You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalised job alerts.

    6 jobs found for Design engineer in Ontario

    filter2
    clear all
      • North York, Ontario
      • Contract
      General Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience Must be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.Please send your resume in confidence to paul.dusome@randstad.ca AdvantagesSkills •Demonstrate specialized expertise and knowledge in the assigned field •Plan and organize activities / projects to meet section and organizational goals •Apply analytical skills •Understand and apply relevant laws and regulations •Identify and minimize risk of Health and Safety issues •Communicate in a variety of mediums •Use office technology, software and applications ResponsibilitiesGeneral Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience General Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience Must be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.Please send your resume in confidence to paul.dusome@randstad.ca Please send your resume in confidence to paul.dusome@randstad.ca QualificationsMust be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.SummaryGeneral Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience Must be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.Please send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      General Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience Must be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.Please send your resume in confidence to paul.dusome@randstad.ca AdvantagesSkills •Demonstrate specialized expertise and knowledge in the assigned field •Plan and organize activities / projects to meet section and organizational goals •Apply analytical skills •Understand and apply relevant laws and regulations •Identify and minimize risk of Health and Safety issues •Communicate in a variety of mediums •Use office technology, software and applications ResponsibilitiesGeneral Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience General Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience Must be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.Please send your resume in confidence to paul.dusome@randstad.ca Please send your resume in confidence to paul.dusome@randstad.ca QualificationsMust be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.SummaryGeneral Accountability Provides expertise in relation to civil engineering design work associated with capital works projects for new and rehabilitation of TTC's pavements, drainage, stormwater management, sewers, watermains, traffic control and staging, utilities relocation, site restoration and expansion of transit facilities; provides engineering support and guidance to relevant company staff; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO).Key Job Functions • Preparing conceptual, preliminary and final design drawings for new or existing utility routing, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. • Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. • Supporting the Senior Project Engineer/Project Manager and the Property, Planning & Development Department as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for TTC new construction and renovation projects. • Reviewing development proposals for potential impact on TTC structures, facilities and equipment. • Participating in the development/update of TTC Design Standards and specifications.• Demonstrates behaviours that support diversity, inclusion, and a respectful work and service environment that is free from discrimination and harassment. Helps to remove barriers and accommodate employees and customers (within their area of responsibility) in accordance with companies commitments and obligations under the Ontario Human Rights Code (OHRC) and Related Orders, the Accessibility for Ontarians with Disabilities Act (AODA), and TTC’s policies.• Review of development and Metrolinx submissions. Education and Experience Must be licensed as a Professional Engineer in the Province of Ontario, supported by a University Degree or College Diploma in Civil Engineering, specializing in municipal design with extensive experience in a multi-disciplinary work environment, including supporting design projects where drawings and specifications have been produced by you or under your direction and review.Please send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      Responsibilities: Working closely with project engineers on equipment design, layout design and piping design.Evaluating, selecting, specifying all mechanical components during design process.Creating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.Participating in design reviews and providing resource information and design input.Generating and updating detail engineering documents by using Autodesk Inventor and other 2D and 3D tools for part drawings, assembly drawings, layout drawings, bill of material and equipment manuals.Work on multiple projects and accountable for schedule on assigned projects.Qualifications: Minimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.AdvantagesCreating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.ResponsibilitiesResponsibilities: Working closely with project engineers on equipment design, layout design and piping design.Evaluating, selecting, specifying all mechanical components during design process.Creating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.Participating in design reviews and providing resource information and design input.Generating and updating detail engineering documents by using Autodesk Inventor and other 2D and 3D tools for part drawings, assembly drawings, layout drawings, bill of material and equipment manuals.Work on multiple projects and accountable for schedule on assigned projects.Qualifications: Minimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.QualificationsMinimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.SummaryResponsibilities: Working closely with project engineers on equipment design, layout design and piping design.Evaluating, selecting, specifying all mechanical components during design process.Creating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.Participating in design reviews and providing resource information and design input.Generating and updating detail engineering documents by using Autodesk Inventor and other 2D and 