Are you Engineer-E3 with adequate experience in the field? This 12-months role with chances of extension can be a good fit for you.
The E3 – Engineer is a fully qualified and accredited engineering professional who applies theoretical and practical knowledge to provide engineering design, estimating, planning, and quality management services for low to medium complexity projects and/or operations safely, with quality, within budget, and on time.
...
Advantages
Location: Edmonds, BC (Must be located in lower mainland)
Schedule: Onsite 5 days a week during training (some travel required)
This is an opportunity to work and grow with a renowned company at a competitive rate.
Responsibilities
• Develop safe engineering solutions by using initiative and judgement to perform activities such as developing designs, analyzing and resolving problems, and interpreting engineering specifications on low to medium complexity assignments for projects and/or operations.
• Assist project or operations management to meet safety, cost, quality, and time objectives by performing activities such as proposing changes in plans and estimated costs, recommending payment for work completed by contractors, preparing progress reports, coordinating work schedules and other similar tasks.
• Participate in engineering practices by conducting independent studies and analysis, exercising judgment in selecting and interpreting information, recommending safe engineering designs, and making typical decisions related to standard methods and designs so that engineering standards are maintained.
• Perform periodic tasks independently which may include on-site construction quality control and monitoring to ensure design compliance.
• Engage with the senior engineering team where engineering problems are difficult, complex, or unusual to support the management of engineering risk.
Qualifications
• A minimum four (4) years of in a relevant engineering field or equivalent.
• University graduate in applied science or engineering
• Registered Professional Engineer (P.Eng.) or Professional Geoscientist (P.Geo.) with Engineers & Geoscientists BC or with another jurisdiction and eligible for registration as such with Engineers & Geoscientists BC
• Familiarity with CAD systems and drawing standards
• Ability to use standard industry design/analysis software
• Demonstrated experience in geotechnical assessment, design, and construction activity support
• Thorough working knowledge of common industry construction practices in British Columbia.
• Thorough understanding of safety in the field / thorough understanding of environmental effects and impacts of existing conditions, construction activities, and permanent installations
• Familiar with codes and design requirements of Authorities Having Jurisdiction and the permitting process.
• Demonstrated understanding of EGBC professional practice requirements, including quality management, document control, engineering checks and reviews, records management, and retention of engineering documentation.
• Ability to serve as Professional of Record (PoR), assess field conditions and develop practical engineering solutions to support project delivery.
Nice-to-have Experience / Skills
• Experience working for a Canadian utility owner is an asset.
• Experience performing geohazard assessments is considered an asset.
• Trenchless design knowledge is considered an asset.
• Experience with geotechnical testing equipment is an asset.
• Knowledge and experience in design related to Distribution plant including U/G and O/H - may include feasibility studies, preliminary design, detailed design, field work, etc.
• Demonstrated experience in geotechnical assessment, design, and construction activity support of utility structures, including maintenance holes, vaults, duct banks, and other underground infrastructure.
• Familiar with MMCD, MoTT Utilities Manual, CoV Utilities Design Manual, etc. and design and permitting requirements of Authorities Having Jurisdiction.
• Experience with seismic and ground improvement design is an asset.
Summary
Interested candidates can send their resumes to John at john.yamazaki@randstad.ca
Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.
Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
show more
Are you Engineer-E3 with adequate experience in the field? This 12-months role with chances of extension can be a good fit for you.
The E3 – Engineer is a fully qualified and accredited engineering professional who applies theoretical and practical knowledge to provide engineering design, estimating, planning, and quality management services for low to medium complexity projects and/or operations safely, with quality, within budget, and on time.
Advantages
Location: Edmonds, BC (Must be located in lower mainland)
Schedule: Onsite 5 days a week during training (some travel required)
This is an opportunity to work and grow with a renowned company at a competitive rate.
Responsibilities
• Develop safe engineering solutions by using initiative and judgement to perform activities such as developing designs, analyzing and resolving problems, and interpreting engineering specifications on low to medium complexity assignments for projects and/or operations.
• Assist project or operations management to meet safety, cost, quality, and time objectives by performing activities such as proposing changes in plans and estimated costs, recommending payment for work completed by contractors, preparing progress reports, coordinating work schedules and other similar tasks.
...
• Participate in engineering practices by conducting independent studies and analysis, exercising judgment in selecting and interpreting information, recommending safe engineering designs, and making typical decisions related to standard methods and designs so that engineering standards are maintained.
• Perform periodic tasks independently which may include on-site construction quality control and monitoring to ensure design compliance.
• Engage with the senior engineering team where engineering problems are difficult, complex, or unusual to support the management of engineering risk.
Qualifications
• A minimum four (4) years of in a relevant engineering field or equivalent.
• University graduate in applied science or engineering
• Registered Professional Engineer (P.Eng.) or Professional Geoscientist (P.Geo.) with Engineers & Geoscientists BC or with another jurisdiction and eligible for registration as such with Engineers & Geoscientists BC
• Familiarity with CAD systems and drawing standards
• Ability to use standard industry design/analysis software
• Demonstrated experience in geotechnical assessment, design, and construction activity support
• Thorough working knowledge of common industry construction practices in British Columbia.
• Thorough understanding of safety in the field / thorough understanding of environmental effects and impacts of existing conditions, construction activities, and permanent installations
• Familiar with codes and design requirements of Authorities Having Jurisdiction and the permitting process.
• Demonstrated understanding of EGBC professional practice requirements, including quality management, document control, engineering checks and reviews, records management, and retention of engineering documentation.
• Ability to serve as Professional of Record (PoR), assess field conditions and develop practical engineering solutions to support project delivery.
Nice-to-have Experience / Skills
• Experience working for a Canadian utility owner is an asset.
• Experience performing geohazard assessments is considered an asset.
• Trenchless design knowledge is considered an asset.
• Experience with geotechnical testing equipment is an asset.
• Knowledge and experience in design related to Distribution plant including U/G and O/H - may include feasibility studies, preliminary design, detailed design, field work, etc.
• Demonstrated experience in geotechnical assessment, design, and construction activity support of utility structures, including maintenance holes, vaults, duct banks, and other underground infrastructure.
• Familiar with MMCD, MoTT Utilities Manual, CoV Utilities Design Manual, etc. and design and permitting requirements of Authorities Having Jurisdiction.
• Experience with seismic and ground improvement design is an asset.
Summary
Interested candidates can send their resumes to John at john.yamazaki@randstad.ca
Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.
Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
show more