Thank you for subscribing to your personalised job alerts.

    16 jobs found for Automation

    filter2
    clear all
      • North York, Ontario
      • Permanent
      Randstad Engineering is currently recruiting for a Senior Mechanical Engineering Automation Design role with experience within the industrial automation field. Experience with Solid Works is a MUST have for this role. This is for a Global and one of the largest Electronics manufacturing companies in Toronto.Do you have 7+ years of experience with mechanical and automation design?Do you have experience working for an automation integrator?Have you designed stand-alone automation cells or medium size to large automation lines? Have you led projects from start to finish? If you have experience in all of the above, then this is the right opportunity for you in Toronto. Please send me your resume at rahul.dhawan@randstad.caAdvantagesThis is a Full-time permanent opportunity with our clients along with a complete Bonus, benefits and a competitive salary package.Responsibilities- Concept and architect automation stations and assembly lines- Analysis of inputs and User Requirements in order to determine the feasibility of using one or more machines to carry out sequential operations in known process time- Must be capable of designing tooling from sketches or verbal concepts- Perform engineering calculations with respect to cycle time, the strength of materials, speeds, horsepower, temperature, pressure, force, etc. as related to machine and tool designs- Analyze engineering drawings and specifications to determine requirements in the development of equipment to meet process and products specifications- Produce working drawings, models and bills of materials for equipment, or sub-assemblies- Analyze designs and systems for compliance to applicable standards (i.e. CE or customer-specific)- Must be proficient in AutoCAD and SolidWorks- An understanding of the use of pneumatics and hydraulics- An understanding of the use of electrical devices (i.e. switches, load cells, LVDT’s etc.)- An understanding of machine vision as it applied to automation stations for identification, quality, robotic offset and alignmentQualificationsTravel requirements:The expectation of travel to vendor/supplier locations is less than 20% of the time, however, may be exceeded in exceptional circumstances to meet project needsEducation: University Degree or College Diploma in Mechanical Engineering / Robotics Automation TechnologyExperience: Minimum 7 years in automation design at a machine integrator, or equivalent, designing and concepting machines from small tabletop to large stationsSummaryIf you are interested in this opportunity, please send your resume directly to Rahul Dhawan at rahul.dhawan@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Randstad Engineering is currently recruiting for a Senior Mechanical Engineering Automation Design role with experience within the industrial automation field. Experience with Solid Works is a MUST have for this role. This is for a Global and one of the largest Electronics manufacturing companies in Toronto.Do you have 7+ years of experience with mechanical and automation design?Do you have experience working for an automation integrator?Have you designed stand-alone automation cells or medium size to large automation lines? Have you led projects from start to finish? If you have experience in all of the above, then this is the right opportunity for you in Toronto. Please send me your resume at rahul.dhawan@randstad.caAdvantagesThis is a Full-time permanent opportunity with our clients along with a complete Bonus, benefits and a competitive salary package.Responsibilities- Concept and architect automation stations and assembly lines- Analysis of inputs and User Requirements in order to determine the feasibility of using one or more machines to carry out sequential operations in known process time- Must be capable of designing tooling from sketches or verbal concepts- Perform engineering calculations with respect to cycle time, the strength of materials, speeds, horsepower, temperature, pressure, force, etc. as related to machine and tool designs- Analyze engineering drawings and specifications to determine requirements in the development of equipment to meet process and products specifications- Produce working drawings, models and bills of materials for equipment, or sub-assemblies- Analyze designs and systems for compliance to applicable standards (i.e. CE or customer-specific)- Must be proficient in AutoCAD and SolidWorks- An understanding of the use of pneumatics and hydraulics- An understanding of the use of electrical devices (i.e. switches, load cells, LVDT’s etc.)- An understanding of machine vision as it applied to automation stations for identification, quality, robotic offset and alignmentQualificationsTravel requirements:The expectation of travel to vendor/supplier locations is less than 20% of the time, however, may be exceeded in exceptional circumstances to meet project needsEducation: University Degree or College Diploma in Mechanical Engineering / Robotics Automation TechnologyExperience: Minimum 7 years in automation design at a machine integrator, or equivalent, designing and concepting machines from small tabletop to large stationsSummaryIf you are interested in this opportunity, please send your resume directly to Rahul Dhawan at rahul.dhawan@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Permanent
      Randstad Engineering is currently recruiting for a Senior Automation Engineer role with experience within the industrial automation field. Experience with AutoCAD & Solid Works is a MUST have for this role. This is for a Global and one of the largest Electronics manufacturing companies in Toronto.Do you have 7+ years of experience do you have with warehouse and material handling automation?Have you completed a warehouse automation project that you have concepted from start to finish worth $1M to $5M?Do you have knowledge of engineering principles and tolerances?Have you led projects from start to finish?If you have experience in all of the above, then this is the right opportunity for you in Toronto. Please send me your resume at rahul.dhawan@randstad.caAdvantagesThis is a Full-time permanent opportunity with our clients along with a complete Bonus, benefits and a competitive salary package.Responsibilities- Concept and architect automated warehouse systems and standards that support these systems  - Analysis of inputs and User Requirements in order to determine feasibility of systems that meet specifications  - Must be capable of designing systems from sketches or verbal concepts  - Perform engineering calculations with respect to cycle time, loads, standard packaging types  - Analyze engineering drawings and specifications to determine requirements in the development of equipment to meet specifications  - Produce working drawings, models and bills of materials for equipment, or sub-assemblies  - Work with large global logistics integrators to optimize systems from technical information and specifications  - Analyze designs and systems for compliance to applicable standards (i.e. CE or customer-specific)  - Make recommendations for warehouse systems based on available input and analysis - Review drawings for accuracy, material selection, proper machining techniques, finishes, hardness, etc.  - Communicate all requested design changes to various teams  - Responsible for communicating progress on tasksQualificationsEducation:  University Degree or College Diploma in Mechanical Engineering / Robotics Automation Technology Experience:  Minimum 10 years in automation design of logistics and warehouse automation systems concepting large [$1-5+M] projectsTravel Requirements:  Expectation of travel to vendor/supplier locations is less than 20% of time, however may be exceeded in exceptional circumstances to meet project needsSummaryIf you are interested in this opportunity, please send your resume directly to Rahul Dhawan at rahul.dhawan@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Randstad Engineering is currently recruiting for a Senior Automation Engineer role with experience within the industrial automation field. Experience with AutoCAD & Solid Works is a MUST have for this role. This is for a Global and one of the largest Electronics manufacturing companies in Toronto.Do you have 7+ years of experience do you have with warehouse and material handling automation?Have you completed a warehouse automation project that you have concepted from start to finish worth $1M to $5M?Do you have knowledge of engineering principles and tolerances?Have you led projects from start to finish?If you have experience in all of the above, then this is the right opportunity for you in Toronto. Please send me your resume at rahul.dhawan@randstad.caAdvantagesThis is a Full-time permanent opportunity with our clients along with a complete Bonus, benefits and a competitive salary package.Responsibilities- Concept and architect automated warehouse systems and standards that support these systems  - Analysis of inputs and User Requirements in order to determine feasibility of systems that meet specifications  - Must be capable of designing systems from sketches or verbal concepts  - Perform engineering calculations with respect to cycle time, loads, standard packaging types  - Analyze engineering drawings and specifications to determine requirements in the development of equipment to meet specifications  - Produce working drawings, models and bills of materials for equipment, or sub-assemblies  - Work with large global logistics integrators to optimize systems from technical information and specifications  - Analyze designs and systems for compliance to applicable standards (i.e. CE or customer-specific)  - Make recommendations for warehouse systems based on available input and analysis - Review drawings for accuracy, material selection, proper machining techniques, finishes, hardness, etc.  - Communicate all requested design changes to various teams  - Responsible for communicating progress on tasksQualificationsEducation:  University Degree or College Diploma in Mechanical Engineering / Robotics Automation Technology Experience:  Minimum 10 years in automation design of logistics and warehouse automation systems concepting large [$1-5+M] projectsTravel Requirements:  Expectation of travel to vendor/supplier locations is less than 20% of time, however may be exceeded in exceptional circumstances to meet project needsSummaryIf you are interested in this opportunity, please send your resume directly to Rahul Dhawan at rahul.dhawan@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Niagara Falls
      • Permanent
      Your challenge!Reporting to the Maintenance Manager, you will support the plant on a day-to-day by acting as a Subject Matter Expert and Project Manager for the design and implementation of EAI projects with 24/7 Heavy industrial worksite. To be successful in this position, you require strong knowledge in High voltage, possess DC experience and be an excellent team player.  Your Responsibilities    Projects overseeing include both capital improvements and mill modifications.    Project scopes and design, bid specifications, cost estimates,  material procurement, drawing review, project inspection and processing of job completion requirements for electrical and automation related projects    Participate in the development of process flow diagrams, piping and instrumentation diagrams (P&ID’s), electrical and automation drawings.    Design, support, and evaluate automation and control systems to ensure efficient and safe facility operations.     Participate in start-up and commissioning of Mill EAI Capital and modification as well as resolution of open issues    Provide direct support and guidance for programmable logic controllers (PLC), distributed process control systems (DCS), human machine interfaces (HMI), Historian data logging and reporting, and associated instrumentation Your Background and Strengths    Bachelor's degree in Electrical Engineering    Minimum of 5 years’ experience working in a manufacturing role.     Expertise of 480, 2300, 4160 and 12kV power distribution and protective relaying;    Practical knowledge in troubleshooting AC and DC motors, drives and starters;    Experience in a heavy 24/7 industrial manufacturing setting is a definite asset.     Must be proficient in Microsoft Office, and computer aided design applications    Experience with SAP as ERP system is considered an assetIND3#revealyourpotential #LifeAtCascadesCascades believes in the success of an inclusive organization that values diversity within its team. All qualified candidates will be considered for this position in a fair manner. Use of the masculine in our communications refers equally to both women and men.About CascadesTo be part of Cascades is to reveal the full potential of materials, people and ideas. We are source of possibilities.Since 1964, we have been providing sustainable, innovative and value-creating solutions in packaging, hygiene and recovery.Join 12,000 women and men working in a network of more than 90 operating units located in North America and Europe.  