3D tools for part drawings, assembly drawings, layout drawings, bill of material and equipment manuals.Work on multiple projects and accountable for schedule on assigned projects.Qualifications: Minimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Responsibilities: Working closely with project engineers on equipment design, layout design and piping design.Evaluating, selecting, specifying all mechanical components during design process.Creating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.Participating in design reviews and providing resource information and design input.Generating and updating detail engineering documents by using Autodesk Inventor and other 2D and 3D tools for part drawings, assembly drawings, layout drawings, bill of material and equipment manuals.Work on multiple projects and accountable for schedule on assigned projects.Qualifications: Minimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.AdvantagesCreating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.ResponsibilitiesResponsibilities: Working closely with project engineers on equipment design, layout design and piping design.Evaluating, selecting, specifying all mechanical components during design process.Creating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.Participating in design reviews and providing resource information and design input.Generating and updating detail engineering documents by using Autodesk Inventor and other 2D and 3D tools for part drawings, assembly drawings, layout drawings, bill of material and equipment manuals.Work on multiple projects and accountable for schedule on assigned projects.Qualifications: Minimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.QualificationsMinimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.SummaryResponsibilities: Working closely with project engineers on equipment design, layout design and piping design.Evaluating, selecting, specifying all mechanical components during design process.Creating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.Participating in design reviews and providing resource information and design input.Generating and updating detail engineering documents by using Autodesk Inventor and other 2D and 3D tools for part drawings, assembly drawings, layout drawings, bill of material and equipment manuals.Work on multiple projects and accountable for schedule on assigned projects.Qualifications: Minimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Kanata, Ontario
      • Permanent
      Principal RTL Design Engineer***100% Remote******3 positions***Required QualificationsBS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineMinimum of 12 years of relevant design experienceExperience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC DesignWorking knowledge of digital signal processing and digital interfacesExperience leading a small project team to successfully complete ASIC Design or FPGA designBe able to work in teams and communicate clearly across various levels of management and engineersDesired QualificationsMS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineExperience with MatLAB, Mentor Graphics design tools, Synopsys or similar toolsFamiliarity with Xilinx, Altera, and/or Actel FPGA technology2+ years of experience working with Digital Signal Processing Algorithms and implementationMust be legally eligible to work in Canada to be considered (open work permit acceptable) Able to travel and work on site at Client facilities for short durations if neededAdvantagesCompetitve SalaryRemote work opportunitySigning BonusStock optionFull BenefitsResponsibilitiesPerform IP, subsystem- and/or SOC-level verification: planning; test-bench components and infrastructure, stimulus, & coverage development; environment development; root-cause debug; and coverage closure. Technically lead client engagements and/or aide Engineering Directors in assessing, sizing, & planning projects.QualificationsBS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineMinimum of 12 years of relevant design experienceExperience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC DesignWorking knowledge of digital signal processing and digital interfacesExperience leading a small project team to successfully complete ASIC Design or FPGA designBe able to work in teams and communicate clearly across various levels of management and engineersDesired QualificationsMS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineExperience with MatLAB, Mentor Graphics design tools, Synopsys or similar toolsFamiliarity with Xilinx, Altera, and/or Actel FPGA technology2+ years of experience working with Digital Signal Processing Algorithms and implementationSummaryPrincipal RTL Design Engineer***100% Remote******3 positions***Required QualificationsBS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineMinimum of 12 years of relevant design experienceExperience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC DesignWorking knowledge of digital signal processing and digital interfacesExperience leading a small project team to successfully complete ASIC Design or FPGA designBe able to work in teams and communicate clearly across various levels of management and engineersDesired QualificationsMS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineExperience with MatLAB, Mentor Graphics design tools, Synopsys or similar toolsFamiliarity with Xilinx, Altera, and/or Actel FPGA technology2+ years of experience working with Digital Signal Processing Algorithms and implementationMust be legally eligible to work in Canada to be considered (open work permit acceptable) Able to travel and work on site at Client facilities for short durations if neededRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Principal RTL Design Engineer***100% Remote******3 positions***Required QualificationsBS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineMinimum of 12 years of relevant design experienceExperience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC DesignWorking knowledge of digital signal processing and digital interfacesExperience leading a small project team to successfully complete ASIC Design or FPGA designBe able to work in teams and communicate clearly across various levels of management and engineersDesired QualificationsMS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineExperience with MatLAB, Mentor Graphics design tools, Synopsys or