286 jobs found for engineering

Maintenance EngineeringLondon Ontario12 month contract$24.00 – 33.50/hourPosition Description •As a member of the Integrated Product Team, your primary responsibility will be development of the Technical Manuals that are used by our customers for operation and maintenance of our vehicles.As part of our training program, we will provide vendor data, engineering drawings/models and field service inputs to help you better understand how the product is put together, or how a maintenance task should be performed. With this knowledge, you will develop instructions that are reviewed by quality and publishing experts and assembled into a final product (PDF and Interactive Electronic Manual (IETM) formats).The data that is created is also used cross-departmentally to support various Integrated Logistics Support (ILS) functions, such as determining product reliability and life cycle costs. As such, your role will involve teamwork with Design Engineering, Supply Chain Management and Sustainment Services departments, among others.AdvantagesMaintenance EngineeringLondon Ontario12 month contract$24.00 – 33.50/hourResponsibilities•Supports development and/or documentation of critical maintenance dataoAnalyze vehicle system functionality and identify probable failure modes that could impact system performance/safetyoAnalyze and document Failure Mode Effect & Criticality Analysis (FMECA) dataoSupport other departments in the creation of reliability data used for Life Cycle Cost estimates which are used fleet management decision makingoParticipating in Engineering discussions to ensure maintainability best practices are considered in the designoDetermine the tooling and skill sets required to support varying levels of maintenance and locations•Write or support clear, step-by-step maintenance instructions describing how to remove, repair and replace vehicle system components and assembliesoReferencing previously written material, engineering drawings and modelsoIdentifying tools and test equipment requiredoWorking with Illustrators to ensure written instructions include appropriate graphicsoWorking with Edit and Validation personnel to ensure final product meets customer expectationsQualificationsPosition Requirements •Completed University Degree or College Diploma in Engineering or Engineering Technology•Demonstrated experience with FMECA or Logistic Support Analysis Record (LSAR) development.•Experience with maintenance, or assembly/disassembly of electrical and mechanical systems.•Experience with Standards, Technical Writing or Illustrating.•Experience with XML, Coding or VBA/Macro development•1 to 3 years relevant experienceSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Are you an administrative assistant with experience in an engineering firm or in an engineering department?Do you want to work for a growing company with a friendly and family atmosphere?Do you live in the east of Montreal?We have a great position of administrative assistant in an engineering firm located in Anjou.AdvantagesPermanent positionSalary between 50k and 65k depending on experienceExcellent social benefitsFlexible schedule of 37.5h / weekSummer timetablePhysical activity programResponsibilities• Check and correct engineering documents, such as service offers, proposals, quotes and reports;• Layout the documents and ensure compliance with quality standards;• Ensure the updating of administrative templates;• Write various letters and official communications;• Create corporate resumes and keep them up to date;• Receive calls and welcome visitors during regular replacements of thereceptionist (breaks and vacations);• Correct and layout any other corporate document;• Prepare shipments of documents, drawings, letters, etc .;• Classify and archive documents;• Perform various administrative tasks.Qualifications• Recognized diploma in office automation or any other related discipline;• Minimum of 5 years in a role with similar responsibilities;• Impeccable written French;• Excellent knowledge of English, both oral and written;• In-depth knowledge of Word software and good knowledge of the Microsoft Office suite;• Experience in an engineering environment an asset;• Knowledge of the SharePoint platform, an asset;• Great autonomy and sense of responsibility;• Rigor and attention to detail;• Ability to manage priorities and manage several files simultaneously;• Excellent customer service skills.SummaryIf this position interests you and you have the required experience, send us your updated CV to kim.guertin@randstad.ca and jean.amirault@randstad.ca or by phone at 514.252.0099 ext. 2Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

EIT CET Utilization EngineeringDescription:Responsible for establishing policies, processes, procedures for Engineering Utilization focusing on best practices for safe installation and operation of gas piping and appliance work downstream of the gas utility customer’s meter and includes references to CSA B149.1Responsibilities• Write policies, procedures, processes using established templates, and by facilitating feedback meetings with associated stakeholders.• Follow program controls and attain approvals from all associated stakeholders prior to submitting to Content Management for Publishing• Using project management principles, evaluate and prioritize activities required to meet deliverables and milestone dates• Track, monitor and communicate document progress updates against the project plan.Scope• Processes• Procedures• Engineering Approval• Project Management• ControlsContacts/Working Relationships• Engineering Internal Departments• Field Personnel & External Contractors• Content Management Representatives• Operations Governance Representatives• Technical TrainersRequired:• EIT or CET Degree (preferably Mechanical);• Experience in the development of documentation including field work process and procedures• Technical experience related to residential/commercial natural gas pipe installation and gas-fired appliances• CSA B149.1 associated experience, policy and procedures coupled with an understanding of applicable regulatory codes and safety matters.• Able to independently and effectively manage projects with varying complexities requiring the application of engineering principles and business components.• Strong communication, customer service, inter-personal, organizational, conflict resolution and project management skills.• Able to manage and prioritize multiple deliverables at one time.Preferred:• PMP designation or associated experience is a plusPlease submit your resume in confidence to paul.dusome@randstad.caAdvantagesPreferred:• PMP designation or associated experience is a plus• EIT or CET Degree (preferably Mechanical);ResponsibilitiesEIT CET Utilization EngineeringDescription:Responsible for establishing policies, processes, procedures for Engineering Utilization focusing on best practices for safe installation and operation of gas piping and appliance work downstream of the gas utility customer’s meter and includes references to CSA B149.1Responsibilities• Write policies, procedures, processes using established templates, and by facilitating feedback meetings with associated stakeholders.• Follow program controls and attain approvals from all associated stakeholders prior to submitting to Content Management for Publishing• Using project management principles, evaluate and prioritize activities required to meet deliverables and milestone dates• Track, monitor and communicate document progress updates against the project plan.Scope• Processes• Procedures• Engineering Approval• Project Management• ControlsContacts/Working Relationships• Engineering Internal Departments• Field Personnel & External Contractors• Content Management Representatives• Operations Governance Representatives• Technical TrainersRequired:• EIT or CET Degree (preferably Mechanical);• Experience in the development of documentation including field work process and procedures• Technical experience related to residential/commercial natural gas pipe installation and gas-fired appliances• CSA B149.1 associated experience, policy and procedures coupled with an understanding of applicable regulatory codes and safety matters.• Able to independently and effectively manage projects with varying complexities requiring the application of engineering principles and business components.