Our client is looking for an experienced engineer for their 12-months contract role.
General Description
• The E4 – Engineer is a professional engineer or geoscientist who applies engineering knowledge to provide engineering, estimating, planning, and quality management services for medium complexity projects and/or operations safely, with quality, within budget, and on time.
...
Advantages
NOTE: The mentioned rates are NOT INC rates. The INC rate range is $85-$95/hr
Responsibilities
Experience and Role Accountabilities
• A minimum eight (8) years of experience in a relevant engineering field or equivalent.
• Develop safe engineering solutions by using initiative and judgement to perform tasks including developing designs, analyzing and resolving problems, and interpreting engineering specifications on medium complexity and scope assignments for company projects and operations.
• Assist project or operations management to meet safety, cost, quality, and time objectives by proposing changes in plans and estimated costs, recommending payment for work completed by contractors, preparing progress reports, coordinating work schedules and other similar tasks.
• Resolve highly technical and unusual design and field engineering problems by conducting independent studies and analysis, exercising independent judgment in selecting and interpreting information, recommending safe engineering designs to support successful operations and/or project completion at company.
• Participate in company’s engineering practice by conducting independent studies and analysis, contributing to the development of technical standards, exercising judgment in selecting and interpreting information, recommending safe engineering designs, and making decisions related to methods and designs as well as providing guidance and advice to other engineering professionals to develop future capability at company.
Important notes:
• Prior to commencement on assignment, the selected candidate must have their own sole practitioner, or the use of their firm’s, Permit to Practice with EGBC.
• EGBC Registrants provided to company through this assignment shall work under company’s Professional Practice Management Plan, Quality Management Pillar. The Registrant shall apply their own or their firm’s Permit to Practice Number to work that is Sealed by the Registrant. Retention and preservation of all project documentation produced by the Registrant during their contract with company will be retained by company to satisfy EGBC Bylaws.
Role Specialty: Distribution - Electrical
Role Specialty Description:
Additional Experience and Role Accountabilities
• All the required Experience and Role Accountabilities shall relate to Overhead - and underground electric utility distribution systems operating at voltages at or below 35kV.
• Support operations, maintenance, repair, replacement and expansion of the company Distribution System.
• Investigate, analyze and solve a variety of engineering problems, including the more challenging and unusual, by developing engineering techniques, devising new approaches and/or applying existing criteria in new ways
• Provide technical guidance, instruction, and assistance related to the operation, maintenance, troubleshooting and modifications of equipment
Work Assignment Requirements:
Supporting the Distribution Engineering Programs team in providing engineering support of new, end-of-life, and automation programs
Act as company’s Owner’s Engineer (OE) and review Engineering Service Provides (ESP) design submissions
Apply company standards and design instructions
Work with Distribution Regional Engineers (DRE) and ESP in providing non-standard solutions
Reviewing and designing device settings in collaboration with DRE
Supporting and ensuring the successful implementation and commissioning of distribution equipment
Work Assignment Requirements:
Knowledge of distribution equipment up to 25kV
Knowledge of Protection and Controls (P&C) for device settings
Knowledge on how to perform load and short circuit studies
Knowledge of company standards would be an asset
Good written and oral communication skills are essential
Qualifications
Education and Skills
Registered Professional Engineer (P.Eng.) or Professional Geoscientist (P.Geo.) with Engineers & Geoscientists BC or with another jurisdiction and eligible for registration as such with Engineers & Geoscientists BC
• Company uses a Digital Sign and Seal Technology. You may be required to subscribe to a digital seal technology service offered by Notarius
•Intermediate English skills for professional environment, written and spoken
•Familiarity with CAD systems and drawing standards
•Ability to use standard industry design/analysis software
•Intermediate MS Office skills (Word, Excel, and PowerPoint)
Additional Education and Skills
• Degree in Electrical Engineering recognized by universities in Canada, Power Engineering preferred
• Demonstrated experience and technical knowledge in both Overhead - and underground electric utility distribution systems operating at voltages at or below 35kV including automation
• Broad range of distribution related skills including planning, system engineering, protection engineering, design, and project management
• Demonstrated ability to perform system analysis
• Knowledge of various company systems, policies and procedures, preferred
• Willingness to travel
• Maintain good standing in Engineers & Geoscientists British Columbia (EGBC) throughout the term of the contract
• Maintain Driver's License Class 5 throughout the term of the contract
Summary
Interested candidates can send their resumes directly to Chandana at chandana.sriram@randstad.ca
Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.
Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
show more
Our client is looking for an experienced engineer for their 12-months contract role.
General Description
• The E4 – Engineer is a professional engineer or geoscientist who applies engineering knowledge to provide engineering, estimating, planning, and quality management services for medium complexity projects and/or operations safely, with quality, within budget, and on time.
Advantages
NOTE: The mentioned rates are NOT INC rates. The INC rate range is $85-$95/hr
Responsibilities
Experience and Role Accountabilities
• A minimum eight (8) years of experience in a relevant engineering field or equivalent.
• Develop safe engineering solutions by using initiative and judgement to perform tasks including developing designs, analyzing and resolving problems, and interpreting engineering specifications on medium complexity and scope assignments for company projects and operations.
• Assist project or operations management to meet safety, cost, quality, and time objectives by proposing changes in plans and estimated costs, recommending payment for work completed by contractors, preparing progress reports, coordinating work schedules and other similar tasks.
...
• Resolve highly technical and unusual design and field engineering problems by conducting independent studies and analysis, exercising independent judgment in selecting and interpreting information, recommending safe engineering designs to support successful operations and/or project completion at company.
• Participate in company’s engineering practice by conducting independent studies and analysis, contributing to the development of technical standards, exercising judgment in selecting and interpreting information, recommending safe engineering designs, and making decisions related to methods and designs as well as providing guidance and advice to other engineering professionals to develop future capability at company.
Important notes:
• Prior to commencement on assignment, the selected candidate must have their own sole practitioner, or the use of their firm’s, Permit to Practice with EGBC.
• EGBC Registrants provided to company through this assignment shall work under company’s Professional Practice Management Plan, Quality Management Pillar. The Registrant shall apply their own or their firm’s Permit to Practice Number to work that is Sealed by the Registrant. Retention and preservation of all project documentation produced by the Registrant during their contract with company will be retained by company to satisfy EGBC Bylaws.
Role Specialty: Distribution - Electrical
Role Specialty Description:
Additional Experience and Role Accountabilities
• All the required Experience and Role Accountabilities shall relate to Overhead - and underground electric utility distribution systems operating at voltages at or below 35kV.
• Support operations, maintenance, repair, replacement and expansion of the company Distribution System.
• Investigate, analyze and solve a variety of engineering problems, including the more challenging and unusual, by developing engineering techniques, devising new approaches and/or applying existing criteria in new ways
• Provide technical guidance, instruction, and assistance related to the operation, maintenance, troubleshooting and modifications of equipment
Work Assignment Requirements:
Supporting the Distribution Engineering Programs team in providing engineering support of new, end-of-life, and automation programs
Act as company’s Owner’s Engineer (OE) and review Engineering Service Provides (ESP) design submissions
Apply company standards and design instructions
Work with Distribution Regional Engineers (DRE) and ESP in providing non-standard solutions
Reviewing and designing device settings in collaboration with DRE
Supporting and ensuring the successful implementation and commissioning of distribution equipment
Work Assignment Requirements:
Knowledge of distribution equipment up to 25kV
Knowledge of Protection and Controls (P&C) for device settings
Knowledge on how to perform load and short circuit studies
Knowledge of company standards would be an asset
Good written and oral communication skills are essential
Qualifications
Education and Skills
Registered Professional Engineer (P.Eng.) or Professional Geoscientist (P.Geo.) with Engineers & Geoscientists BC or with another jurisdiction and eligible for registration as such with Engineers & Geoscientists BC
• Company uses a Digital Sign and Seal Technology. You may be required to subscribe to a digital seal technology service offered by Notarius
•Intermediate English skills for professional environment, written and spoken
•Familiarity with CAD systems and drawing standards
•Ability to use standard industry design/analysis software
•Intermediate MS Office skills (Word, Excel, and PowerPoint)
Additional Education and Skills
• Degree in Electrical Engineering recognized by universities in Canada, Power Engineering preferred
• Demonstrated experience and technical knowledge in both Overhead - and underground electric utility distribution systems operating at voltages at or below 35kV including automation
• Broad range of distribution related skills including planning, system engineering, protection engineering, design, and project management
• Demonstrated ability to perform system analysis
• Knowledge of various company systems, policies and procedures, preferred
• Willingness to travel
• Maintain good standing in Engineers & Geoscientists British Columbia (EGBC) throughout the term of the contract
• Maintain Driver's License Class 5 throughout the term of the contract
Summary
Interested candidates can send their resumes directly to Chandana at chandana.sriram@randstad.ca
Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.
Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
show more