similar toolsFamiliarity with Xilinx, Altera, and/or Actel FPGA technology2+ years of experience working with Digital Signal Processing Algorithms and implementationMust be legally eligible to work in Canada to be considered (open work permit acceptable) Able to travel and work on site at Client facilities for short durations if neededAdvantagesCompetitve SalaryRemote work opportunitySigning BonusStock optionFull BenefitsResponsibilitiesPerform IP, subsystem- and/or SOC-level verification: planning; test-bench components and infrastructure, stimulus, & coverage development; environment development; root-cause debug; and coverage closure. Technically lead client engagements and/or aide Engineering Directors in assessing, sizing, & planning projects.QualificationsBS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineMinimum of 12 years of relevant design experienceExperience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC DesignWorking knowledge of digital signal processing and digital interfacesExperience leading a small project team to successfully complete ASIC Design or FPGA designBe able to work in teams and communicate clearly across various levels of management and engineersDesired QualificationsMS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineExperience with MatLAB, Mentor Graphics design tools, Synopsys or similar toolsFamiliarity with Xilinx, Altera, and/or Actel FPGA technology2+ years of experience working with Digital Signal Processing Algorithms and implementationSummaryPrincipal RTL Design Engineer***100% Remote******3 positions***Required QualificationsBS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineMinimum of 12 years of relevant design experienceExperience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC DesignWorking knowledge of digital signal processing and digital interfacesExperience leading a small project team to successfully complete ASIC Design or FPGA designBe able to work in teams and communicate clearly across various levels of management and engineersDesired QualificationsMS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineExperience with MatLAB, Mentor Graphics design tools, Synopsys or similar toolsFamiliarity with Xilinx, Altera, and/or Actel FPGA technology2+ years of experience working with Digital Signal Processing Algorithms and implementationMust be legally eligible to work in Canada to be considered (open work permit acceptable) Able to travel and work on site at Client facilities for short durations if neededRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Kanata, Ontario
      • Permanent
      Principal RTL Design Engineer***100% Remote******Experience with PCIe and/or Synopsis IP Design Experience***Required QualificationsBS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineMinimum of 12 years of relevant design experienceExperience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC DesignWorking knowledge of digital signal processing and digital interfacesExperience leading a small project team to successfully complete ASIC Design or FPGA designBe able to work in teams and communicate clearly across various levels of management and engineersDesired QualificationsMS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineExperience with MatLAB, Mentor Graphics design tools, Synopsys or similar toolsFamiliarity with Xilinx, Altera, and/or Actel FPGA technology2+ years of experience working with Digital Signal Processing Algorithms and implementationMust be legally eligible to work in Canada to be considered (open work permit acceptable) Able to travel and work on site at Client facilities for short durations if neededAdvantagesCompetitve SalaryRemote work opportunitySigning BonusStock optionFull BenefitsResponsibilitiesPerform IP, subsystem- and/or SOC-level verification: planning; test-bench components and infrastructure, stimulus, & coverage development; environment development; root-cause debug; and coverage closure. Technically lead client engagements and/or aide Engineering Directors in assessing, sizing, & planning projects.QualificationsBS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineMinimum of 12 years of relevant design experienceExperience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC DesignWorking knowledge of digital signal processing and digital interfacesExperience leading a small project team to successfully complete ASIC Design or FPGA designBe able to work in teams and communicate clearly across various levels of management and engineersDesired QualificationsMS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineExperience with MatLAB, Mentor Graphics design tools, Synopsys or similar toolsFamiliarity with Xilinx, Altera, and/or Actel FPGA technology2+ years of experience working with Digital Signal Processing Algorithms and implementationSummaryPrincipal RTL Design Engineer***100% Remote******3 positions***Required QualificationsBS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineMinimum of 12 years of relevant design experienceExperience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC DesignWorking knowledge of digital signal processing and digital interfacesExperience leading a small project team to successfully complete ASIC Design or FPGA designBe able to work in teams and communicate clearly across various levels of management and engineersDesired QualificationsMS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineExperience with MatLAB, Mentor Graphics design tools, Synopsys or similar toolsFamiliarity with Xilinx, Altera, and/or Actel FPGA technology2+ years of experience working with Digital Signal Processing Algorithms and implementationMust be legally eligible to work in Canada to be considered (open work permit acceptable) Able to travel and work on site at Client facilities for short durations if neededRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Principal RTL Design Engineer***100% Remote******Experience with PCIe and/or Synopsis IP Design Experience***Required QualificationsBS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineMinimum of 12 years of relevant design experienceExperience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC DesignWorking knowledge of digital signal processing and digital interfacesExperience leading a small project team to successfully complete ASIC Design or FPGA designBe able to work in teams and communicate clearly across