• Strong communication, customer service, inter-personal, organizational, conflict resolution and project management skills.• Able to manage and prioritize multiple deliverables at one time.Preferred:• PMP designation or associated experience is a plusPlease submit your resume in confidence to paul.dusome@randstad.caQualificationsRequired:• EIT or CET Degree (preferably Mechanical);• Experience in the development of documentation including field work process and procedures• Technical experience related to residential/commercial natural gas pipe installation and gas-fired appliances• CSA B149.1 associated experience, policy and procedures coupled with an understanding of applicable regulatory codes and safety matters.• Able to independently and effectively manage projects with varying complexities requiring the application of engineering principles and business components.• Strong communication, customer service, inter-personal, organizational, conflict resolution and project management skills.• Able to manage and prioritize multiple deliverables at one time.SummaryEIT CET Utilization EngineeringDescription:Responsible for establishing policies, processes, procedures for Engineering Utilization focusing on best practices for safe installation and operation of gas piping and appliance work downstream of the gas utility customer’s meter and includes references to CSA B149.1Responsibilities• Write policies, procedures, processes using established templates, and by facilitating feedback meetings with associated stakeholders.• Follow program controls and attain approvals from all associated stakeholders prior to submitting to Content Management for Publishing• Using project management principles, evaluate and prioritize activities required to meet deliverables and milestone dates• Track, monitor and communicate document progress updates against the project plan.Scope• Processes• Procedures• Engineering Approval• Project Management• ControlsContacts/Working Relationships• Engineering Internal Departments• Field Personnel & External Contractors• Content Management Representatives• Operations Governance Representatives• Technical TrainersRequired:• EIT or CET Degree (preferably Mechanical);• Experience in the development of documentation including field work process and procedures• Technical experience related to residential/commercial natural gas pipe installation and gas-fired appliances• CSA B149.1 associated experience, policy and procedures coupled with an understanding of applicable regulatory codes and safety matters.• Able to independently and effectively manage projects with varying complexities requiring the application of engineering principles and business components.• Strong communication, customer service, inter-personal, organizational, conflict resolution and project management skills.• Able to manage and prioritize multiple deliverables at one time.Preferred:• PMP designation or associated experience is a plusPlease submit your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

What about everyday life?- Participate in the design and development of structured and unstructured data acquisition solutions- Participate in the development and operationalization of advanced analytical platforms- Develop and test structured and unstructured data ingestion processes- Communicate and popularize complex technical concepts to users of analytical platforms- Work in an agile / iterative contextQualifications:- Experience in enterprise level software development and technology platform integration in critical business processes- Experience in operationalizing advanced analytics platforms with high availability requirements- Experience in advanced analytics- Advanced command of several programming languages, preferably Python, Java and C ++- Experience in developing ingestion scripts and processing big data for data valuation purposes- Experience with a variety of learning algorithms- Knowledge of tools such as Spark, Hadoop, Kafka, Shell; Devops, micro-services and APIs.Advantages______________________________________________________________________________Responsibilities______________________________________________________________________________Qualifications______________________________________________________________________________Summary______________________________________________________________________________Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Responsibilities:Provides expertise in relation to engineering work associated with the design, operations, maintenance and rehabilitation of TTC's systems and components for traction power and all types of transit structures and facilities and subway and surface structures; provides engineering support and guidance to operational maintenance staff on a 24-hour basis; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO)Establishing concepts to meet identified criteria established by user groups and architectural space planningPerforming analysis and design calculation to confirm the agreed framing concepts and determine final designs which conform to all current codes and standardsProviding sketches and marked drawings for Design Draftspersons and Engineering TechnologistsReviewing structural design drawings prepared by Design Draftspersons, Engineering Technologists or Consultants for technical content, and approving/signing sameAssisting to prepare standard drawings, and performing field reviews and shop drawing reviewsRepresenting the section on development reviewsPreparing/presenting various reports and recommendations related to the workIn-depth knowledge of Civil Engineering (Structural) principles, methods and practices for the design and construction of transit facility major structuresComprehensive working knowledge of applicable codes and standards that govern structural design for buildings and bridges (i.e. National Building Code of Canada, Canadian Highway and Bridge Design Code, CSA A23.1/2/3, CSA S-16, CSA S413, etc.;)Familiarity with complex computational tools such as STAAD PRO and S-Concrete are essentialGood working knowledge of designs in plain and reinforced concrete and structural steel, as well as exposure to the applied design of pre-stressed and post-tensioned concrete, masonry and timber structuresProficient skills in MS Office applicationsAbility to produce design sketches and use CADD software is an assetSound judgement; well-developed technical, analytical, problem solving skills; good interpersonal, verbal communication and engineering report writing skillsEducation:Civil Engineering Degree Min 5 years of experience P.Eng is requiredAutoCAD and Microstation is required.Please send your resume in confidence to paul.dusome@randstad.ca Advantages· Preparing conceptual, preliminary and final design drawings for new or existing utility services, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. · Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. · Supporting the Senior Engineer as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for companies new construction and renovation projects. · Reviewing development proposals, consultant designs and Metrolinx submissions for potential impact on companies structures and facilities for compliance with regulatory and TTC Civil design requirements. · Participating in the development/update of Design Standards, specifications, and standard drawings.ResponsibilitiesResponsibilities:Provides expertise in relation to engineering work associated with the design, operations, maintenance and rehabilitation of TTC's systems and components for traction power and all types of transit structures and facilities and subway and surface structures; provides engineering support and guidance to operational maintenance staff on a 24-hour basis; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO)Establishing concepts to meet identified criteria established by user groups and architectural space planningPerforming analysis and design calculation to confirm the agreed framing concepts and determine final designs which conform to all current codes and standardsProviding sketches and marked drawings for Design Draftspersons and Engineering TechnologistsReviewing structural design drawings prepared by Design