      Your challenge!Reporting to the Maintenance Manager, you will support the plant on a day-to-day by acting as a Subject Matter Expert and Project Manager for the design and implementation of EAI projects with 24/7 Heavy industrial worksite. To be successful in this position, you require strong knowledge in High voltage, possess DC experience and be an excellent team player.  Your Responsibilities    Projects overseeing include both capital improvements and mill modifications.    Project scopes and design, bid specifications, cost estimates,  material procurement, drawing review, project inspection and processing of job completion requirements for electrical and automation related projects    Participate in the development of process flow diagrams, piping and instrumentation diagrams (P&ID’s), electrical and automation drawings.    Design, support, and evaluate automation and control systems to ensure efficient and safe facility operations.     Participate in start-up and commissioning of Mill EAI Capital and modification as well as resolution of open issues    Provide direct support and guidance for programmable logic controllers (PLC), distributed process control systems (DCS), human machine interfaces (HMI), Historian data logging and reporting, and associated instrumentation Your Background and Strengths    Bachelor's degree in Electrical Engineering    Minimum of 5 years’ experience working in a manufacturing role.     Expertise of 480, 2300, 4160 and 12kV power distribution and protective relaying;    Practical knowledge in troubleshooting AC and DC motors, drives and starters;    Experience in a heavy 24/7 industrial manufacturing setting is a definite asset.     Must be proficient in Microsoft Office, and computer aided design applications    Experience with SAP as ERP system is considered an assetIND3#revealyourpotential #LifeAtCascadesCascades believes in the success of an inclusive organization that values diversity within its team. All qualified candidates will be considered for this position in a fair manner. Use of the masculine in our communications refers equally to both women and men.About CascadesTo be part of Cascades is to reveal the full potential of materials, people and ideas. We are source of possibilities.Since 1964, we have been providing sustainable, innovative and value-creating solutions in packaging, hygiene and recovery.Join 12,000 women and men working in a network of more than 90 operating units located in North America and Europe.  
      • Vancouver, British Columbia
      • Permanent
      We are seeking an experienced, intermediate to senior Electrical Drafter for a well established client of ours in the Vancouver area. The Electrical drafter would be a key contributor in the design of automation and electrical systems . Our client has experienced significant growth over the past couple years and is looking to add to their engineering and design team. Advantages• Excellent compensation and benefits• Flexible work environment• Opportunities for career growthResponsibilitiesAutomation and Electrical Systems Design:• Provide CAD drawings for automation systems, including panel elevations, layouts and electrical schematics for VFD’s, MCC’s and PLC’s.• Support the development of drafting policies and plans for continuous improvement of the Drafting Department.• Work with the engineering team to ensure consistent drawings while providing the technical content and layouts they require.• Prioritize and manage drafting work on concurrent projects.• Manage and maintain drawing standards, including symbols, nomenclature, as required.• Maintain a record of drawing revisions and transmittals.Other:• Provide technical guidance and mentoring to the junior drafters.• Collaborate with the Engineering team to create and maintaining engineering standards.• Support automation systems testing during the manufacturing phase.• Promote corporate core values of Teamwork, Quality, Safety, Customer Service,Integrity and Open, Respectful Communication.Qualifications• 5 years + experience in drafting, ideally with electrical focus (i.e. one-line diagrams, wiring diagrams, schematics, loop drawings, etc.)• Able to prepare complex electrical schematics from rough sketches and/or verbal instructions from the engineering team.• Strong working knowledge of Word and Excel.• Strong organizational, communication and time management skills.• Motivated to continuously improve technical skills, personal skills and companySummaryIf you would like to be considered for this opportunity please forward your resume via email to Nick Paraskeva | nick.paraskeva@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      We are seeking an experienced, intermediate to senior Electrical Drafter for a well established client of ours in the Vancouver area. The Electrical drafter would be a key contributor in the design of automation and electrical systems . Our client has experienced significant growth over the past couple years and is looking to add to their engineering and design team. Advantages• Excellent compensation and benefits• Flexible work environment• Opportunities for career growthResponsibilitiesAutomation and Electrical Systems Design:• Provide CAD drawings for automation systems, including panel elevations, layouts and electrical schematics for VFD’s, MCC’s and PLC’s.• Support the development of drafting policies and plans for continuous improvement of the Drafting Department.• Work with the engineering team to ensure consistent drawings while providing the technical content and layouts they require.• Prioritize and manage drafting work on concurrent projects.• Manage and maintain drawing standards, including symbols, nomenclature, as required.• Maintain a record of drawing revisions and transmittals.Other:• Provide technical guidance and mentoring to the junior drafters.• Collaborate with the Engineering team to create and maintaining engineering standards.• Support automation systems testing during the manufacturing phase.• Promote corporate core values of Teamwork, Quality, Safety, Customer Service,Integrity and Open, Respectful Communication.Qualifications• 5 years + experience in drafting, ideally with electrical focus (i.e. one-line diagrams, wiring diagrams, schematics, loop drawings, etc.)• Able to prepare complex electrical schematics from rough sketches and/or verbal instructions from the engineering team.• Strong working knowledge of Word and Excel.• Strong organizational, communication and time management skills.• Motivated to continuously improve technical skills, personal skills and companySummaryIf you would like to be considered for this opportunity please forward your resume via email to Nick Paraskeva | nick.paraskeva@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Stratford, Ontario
      • Permanent
      Are you a skilled automation specialist?Do you enjoy working with robotic welding?Are you looking to join a dynamic organization?If so, this could be the opportunity for you!The Automation Specialist is responsible for working with Fanuc and ABB robots. The AutomationSpecialist will generate efficient layouts for robots to secure parts using Modular fixtures, program therobots, and ensure the robots run efficiently. They are accountable to produce parts to establishedrequirements, working in accordance with ISO procedures.Duties listed may change as the Company evolves. Performing other duties as assigned is a requirementfor this position.AdvantagesCompetitive compensation packageGreat environmentGood safety recordDynamic company viewed as a great place to workPaid overtime after 40 hoursResponsibilitiesResponsibilities and Duties Accurately create offline programs quickly and efficiently Maintain and troubleshoot existing programs Ensure high standards or workmanship Ensure outputs meet production schedules, safety and quality standards, as well as customer needs Always ensure proper use of required personal protective equipment Collect and process information from drawings, Customers, the Production Team and Managementto develop and program new robotic welding processes. Ensure compliance with company policies and standards for cost control, waste reduction, quality,safety, and complete and on time delivery Configure, program and fine tune robots once simulation is loaded Meet requirements as listed on the applicable Competency Document.QualificationsQualifications Technologist diploma in Programming Degree or diploma in Manufacturing, Engineering, CAD, CAM, AutoCAD, inventory, SolidWorks,SolidEdge or similar drafting software Experience with manual Gas Metal Arc Welding Technical understanding of welding processes and weld quality standards to ensure that weldquality is being upheld to customer requirements Ability to program PLC’S and HMI’s Solid comprehension of technical drawingsSummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you a skilled automation specialist?Do you enjoy working with robotic welding?Are you looking to join a dynamic organization?If so, this could be the opportunity for you!The Automation Specialist is responsible for working with Fanuc and ABB robots. The AutomationSpecialist will generate efficient layouts for robots to secure parts using Modular fixtures, program therobots, and ensure the robots run efficiently. They are accountable to produce parts to establishedrequirements, working in accordance with ISO procedures.Duties listed may change as the Company evolves. Performing other duties as assigned is a requirementfor this position.AdvantagesCompetitive compensation packageGreat environmentGood safety recordDynamic company viewed as a great place to workPaid overtime after 40 hoursResponsibilitiesResponsibilities and Duties Accurately create offline programs quickly and efficiently Maintain and troubleshoot existing programs Ensure high standards or workmanship Ensure outputs meet production schedules, safety and quality standards, as well as customer needs Always ensure proper use of required personal protective equipment Collect and process information from drawings, Customers, the Production Team and Managementto develop and program new robotic welding processes. Ensure compliance with company policies and standards for cost control, waste reduction, quality,safety, and complete and on time delivery Configure, program and fine tune robots once simulation is loaded Meet requirements as listed on the applicable Competency Document.QualificationsQualifications Technologist diploma in Programming Degree or diploma in Manufacturing, Engineering, CAD, CAM, AutoCAD, inventory, SolidWorks,SolidEdge or similar drafting software Experience with manual Gas Metal Arc Welding Technical understanding of welding processes and weld quality standards to ensure that weldquality is being upheld to customer requirements Ability to program PLC’S and HMI’s Solid comprehension of technical drawingsSummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Ashland
      • Permanent
