You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalised job alerts.

    3 jobs found for Design Engineer

    filter2
    clear all
      • North York, Ontario
      • Contract
      General Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience Must be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.Please send your resume in confidence to paul.dusome@randstad.ca AdvantagesSkills •Demonstrate specialized expertise and knowledge in the assigned field •Plan and organize activities / projects to meet section and organizational goals •Apply analytical skills •Understand and apply relevant laws and regulations •Identify and minimize risk of Health and Safety issues •Communicate in a variety of mediums •Use office technology, software and applications ResponsibilitiesGeneral Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience General Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience Must be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.Please send your resume in confidence to paul.dusome@randstad.ca Please send your resume in confidence to paul.dusome@randstad.ca QualificationsMust be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.SummaryGeneral Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience Must be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.Please send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      General Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience Must be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.Please send your resume in confidence to paul.dusome@randstad.ca AdvantagesSkills •Demonstrate specialized expertise and knowledge in the assigned field •Plan and organize activities / projects to meet section and organizational goals •Apply analytical skills •Understand and apply relevant laws and regulations •Identify and minimize risk of Health and Safety issues •Communicate in a variety of mediums •Use office technology, software and applications ResponsibilitiesGeneral Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience General Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience Must be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.Please send your resume in confidence to paul.dusome@randstad.ca Please send your resume in confidence to paul.dusome@randstad.ca QualificationsMust be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.SummaryGeneral Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience Must be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.Please send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      Responsibilities: Working closely with project engineers on equipment design, layout design and piping design.Evaluating, selecting, specifying all mechanical components during design process.Creating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.Participating in design reviews and providing resource information and design input.Generating and updating detail engineering documents by using Autodesk Inventor and other 2D and 3D tools for part drawings, assembly drawings, layout drawings, bill of material and equipment manuals.Work on multiple projects and accountable for schedule on assigned projects.Qualifications: Minimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.AdvantagesCreating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.ResponsibilitiesResponsibilities: Working closely with project engineers on equipment design, layout design and piping design.Evaluating, selecting, specifying all mechanical components during design process.Creating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.Participating in design reviews and providing resource information and design input.Generating and updating detail engineering documents by using Autodesk Inventor and other 2D and 3D tools for part drawings, assembly drawings, layout drawings, bill of material and equipment manuals.Work on multiple projects and accountable for schedule on assigned projects.Qualifications: Minimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.QualificationsMinimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.SummaryResponsibilities: Working closely with project engineers on equipment design, layout design and piping design.Evaluating, selecting, specifying all mechanical components during design process.Creating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.Participating in design reviews and providing resource information and design input.Generating and updating detail engineering documents by using Autodesk Inventor and other 2D and 3D tools for part drawings, assembly drawings, layout drawings, bill of material and equipment manuals.Work on multiple projects and accountable for schedule on assigned projects.Qualifications: Minimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Responsibilities: Working closely with project engineers on equipment design, layout design and piping design.Evaluating, selecting, specifying all mechanical components during design process.Creating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.Participating in design reviews and providing resource information and design input.Generating and updating detail engineering documents by using Autodesk Inventor and other 2D and 3D tools for part drawings, assembly drawings, layout drawings, bill of material and equipment manuals.Work on multiple projects and accountable for schedule on assigned projects.Qualifications: Minimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.AdvantagesCreating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.ResponsibilitiesResponsibilities: Working closely with project engineers on equipment design, layout design and piping design.Evaluating, selecting, specifying all mechanical components during design process.Creating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.Participating in design reviews and providing resource information and design input.Generating and updating detail engineering documents by using Autodesk Inventor and other 2D and 3D tools for part drawings, assembly drawings, layout drawings, bill of material and equipment manuals.Work on multiple projects and accountable for schedule on assigned projects.Qualifications: Minimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.QualificationsMinimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.SummaryResponsibilities: Working closely with project engineers on equipment design, layout design and piping design.Evaluating, selecting, specifying all mechanical components during design process.Creating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.Participating in design reviews and providing resource information and design input.Generating and updating detail engineering documents by using Autodesk Inventor and other 2D and 3D tools for part drawings, assembly drawings, layout drawings, bill of material and equipment manuals.Work on multiple projects and accountable for schedule on assigned projects.Qualifications: Minimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Burnaby, British Columbia