Draftspersons, Engineering Technologists or Consultants for technical content, and approving/signing sameAssisting to prepare standard drawings, and performing field reviews and shop drawing reviewsRepresenting the section on development reviewsPreparing/presenting various reports and recommendations related to the workIn-depth knowledge of Civil Engineering (Structural) principles, methods and practices for the design and construction of transit facility major structuresComprehensive working knowledge of applicable codes and standards that govern structural design for buildings and bridges (i.e. National Building Code of Canada, Canadian Highway and Bridge Design Code, CSA A23.1/2/3, CSA S-16, CSA S413, etc.;)Familiarity with complex computational tools such as STAAD PRO and S-Concrete are essentialGood working knowledge of designs in plain and reinforced concrete and structural steel, as well as exposure to the applied design of pre-stressed and post-tensioned concrete, masonry and timber structuresProficient skills in MS Office applicationsAbility to produce design sketches and use CADD software is an assetSound judgement; well-developed technical, analytical, problem solving skills; good interpersonal, verbal communication and engineering report writing skillsEducation:Civil Engineering Degree Min 5 years of experience P.Eng is requiredAutoCAD and Microstation is required.Please send your resume in confidence to paul.dusome@randstad.ca QualificationsCivil Engineering Degree Min 5 years of experience P.Eng is requiredAutoCAD and Microstation is required.SummaryResponsibilities:Provides expertise in relation to engineering work associated with the design, operations, maintenance and rehabilitation of TTC's systems and components for traction power and all types of transit structures and facilities and subway and surface structures; provides engineering support and guidance to operational maintenance staff on a 24-hour basis; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO)Establishing concepts to meet identified criteria established by user groups and architectural space planningPerforming analysis and design calculation to confirm the agreed framing concepts and determine final designs which conform to all current codes and standardsProviding sketches and marked drawings for Design Draftspersons and Engineering TechnologistsReviewing structural design drawings prepared by Design Draftspersons, Engineering Technologists or Consultants for technical content, and approving/signing sameAssisting to prepare standard drawings, and performing field reviews and shop drawing reviewsRepresenting the section on development reviewsPreparing/presenting various reports and recommendations related to the workIn-depth knowledge of Civil Engineering (Structural) principles, methods and practices for the design and construction of transit facility major structuresComprehensive working knowledge of applicable codes and standards that govern structural design for buildings and bridges (i.e. National Building Code of Canada, Canadian Highway and Bridge Design Code, CSA A23.1/2/3, CSA S-16, CSA S413, etc.;)Familiarity with complex computational tools such as STAAD PRO and S-Concrete are essentialGood working knowledge of designs in plain and reinforced concrete and structural steel, as well as exposure to the applied design of pre-stressed and post-tensioned concrete, masonry and timber structuresProficient skills in MS Office applicationsAbility to produce design sketches and use CADD software is an assetSound judgement; well-developed technical, analytical, problem solving skills; good interpersonal, verbal communication and engineering report writing skillsEducation:Civil Engineering Degree Min 5 years of experience P.Eng is requiredAutoCAD and Microstation is required.Please send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Analyst, data engineeringDescription of the mandate- Work with Data Owners and Stewards to implement in the different environments, the data quality controls and rules that they have defined- Connect to the various banking systems via existing APIs, or by creating new APIs, to obtain the data to be checked or validated- Documentation of transformations and validations applied to dataKnowledge- Banking and Payments areaso Experience in financial transaction analysiso Knowledge of RPCFAT regulationso Experience with systems containing financial data (cards, transactions, payment data, etc.)- Developero DevOps Tools (GIT, Maven / Gradle, Jenkins, Nexus, Atlassian Jira & Confluence, Bitbucket, GitHub)o Linux and infrastructure tools (Docker, Kubernetes, Terraform)o Micro-services and API (REST, Kafka, MQ or other broker), SOA, JSONo AWS and Openshift (Docker and Kubernetes)o Good practices in software engineering (BDD, TDD, SOLID, Clean Code, DevOps)o Hands-on experience with Kafka connectors, such as MQ connectors, Elastic Search connectors, JDBC connectors, File flow connector, JMS source connectors, Tasks, Workers, converters, Transforms- Data engineeringo Datahub framework experience: Raw -? Curated -? Consumption - Strong experience in developing ingestion scripts and massive data flow.o Experience in the production and maintenance of software projects, and more specifically with regard to the big data ecosystemo Experience in “Distributed cluster-computing” (Spark, Databricks, Beam…)o Experience with the Melissa Data tool, or any other address formatting toolAsset- Knowledge of AML (Anti-Money Laundering) and KYC (Know Your Customer) principlesLanguages ​​sought: French, bilingual an asset. Please respect the template rate.Advantages____________________________________________________________________________Responsibilities____________________________________________________________________________Qualifications____________________________________________________________________________Summary____________________________________________________________________________Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

We are seeking an Engineering Manager to oversee our consulting clients electrical group. Our client is a very busy Mechanical and Electrical consulting company that has seen tremendous growth over the past few years. This opportunity would be ideal for an experienced senior electrical engineer or electrical engineering manager, looking to make a big impact with a growing consulting. Advantages-excellent compensation and benefits-partnership/equity opportunity potentialResponsibilities-In general, the manager of the electrical department would be responsible for overseeing a current team of 5 individuals.We would expect this team to continue to grow as we bring in more work with the assistance of the new department head. -Responsible for collaborating with the other partners for business development and securing additional work.-Managerial responsibilities would include project/work allocation among team, check in meetings, professional development reviews, annual reviews, recommended salary changes / promotions, etc.-Regular day to day responsibilities would include drawing reviews, report preparation, etcQualifications-Electrical Engineering Degree or Technologist Education, P. Eng highly desirable.-10 years + Engineering experience within consulting services for new buildings, retrofits and other building construction projects.SummaryIf you would like to be considered for this opportunity please forward your resume via email to Nick Paraskeva | nick.paraskeva@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