      Your challenge!The Bear Island Mill is the newest addition to the Cascades Containerboard Packaging lineup. This state-of-the-art facility will offer one of the lightest high end, 100% recycled linerboard and medium products on the market. The mill is actually under construction and start-up is scheduled in December 2022. Prior to start up you will work closely with our paper machine drives and VFD suppliers and work with the team on assigned projects. We’re looking for candidates who are interested in taking their automation skills to the next level. The ideal candidate’s experience in maintenance processes and preventative maintenance will help to ensure the continuous implementation of world class maintenance practices. Job ResponsibilitiesResponsible for the production line’s troubleshooting in paper machine drive system and VFD. Perform as the key contact for production line availability and keeps updated on the appropriate SAP system statuses and production reports.Observes the machine on the field.  In the event of a malfunction or abnormality in the machine, the engineer will perform corrective actions or creates notifications/work orders for shut down planning. Meets regularly with operators to collect comments or observations and works closely in cooperation with the production coordinators to ensure production and machine availability.Performs configuration changes in cooperation with production and reports what has been done. Responsible for his or her area’s needed spare parts purchase requests. Experience and EducationMinimum of a 2-year degree in Electrical Engineering, Automation or related field, or commensurate experience in an industrial automation environmentExperience with ABB drives and Rockwell VFDExperience in pulp and paperRigour and agility to handle projects based on their scope, budget and timelinesStrong organizational skills and ability to set prioritiesKeen sense of collaboration to communicate effectively with stakeholders from various levels of the organizationLeadership and expertise in promoting buy-in to proposed solutionsAbility to translate challenges into concrete solutionsAbility to support and advise business partners in analyzing their needs and finding solutionsStrong sense of responsibilityKnowledge of continuous improvement concepts and the ability to integrate them into your managementAgility needed to work with various technological toolsKnowledge of SAP software or other ERP (an asset)Core competencies defined for this jobPlanning and organizingAdvisory roleAccountabilityRigourAutonomyContinuous improvementAdditional Information#revealyourpotential #LifeAtCascadesCascades believes in the success of an inclusive organization that values diversity within its team. All qualified candidates will be considered for this position in a fair manner.  About CascadesTo be part of Cascades is to reveal the full potential of materials, people and ideas. We are source of possibilities.Since 1964, we have been providing sustainable, innovative and value-creating solutions in packaging, hygiene and recovery.Join 12,000 women and men working in a network of more than 90 operating units located in North America and Europe. 
      Your challenge!The Bear Island Mill is the newest addition to the Cascades Containerboard Packaging lineup. This state-of-the-art facility will offer one of the lightest high end, 100% recycled linerboard and medium products on the market. The mill is actually under construction and start-up is scheduled in December 2022. Prior to start up you will work closely with our paper machine drives and VFD suppliers and work with the team on assigned projects. We’re looking for candidates who are interested in taking their automation skills to the next level. The ideal candidate’s experience in maintenance processes and preventative maintenance will help to ensure the continuous implementation of world class maintenance practices. Job ResponsibilitiesResponsible for the production line’s troubleshooting in paper machine drive system and VFD. Perform as the key contact for production line availability and keeps updated on the appropriate SAP system statuses and production reports.Observes the machine on the field.  In the event of a malfunction or abnormality in the machine, the engineer will perform corrective actions or creates notifications/work orders for shut down planning. Meets regularly with operators to collect comments or observations and works closely in cooperation with the production coordinators to ensure production and machine availability.Performs configuration changes in cooperation with production and reports what has been done. Responsible for his or her area’s needed spare parts purchase requests. Experience and EducationMinimum of a 2-year degree in Electrical Engineering, Automation or related field, or commensurate experience in an industrial automation environmentExperience with ABB drives and Rockwell VFDExperience in pulp and paperRigour and agility to handle projects based on their scope, budget and timelinesStrong organizational skills and ability to set prioritiesKeen sense of collaboration to communicate effectively with stakeholders from various levels of the organizationLeadership and expertise in promoting buy-in to proposed solutionsAbility to translate challenges into concrete solutionsAbility to support and advise business partners in analyzing their needs and finding solutionsStrong sense of responsibilityKnowledge of continuous improvement concepts and the ability to integrate them into your managementAgility needed to work with various technological toolsKnowledge of SAP software or other ERP (an asset)Core competencies defined for this jobPlanning and organizingAdvisory roleAccountabilityRigourAutonomyContinuous improvementAdditional Information#revealyourpotential #LifeAtCascadesCascades believes in the success of an inclusive organization that values diversity within its team. All qualified candidates will be considered for this position in a fair manner.  About CascadesTo be part of Cascades is to reveal the full potential of materials, people and ideas. We are source of possibilities.Since 1964, we have been providing sustainable, innovative and value-creating solutions in packaging, hygiene and recovery.Join 12,000 women and men working in a network of more than 90 operating units located in North America and Europe. 
      • Ottawa, Ontario
      • Contract
      Under the supervision of the Manager of Technical Projects & Support; the Mechanical Engineer provides engineeringknowledge to support manufacturing of the existing as well as new products in development.The various manufacturing processes include automated machines incorporating robotics and complex material handling.The engineer will source or design new equipment, systems and components, as well as make updates or improvementsto current equipment. The engineer will prepare documentation packages related to manufacturing equipment such asoperating and maintenance procedures as well as contribute to verification and validation studies, protocols andreports. The engineer will be engaged in supporting and troubleshooting the manufacturing equipment to minimizeproduction interruption and ensure production and quality targets are met. An ideal candidate would be a professional who possesses a breadth of knowledge to be able to work and contribute to different aspects of manufacturing.Advantages6 months contract with potential to be hired perm or further extensionGlobal Brandlots of room for advancementResponsibilitiesDuties and Responsibilities• mechanical engineering support of existing tools and equipment• mechanical design of improvements or new stations and equipment• understand and improve manufacturing processes• develop upgrades to existing automation and roboticQualifications• Bachelors degree or higher in engineering (mechanical preferred)• Experience in working with automation or manufacturing equipment• Preferred knowledge of PLC programming and communications• Ability to perform tolerance and/or measurement analysis• Ability to troubleshoot mechanical as well as electromechanical issues• Excellent oral and written English communication skills• 3-5 years of engineering within manufacturing experience preferredSummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.ca Thank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Under the supervision of the Manager of Technical Projects & Support; the Mechanical Engineer provides engineeringknowledge to support manufacturing of the existing as well as new products in development.The various manufacturing processes include automated machines incorporating robotics and complex material handling.The engineer will source or design new equipment, systems and components, as well as make updates or improvementsto current equipment. The engineer will prepare documentation packages related to manufacturing equipment such asoperating and maintenance procedures as well as contribute to verification and validation studies, protocols andreports. The engineer will be engaged in supporting and troubleshooting the manufacturing equipment to minimizeproduction interruption and ensure production and quality targets are met. An ideal candidate would be a professional who possesses a breadth of knowledge to be able to work and contribute to different aspects of manufacturing.Advantages6 months contract with potential to be hired perm or further extensionGlobal Brandlots of room for advancementResponsibilitiesDuties and Responsibilities• mechanical engineering support of existing tools and equipment• mechanical design of improvements or new stations and equipment• understand and improve manufacturing processes• develop upgrades to existing automation and roboticQualifications• Bachelors degree or higher in engineering (mechanical preferred)• Experience in working with automation or manufacturing equipment• Preferred knowledge of PLC programming and communications• Ability to perform tolerance and/or measurement analysis• Ability to troubleshoot mechanical as well as electromechanical issues• Excellent oral and written English communication skills• 3-5 years of engineering within manufacturing experience preferredSummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.ca Thank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Toronto, Ontario
      • Contract
