Are you anElectrical Engineer with adequate experience in electronic systems and power distribution? This 6-month role with chances of extension maybe a good fit for you.
...
The Electrical Engineer - Power Electronics is responsible for the design, development, testing, validation, troubleshooting, and commissioning of power electronic systems and electrical power distribution solutions. This role combines electrical engineering expertise with hands-on laboratory testing, product verification, root cause analysis, and cross-functional collaboration to ensure products meet performance, safety, quality, regulatory, and customer requirements. The engineer will support all phases of the product lifecycle, from concept development through testing, validation, deployment, and continuous improvement.
Advantages
Contract: 6 months with potential to extend
This role is focused on electrical engineering with in power electronics- must have EE degree and skills with testing tools in a lab environment.
Responsibilities
Key Responsibilities
Power Electronics Design & Development
Design and develop power electronic systems, converters, inverters, rectifiers, UPS systems, battery energy storage interfaces, and power distribution equipment.
Generate and review electrical schematics, wiring diagrams, one-line diagrams, and system documentation.
Perform electrical calculations, component selection, and design verification activities.
Support design optimization activities to improve reliability, efficiency, manufacturability, and product performance.
Ensure compliance with electrical codes, industry standards, and safety requirements.
Electrical Testing & Validation
Develop and execute validation plans, verification procedures, and qualification testing for power electronic systems.
Create complex test methods and test protocols to evaluate electrical performance and product reliability.
Conduct functional, environmental, electrical, thermal, and performance testing.
Design and develop test fixtures and automated test setups.
Analyze test data and prepare technical reports documenting findings and recommendations.
Verify product performance against specifications, customer requirements, and applicable standards.
Support root cause investigations and corrective action implementation for electrical failures and quality concerns.
Commissioning & Troubleshooting
Perform commissioning, startup, troubleshooting, and field support activities.
Diagnose electrical, power electronic, and control system failures.
Utilize advanced diagnostic tools to identify performance issues and optimize system operation.
Collaborate with field service, manufacturing, quality, and engineering teams to resolve complex technical issues.
Support customer acceptance testing and factory acceptance testing (FAT/SAT).
Project & Technical Leadership
Lead engineering tasks from concept through deployment.
Coordinate with multidisciplinary teams including design, software, controls, manufacturing, quality, and test engineering.
Identify technical risks and develop mitigation plans.
Participate in design reviews, technical audits, and product improvement initiatives.
Provide technical guidance to junior engineers and technicians.
Power Testing Tools & Equipment (Required Experience)
Qualifications
Minimum Qualifications
Bachelor's Degree in Electrical Engineering (BSEE) required.
Master's Degree in Electrical Engineering, Power Electronics, Energy Systems, Electronics Engineering, Mechatronics Engineering, or related engineering discipline preferred.
Professional Engineer (P.Eng.) designation or eligibility considered an asset.
3+ years of experience in power electronics, electrical design, testing, validation, or power systems engineering.
Experience working in laboratory, manufacturing, R&D, utility, industrial, renewable energy, or power distribution environments.
Candidates should possess hands-on experience with electrical laboratory testing equipment, including:
Power Sources & Loads
AC Power Sources
DC Power Supplies
Programmable Power Supplies
Electronic Loads
Variable Frequency Drives (VFDs)
Autotransformers
Battery Simulators
Measurement & Diagnostic Tools
Oscilloscopes (CRO/DSO)
Digital Multimeters (DMM)
Clamp Meters
Power Quality Analyzers
Power Meters
Spectrum Analyzers
Data Acquisition Systems (DAQ)
Data Loggers
Power Electronics Test Equipment
Inverter Test Systems
Converter Test Platforms
UPS Testing Systems
High Voltage Test Equipment
Insulation Resistance Testers (Megger)
Hipot Test Equipment
Thermal Imaging Cameras
Summary
Imterested candidates can send their resumes to Paul at paul.dusome@randstad.ca
Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.
Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
show more
Are you anElectrical Engineer with adequate experience in electronic systems and power distribution? This 6-month role with chances of extension maybe a good fit for you.
The Electrical Engineer - Power Electronics is responsible for the design, development, testing, validation, troubleshooting, and commissioning of power electronic systems and electrical power distribution solutions. This role combines electrical engineering expertise with hands-on laboratory testing, product verification, root cause analysis, and cross-functional collaboration to ensure products meet performance, safety, quality, regulatory, and customer requirements. The engineer will support all phases of the product lifecycle, from concept development through testing, validation, deployment, and continuous improvement.
Advantages
Contract: 6 months with potential to extend
This role is focused on electrical engineering with in power electronics- must have EE degree and skills with testing tools in a lab environment.
Responsibilities
Key Responsibilities
Power Electronics Design & Development
...
Design and develop power electronic systems, converters, inverters, rectifiers, UPS systems, battery energy storage interfaces, and power distribution equipment.
Generate and review electrical schematics, wiring diagrams, one-line diagrams, and system documentation.
Perform electrical calculations, component selection, and design verification activities.
Support design optimization activities to improve reliability, efficiency, manufacturability, and product performance.
Ensure compliance with electrical codes, industry standards, and safety requirements.
Electrical Testing & Validation
Develop and execute validation plans, verification procedures, and qualification testing for power electronic systems.
Create complex test methods and test protocols to evaluate electrical performance and product reliability.
Conduct functional, environmental, electrical, thermal, and performance testing.
Design and develop test fixtures and automated test setups.
Analyze test data and prepare technical reports documenting findings and recommendations.
Verify product performance against specifications, customer requirements, and applicable standards.
Support root cause investigations and corrective action implementation for electrical failures and quality concerns.
Commissioning & Troubleshooting
Perform commissioning, startup, troubleshooting, and field support activities.
Diagnose electrical, power electronic, and control system failures.
Utilize advanced diagnostic tools to identify performance issues and optimize system operation.
Collaborate with field service, manufacturing, quality, and engineering teams to resolve complex technical issues.
Support customer acceptance testing and factory acceptance testing (FAT/SAT).
Project & Technical Leadership
Lead engineering tasks from concept through deployment.
Coordinate with multidisciplinary teams including design, software, controls, manufacturing, quality, and test engineering.
Identify technical risks and develop mitigation plans.
Participate in design reviews, technical audits, and product improvement initiatives.
Provide technical guidance to junior engineers and technicians.
Power Testing Tools & Equipment (Required Experience)
Qualifications
Minimum Qualifications
Bachelor's Degree in Electrical Engineering (BSEE) required.
Master's Degree in Electrical Engineering, Power Electronics, Energy Systems, Electronics Engineering, Mechatronics Engineering, or related engineering discipline preferred.
Professional Engineer (P.Eng.) designation or eligibility considered an asset.
3+ years of experience in power electronics, electrical design, testing, validation, or power systems engineering.
Experience working in laboratory, manufacturing, R&D, utility, industrial, renewable energy, or power distribution environments.
Candidates should possess hands-on experience with electrical laboratory testing equipment, including:
Power Sources & Loads
AC Power Sources
DC Power Supplies
Programmable Power Supplies
Electronic Loads
Variable Frequency Drives (VFDs)
Autotransformers
Battery Simulators
Measurement & Diagnostic Tools
Oscilloscopes (CRO/DSO)
Digital Multimeters (DMM)
Clamp Meters
Power Quality Analyzers
Power Meters
Spectrum Analyzers
Data Acquisition Systems (DAQ)
Data Loggers
Power Electronics Test Equipment
Inverter Test Systems
Converter Test Platforms
UPS Testing Systems
High Voltage Test Equipment
Insulation Resistance Testers (Megger)
Hipot Test Equipment
Thermal Imaging Cameras
Summary
Imterested candidates can send their resumes to Paul at paul.dusome@randstad.ca
Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.
Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
show more