• Do you want to take on IT challenges in the area of ​​money laundering and fraud?• Want to be part of the transformation?• Do you want to work in a stimulating, constantly changing work environment?The IT Delivery group supporting the Financial Crime Fighting sector is currently looking for an analyst wishing to contribute to the evolution of processes and the application park of the sector and its business partners. This position is part of a framework of transformation of the sector, including new work practices (agility) and a variety of initiatives of all sizes.More details on the role that you could be brought to play? As a senior analyst, you will:• Participate in highly strategic initiatives for the Bank relating to the prevention of money laundering, fraud and compliance• Contribute to obtaining a cross-sectional view of the data flows required by financial crime control systems• Contribute to efforts to increase data quality, governance, availability and accessibility• Identify and document the needs in terms of data as well as the business rules to be applied to them• Understand the strategy, issues and operational reality of business sectors in order to properly guide IT teams in the development of innovative and efficient solutions• Identify and mitigate the impacts in transformation projects, current programs as well as new initiatives• Ensure the operationalization of new solutions (change management, quality assurance, process upgrades, transfer to operations)• Advise the business sectors as well as the IT department on the orientations to be taken according to the business objectives, the standards and regulations in force and the technological objectives and trends.• Contribute to strategic planning and Agile transformation of the sector• Help advance the practice of business analysis at the BankREQUIREMENTS• Minimum of 5 years experience in data analysis in the delivery of large-scale projects• Experience in delivery in Scrum Agile mode• Experience in data governance• Data modeling experience (Dimensional Model, DataVault Model)• Experience in database architecture• Ability to influence stakeholders• Knowledge of fraud and compliance areas is an asset• Great ease of communication and ability to popularize complex IT concepts• Oriented towards achieving objectives and meeting deadlines• Bilingualism (spoken / written) French and English is essential• Knowledge of SQL languagesAdvantages________________________________________________________________________________Responsibilities________________________________________________________________________________Qualifications________________________________________________________________________________Summary________________________________________________________________________________Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Our client has partnered with Randstad Engineering in the search for a Design Engineer with Refrigeration experience to join their growing team! Are you passionate about engineering customer requests? Do you enjoy designing and modifying new parts? If you love research and development, this role is for you! Advantages- Competitive compensation- Health care savings account- Competitive benefits- Profit sharing programResponsibilities- Engineering customer order: including capacity calculation, refrigeration component selection- Creating engineering bill of materials for designated product lines- Working with Manufacturing Engineering and Production Department to optimize the material usage and assembly process, and to solve any problems- Heat transfer and fluid dynamics calculation, new components and parts selection, cost optimization, new product design, preparing all drawings, setting up bills of materials- Lab tests, lab equipment selection or design and equipment set-up-Qualifications- Mechanical Engineering Degree- Extensive knowledge and experience in the use of 2-D and 3-D CAD software- Refrigeration background and or experienceSummaryApply online today! Or send your resume to Lisa Medeiros at Lisa.Medeiros@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Fiber Network Designers x 2 - Telecommunications - 12 months - KitchenerLooking two Fiber Coordinator/Planners in Kitchener to join one of Canada's largest telecommunications companies on an exciting deployment/expansion project. Individuals who have experience planning, designing, and coordinating HFC/Coax/Fiber Networks are encouraged to apply. Field survey industry experience is highly desirable as it will be a requirement for this position.AdvantagesHighly visible project working with one of Canada's largest Telecommunications Providers.Responsibilities•Management of the Rogers Fibre Network. Fibre circuit assignments, fibre records management and fibre network documentation including fibre IRU records, splice logs, fiber counts and availability, loopback, splice and coupler locations, termination cabinets and panel locations,•OTDR/CD/PMD traces, loss measurements and other fibre characterization specifications.•Provide fibre network design alternatives and assist in optimizing fibre network capital and operating costs. •Perform analysis of and recommendations for different fibre network technical options.•Prepare fibre cost estimates (FERs) and produce CAs, BOM and POs for fibre national or inter regional projects. Coordinate spending and timelines. Ensure projected overruns are escalated in timely fashion.•Joint Fibre planning and provides liaison to fiber users with Rogers Wireless and other 3rd parties for fiber allocation and IRUs.•Provide input to engineering plans for fibre network expansions/upgrades in a timely manner to allow implementation to be within specification, on time and within budget.•Assist in ensuring engineering plans meet fibre network needs in terms of reliability and capacity, and ensure the Fibre Network is built for ease of use from an operations perspective. •Assist in providing documents that assist other departments eg RFQ for implementation•Provide engineering support for the Rogers Fibre Network and the implementation of new engineering plans.•Provide engineering support for the selection of routes to ensure optimum cost effectiveness and performance, and in the preparation of construction and permit drawings and bill of materials for new plant and forced projects.•Provide engineering support for the operation, maintenance and restoration of the fibre network.•Accurately document details of Rogers Fibre Network topology.•Participate as lead for certain phases of complex fibre network projects.•Provide input for the preparation for technical presentations and proposals on the Rogers Fibre Network.•May provide input or advice related to fibre network technical issues.Qualifications•Customer Service Orientation, Teamwork and Collaboration, Adaptability and Initiative.•Three to Five years of Network engineering and Planning experience.•Experience with a major Telecom Service Provider or Cable Operator and direct involvement in building large fibre networks.•Education experience should include undergraduate university degree or College Diploma in electrical engineering, Telecoms Engineering or equivalent PE, CET , SCTE, BCE, BCT, or BTS certification/designation is definitely and asset.•Excellent organizational, written and verbal skills.•Ability to work within a dynamic team and organize time among multiple tasks.•Communicates effectively with both technical and operations management•Ability to prepare information and advise internal and external customers on proposed ideas, products or solutions. SummaryInterested applicants are encouraged to apply, those qualified will be contacted by a recruiter for the next steps. Don't delay, apply today!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Are you a skilled Electrical Engineer with experience in Power Systems?Do you have transformer design experience?Are you looking for a career path with an excellent organization?If so, this could be the opportunity for you!Reporting to the Engineering Manager, the Electrical Engineer is responsible for providing cost effective and accurate designs and manufacturing information packages to meet customer specifications for all customer transformer orders. The Engineer would be working with orders for 300 – 10000kVA up to the 45kV class, and drive transformers 6-pulse and higher.AdvantagesFull range of benefits including Group Health and Wellness, Employer Matching Pension Plan, Employee Share Ownership Program, Student Scholarships, Training and Educational Reimbursement and Employee Assistance Programs.Responsibilities• Prepare electrical designs for dry-type transformers using information from the customer order and specifications• Understand and follow the design guidelines in company policies and other related Engineering documents and implement them at minimum total cost for product• Review any special Application / Design requirements with Design Engineering Manager• Estimate the total design costs with available past data. Review and report any cost vs. price issues to Sales and