assessments.MUST HAVE qualifications:• Technology diploma, Engineering degree, or experience with Enbridge records• Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsNICE TO HAVE qualifications:• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Knowledge of Enbridge Gas Inc. policy and procedures• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesPlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Mississauga, Ontario
      • Permanent
      Are you an Applications Engineer looking for a new challenge?Do you have a background in Hydraulic systems?Would you like to join a growing organization with many advantages?If so, this could be the opportunity for you!Ideal candidate will have a minimum 5 to 10 years of experience designing, quoting and developing electrohydraulic and mechanical design projects. The candidate must have the ability to work with customers to gather requirements; define functional specifications, block diagrams, hydraulic schematics; define, locate and acquire material required to assemble project; estimate material and labor cost; develop work instructions for manufacturing assembly and test. Applicant must have experience troubleshooting and repairing hydraulic systems. Experience with utilizing control automation to operate PLC or computer based hydraulic control system is considered a plus. AdvantagesCompetitive SalaryRRSP ProgramCompany BenefitsChance to work in a dynamic industry with a wide variety of clients.ResponsibilitiesGeneral Duties:•The position will work closely with account managers to establish customer requirements and design documents for Hydraulic projects. The Application Engineer’s role is to interpret the customer’s requirements and lead the design effort to optimize the project scope and design to meet those requirements. •The Application Engineer will produce conceptual designs, block diagrams, functional specifications and schematics to evaluate design alternatives and tradeoffs to meet customer requirements. The technician with make recommendations for final design and budget based on customer requirements, customer budget, schedule constraints and competitive pressures.•Work on the development of designs that are efficient in design, extendable, clearly and frequently documented, and adheres to standards and conventions. Design for manufacturability and testability. Deliver designs without error, that correctly performs all the specified functions, leverages available Hydraulic and component technologies, and that incorporates designs available for reuse. •As a design project lead, the application engineers is responsible for defining, locating and acquiring material required to complete the assembly of their project. This work is completed by working with Hydra-Fab purchasing personnel to acquire the correct material, at the desired cost on the specific delivery date to meet the customer’s overall request for the project delivery date.•Provide engineering release documentation to the manufacturing team to enable production of the final product. This includes functional specifications, schematics, bill of material, manufacturing work instructions, test procedures and operating manuals. Work with the manufacturing team to address problems during the assembly and test process to ensure project is completed according to the production and delivery schedule.•Working with the manufacturing team, complete thorough system tests to ensure that designs work properly for all possible operating conditions including nominal, upper and lower limits. Support and maintain design through unit test, final integration test and quality testing through release to customer. •Assist the work planning and estimation efforts to develop project schedules and project budgets for Hydraulic development projects; execute to deliver the project per delivery schedule and budget. •Attend internal project review meetings to review technical designs and plans including project budget and delivery schedule, address technical concerns identified during reviews and any roadblocks impacting cost and delivery. •Participate in continuing engineering efforts by understanding customer service issues reported through the field service escalation process and assist engineering management in the resource allocation process for addressing such concerns.•Participate in understanding and defining key engineering processes. Analyzing each process to identify how it can be continuously improved to make the engineering team overall more effective. QualificationsWork Experience Requirements:•Five or more years’ experience in the design and application of fluid power systems.•Experience in AutoCad creating and drawing hydraulic schematics.Education Requirements:•College diploma.Special Skill Requirements:•Forklift license.•Machinist certification.•CAD/CAM.On-The-Job/Operational Training Requirements:•ERP System.•Product identification.•Machine maintenance.•Picking material.•Trouble shooting.•Inspection.•Non-conforming product.•Calibration.•Etc.SummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you an Applications Engineer looking for a new challenge?Do you have a background in Hydraulic systems?Would you like to join a growing organization with many advantages?If so, this could be the opportunity for you!Ideal candidate will have a minimum 5 to 10 years of experience designing, quoting and developing electrohydraulic and mechanical design projects. The candidate must have the ability to work with customers to gather requirements; define functional specifications, block diagrams, hydraulic schematics; define, locate and acquire material required to assemble project; estimate material and labor cost; develop work instructions for manufacturing assembly and test. Applicant must have experience troubleshooting and repairing hydraulic systems. Experience with utilizing control automation to operate PLC or computer based hydraulic control system is considered a plus. AdvantagesCompetitive SalaryRRSP ProgramCompany BenefitsChance to work in a dynamic industry with a wide variety of clients.ResponsibilitiesGeneral Duties:•The position will work closely with account managers to establish customer requirements and design documents for Hydraulic projects. The Application Engineer’s role is to interpret the customer’s requirements and lead the design effort to optimize the project scope and design to meet those requirements. •The Application Engineer will produce conceptual designs, block diagrams, functional specifications and schematics to evaluate design alternatives and tradeoffs to meet customer requirements. The technician with make recommendations for final design and budget based on customer requirements, customer budget, schedule constraints and competitive pressures.•Work on the development of designs that are efficient in design, extendable, clearly and frequently documented, and adheres to standards and conventions. Design for manufacturability and testability. Deliver designs without error, that correctly performs all the specified functions, leverages available Hydraulic and component technologies, and that incorporates designs available for reuse. •As a design project lead, the application engineers is responsible for defining, locating and acquiring material required to complete the assembly of their project. This work is completed by working with Hydra-Fab purchasing personnel to acquire the correct material, at the desired cost on the specific delivery date to meet the customer’s overall request for the project delivery date.•Provide engineering release documentation to the manufacturing team to enable production of the final product. This includes functional specifications, schematics, bill of material, manufacturing work instructions, test procedures and operating manuals. Work with the manufacturing team to address problems during the assembly and test process to ensure project is completed according to the production and delivery schedule.•Working with the manufacturing team, complete thorough system tests to ensure that designs work properly for all possible operating conditions including nominal, upper and lower limits. Support and maintain design through unit test, final integration test and quality testing through release to customer. •Assist the work planning and estimation efforts to develop project schedules and project budgets for Hydraulic development projects; execute to deliver the project per delivery schedule and budget. •Attend internal project review meetings to review technical designs and plans including project budget and delivery schedule, address technical concerns identified during reviews and any roadblocks impacting cost and delivery. •Participate in continuing engineering efforts by understanding customer service issues reported through the field service escalation process and assist engineering management in the resource allocation process for addressing such concerns.•Participate in understanding and defining key engineering processes. Analyzing each process to identify how it can be continuously improved to make the engineering team overall more effective. QualificationsWork Experience Requirements:•Five or more years’ experience in the design and application of fluid power systems.•Experience in AutoCad creating and drawing hydraulic schematics.Education Requirements:•College diploma.Special Skill Requirements:•Forklift license.•Machinist certification.•CAD/CAM.On-The-Job/Operational Training Requirements:•ERP System.•Product identification.•Machine maintenance.•Picking material.•Trouble shooting.•Inspection.•Non-conforming product.•Calibration.•Etc.SummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    12 of 220 jobs seen

    Thank you for subscribing to your personalised job alerts.

    explore over 12418 jobs with randstad.

    It looks like you want to switch your language. This will reset your filters on your current job search.