various levels of management and engineersDesired QualificationsMS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineExperience with MatLAB, Mentor Graphics design tools, Synopsys or similar toolsFamiliarity with Xilinx, Altera, and/or Actel FPGA technology2+ years of experience working with Digital Signal Processing Algorithms and implementationMust be legally eligible to work in Canada to be considered (open work permit acceptable) Able to travel and work on site at Client facilities for short durations if neededAdvantagesCompetitve SalaryRemote work opportunitySigning BonusStock optionFull BenefitsResponsibilitiesPerform IP, subsystem- and/or SOC-level verification: planning; test-bench components and infrastructure, stimulus, & coverage development; environment development; root-cause debug; and coverage closure. Technically lead client engagements and/or aide Engineering Directors in assessing, sizing, & planning projects.QualificationsBS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineMinimum of 12 years of relevant design experienceExperience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC DesignWorking knowledge of digital signal processing and digital interfacesExperience leading a small project team to successfully complete ASIC Design or FPGA designBe able to work in teams and communicate clearly across various levels of management and engineersDesired QualificationsMS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineExperience with MatLAB, Mentor Graphics design tools, Synopsys or similar toolsFamiliarity with Xilinx, Altera, and/or Actel FPGA technology2+ years of experience working with Digital Signal Processing Algorithms and implementationSummaryPrincipal RTL Design Engineer***100% Remote******3 positions***Required QualificationsBS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineMinimum of 12 years of relevant design experienceExperience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC DesignWorking knowledge of digital signal processing and digital interfacesExperience leading a small project team to successfully complete ASIC Design or FPGA designBe able to work in teams and communicate clearly across various levels of management and engineersDesired QualificationsMS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineExperience with MatLAB, Mentor Graphics design tools, Synopsys or similar toolsFamiliarity with Xilinx, Altera, and/or Actel FPGA technology2+ years of experience working with Digital Signal Processing Algorithms and implementationMust be legally eligible to work in Canada to be considered (open work permit acceptable) Able to travel and work on site at Client facilities for short durations if neededRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Kanata, Ontario
      • Permanent
      Principal RTL Design Engineer***100% Remote******Experience with Synopsis IP, DDR, LPDDR4-5, dual power memory***Required QualificationsBS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineMinimum of 12 years of relevant design experienceExperience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC DesignWorking knowledge of digital signal processing and digital interfacesExperience leading a small project team to successfully complete ASIC Design or FPGA designBe able to work in teams and communicate clearly across various levels of management and engineersDesired QualificationsMS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineExperience with MatLAB, Mentor Graphics design tools, Synopsys or similar toolsFamiliarity with Xilinx, Altera, and/or Actel FPGA technology2+ years of experience working with Digital Signal Processing Algorithms and implementationMust be legally eligible to work in Canada to be considered (open work permit acceptable) Able to travel and work on site at Client facilities for short durations if neededAdvantagesCompetitve SalaryRemote work opportunitySigning BonusStock optionFull BenefitsResponsibilitiesPerform IP, subsystem- and/or SOC-level verification: planning; test-bench components and infrastructure, stimulus, & coverage development; environment development; root-cause debug; and coverage closure. Technically lead client engagements and/or aide Engineering Directors in assessing, sizing, & planning projects.QualificationsBS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineMinimum of 12 years of relevant design experienceExperience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC DesignWorking knowledge of digital signal processing and digital interfacesExperience leading a small project team to successfully complete ASIC Design or FPGA designBe able to work in teams and communicate clearly across various levels of management and engineersDesired QualificationsMS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineExperience with MatLAB, Mentor Graphics design tools, Synopsys or similar toolsFamiliarity with Xilinx, Altera, and/or Actel FPGA technology2+ years of experience working with Digital Signal Processing Algorithms and implementationSummaryPrincipal RTL Design Engineer***100% Remote******3 positions***Required QualificationsBS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineMinimum of 12 years of relevant design experienceExperience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC DesignWorking knowledge of digital signal processing and digital interfacesExperience leading a small project team to successfully complete ASIC Design or FPGA designBe able to work in teams and communicate clearly across various levels of management and engineersDesired QualificationsMS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineExperience with MatLAB, Mentor Graphics design tools, Synopsys or similar toolsFamiliarity with Xilinx, Altera, and/or Actel FPGA technology2+ years of experience working with Digital Signal Processing Algorithms and implementationMust be legally eligible to work in Canada to be considered (open work permit acceptable) Able to travel and work on site at Client facilities for short durations if neededRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Principal RTL Design Engineer***100% Remote******Experience with Synopsis IP, DDR, LPDDR4-5, dual power memory***Required QualificationsBS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineMinimum of 12 years of relevant design experienceExperience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC DesignWorking knowledge of