the Design Engineering Manager• Work with Sales to resolve any discrepancies/clarifications with customer specifications• Where required, review with customer on clarifications, discrepancies and any special application requirements• Review customer comments (if any) on approved drawings• Support Purchasing in finalizing specification of purchased special components with supplier• Communicate the final details of the design to the Mechanical Designers• Review and solve any electrical design issues raised by plant employees or in the field by the customer, and use this feedback for preventing errors in the future• Participate in cost reduction activities through design for specifications and through standardization• Active participation in continuous improvement projectsQualifications• Degree/Diploma in Electrical Engineering required• Professional Engineering license preferred• Must have at least 3 years of direct experience designing either dry-type or oil-filled transformers• Strong capability in electrical engineering fundamentals, calculations and applications• Displays excellent communication, teamwork, innovation, and analytical skillsSummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positionsRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

We are looking for a Jr/Intermediate Data Analytics Application Developer for a high-profile data analytics/management consulting firm.Key Skills include Python, C/C++, Java, HTML/CSS/JS. You don't need to have strong work experience, but a strong academic background in the field of any types of Analytics, software development, engineering, financial modelling is highly desired. Experience with Data Engineering (Automation, ETL, Data Analytics) is also a big plus.AdvantagesOpportunity to learn state-of-the-art data engineering/data analytics technologiesGREAT TEAM ENERGY! - A great workplace with collaborative talented peopleOpportunity for rapid promotionCompetitive Salary that is higher than the market rate for the same positionsResponsibilitiesResearch related programming & web-based development Data collectionETLAutomationIntegrating inputs from various back-end services Using various programming languages to analyze complex market dataFull-stack development of web-based applicationsQualificationsAn undergraduate degree in any field - any types of Analytics, software development, engineering, financial modelingExperience with Data Engineering (Automation, ETL, Data Analytics) is also a big plus.Strong communication skills (written and oral) SummaryWe are looking for a Jr/Intermediate Data Analytics Software Developer for a high-profile data analytics/management consulting firm.Key Skills include Python, C/C++, Java, HTML/CSS/JS. You don't need to have strong work experience, but a strong academic background.Experience with Data Engineering (Automation, ETL, Data Analytics) is also a big plus.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Diagnostics EngineeringLondon Ontario12 month contract$24.00 – 33.50/hour•Supports development and/or documentation of critical maintenance dataoAnalysis of electrical, hydraulic and mechanical system functionality to determine most efficient troubleshooting methodology (perform Fault Tree Analysis and/or Failure Mode Effect Analysis of system/component)oSupport development of fault insertion tools and non-destructive faults for use in validation of troubleshooting proceduresoMaintain the configuration and revision of the data in the database as well as all supporting documentsoProactively support and communicate with other Engineering teams and departmentsoAssist with aftermarket support requestsoAttend fit-ups as requiredAdvantagesDiagnostics EngineeringLondon Ontario12 month contract$24.00 – 33.50/hourResponsibilities•Write or support clear, step-by-step fault location instructions describing how to determine which vehicle system components or assemblies require repair or replacementoReferencing previously written material, engineering drawings and models, schematicsoWorking with Illustrators to ensure written instructions include appropriate graphicsoWorking with Edit and Validation personnel to ensure final product meets customer expectationsQualificationsPosition Requirements •Completed University Degree or College Diploma in a technical discipline (Engineering or Engineering Technology)•Logistic Support Analysis Record (LSAR) development•Experience with XML, Coding or VBA/Macro development•Experience with maintenance, troubleshooting, or assembly/disassembly of electrical and mechanical systems•Experience with Standards, Technical Writing or Illustrating.•1 to 3 years relevant experienceSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

LOCATION: 500 Consumer Rd, North YorkDuties & Responsibilities:Provide hydraulic modelling support using the Synergi software application.MUST HAVE qualifications:Related University Engineering Degree or CET ProgramNICE TO HAVE qualifications:Experience with Synergi software or similarWorking Conditions:- Office environment - working from home to start - after COVID restrictions are lifted and offices re-open worker will be onsite at VPCAdditional details / description:Are you looking to build relationships and make an impact at Enbridge from the ground up? Join us as an Engineer-in-Training, Distribution Optimization Engineering to become part of a dynamic team responsible for planning and analyzing Enbridge Gas Inc’s distribution pipeline systems.You will have the opportunity to interact with many groups across the organization, support innovative, high profile projects and develop leadership competencies. If you are a problem solver with strong communication skills. Apply today!What You Will Do: •Overall responsibility to create update and maintain hydraulic network system models for our gas distribution client.•Overall responsibility to examine, design and analyze the effects of various system alterations on system integrity and reliability, and propose new or altered infrastructure, such as reinforcements, as required.•Provide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.•Identify changes in customer load profiles and assist in incorporating these changes into the load gathering program and network analysis design standards, thereby ensuring accuracy of the annual simulation and forecast analysis•Analyze and forecast the short and long-range distribution system operating and infrastructure requirements under varying conditions for all regions within the EGI distribution system.•Conduct network impact reports and contingency plans as required ensuring system reliability and minimizing system disruptions.•Provide consultation to other internal groups, such as Network Operations, Gas Control, AR&I, Construction, Engineering, Integrity, Key Accounts, etc.Who You Are:You have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.Please send your resume in confidence to paul.dusome@randstad.caAdvantagesProvide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.ResponsibilitiesLOCATION: 500 Consumer Rd, North YorkDuties & Responsibilities:Provide hydraulic modelling support using the Synergi software application.MUST HAVE qualifications:Related University Engineering Degree or CET ProgramNICE TO HAVE qualifications:Experience with Synergi software or similarWorking Conditions:- Office environment - working from home to start - after COVID restrictions are lifted and offices re-open worker will be onsite at VPCAdditional details / description:Are you looking to build relationships and make an impact at Enbridge from the ground up? Join us as an Engineer-in-Training, Distribution Optimization Engineering to become part of a dynamic team responsible for planning and analyzing Enbridge Gas Inc’s distribution pipeline systems.You will have the opportunity to interact with many groups across the organization, support innovative, high profile projects and develop leadership competencies. If you are a problem solver with strong communication skills. Apply today!What You Will Do: •Overall responsibility to create update and maintain hydraulic network system models for our gas distribution client.•Overall responsibility to examine, design and analyze the effects of various system alterations on system integrity and reliability, and propose new or altered infrastructure, such as reinforcements, as required.