      Are you a Senior Electrical Engineer with Mining project Experience?Are you looking for an opportunity with a dynamic organization that is growing?If so, this could be the role for you!Work will involve:• Leading an Electrical group in a growing Consulting Engineering environment• Electrical MV and LV distribution design and load calculations.• Power studies • Grounding studies • Electrical control system design and drawing packages.• RFQ for Equipment Vendors and Manufacturers.• Bid Evaluations from Equipment Vendors, Manufacturers and Contractors.• Single-line Diagrams, Layouts, Grounding, Lighting, Schematics, Cabling System design• Control loop diagrams• P&IDs, Selection and Procurement of instrumentation• Automation system design, network architecture, PLCs, HMIs• Functional Specifications, Design Criteria• Load Lists, Instrument Lists, Signal Lists, Cable Lists• Supervision of engineers, designers and drafters• Budget pricing• Project scheduling• Construction work package preparation• Preparation of MTO’s and cost estimates• Field inspection and on-site construction support• Startup and Commissioning supportAdvantagesAbility to work with a dynamic growing organization.Competitive compensation and an opportunity for long term work.Responsibilities• Electrical MV and LV distribution design and load calculations.• Power studies • Grounding studies • Electrical control system design and drawing packages.• RFQ for Equipment Vendors and Manufacturers.• Bid Evaluations from Equipment Vendors, Manufacturers and Contractors.• Single-line Diagrams, Layouts, Grounding, Lighting, Schematics, Cabling System design• Control loop diagrams• P&IDs, Selection and Procurement of instrumentation• Automation system design, network architecture, PLCs, HMIs• Functional Specifications, Design Criteria• Load Lists, Instrument Lists, Signal Lists, Cable Lists• Supervision of engineers, designers and drafters• Budget pricing• Project scheduling• Construction work package preparation• Preparation of MTO’s and cost estimates• Field inspection and on-site construction support• Startup and Commissioning supportQualificationsDegree in Electrical EngineeringExperience with established Consulting Engineering companiesMining Industry project experience an assetSummaryTo apply, email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you a Senior Electrical Engineer with Mining project Experience?Are you looking for an opportunity with a dynamic organization that is growing?If so, this could be the role for you!Work will involve:• Leading an Electrical group in a growing Consulting Engineering environment• Electrical MV and LV distribution design and load calculations.• Power studies • Grounding studies • Electrical control system design and drawing packages.• RFQ for Equipment Vendors and Manufacturers.• Bid Evaluations from Equipment Vendors, Manufacturers and Contractors.• Single-line Diagrams, Layouts, Grounding, Lighting, Schematics, Cabling System design• Control loop diagrams• P&IDs, Selection and Procurement of instrumentation• Automation system design, network architecture, PLCs, HMIs• Functional Specifications, Design Criteria• Load Lists, Instrument Lists, Signal Lists, Cable Lists• Supervision of engineers, designers and drafters• Budget pricing• Project scheduling• Construction work package preparation• Preparation of MTO’s and cost estimates• Field inspection and on-site construction support• Startup and Commissioning supportAdvantagesAbility to work with a dynamic growing organization.Competitive compensation and an opportunity for long term work.Responsibilities• Electrical MV and LV distribution design and load calculations.• Power studies • Grounding studies • Electrical control system design and drawing packages.• RFQ for Equipment Vendors and Manufacturers.• Bid Evaluations from Equipment Vendors, Manufacturers and Contractors.• Single-line Diagrams, Layouts, Grounding, Lighting, Schematics, Cabling System design• Control loop diagrams• P&IDs, Selection and Procurement of instrumentation• Automation system design, network architecture, PLCs, HMIs• Functional Specifications, Design Criteria• Load Lists, Instrument Lists, Signal Lists, Cable Lists• Supervision of engineers, designers and drafters• Budget pricing• Project scheduling• Construction work package preparation• Preparation of MTO’s and cost estimates• Field inspection and on-site construction support• Startup and Commissioning supportQualificationsDegree in Electrical EngineeringExperience with established Consulting Engineering companiesMining Industry project experience an assetSummaryTo apply, email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Ottawa, Ontario
      • Contract
      Under the supervision of the Manager, Maintenance/ Lead Technicians; the Equipment Technician’s primary responsibility is to support and perform maintenance of all Manufacturing equipment and related equipment issues. Duties and Responsibilities•Provides support and performs maintenance for all card Manufacturing equipment & related issues. Monitor, maintain and calibrate equipment in areas such as the card assembly line, HVAC units for card line enclosure, building air compressor, in according with approved procedures•Provides support to daily card production, R&D experiments and potential future projects•Assists in the determination of root cause of failures and problems with automation equipment. Communicates effectively, verbally and in writing, to various groups affiliated with card manufacturing•Assesses multiple process variables and their interactions and then provides a reasoned, rapid response to issues revealed by test results•Troubleshooting and repair of equipment failures and operational problems•Documentation of equipment maintenance activities in maintenance logs •Performs calibration procedures•Provides support as required for equipment mechanical and control system issues•Communicates equipment-related issues with Manufacturing and Mechanical Engineering•Creates consumables used in certain automated operations•Complies with documentation requirements to ensure equipment and production records are completed accuratelyAdvantagesKey Contacts•Reports directly to Manager, Maintenance.•Perform shift duties assigned by Lead technician.•Frequent interaction with engineers, Lead technicians, and card production operatorsResponsibilities•Flexibility to work overtime and on different shifts as required•Noisy and fast-paced manufacturing environment•Ability to work independently and take appropriate action as required•Flexibility to respond to a changing and evolving environment including the ability to interact effectively with all levels of the organization •Ability to participate in process, product, equipment, and component validations and verifications (e.g. new product introductions)•Adheres to change control protocols and maintenance procedures typical of medical device manufacturing settings•Excellent oral and written communication skills •Ability to work effectively in a team environment while satisfying personal responsibilities•Ready to speak up about concerns•PhysicaloManual dexterity oAbility to distinguish between coloursoExtended periods of standing and walkingoOccasional kneeling and crouchingQualifications•[Mechanical or Electrical Technician Diploma and/or an acceptable combination of education and experience •Mechanical and/or automation aptitude toward equipment troubleshooting and root cause analysis is considered as key asset•Familiarity with operation, assembly, and maintenance of electro-mechanical equipment•Experience working in a medical device manufacturing or electronic manufacturing setting is considered an asset•Proficient knowledge of MS Office (Word, Excel, Outlook, etc.)SummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.ca Thank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Under the supervision of the Manager, Maintenance/ Lead Technicians; the Equipment Technician’s primary responsibility is to support and perform maintenance of all Manufacturing equipment and related equipment issues. Duties and Responsibilities•Provides support and performs maintenance for all card Manufacturing equipment & related issues. Monitor, maintain and calibrate equipment in areas such as the card assembly line, HVAC units for card line enclosure, building air compressor, in according with approved procedures•Provides support to daily card production, R&D experiments and potential future projects•Assists in the determination of root cause of failures and problems with automation equipment. Communicates effectively, verbally and in writing, to various groups affiliated with card manufacturing•Assesses multiple process variables and their interactions and then provides a reasoned, rapid response to issues revealed by test results•Troubleshooting and repair of equipment failures and operational problems•Documentation of equipment maintenance activities in maintenance logs •Performs calibration procedures•Provides support as required for equipment mechanical and control system issues•Communicates equipment-related issues with Manufacturing and Mechanical Engineering•Creates consumables used in certain automated operations•Complies with documentation requirements to ensure equipment and production records are completed accuratelyAdvantagesKey Contacts•Reports directly to Manager, Maintenance.•Perform shift duties assigned by Lead technician.•Frequent interaction with engineers, Lead technicians, and card production operatorsResponsibilities•Flexibility to work overtime and on different shifts as required•Noisy and fast-paced manufacturing environment•Ability to work independently and take appropriate action as required•Flexibility to respond to a changing and evolving environment including the ability to interact effectively with all levels of the organization •Ability to participate in process, product, equipment, and component validations and verifications (e.g. new product introductions)•Adheres to change control protocols and maintenance procedures typical of medical device manufacturing settings•Excellent oral and written communication skills •Ability to work effectively in a team environment while satisfying personal responsibilities•Ready to speak up about concerns•PhysicaloManual dexterity oAbility to distinguish between coloursoExtended periods of standing and walkingoOccasional kneeling and crouchingQualifications•[Mechanical or Electrical Technician Diploma and/or an acceptable combination of education and experience •Mechanical and/or automation aptitude toward equipment troubleshooting and root cause analysis is considered as key asset•Familiarity with operation, assembly, and maintenance of electro-mechanical equipment•Experience working in a medical device manufacturing or electronic manufacturing setting is considered an asset•Proficient knowledge of MS Office (Word, Excel, Outlook, etc.)SummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.ca Thank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Vancouver, British Columbia
      • Contract