      • Contract
      Are you a Senior Firmware Design Engineer looking for your next opportunity? We are working with one of our enterprise clients on a 12-month contract with renewal. If you are an embedded firmware professional with a minimum of 5 years of experience and looking to join a fast-paced team environment while working in agile, this is the opportunity for you. AdvantagesWhat’s in it for you?•As the Senior Firmware Design Engineer you will:•Get to work on an exciting new project from initial stage•Work in a positive, exciting fast paced company•Work on next generation technologies•Long term contract, with extensionResponsibilities•Implement new features or fix issues written in C for an embedded application.•Write and maintain tools in Python 3.7 to support firmware development (e.g. Pytest, code generation, SQL queries, Excel reports).•Perform manual and automated bench testing during development.•Document the design and implementation details of firmware features.•Research inverter features and technical requirements including regional grid code compliance.•Write test plans, unit tests, and integration tests from requirements using Gherkin and Python.•Work closely with a cross-functional engineering team (electrical, mechanical, manufacturing, system test, and other software teams) to refine and support delivered firmware.Qualifications•Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or Software Engineering•5+ years of hands-on experience in embedded firmware development.•3+ years of experience in C programming•5+ years of experience with RTOS constructs including threads, scheduling, synchronization, and memory management.•5+ years of experience performing low-level board debugging with oscilloscopes, DMMs, function generators, etc.•Complex state machine design and implementation (e.g. Simulink Stateflow, QP/C Framework).•5+ years of Python skills in writing automated python tests.•5+ years of embedded RTOS like μC/OS, VXWorks, Neutrino•5+ years of experience with PCB schematics and microelectronic device datasheets.•Development experience in the full product lifecycle, from development through maintenance.•Structured approach to troubleshooting and problem solving.•Strong communication and interpersonal skills with demonstrated collaborative teamwork capabilitiesBonus Qualifications•Experience with TI C2000 processor family•Industrial communications standards such as IEC61850, Modbus, LIN bus, CANbus/J1939, DNP3, or Ethernet/IP.•Test-driven development (e.g. jUnit, CppUTest, Gherkin).•Digital control of inverters or other power conversion digital control techniques•PV and Grid Tie Energy Storage system architecture / application knowledge•Industrial control and monitoring systems including SCADA and PLC.•Integrating and configuring open-sourced and closed-source packages•Object oriented C and C++ application programming in multi-threaded environments.•Signal processing and feedback control systems implementation in DSP, FPGA, or general-purpose processor.SummaryIf you are living in the Greater Vancouver area and looking for your next long term contract engagement with a top employer, this is the role for you. Reach out to Christine Stacey at:Christine.stacey@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you a Senior Firmware Design Engineer looking for your next opportunity? We are working with one of our enterprise clients on a 12-month contract with renewal. If you are an embedded firmware professional with a minimum of 5 years of experience and looking to join a fast-paced team environment while working in agile, this is the opportunity for you. AdvantagesWhat’s in it for you?•As the Senior Firmware Design Engineer you will:•Get to work on an exciting new project from initial stage•Work in a positive, exciting fast paced company•Work on next generation technologies•Long term contract, with extensionResponsibilities•Implement new features or fix issues written in C for an embedded application.•Write and maintain tools in Python 3.7 to support firmware development (e.g. Pytest, code generation, SQL queries, Excel reports).•Perform manual and automated bench testing during development.•Document the design and implementation details of firmware features.•Research inverter features and technical requirements including regional grid code compliance.•Write test plans, unit tests, and integration tests from requirements using Gherkin and Python.•Work closely with a cross-functional engineering team (electrical, mechanical, manufacturing, system test, and other software teams) to refine and support delivered firmware.Qualifications•Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or Software Engineering•5+ years of hands-on experience in embedded firmware development.•3+ years of experience in C programming•5+ years of experience with RTOS constructs including threads, scheduling, synchronization, and memory management.•5+ years of experience performing low-level board debugging with oscilloscopes, DMMs, function generators, etc.•Complex state machine design and implementation (e.g. Simulink Stateflow, QP/C Framework).•5+ years of Python skills in writing automated python tests.•5+ years of embedded RTOS like μC/OS, VXWorks, Neutrino•5+ years of experience with PCB schematics and microelectronic device datasheets.•Development experience in the full product lifecycle, from development through maintenance.•Structured approach to troubleshooting and problem solving.•Strong communication and interpersonal skills with demonstrated collaborative teamwork capabilitiesBonus Qualifications•Experience with TI C2000 processor family•Industrial communications standards such as IEC61850, Modbus, LIN bus, CANbus/J1939, DNP3, or Ethernet/IP.•Test-driven development (e.g. jUnit, CppUTest, Gherkin).•Digital control of inverters or other power conversion digital control techniques•PV and Grid Tie Energy Storage system architecture / application knowledge•Industrial control and monitoring systems including SCADA and PLC.•Integrating and configuring open-sourced and closed-source packages•Object oriented C and C++ application programming in multi-threaded environments.•Signal processing and feedback control systems implementation in DSP, FPGA, or general-purpose processor.SummaryIf you are living in the Greater Vancouver area and looking for your next long term contract engagement with a top employer, this is the role for you. Reach out to Christine Stacey at:Christine.stacey@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

    Thank you for subscribing to your personalised job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.