•Provide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.•Identify changes in customer load profiles and assist in incorporating these changes into the load gathering program and network analysis design standards, thereby ensuring accuracy of the annual simulation and forecast analysis•Analyze and forecast the short and long-range distribution system operating and infrastructure requirements under varying conditions for all regions within the EGI distribution system.•Conduct network impact reports and contingency plans as required ensuring system reliability and minimizing system disruptions.•Provide consultation to other internal groups, such as Network Operations, Gas Control, AR&I, Construction, Engineering, Integrity, Key Accounts, etc.Who You Are:You have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.Please send your resume in confidence to paul.dusome@randstad.caQualificationsYou have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.SummaryLOCATION: 500 Consumer Rd, North YorkDuties & Responsibilities:Provide hydraulic modelling support using the Synergi software application.MUST HAVE qualifications:Related University Engineering Degree or CET ProgramNICE TO HAVE qualifications:Experience with Synergi software or similarWorking Conditions:- Office environment - working from home to start - after COVID restrictions are lifted and offices re-open worker will be onsite at VPCAdditional details / description:Are you looking to build relationships and make an impact at Enbridge from the ground up? Join us as an Engineer-in-Training, Distribution Optimization Engineering to become part of a dynamic team responsible for planning and analyzing Enbridge Gas Inc’s distribution pipeline systems.You will have the opportunity to interact with many groups across the organization, support innovative, high profile projects and develop leadership competencies. If you are a problem solver with strong communication skills. Apply today!What You Will Do: •Overall responsibility to create update and maintain hydraulic network system models for our gas distribution client.•Overall responsibility to examine, design and analyze the effects of various system alterations on system integrity and reliability, and propose new or altered infrastructure, such as reinforcements, as required.•Provide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.•Identify changes in customer load profiles and assist in incorporating these changes into the load gathering program and network analysis design standards, thereby ensuring accuracy of the annual simulation and forecast analysis•Analyze and forecast the short and long-range distribution system operating and infrastructure requirements under varying conditions for all regions within the EGI distribution system.•Conduct network impact reports and contingency plans as required ensuring system reliability and minimizing system disruptions.•Provide consultation to other internal groups, such as Network Operations, Gas Control, AR&I, Construction, Engineering, Integrity, Key Accounts, etc.Who You Are:You have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

LOCATION: 500 Consumer Rd, North YorkDuties & Responsibilities:Provide hydraulic modelling support using the Synergi software application.MUST HAVE qualifications:Related University Engineering Degree or CET ProgramNICE TO HAVE qualifications:Experience with Synergi software or similarWorking Conditions:- Office environment - working from home to start - after COVID restrictions are lifted and offices re-open worker will be onsite at VPCAdditional details / description:Are you looking to build relationships and make an impact at Enbridge from the ground up? Join us as an Engineer-in-Training, Distribution Optimization Engineering to become part of a dynamic team responsible for planning and analyzing Enbridge Gas Inc’s distribution pipeline systems.You will have the opportunity to interact with many groups across the organization, support innovative, high profile projects and develop leadership competencies. If you are a problem solver with strong communication skills. What You Will Do: •Overall responsibility to create update and maintain hydraulic network system models for our gas distribution client.•Overall responsibility to examine, design and analyze the effects of various system alterations on system integrity and reliability, and propose new or altered infrastructure, such as reinforcements, as required.•Provide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.•Identify changes in customer load profiles and assist in incorporating these changes into the load gathering program and network analysis design standards, thereby ensuring accuracy of the annual simulation and forecast analysis•Analyze and forecast the short and long-range distribution system operating and infrastructure requirements under varying conditions for all regions within the EGI distribution system.•Conduct network impact reports and contingency plans as required ensuring system reliability and minimizing system disruptions.•Provide consultation to other internal groups, such as Network Operations, Gas Control, AR&I, Construction, Engineering, Integrity, Key Accounts, etc.Who You Are:You have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.Please send your resume in confidence to paul.dusome@randstad.caAdvantagesProvide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.ResponsibilitiesLOCATION: 500 Consumer Rd, North YorkDuties & Responsibilities:Provide hydraulic modelling support using the Synergi software application.MUST HAVE qualifications:Related University Engineering Degree or CET ProgramNICE TO HAVE qualifications:Experience with Synergi software or similarWorking Conditions:- Office environment - working from home to start - after COVID restrictions are lifted and offices re-open worker will be onsite at VPCAdditional details / description:Are you looking to build relationships and make an impact at Enbridge from the ground up? Join us as an Engineer-in-Training, Distribution Optimization Engineering to become part of a dynamic team responsible for planning and analyzing Enbridge Gas Inc’s distribution pipeline systems.You will have the opportunity to interact with many groups across the organization, support innovative, high profile projects and develop leadership competencies. If you are a problem solver with strong communication skills. What You Will Do: •Overall responsibility to create update and maintain hydraulic network system models for our gas distribution client.•Overall responsibility to examine, design and analyze the effects of various system alterations on system integrity and reliability, and propose new or altered infrastructure, such as reinforcements, as required.•Provide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.•Identify changes in customer load profiles and assist in incorporating these changes into the load gathering program and network analysis design standards, thereby ensuring accuracy of the annual simulation and forecast analysis•Analyze and forecast the short and long-range distribution system operating and infrastructure requirements under varying conditions for all regions within the EGI distribution system.•Conduct network impact reports and contingency plans as required ensuring system reliability and minimizing system disruptions.•Provide consultation to other internal groups, such as Network Operations, Gas Control, AR&I, Construction, Engineering, Integrity, Key Accounts, etc.Who You Are:You have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.Please send your resume in confidence to paul.dusome@randstad.caQualificationsYou have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.SummaryLOCATION: 500 Consumer Rd, North YorkDuties & Responsibilities:Provide hydraulic modelling support using the Synergi software application.MUST HAVE qualifications:Related University Engineering Degree or CET ProgramNICE TO HAVE qualifications:Experience with Synergi software or similarWorking Conditions:- Office environment - working from home to start - after COVID restrictions are lifted and offices re-open worker will be onsite at VPCAdditional details / description:Are you looking to build relationships and make an impact at Enbridge from the ground up? Join us as an Engineer-in-Training, Distribution Optimization Engineering to become part of a dynamic team responsible for planning and analyzing Enbridge Gas Inc’s distribution pipeline systems.You will have the opportunity to interact with many groups across the organization, support innovative, high profile projects and develop leadership competencies. If you are a problem solver with strong communication skills. What You Will Do: •Overall responsibility to create update and maintain hydraulic network system models for our gas distribution client.