      We are seeking an experienced Test Engineer for a long term contract engagement with a well established medical device manufacturing client of ours in the Vancouver area. There is a strong possibility of this position becoming a permanent role for the right candidate. In this role you will be responsible for design verification: from creating initial test plans through documenting results in test reports that are included in regulatory submissions. Communication and coordination is essential to share/ coordinate test execution, samples, test results, and timelines with a cross-functional project team.Advantages-Excellent pay rate-Opportunity for permanent employment with a leading medical device companyResponsibilities-Communicate with SMEs to understand and interpret testing data and functional specifications regarding material, physical properties, optical, mechanical characteristics-Familiar with mechanical, physical, optical, and electrical test methods,-Communicate with suppliers to collect and analyze product data and certification such as raw material certification and other relevant evidence to show proof that products meet specific criteria or standards-Collaboration with R&D and RA to identify testing requirements (sample size, typical sample selection, statistical data analysis, etc.)-Create protocols in accordance with China standards and applicable procedures-Coordinate obtaining, receipt and disposition of test samples-Manage the technical conduct of the test-Collaborate with RA and China team to work with China test vendors if testing is outsourced to China test lab-Create a test report/ adoption records/ DHD files when adoption is applicableQualifications-Bachelor's degree in mechanical, biomedical, or biomechanical engineering with 5+ years related experience-Mechanical/electrical problem solving skills-Analytical skills-Initiative, dependability, independent, detail oriented Preferred skills-Test engineering experience in a regulated industry-Ability to build collaborative relationships quickly (internally and externally)-Strong technical writing skills in English and Mandarin-Experience with CAD (Solidworks, Creo)-Automation experience-Familiarity with common mechanical test methods and equipmentSummaryIf you would like to be considered for this opportunity please forward your resume via email to Nick Paraskeva | nick.paraskeva@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      We are seeking an experienced Test Engineer for a long term contract engagement with a well established medical device manufacturing client of ours in the Vancouver area. There is a strong possibility of this position becoming a permanent role for the right candidate. In this role you will be responsible for design verification: from creating initial test plans through documenting results in test reports that are included in regulatory submissions. Communication and coordination is essential to share/ coordinate test execution, samples, test results, and timelines with a cross-functional project team.Advantages-Excellent pay rate-Opportunity for permanent employment with a leading medical device companyResponsibilities-Communicate with SMEs to understand and interpret testing data and functional specifications regarding material, physical properties, optical, mechanical characteristics-Familiar with mechanical, physical, optical, and electrical test methods,-Communicate with suppliers to collect and analyze product data and certification such as raw material certification and other relevant evidence to show proof that products meet specific criteria or standards-Collaboration with R&D and RA to identify testing requirements (sample size, typical sample selection, statistical data analysis, etc.)-Create protocols in accordance with China standards and applicable procedures-Coordinate obtaining, receipt and disposition of test samples-Manage the technical conduct of the test-Collaborate with RA and China team to work with China test vendors if testing is outsourced to China test lab-Create a test report/ adoption records/ DHD files when adoption is applicableQualifications-Bachelor's degree in mechanical, biomedical, or biomechanical engineering with 5+ years related experience-Mechanical/electrical problem solving skills-Analytical skills-Initiative, dependability, independent, detail oriented Preferred skills-Test engineering experience in a regulated industry-Ability to build collaborative relationships quickly (internally and externally)-Strong technical writing skills in English and Mandarin-Experience with CAD (Solidworks, Creo)-Automation experience-Familiarity with common mechanical test methods and equipmentSummaryIf you would like to be considered for this opportunity please forward your resume via email to Nick Paraskeva | nick.paraskeva@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      Are you a Technical Safety Specialist with experience in Rail Signaling?Are you looking to join a company that's a leader in it's field?If so, this could be the opportunity for you!We are looking for a highly motivated, self-starter Technical Safety Specialist to join the Safety Engineering department in our client's Urban Rail Signaling business line.AdvantagesThe Technical Safety Specialist provides technical safety leadership to the safety team, is responsible for enforcing the safety strategy, developing and continuously improving safety methodologies, execution of Safety Engineering activities in accordance with the company’s process, applicable industry standards, best practices and sharing expert knowledge.ResponsibilitiesEnsure that the Safety Engineering activities are executed in accordance with the company’s process, applicable industry standards and best practices Perform hazard identification studies (HAZID, HAZOP), hazard analyses (PHA, SHA, OSHA, FTA), safety analyses (FFMEA, FMECA, FSA) and hazard management Define safety requirements; analyze and evaluate design compliance with safety requirements and safety principles Review the adequacy and completeness of the safety evidences and produce the corresponding Safety Case artifacts Provide technical safety leadership to the project Safety Engineering team; work as part of an integrated project team, promoting the company's safety policy, best practices and train other staff Report directly to the Manager, RAMS Engineering and liaise with the Chief Safety ArchitectQualificationsB.Sc. in Electronics, Computer Science, Electrical Engineering or equivalentMinimum 2-3 years of experience in train control systems or automationKnowledge of railway signaling systems, train control systems, fixed and moving block signaling principles, relay-based and/or computer-based interlocking designGood understanding of systems engineering, software engineering and functional safetyDetailed knowledge of system safety lifecycle, system requirements definition, safety design concepts (system and software), safety and risk analysisGood technical writing skills, excellent communication and analytical skills; excellent command of the English language, both written and oralPreferred Qualifications:: M.Sc. in Electronics, Computer Science, Electrical Engineering or equivalentExtensive experience with safety standards (CENELEC, IEC, IEEE, MIL), best practices, safety methods and techniques (HAZID, HAZOP, PHA, SHA, OSHA, FTA, FMEA/FMECA, FSA) and hazard managementWorking knowledge of Communications-Based Train Control (CBTC) and/or Solid-State Interlocking (SSI)Member of Professional Engineer of Ontario (PEO) or Institution of Railway Signal Engineers (IRSE)Education:B.Sc. in Electronics, Computer Science, Electrical Engineering or equivalentSummaryIf this is the position for you, APPLY ONLINE or email resume to Mina Khalil at mina.khalil@randstad.caOnly qualified candidates will be contacted.Please visit www.randstad.ca for a complete list of opportunitiesRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you a Technical Safety Specialist with experience in Rail Signaling?Are you looking to join a company that's a leader in it's field?If so, this could be the opportunity for you!We are looking for a highly motivated, self-starter Technical Safety Specialist to join the Safety Engineering department in our client's Urban Rail Signaling business line.AdvantagesThe Technical Safety Specialist provides technical safety leadership to the safety team, is responsible for enforcing the safety strategy, developing and continuously improving safety methodologies, execution of Safety Engineering activities in accordance with the company’s process, applicable industry standards, best practices and sharing expert knowledge.ResponsibilitiesEnsure that the Safety Engineering activities are executed in accordance with the company’s process, applicable industry standards and best practices Perform hazard identification studies (HAZID, HAZOP), hazard analyses (PHA, SHA, OSHA, FTA), safety analyses (FFMEA, FMECA, FSA) and hazard management Define safety requirements; analyze and evaluate design compliance with safety requirements and safety principles Review the adequacy and completeness of the safety evidences and produce the corresponding Safety Case artifacts Provide technical safety leadership to the project Safety Engineering team; work as part of an integrated project team, promoting the company's safety policy, best practices and train other staff Report directly to the Manager, RAMS Engineering and liaise with the Chief Safety ArchitectQualificationsB.Sc. in Electronics, Computer Science, Electrical Engineering or equivalentMinimum 2-3 years of experience in train control systems or automationKnowledge of railway signaling systems, train control systems, fixed and moving block signaling principles, relay-based and/or computer-based interlocking designGood understanding of systems engineering, software engineering and functional safetyDetailed knowledge of system safety lifecycle, system requirements definition, safety design concepts (system and software), safety and risk analysisGood technical writing skills, excellent communication and analytical skills; excellent command of the English language, both written and oralPreferred Qualifications:: M.Sc. in Electronics, Computer Science, Electrical Engineering or equivalentExtensive experience with safety standards (CENELEC, IEC, IEEE, MIL), best practices, safety methods and techniques (HAZID, HAZOP, PHA, SHA, OSHA, FTA, FMEA/FMECA, FSA) and hazard managementWorking knowledge of Communications-Based Train Control (CBTC) and/or Solid-State Interlocking (SSI)Member of Professional Engineer of Ontario (PEO) or Institution of Railway Signal Engineers (IRSE)Education:B.Sc. in Electronics, Computer Science, Electrical Engineering or equivalentSummaryIf this is the position for you, APPLY ONLINE or email resume to Mina Khalil at mina.khalil@randstad.caOnly qualified candidates will be contacted.Please visit www.randstad.ca for a complete list of opportunitiesRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Concord, Ontario
      • Permanent