digital signal processing and digital interfacesExperience leading a small project team to successfully complete ASIC Design or FPGA designBe able to work in teams and communicate clearly across various levels of management and engineersDesired QualificationsMS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineExperience with MatLAB, Mentor Graphics design tools, Synopsys or similar toolsFamiliarity with Xilinx, Altera, and/or Actel FPGA technology2+ years of experience working with Digital Signal Processing Algorithms and implementationMust be legally eligible to work in Canada to be considered (open work permit acceptable) Able to travel and work on site at Client facilities for short durations if neededAdvantagesCompetitve SalaryRemote work opportunitySigning BonusStock optionFull BenefitsResponsibilitiesPerform IP, subsystem- and/or SOC-level verification: planning; test-bench components and infrastructure, stimulus, & coverage development; environment development; root-cause debug; and coverage closure. Technically lead client engagements and/or aide Engineering Directors in assessing, sizing, & planning projects.QualificationsBS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineMinimum of 12 years of relevant design experienceExperience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC DesignWorking knowledge of digital signal processing and digital interfacesExperience leading a small project team to successfully complete ASIC Design or FPGA designBe able to work in teams and communicate clearly across various levels of management and engineersDesired QualificationsMS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineExperience with MatLAB, Mentor Graphics design tools, Synopsys or similar toolsFamiliarity with Xilinx, Altera, and/or Actel FPGA technology2+ years of experience working with Digital Signal Processing Algorithms and implementationSummaryPrincipal RTL Design Engineer***100% Remote******3 positions***Required QualificationsBS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineMinimum of 12 years of relevant design experienceExperience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC DesignWorking knowledge of digital signal processing and digital interfacesExperience leading a small project team to successfully complete ASIC Design or FPGA designBe able to work in teams and communicate clearly across various levels of management and engineersDesired QualificationsMS in Electrical Engineering, Computer Engineering, or comparable engineering disciplineExperience with MatLAB, Mentor Graphics design tools, Synopsys or similar toolsFamiliarity with Xilinx, Altera, and/or Actel FPGA technology2+ years of experience working with Digital Signal Processing Algorithms and implementationMust be legally eligible to work in Canada to be considered (open work permit acceptable) Able to travel and work on site at Client facilities for short durations if neededRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Kitchener, Ontario
      • Permanent
      Our client in Kitchener, ON has partnered with Randstad Engineering in their search for a Mechanical Design Engineer to join their growing team! This role will include support in the design, planning, execution and delivery of design-build commercial, industrial construction projects with the Greater Toronto Area.AdvantagesThis is a permanent opportunity with a specialized ICI construction and engineering organization that is focused on positive working relationships, and a high caliber of professional service; Offering a competitive salary, bonuses,, Benefits, and paid Vacation.Responsibilities· Provide technical and administrative support through all phases of projects.· Perform field reviews and participate in construction site meetings.· Work with project team to ensure timely project completion.· Understanding of mechanical equipment and design of mechanical systems.· Review and comprehend relevant Codes and Standards and design calculations.· Prepare reports, drawings and specifications.Qualifications· Knowledge of plumbing, HVAC, fire protection, power distribution, lighting, life safety, communications, IT and security.· Graduate of a diploma program in the field of engineering or construction - P.Eng an asset but not required.· Experience with AutoCAD and Revit/BIM software.· Team player consistently able to meet deadlines, with a strong ability to prioritize.· Maintain a valid Ontario driver’s license.SummaryIf you are interested in this opportunity please email lindsay.lambert@randstad.ca with your resume and apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our client in Kitchener, ON has partnered with Randstad Engineering in their search for a Mechanical Design Engineer to join their growing team! This role will include support in the design, planning, execution and delivery of design-build commercial, industrial construction projects with the Greater Toronto Area.AdvantagesThis is a permanent opportunity with a specialized ICI construction and engineering organization that is focused on positive working relationships, and a high caliber of professional service; Offering a competitive salary, bonuses,, Benefits, and paid Vacation.Responsibilities· Provide technical and administrative support through all phases of projects.· Perform field reviews and participate in construction site meetings.· Work with project team to ensure timely project completion.· Understanding of mechanical equipment and design of mechanical systems.· Review and comprehend relevant Codes and Standards and design calculations.· Prepare reports, drawings and specifications.Qualifications· Knowledge of plumbing, HVAC, fire protection, power distribution, lighting, life safety, communications, IT and security.· Graduate of a diploma program in the field of engineering or construction - P.Eng an asset but not required.· Experience with AutoCAD and Revit/BIM software.· Team player consistently able to meet deadlines, with a strong ability to prioritize.· Maintain a valid Ontario driver’s license.SummaryIf you are interested in this opportunity please email lindsay.lambert@randstad.ca with your resume and apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

    Thank you for subscribing to your personalised job alerts.

    Explore over 6 jobs in Ontario

    It looks like you want to switch your language. This will reset your filters on your current job search.