•Overall responsibility to examine, design and analyze the effects of various system alterations on system integrity and reliability, and propose new or altered infrastructure, such as reinforcements, as required.•Provide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.•Identify changes in customer load profiles and assist in incorporating these changes into the load gathering program and network analysis design standards, thereby ensuring accuracy of the annual simulation and forecast analysis•Analyze and forecast the short and long-range distribution system operating and infrastructure requirements under varying conditions for all regions within the EGI distribution system.•Conduct network impact reports and contingency plans as required ensuring system reliability and minimizing system disruptions.•Provide consultation to other internal groups, such as Network Operations, Gas Control, AR&I, Construction, Engineering, Integrity, Key Accounts, etc.Who You Are:You have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

We are seeking a Manufacturing Test Engineer for a well established high tech manufacturing client of ours in the Vancouver area. Reporting to the Vice President, Manufacturing the Manufacturing Test Engineer will focus on the delivery and support of robust, manufacturable products for volume manufacturing, and the delivery of these products. Key areas of responsibility include interfacing between product development and manufacturing for new product development and new product introduction, with focus on design for testability, implementing and maintaining production tests.Advantages-Excellent compensation -Comprehensive benefits package-Work culture that values work/life balanceResponsibilities• Ensure design for testability is performed on all products released for manufacture• Process engineering changes, including interfacing with engineering and manufacturing to ensure completeness of the changes, and for follow through of implementation of the changes with respect to test processes both internally, and with external partners• Coordinate with electronics manufacturing service providers and contract manufacturers to resolve technical issues with Tantalus products• Support remote manufacturing for product test related issues, and interface with the manufacturing test engineering, manufacturing engineering and process engineering providers located in SE Asia• Evaluate alternate vendors for manufacturing services quality and commercial appropriateness • Develop and maintain relationships with key material vendors and manufacturing service providers• Assist and coordinate manufacturing quality audits, review and evaluate product quality of materials and products contracted , including incoming and/or outgoing quality audits of products, as needed• Assist in the development of manufacturing test specifications, and the implementation of manufacturing tests as required• Develop and maintain manufacturing test systems and software as required• Provide leadership to junior engineering, technologists, technicians, operations staff and coop/interns working in the manufacturing team• Assist with day- to- day coordination of the Manufacturing Team activities• Provide direct day-to-day guidance to members of the manufacturing team as needed• Travel as needed, 1 or 2 times per year to SE Asia and other product development sitesQualifications• Diploma or B.A.Sc. in Electrical/Electronic Engineering or Mechanical Engineering or equivalent• Eligible to register with EGBC as an EIT, if not already registered• Minimum 5 years related professional level work experience in front line manufacturing engineering roles with electronics manufacturing or similar technology industry• Sound understanding of electronics manufacturing processes• A solid foundation in math and physics and a commitment to design from first principles• Strong ability to interpret hardware designs, including reading electronic schematics and interpreting Bill of Materials• Experience with writing software in C, C++, C#, LabView, TestStand or Python• Experience using Microsoft Office products, installation of Microsoft operating systems and PC hardware configuration• Experience with Linux installation and configuration• Experience with both board level and system/box level manufacturing and test methodologies• Experience with data collection methodologies, and data analysis for monitoring production yields and failures (statistical process control)• Experience with change control processesExperience Desired:• Experience with RF products• Experience with relational database basics, including configuration and maintenance• Experience with manufacturing test strategies and implementations• Experience with engineering and manufacturing systems (e.g. BOM management, schematic capture)• Experience with SQL database queries and report generationSummaryIf you would like to be considered for this opportunity, please forward your resume via email to Nick Paraskeva | nick.paraskeva@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

We are seeking an experienced NPI Project Engineer for a well established high tech manufacturing client of ours in the Victoria area. The NPI Project Engineer will play a key role in interfacing between our clients customers and the Mechanical Engineering team to ensure successful New Product Introduction.Advantages-Excellent compensation and benefits-Cutting edge/industry innovator companyResponsibilities-Leading the NPI and development process.-Collaboration with customer OEMs to clarify interfaces and constraints-Ensuring the design meets the target module requirements and specifications, identifying and resolving gaps and issues, should they exist.-Collaboration with internal cross-functional teams including electrical, software, firmware, manufacturing, test.-Supporting the engineering activities related existing designs and transfer to manufacturing.-Performing design activities that includes mechanical analysis, manufacturing and assembly tolerances, 3D CAD modelling (using Solid Works within EPDM), drawing creation and modification.-Selection of the appropriate materials, sources of supply, CAD data and specifications, that enable procurement of components in the product assembly.-Completion of engineering documentation to support assigned projects as well as executing engineering change orders as required (DWG and BOM changes, associated documentation, MFG process updates).-Perform engineering analysis and establish environmental test plans to demonstrate product designs meet mechanical, thermal, and related performance requirements.-Support manufacturing engineers in the development of tooling and processes to manufacture module designs.-Assist the manufacturing and engineering teams in achieving cost-reduction goals on key productsQualifications-Bachelor’s degree or technical diploma in mechanical engineering, mechatronics or an equivalent degree of education & combined work experience.-Minimum of 7+ years’ experience in design and manufacturing of electromechanical components and assemblies in low-to-mid volume products.-Familiarity with new product introduction (NPI) in medical devices or another regulated industry (military, aerospace, automotive, telecom, etc.).-Strong verbal and written communication skills and demonstrated ability to communicate technical concepts and requirements clearly.-Ability to thrive in environment of ambiguity and uncertainty and able to rapidly understand new technologies and incorporate on-the-fly change of plans.-Proficiency with Solid works or similar 3D CAD programs.-Extensive experience in electromechanical packaging of printed circuit board products.-Demonstrated experience of design-for-manufacturing concepts.