      Manufacturing EngineerVaughan, ONIn this role, you will be providing manufacturing data and suggestions to the Product Engineering, Design and Customer Service departments so that all manufacturing aspects are considered, to ensure the effective production process is in place and interact with various departments through projects, to meet the company’s current and future objectiveAdvantagesCompetitive SalaryBenefitsvacationPermanent opportunitypotential growth opportunityResponsibilities1. Ensure new product or engineering change implementations occur in production by supplying information to the involved parties, coordination of ordering proper equipment and tooling, implementing processes on the shop floor, and updating engineering product drawings in the database.2. Prototyping new products on the shop floor; preparing special samples and enduring the accuracy of product against design drawings.3. Involvement with new product, process and quality planning (APQP), PPAP, BOM reviews, tooling reviews to support designed parts and process changes. Liaise with related departments for timely execution of the action items.4. For existing and new products, analyze the costs, materials and labor requirements and as well, issue Engineering Change Requests, modify tooling, layouts (to improve capacity load of product) and material handling to constantly improve the manufacturing process.5. Observe production process and identify process improvement opportunities, work with production and guide supervisors on 6S projects and Kaizen activities, support when needed or lead as needed.6. Support ISO9001& ISO14001 process by conducting activities as such issuing Process Control Sheets for all equipment, doing first off inspections and giving advice for equipment maintenance.7. Liaise with vendors by developing specifications and participating in the design and commissioning of new equipment and/or installations. Also coordinate and negotiate service contracts as necessary.8. Ensure that the manufacturing equipment and manufacturing facilities are operational and safe by evaluating, recommending, developing and implementing preventative maintenance procedures which will also minimize production interruption/delays.9. Support development and implementation of Health & Safety procedures, and then train and educate the shop floor personnel accordingly.10. Keep the company aware of the current technological advances; introduce new technology and automation through justification analysis in order to achieve cost reduction, improve quality and the work environment; ensure necessary paperwork (C.A.R.A. form) is generated.11. Support plant supervisors and lead hands to clarify drawings and special orders so that ship dates and customer expectations are met.12. Support cost reduction programs and value-added/value engineering opportunities.14. Evaluate and approve Temporary Deviation Requests that could be generated internally or externallyQualificationsUniversity engineering degree or equivalent•1-3 years experience in a manufacturing environment.•Computer drafting (AutoCad, Solidworks,..) / Data analysis on spreadsheets / MS Office Applications / CNC Machining ProcessSummaryIf this sounds like a great fit for you please APPLY ONLINE or forward your resume directly to Swapna at swapna.nair@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Manufacturing EngineerVaughan, ONIn this role, you will be providing manufacturing data and suggestions to the Product Engineering, Design and Customer Service departments so that all manufacturing aspects are considered, to ensure the effective production process is in place and interact with various departments through projects, to meet the company’s current and future objectiveAdvantagesCompetitive SalaryBenefitsvacationPermanent opportunitypotential growth opportunityResponsibilities1. Ensure new product or engineering change implementations occur in production by supplying information to the involved parties, coordination of ordering proper equipment and tooling, implementing processes on the shop floor, and updating engineering product drawings in the database.2. Prototyping new products on the shop floor; preparing special samples and enduring the accuracy of product against design drawings.3. Involvement with new product, process and quality planning (APQP), PPAP, BOM reviews, tooling reviews to support designed parts and process changes. Liaise with related departments for timely execution of the action items.4. For existing and new products, analyze the costs, materials and labor requirements and as well, issue Engineering Change Requests, modify tooling, layouts (to improve capacity load of product) and material handling to constantly improve the manufacturing process.5. Observe production process and identify process improvement opportunities, work with production and guide supervisors on 6S projects and Kaizen activities, support when needed or lead as needed.6. Support ISO9001& ISO14001 process by conducting activities as such issuing Process Control Sheets for all equipment, doing first off inspections and giving advice for equipment maintenance.7. Liaise with vendors by developing specifications and participating in the design and commissioning of new equipment and/or installations. Also coordinate and negotiate service contracts as necessary.8. Ensure that the manufacturing equipment and manufacturing facilities are operational and safe by evaluating, recommending, developing and implementing preventative maintenance procedures which will also minimize production interruption/delays.9. Support development and implementation of Health & Safety procedures, and then train and educate the shop floor personnel accordingly.10. Keep the company aware of the current technological advances; introduce new technology and automation through justification analysis in order to achieve cost reduction, improve quality and the work environment; ensure necessary paperwork (C.A.R.A. form) is generated.11. Support plant supervisors and lead hands to clarify drawings and special orders so that ship dates and customer expectations are met.12. Support cost reduction programs and value-added/value engineering opportunities.14. Evaluate and approve Temporary Deviation Requests that could be generated internally or externallyQualificationsUniversity engineering degree or equivalent•1-3 years experience in a manufacturing environment.•Computer drafting (AutoCad, Solidworks,..) / Data analysis on spreadsheets / MS Office Applications / CNC Machining ProcessSummaryIf this sounds like a great fit for you please APPLY ONLINE or forward your resume directly to Swapna at swapna.nair@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Brampton, Ontario
      • Contract
      JOB SUMMARYUnder the responsibility of the Engineering Manager & Logistics Engineer, the Electro Mechanical Technician is responsible to provide on-site technical and maintenance support on different aspects related to the robotic cartonization system.RESPONSIBILITIES• Participate in engineering test performance of electromechanical assemblies, analyze and record test results, prepare written testing documentation and make the appropriate changes related to the Robotic Cartonization System, including slotting, process improvement, etc.• Perform minor facility maintenance work. Coordinate service maintenance and support with external contractors (for both the Robotic System and the facility). • Provide technical and maintenance support related to the Robotic Cartonization System. • Diagnose and resolve problems related to the Robotic Cartonization System. • Act as liaison between Operations and Engineering, including providing technical support to business owner and other technicians in operating the automation as well as training operations personnel in the proper use of the equipment.• Repair, rework and calibrate electromechanical components in order to meet engineering specifications. • May be required to work during the core hour shift in some occasions • Coordinates spare parts purchasing with suppliers and maintains/controls records of the spare part inventory (for both Robotic System and the facility).• Maintains a safe distribution center and participates in the Health and Safety Committee.This is a night shift position, 8pm-4am.AdvantagesThis is an opportunity to join a large organization that is a true leader in it's field.Could lead to a longer term opportunity.ResponsibilitiesADDITIONAL RESPONSIBILITIES• Position requires some traveling• Work is on the night shift, 8pm-4am.• Performs other duties as assigned.QualificationsEducation Major/Area of Study Required/PreferredCollege degree/Technical Certification Degree in Electromechanical Engineering. A combination of other education and experiences will be considered requiredExperienceTwo (2) years or more Experience in a similar position requiredTwo (2) years or more Experience in a fast-paced warehouse environment requiredTwo (2) years or more Experience in conducting tests and inspections of products and processes to evaluate quality and performance requiredTwo (2) years or more Experience in service and maintenance of electromechanical components requiredTwo (2) years or more Experience in preparing and conducting training requiredTwo (2) years or more Experience with trouble shooting of automated systems requiredSummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      JOB SUMMARYUnder the responsibility of the Engineering Manager & Logistics Engineer, the Electro Mechanical Technician is responsible to provide on-site technical and maintenance support on different aspects related to the robotic cartonization system.RESPONSIBILITIES• Participate in engineering test performance of electromechanical assemblies, analyze and record test results, prepare written testing documentation and make the appropriate changes related to the Robotic Cartonization System, including slotting, process improvement, etc.• Perform minor facility maintenance work. Coordinate service maintenance and support with external contractors (for both the Robotic System and the facility). • Provide technical and maintenance support related to the Robotic Cartonization System. • Diagnose and resolve problems related to the Robotic Cartonization System. • Act as liaison between Operations and Engineering, including providing technical support to business owner and other technicians in operating the automation as well as training operations personnel in the proper use of the equipment.• Repair, rework and calibrate electromechanical components in order to meet engineering specifications. • May be required to work during the core hour shift in some occasions • Coordinates spare parts purchasing with suppliers and maintains/controls records of the spare part inventory (for both Robotic System and the facility).• Maintains a safe distribution center and participates in the Health and Safety Committee.This is a night shift position, 8pm-4am.AdvantagesThis is an opportunity to join a large organization that is a true leader in it's field.Could lead to a longer term opportunity.ResponsibilitiesADDITIONAL RESPONSIBILITIES• Position requires some traveling• Work is on the night shift, 8pm-4am.• Performs other duties as assigned.QualificationsEducation Major/Area of Study Required/PreferredCollege degree/Technical Certification Degree in Electromechanical Engineering. A combination of other education and experiences will be considered requiredExperienceTwo (2) years or more Experience in a similar position requiredTwo (2) years or more Experience in a fast-paced warehouse environment requiredTwo (2) years or more Experience in conducting tests and inspections of products and processes to evaluate quality and performance requiredTwo (2) years or more Experience in service and maintenance of electromechanical components requiredTwo (2) years or more Experience in preparing and conducting training requiredTwo (2) years or more Experience with trouble shooting of automated systems requiredSummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Oakville, Ontario
