Are you an Engineer with extensive knowledge of SCADA systems? This contract role with an opportunity for renewal may be a right fit for you.
General Description
•The E3 – Engineer is a fully qualified and accredited engineering professional who applies theoretical and practical knowledge to provide engineering design, estimating, planning, and quality management services for low to medium complexity projects and/or operations safely, with quality, within budget, and on time.
...
Role Specialty: P&C SCADA Systems Design
Advantages
Opportunity to work with a renowned company at competitive rate.
Location: Edmonds - Hybrid
Responsibilities
Experience and Role Accountabilities
• This role requires experience with the design, configuration, testing and troubleshooting of SCADA systems in electrical utility substations with operating voltages from 12kV to 500kV. Demonstrated experience working with utility SCADA systems design, including the design, configuration, testing, and maintenance of GE RTU products (i.e. GE D400, D20, D200, D25, IBOX), Ethernet networks, DNP3 protocol, Modbus Plus® protocol, and protocol test equipment and software and other similar systems used in electrical utility substations.
• The work is focused on SCADA systems used in transmission stations with operating voltages from 12kV to 500kV.
• Prepare project documentation and deliverables in accordance with company's project and Engineering Design Practices (i.e. evaluation reports, specifications, proposals, estimates, design basis', calculations, hazard logs, test plans).
• Prepare design work packages including scope, duration, and level of effort estimates.
• Prepare signed/sealed engineering deliverables as a Professional of Record (PoR) in accordance with EGBC and company's Design Practices.
• Provide technical assistance and construction support in the field, and undertake field reviews as required by EGBC.
• Prepare detailed SCADA design packages, device point assignments, and configurations.
• Configuring/program RTUs, gateway devices, user interfaces, network switches/routers, and other IEDs related to the SCADA systems.
• Specify and procure materials, panel assemblies and other related equipment.
Qualifications
Must haves:
* A minimum four (4) years of in a relevant engineering field or equivalent.
* P.ENG and P2P
* A minimum of 4-5 years of related work experience in automation or control systems and shall be eligible for immediate registration as a Professional Engineer with the Association of Professional Engineers and Geoscientists of BC.
* Experience and desire to work with utility-based Ethernet control networks, configuration and testing of remote control equipment, PLC programming, troubleshooting methodologies, and LAN/WAN technologies focused on utility solutions is required.
Nice to haves:
* Experience with DNP3, networking protocols, Cyber Security and delivering M2M networking applications is desired.
* Experience with programming of GE Remote Terminal Units.
* Knowledge of NERC standards is desired”
Summary
Location: Edmonds - Hybrid, no remote candidates
Interested candidates may submit their resumes directly to Padmavati at padmavati.surnar@randstad.ca
Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.
Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
voir plus
Are you an Engineer with extensive knowledge of SCADA systems? This contract role with an opportunity for renewal may be a right fit for you.
General Description
•The E3 – Engineer is a fully qualified and accredited engineering professional who applies theoretical and practical knowledge to provide engineering design, estimating, planning, and quality management services for low to medium complexity projects and/or operations safely, with quality, within budget, and on time.
Role Specialty: P&C SCADA Systems Design
Advantages
Opportunity to work with a renowned company at competitive rate.
Location: Edmonds - Hybrid
Responsibilities
Experience and Role Accountabilities
• This role requires experience with the design, configuration, testing and troubleshooting of SCADA systems in electrical utility substations with operating voltages from 12kV to 500kV. Demonstrated experience working with utility SCADA systems design, including the design, configuration, testing, and maintenance of GE RTU products (i.e. GE D400, D20, D200, D25, IBOX), Ethernet networks, DNP3 protocol, Modbus Plus® protocol, and protocol test equipment and software and other similar systems used in electrical utility substations.
...
• The work is focused on SCADA systems used in transmission stations with operating voltages from 12kV to 500kV.
• Prepare project documentation and deliverables in accordance with company's project and Engineering Design Practices (i.e. evaluation reports, specifications, proposals, estimates, design basis', calculations, hazard logs, test plans).
• Prepare design work packages including scope, duration, and level of effort estimates.
• Prepare signed/sealed engineering deliverables as a Professional of Record (PoR) in accordance with EGBC and company's Design Practices.
• Provide technical assistance and construction support in the field, and undertake field reviews as required by EGBC.
• Prepare detailed SCADA design packages, device point assignments, and configurations.
• Configuring/program RTUs, gateway devices, user interfaces, network switches/routers, and other IEDs related to the SCADA systems.
• Specify and procure materials, panel assemblies and other related equipment.
Qualifications
Must haves:
* A minimum four (4) years of in a relevant engineering field or equivalent.
* P.ENG and P2P
* A minimum of 4-5 years of related work experience in automation or control systems and shall be eligible for immediate registration as a Professional Engineer with the Association of Professional Engineers and Geoscientists of BC.
* Experience and desire to work with utility-based Ethernet control networks, configuration and testing of remote control equipment, PLC programming, troubleshooting methodologies, and LAN/WAN technologies focused on utility solutions is required.
Nice to haves:
* Experience with DNP3, networking protocols, Cyber Security and delivering M2M networking applications is desired.
* Experience with programming of GE Remote Terminal Units.
* Knowledge of NERC standards is desired”
Summary
Location: Edmonds - Hybrid, no remote candidates
Interested candidates may submit their resumes directly to Padmavati at padmavati.surnar@randstad.ca
Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.
Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
voir plus
