Are you looking for a SCADA Engineer E2 role and have adequate experience in the field? This contract role maybe a right fit for you.
General Description
• The E2 – Engineer performs supervised engineering tasks for assignments of limited scope and complexity using standard procedures and techniques to support projects and/or operations at BC Hydro safely, with quality, within budget, and on time.
...
Advantages
This is an opportunity to work with a renowned company at competitve pay rate.
Location: Edmonds - Hybrid
Responsibilities
• This role requires to work in design, configuration, testing and troubleshooting of SCADA systems in electrical utility substations with operating voltages from 12kV to 500kV. Demonstrated capabilities to work with utility SCADA systems, including the design, configuration, testing, and maintenance of GE RTU products (i.e. GE D400, D20, D200, D25, IBOX), Ethernet networks, DNP3 protocol, Modbus Plus® protocol, and protocol test equipment and software and other similar systems used in electrical utility substations.
• The work is focused on SCADA systems used in transmission stations with operating voltages from 12kV to 500kV.
• Prepare project documentation and deliverables in accordance with project and Engineering Design Practices (i.e. evaluation reports, specifications, proposals, estimates, design basis', calculations, hazard logs, test plans).
• Prepare design work packages including scope, duration, and level of effort estimates.
• Provide technical assistance and construction support in the field, and undertake field reviews as required by EGBC.
• Prepare detailed SCADA design packages, device point assignments, and configurations.
• Configuring/program RTUs, gateway devices, user interfaces, network switches/routers, and other IEDs related to the SCADA systems.
• Specify and procure materials, panel assemblies and other related equipment.
• Test and validate device configurations in a lab environment.
• Prepare and execute pre-commissioning test plans for SCADA systems.
• Provide technical guidance and support throughout the design process (cross-discipline integration, factory testing, installation, commissioning).
• Provide training for end-users and peers on the theory and operational use of the installed or modified equipment/systems.
Duties:
The P&C Engineering SCADA Design Team provides engineering expertise and support to high voltage transmission substations, generating stations and distribution facilities. Our team also provides project management, design, maintenance and emergency response services to the company and selected external clients. The successful candidate will be part of the SCADA (Supervisory Control And Data Acquisition) design team delivering complex, multi-discipline capital projects.
* Duties will primarily be focused on delivering capital work involving integration of remote monitoring and control equipment of the power system. Providing design, development and testing of equipment used in substations, generating stations and the distribution system
* Undertakes a variety of engineering assignments and is responsible for a project or part of a project. providing instructions, advice, and technical leadership, including reviewing work and ensuring compliance with standards and procedures; interacting with external service providers and reviewing designs for compliance with standards & practices
* Uses initiative and judgment to develop innovative engineering techniques and applies theoretical and practical knowledge in the analysis and resolution of problems. Discusses unusual problems with senior engineers or the supervisor.
* Maintain strong constructive relationships with internal and external clients and across the organization also including external service providers, contractors and suppliers as required.
* Works under general supervision, with work assigned in terms of specific objectives.
* Reviews overall plans and provides guidance for unusual features.
* Completed work is normally accepted as technically accurate and is reviewed for feasibility and soundness of judgment.
* Checks work and provides guidance to assigned staff.
Qualifications
Work Assignment Requirements
Must haves:
• University graduate in applied science or engineering
• Registered Engineer-in-Training at the of submission
*Must be able to come to office on hybrid basis.
Nice to haves:
* A minimum of 3-5 years of related work experience in automation or control systems. (The manager is looking for a senior E2).
* Experience with DNP3, networking protocols, Cyber Security and delivering M2M networking applications is desired.
* Experience with programming of GE Remote Terminal Units.
* Knowledge of NERC standards is desired”
Summary
Interested candidates can either apply directly or send their resumes to John at john.yamazaki@randstad.ca
Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.
Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
show more
Are you looking for a SCADA Engineer E2 role and have adequate experience in the field? This contract role maybe a right fit for you.
General Description
• The E2 – Engineer performs supervised engineering tasks for assignments of limited scope and complexity using standard procedures and techniques to support projects and/or operations at BC Hydro safely, with quality, within budget, and on time.
Advantages
This is an opportunity to work with a renowned company at competitve pay rate.
Location: Edmonds - Hybrid
Responsibilities
• This role requires to work in design, configuration, testing and troubleshooting of SCADA systems in electrical utility substations with operating voltages from 12kV to 500kV. Demonstrated capabilities to work with utility SCADA systems, including the design, configuration, testing, and maintenance of GE RTU products (i.e. GE D400, D20, D200, D25, IBOX), Ethernet networks, DNP3 protocol, Modbus Plus® protocol, and protocol test equipment and software and other similar systems used in electrical utility substations.
• The work is focused on SCADA systems used in transmission stations with operating voltages from 12kV to 500kV.
...
• Prepare project documentation and deliverables in accordance with project and Engineering Design Practices (i.e. evaluation reports, specifications, proposals, estimates, design basis', calculations, hazard logs, test plans).
• Prepare design work packages including scope, duration, and level of effort estimates.
• Provide technical assistance and construction support in the field, and undertake field reviews as required by EGBC.
• Prepare detailed SCADA design packages, device point assignments, and configurations.
• Configuring/program RTUs, gateway devices, user interfaces, network switches/routers, and other IEDs related to the SCADA systems.
• Specify and procure materials, panel assemblies and other related equipment.
• Test and validate device configurations in a lab environment.
• Prepare and execute pre-commissioning test plans for SCADA systems.
• Provide technical guidance and support throughout the design process (cross-discipline integration, factory testing, installation, commissioning).
• Provide training for end-users and peers on the theory and operational use of the installed or modified equipment/systems.
Duties:
The P&C Engineering SCADA Design Team provides engineering expertise and support to high voltage transmission substations, generating stations and distribution facilities. Our team also provides project management, design, maintenance and emergency response services to the company and selected external clients. The successful candidate will be part of the SCADA (Supervisory Control And Data Acquisition) design team delivering complex, multi-discipline capital projects.
* Duties will primarily be focused on delivering capital work involving integration of remote monitoring and control equipment of the power system. Providing design, development and testing of equipment used in substations, generating stations and the distribution system
* Undertakes a variety of engineering assignments and is responsible for a project or part of a project. providing instructions, advice, and technical leadership, including reviewing work and ensuring compliance with standards and procedures; interacting with external service providers and reviewing designs for compliance with standards & practices
* Uses initiative and judgment to develop innovative engineering techniques and applies theoretical and practical knowledge in the analysis and resolution of problems. Discusses unusual problems with senior engineers or the supervisor.
* Maintain strong constructive relationships with internal and external clients and across the organization also including external service providers, contractors and suppliers as required.
* Works under general supervision, with work assigned in terms of specific objectives.
* Reviews overall plans and provides guidance for unusual features.
* Completed work is normally accepted as technically accurate and is reviewed for feasibility and soundness of judgment.
* Checks work and provides guidance to assigned staff.
Qualifications
Work Assignment Requirements
Must haves:
• University graduate in applied science or engineering
• Registered Engineer-in-Training at the of submission
*Must be able to come to office on hybrid basis.
Nice to haves:
* A minimum of 3-5 years of related work experience in automation or control systems. (The manager is looking for a senior E2).
* Experience with DNP3, networking protocols, Cyber Security and delivering M2M networking applications is desired.
* Experience with programming of GE Remote Terminal Units.
* Knowledge of NERC standards is desired”
Summary
Interested candidates can either apply directly or send their resumes to John at john.yamazaki@randstad.ca
Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.
Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
show more