      • Permanent
      Are you a Project Engineer with an Electrical Background?Do you thrive with diverse projects and a dynamic environment?If so, this could be the opportunity for you!The Project Engineer is responsible for the design and specification of the electrical system on projects and initiatives.Create full design packages including BOM, detail drawings, assembly drawings and layoutsCheck & validate all final design documentation, parts lists, and drawings according to design & contract requirements, to ensure completeness & accuracyReview and interpret customer and vendor drawings and specificationsDesign or coordinate the design of the MCC, wiring schematics, and power distributionWrite, test, and commission PLC and HMI codePrepare contractor and scope of work instructionsPrepares electrical layout and detailed drawings and schematics.Interpret technical specifications & application parameters;Conceptualize new designs;Select cost-effective OEM components;Project work will require up to 35% travelAdvantagesTotal compensation includes competitive compensation, very comprehensive medical/dental programs as well as life insurance, and a generous paid time off program.ResponsibilitiesThe Project Engineer is responsible for the design and specification of the electrical system on projects and initiatives.Create full design packages including BOM, detail drawings, assembly drawings and layoutsCheck & validate all final design documentation, parts lists, and drawings according to design & contract requirements, to ensure completeness & accuracyReview and interpret customer and vendor drawings and specificationsDesign or coordinate the design of the MCC, wiring schematics, and power distributionWrite, test, and commission PLC and HMI codePrepare contractor and scope of work instructionsPrepares electrical layout and detailed drawings and schematics.Interpret technical specifications & application parameters;Conceptualize new designs;Select cost-effective OEM components;Qualifications7+ years of Electrical/Controls Engineering experienceBachelor’s degree in electrical engineering or equivalentP. Eng preferredExperience with automation production line design and working with end-users in a consulting capacity is a mustExperience with low voltage power distribution (600V).Experience with communications networksPLC programming experience in Allen Bradley and/or Siemens PLCs is required.Experience with industrial robots is an assetExperience with Factory Talk Studio or Wonderware would be preferred.Experience with servo system design and programming is preferred.Solid AutoCAD skills required.Good knowledge of North American electrical standards for equipment manufacturingMust have the ability to travel (particularly to the US) SummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positionsRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you a Project Engineer with an Electrical Background?Do you thrive with diverse projects and a dynamic environment?If so, this could be the opportunity for you!The Project Engineer is responsible for the design and specification of the electrical system on projects and initiatives.Create full design packages including BOM, detail drawings, assembly drawings and layoutsCheck & validate all final design documentation, parts lists, and drawings according to design & contract requirements, to ensure completeness & accuracyReview and interpret customer and vendor drawings and specificationsDesign or coordinate the design of the MCC, wiring schematics, and power distributionWrite, test, and commission PLC and HMI codePrepare contractor and scope of work instructionsPrepares electrical layout and detailed drawings and schematics.Interpret technical specifications & application parameters;Conceptualize new designs;Select cost-effective OEM components;Project work will require up to 35% travelAdvantagesTotal compensation includes competitive compensation, very comprehensive medical/dental programs as well as life insurance, and a generous paid time off program.ResponsibilitiesThe Project Engineer is responsible for the design and specification of the electrical system on projects and initiatives.Create full design packages including BOM, detail drawings, assembly drawings and layoutsCheck & validate all final design documentation, parts lists, and drawings according to design & contract requirements, to ensure completeness & accuracyReview and interpret customer and vendor drawings and specificationsDesign or coordinate the design of the MCC, wiring schematics, and power distributionWrite, test, and commission PLC and HMI codePrepare contractor and scope of work instructionsPrepares electrical layout and detailed drawings and schematics.Interpret technical specifications & application parameters;Conceptualize new designs;Select cost-effective OEM components;Qualifications7+ years of Electrical/Controls Engineering experienceBachelor’s degree in electrical engineering or equivalentP. Eng preferredExperience with automation production line design and working with end-users in a consulting capacity is a mustExperience with low voltage power distribution (600V).Experience with communications networksPLC programming experience in Allen Bradley and/or Siemens PLCs is required.Experience with industrial robots is an assetExperience with Factory Talk Studio or Wonderware would be preferred.Experience with servo system design and programming is preferred.Solid AutoCAD skills required.Good knowledge of North American electrical standards for equipment manufacturingMust have the ability to travel (particularly to the US) SummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positionsRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Brampton, Ontario
      • Permanent
      Our Injection Molding client in Brampton has partnered with Randstad Engineering to help find an experienced Manufacturing Engineering Manager to add to their team.Position: Manufacturing Engineering ManagerReports To: Sr Vice President, ManufacturingDepartment: ManufacturingLocation- Brampton, ONSalary Depends On Experience + Bonus + RRSP Benefits Etc.Industry – Plastic Injection Molding If you are interested in this opportunity, please send your RESUME directly to Ankur Vaid at ankur.vaid@randstad.caAdvantagesThis is a Full-time opportunity with Benefits and a competitive salary package.ResponsibilitiesSUMMARY: The Manufacturing Engineering Manager will collaborate with the planning, scheduling, manufacturing and engineering teams, to analyze, develop and innovate, improve manufacturing methods and drive innovation throughout the Operation.MAJOR RESPONSIBILITIES:•Be the technical lead and head problem-solving resource for all machining processes utilizing the latest technological tooling processes.•Drive the OEE (Overall Equipment Effectiveness). While managing the OEE KPI, identify the percentage of planned production time that is truly productive.•Utilizing advanced equipment range, develop and plan efficient manufacturing methods from initial machining through to finishing.•Work with the Manufacturing team to ensure work throughput is improved while achieving maximum machine tool life.•Work with the Engineering team in utilizing/developing/customizing the CAD/CAM software to improve the efficiency of CAM programming.•Participating in engineering design reviews and design for manufacturing meetings to provide guidance with respect to best manufacturing methods.•Communicating with Scheduling, Process Planning, Engineering, the CAM Team and Operations on a regular basis to understand machine selection and loading.•Use Lean Manufacturing and Industry 4.0 principles to enhance manufacturing quality, reliability and cost-effectiveness.•Technical resource for new machining methods, equipment selection, automation projects and advanced machining methods. •Thought leader for best practices in the area of Manufacturing Engineering as part of Digital Transformation initiative.•Will participate in the selection and implementation of an ERP software as a representative of the Manufacturing Team.QualificationsMINIMUM QUALIFICATIONS: TECHNICAL KNOWLEDGE/EXPERIENCE•Post-Secondary education – Engineering degree with 3–5 years related ETO machining industry experience•P. Eng. License / EIT required•Strong computer skills – Microsoft (Excel, Word, PowerPoint, Project)•Firm understanding of working in a 3D CAD-CAM environment using Unigraphics / Siemens NX / Teamcenter preferred•Ability to provide a concise analytical evaluation of manufacturing issues and provide ROI for capital requests.•Highly effective communication and interpersonal skillsBEHAVIOURAL /PHYSICAL DEMANDS•Decision Making: Utilizing effective processes to make decisions.•Teamwork: Working effectively with others – Project implementation involvement.•Analytical Skills: Strong analytical and problem-solving aptitude. Attention to detail.•Interpersonal Skills: Effectively communicating, building rapport and relating well to people.SummaryIf you are interested in this opportunity, please send your resume directly to Ankur Vaid at ankur.vaid@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our Injection Molding client in Brampton has partnered with Randstad Engineering to help find an experienced Manufacturing Engineering Manager to add to their team.Position: Manufacturing Engineering ManagerReports To: Sr Vice President, ManufacturingDepartment: ManufacturingLocation- Brampton, ONSalary Depends On Experience + Bonus + RRSP Benefits Etc.Industry – Plastic Injection Molding If you are interested in this opportunity, please send your RESUME directly to Ankur Vaid at ankur.vaid@randstad.caAdvantagesThis is a Full-time opportunity with Benefits and a competitive salary package.ResponsibilitiesSUMMARY: The Manufacturing Engineering Manager will collaborate with the planning, scheduling, manufacturing and engineering teams, to analyze, develop and innovate, improve manufacturing methods and drive innovation throughout the Operation.MAJOR RESPONSIBILITIES:•Be the technical lead and head problem-solving resource for all machining processes utilizing the latest technological tooling processes.•Drive the OEE (Overall Equipment Effectiveness). While managing the OEE KPI, identify the percentage of planned production time that is truly productive.•Utilizing advanced equipment range, develop and plan efficient manufacturing methods from initial machining through to finishing.•Work with the Manufacturing team to ensure work throughput is improved while achieving maximum machine tool life.•Work with the Engineering team in utilizing/developing/customizing the CAD/CAM software to improve the efficiency of CAM programming.•Participating in engineering design reviews and design for manufacturing meetings to provide guidance with respect to best manufacturing methods.•Communicating with Scheduling, Process Planning, Engineering, the CAM Team and Operations on a regular basis to understand machine selection and loading.•Use Lean Manufacturing and Industry 4.0 principles to enhance manufacturing quality, reliability and cost-effectiveness.•Technical resource for new machining methods, equipment selection, automation projects and advanced machining methods. •Thought leader for best practices in the area of Manufacturing Engineering as part of Digital Transformation initiative.•Will participate in the selection and implementation of an ERP software as a representative of the Manufacturing Team.QualificationsMINIMUM QUALIFICATIONS: TECHNICAL KNOWLEDGE/EXPERIENCE•Post-Secondary education – Engineering degree with 3–5 years related ETO machining industry experience•P. Eng. License / EIT required•Strong computer skills – Microsoft (Excel, Word, PowerPoint, Project)•Firm understanding of working in a 3D CAD-CAM environment using Unigraphics / Siemens NX / Teamcenter preferred•Ability to provide a concise analytical evaluation of manufacturing issues and provide ROI for capital requests.•Highly effective communication and interpersonal skillsBEHAVIOURAL /PHYSICAL DEMANDS•Decision Making: Utilizing effective processes to make decisions.•Teamwork: Working effectively with others – Project implementation involvement.•Analytical Skills: Strong analytical and problem-solving aptitude. Attention to detail.•Interpersonal Skills: Effectively communicating, building rapport and relating well to people.SummaryIf you are interested in this opportunity, please send your resume directly to Ankur Vaid at ankur.vaid@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Mississauga, Ontario
      • Permanent
      Are you an Applications Engineer looking for a new challenge?Do you have a background in Hydraulic systems?Would you like to join a growing organization with many advantages?If so, this could be the opportunity for you!Ideal candidate will have a minimum 5 to 10 years of experience designing, quoting and developing electrohydraulic and mechanical design projects. The candidate must have the ability to work with customers to gather requirements; define functional specifications, block diagrams, hydraulic schematics; define, locate and acquire material required to assemble project; estimate material and labor cost; develop work instructions for manufacturing assembly and test. Applicant must have experience troubleshooting and repairing hydraulic systems. Experience with utilizing control automation to operate PLC or computer based hydraulic control system is considered a plus. AdvantagesCompetitive SalaryRRSP ProgramCompany BenefitsChance to work in a dynamic industry with a wide variety of clients.ResponsibilitiesGeneral Duties:•The position will work closely with account managers to establish customer requirements and design documents for Hydraulic projects. The Application Engineer’s role is to interpret the customer’s requirements and lead the design effort to optimize the project scope and design to meet those requirements. •The Application Engineer will produce conceptual designs, block diagrams, functional specifications and schematics to evaluate design alternatives and tradeoffs to meet customer requirements. The technician with make recommendations for final design and budget based on customer requirements, customer budget, schedule constraints and competitive pressures.•Work on the development of designs that are efficient in design, extendable, clearly and frequently documented, and adheres to standards and conventions. Design for manufacturability and testability. Deliver designs without error, that correctly performs all the specified functions, leverages available Hydraulic and component technologies, and that incorporates designs available for reuse. •As a design project lead, the application engineers is responsible for defining, locating and acquiring material required to complete the assembly of their project. This work is completed by working with Hydra-Fab purchasing personnel to acquire the correct material, at the desired cost on the specific delivery date to meet the customer’s overall request for the project delivery date.•Provide engineering release documentation to the manufacturing team to enable production of the final product. This includes functional specifications, schematics, bill of material, manufacturing work instructions, test procedures and operating manuals. Work with the manufacturing team to address problems during the assembly and test process to ensure project is completed according to the production and delivery schedule.•Working with the manufacturing team, complete thorough system tests to ensure that designs work properly for all possible operating conditions including nominal, upper and lower limits. Support and maintain design through unit test, final integration test and quality testing through release to customer. •Assist the work planning and estimation efforts to develop project schedules and project budgets for Hydraulic development projects; execute to deliver the project per delivery schedule and budget. •Attend internal project review meetings to review technical designs and plans including project budget and delivery schedule, address technical concerns identified during reviews and any roadblocks impacting cost and delivery. •Participate in continuing engineering efforts by understanding customer service issues reported through the field service escalation process and assist engineering management in the resource allocation process for addressing such concerns.•Participate in understanding and defining key engineering processes. Analyzing each process to identify how it can be continuously improved to make the engineering team overall more effective. QualificationsWork Experience Requirements:•Five or more years’ experience in the design and application of fluid power systems.•Experience in AutoCad creating and drawing hydraulic schematics.Education Requirements:•College diploma.Special Skill Requirements:•Forklift license.•Machinist certification.•CAD/CAM.On-The-Job/Operational Training Requirements:•ERP System.•Product identification.•Machine maintenance.•Picking material.•Trouble shooting.•Inspection.•Non-conforming product.•Calibration.•Etc.SummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you an Applications Engineer looking for a new challenge?Do you have a background in Hydraulic systems?Would you like to join a growing organization with many advantages?If so, this could be the opportunity for you!Ideal candidate will have a minimum 5 to 10 years of experience designing, quoting and developing electrohydraulic and mechanical design projects. The candidate must have the ability to work with customers to gather requirements; define functional specifications, block diagrams, hydraulic schematics; define, locate and acquire material required to assemble project; estimate material and labor cost; develop work instructions for manufacturing assembly and test. Applicant must have experience troubleshooting and repairing hydraulic systems. Experience with utilizing control automation to operate PLC or computer based hydraulic control system is considered a plus. AdvantagesCompetitive SalaryRRSP ProgramCompany BenefitsChance to work in a dynamic industry with a wide variety of clients.ResponsibilitiesGeneral Duties:•The position will work closely with account managers to establish customer requirements and design documents for Hydraulic projects. The Application Engineer’s role is to interpret the customer’s requirements and lead the design effort to optimize the project scope and design to meet those requirements. •The Application Engineer will produce conceptual designs, block diagrams, functional specifications and schematics to evaluate design alternatives and tradeoffs to meet customer requirements. The technician with make recommendations for final design and budget based on customer requirements, customer budget, schedule constraints and competitive pressures.•Work on the development of designs that are efficient in design, extendable, clearly and frequently documented, and adheres to standards and conventions. Design for manufacturability and testability. Deliver designs without error, that correctly performs all the specified functions, leverages available Hydraulic and component technologies, and that incorporates designs available for reuse. •As a design project lead, the application engineers is responsible for defining, locating and acquiring material required to complete the assembly of their project. This work is completed by working with Hydra-Fab purchasing personnel to acquire the correct material, at the desired cost on the specific delivery date to meet the customer’s overall request for the project delivery date.•Provide engineering release documentation to the manufacturing team to enable production of the final product. This includes functional specifications, schematics, bill of material, manufacturing work instructions, test procedures and operating manuals. Work with the manufacturing team to address problems during the assembly and test process to ensure project is completed according to the production and delivery schedule.•Working with the manufacturing team, complete thorough system tests to ensure that designs work properly for all possible operating conditions including nominal, upper and lower limits. Support and maintain design through unit test, final integration test and quality testing through release to customer. •Assist the work planning and estimation efforts to develop project schedules and project budgets for Hydraulic development projects; execute to deliver the project per delivery schedule and budget. •Attend internal project review meetings to review technical designs and plans including project budget and delivery schedule, address technical concerns identified during reviews and any roadblocks impacting cost and delivery. •Participate in continuing engineering efforts by understanding customer service issues reported through the field service escalation process and assist engineering management in the resource allocation process for addressing such concerns.•Participate in understanding and defining key engineering processes. Analyzing each process to identify how it can be continuously improved to make the engineering team overall more effective. QualificationsWork Experience Requirements:•Five or more years’ experience in the design and application of fluid power systems.•Experience in AutoCad creating and drawing hydraulic schematics.Education Requirements:•College diploma.Special Skill Requirements:•Forklift license.•Machinist certification.•CAD/CAM.On-The-Job/Operational Training Requirements:•ERP System.•Product identification.•Machine maintenance.•Picking material.•Trouble shooting.•Inspection.•Non-conforming product.•Calibration.•Etc.SummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

    Thank you for subscribing to your personalised job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.