-Familiarity with geometric dimensioning and tolerancing (GD&T).-Proficiency with MS Office programs.-Experience in thermal simulation & design for electronic assemblies is considered an asset.SummaryIf you would like to be considered for this opportunity please forward your resume via email to Nick Paraskeva | nick.paraskeva@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Provisioning/Parts Content Developer London Ontario12 month contract$24.00 – 33.50/hour Position Description •Develop/write recommended repair parts catalogues as part of the overall development of technical manuals for vehicle systems and sub-systems•Document the physical breakdown of a vehicle, assembly and/or subsystem in accordance with applicable standards and approved customer maintenance concept•Referencing previously written material, engineering drawings, models and parts information from Logistic Support Analysis Record database•Working with Illustrators to ensure written instructions include appropriate graphics•Working with Edit and Validation personnel to ensure final product meets customer expectationsAdvantagesProvisioning/Parts Content Developer London Ontario12 month contract$24.00 – 33.50/hourResponsibilities Position Description •Develop/write recommended repair parts catalogues as part of the overall development of technical manuals for vehicle systems and sub-systems•Document the physical breakdown of a vehicle, assembly and/or subsystem in accordance with applicable standards and approved customer maintenance concept•Referencing previously written material, engineering drawings, models and parts information from Logistic Support Analysis Record database•Working with Illustrators to ensure written instructions include appropriate graphics•Working with Edit and Validation personnel to ensure final product meets customer expectationsQualifications Position Requirements •Completed University Degree or College Diploma specific to Engineering or Engineering Technology•Experience with HTML, XML, Coding, VBA/Macro development•Experience with maintenance, or assembly/disassembly of electrical and mechanical systems.•Experience with Standards, Technical Writing or Illustrating.•1 to 3 years relevant experienceSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Validation Verification Engineer London Ontario12 month contract$24.00 – 33.00/hourKey Job Elements•Support the validation and verification activities at vehicle level, which consist of;•Coordinate and track test assets•Coordinate and track testing activities•Support the development of test plans and reports (including sign off process)Advantages•Prepare and hold regular verification/validation status meetings•Attend status and working meetings with external customer related to vehicle level verification/validation effortResponsibilities Position Requirements Required Qualifications:•University Degree in Engineering•2 years’ experience in Project Engineering or Systems Engineering•Demonstrated ability to develop / manage budgets and schedules•Strong technical and analytical ability•Basic knowledge of Earned value management system•Excellent communication and strong interpersonal skillsQualificationsPreferred Qualification: •Strong knowledge of cross-departmental procedures / practices•Strong knowledge of design practices•Basic understanding of system verification processes.•Working knowledge of Systems Engineering FundamentalsSummaryQuestions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Our client in London has partnered with Randstad Engineering in their search for a Civil Project Manager (Land Development) to join their growing team! This role will include support in identifying business development opportunities, understanding industry and development in the Region of Waterloo, leading proposal efforts including completing project scoping and RFP assessments.AdvantagesThis is a permanent opportunity with a full service engineering organization that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, performance bonuses, RRSP Matching Program, Benefits, Vacation and Flexibility.Responsibilities•Manage day-to-day client interactions, communicate effectively with clients and internal/external project teams, and continually seek opportunities to increase client satisfaction;•Managing project execution by providing direction to the project team, appropriately scheduling time and acting as main point of contact between internal and external project teams;•Responsible for the planning, executing and delivery of land and site development projects, ensuring the project is within budget and on schedule while managing the clients’ expectations;•Procure new projects and clients by identifying business development opportunities, understanding industry and development in the City of London and the London area, leading proposal efforts including completing project scoping and RFP assessments;•Managing project financials including invoicing, progress payment certificates, collecting accounts receivables and managing project budgets Qualifications• Civil Engineering Degree• 5 years of experience in a similar role• P.Eng or C.E.T Designation• Strong knowledge of Subdivision and Site Plan review process• Strong technical report writing skills, as well as written and verbal communication skills• Working knowledge of MS Office software, including Outlook, Excel and WordSummaryIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Our client in the Vaughan area has partnered with Randstad Engineering in their search for a Sr CNC Programmer. Job Title: Senior CNC Programmer / Operator - Type - Lathe Programming using MastercamIndustry - Automotive Parts Manufacturer Shift - Day ShiftFull Time permanentIf you are interested in this opportunity, apply today online or send your resume directly to ankur.vaid@randstad.ca. AdvantagesThis is a permanent opportunity, with a competitive compensation package in a thriving environment.ResponsibilitiesJOB DESCRIPTIONManufacture tooling and prototype components as directed by blueprint or instructions using CNC equipmentVerify that tooling and prototype components are to blueprint specificationsTakes all required safety precautions when working; advises people nearby of sameManufacture advanced/complex tooling and prototype componentsQualificationsQUALIFICATIONSMinimum seven years experience programming, and operating CNC Lathes. using MastercamCAD/CAM designing (Delcam and SolidWorks software) experience is an asset.Must be able to do own set-ups and read blueprintsMust have excellent mathematical skillsMust be able to work independentlyAble to fulfill physical requirements as requiredSummaryIf you are interested in this opportunity, apply today online or send your resume directly to ankur.vaid@randstad.ca. Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Our client has partnered with Randstad Engineering in the search for a Junior Structural Drafter to join their growing team! Are you looking for a challenging role where you will have the opportunity to have huge impact on an industry leader? Are you a motivated individual with a strong desire to succeed? This role is for you! We are looking for a Junior Structural Drafter to join the team in the Hamilton area.Advantages- Competitive compensation- Competitive benefits- Annual bonus- Global opportunities for growth and developmentResponsibilities•Prepare and modify customer fabrication drawings - Prepare complex drawings - Compose cladding and flashing drawings - Create fabrication and product drawings- Prepare reports and bills of materials- Communicate with customers regarding details, pricing and scheduling - Plan, coordinate and monitor project through completion- Ensure deadlines are met Qualifications•College diploma in Civil, Construction or Architectural Technician program- 2 years drafting experience in structural steel buildings- Ability to read and understand architectural drawings - Knowledge of estimating steel construction- Experience with AutoCAD- Experience with TEKLA or other 3D Design programs- Understanding of steel building construction processes- Must be able to interpret project specifications and drawingsSummaryApply online today! Or send your resume to Lisa Medeiros at Lisa.Medeiros@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

We are seeking an experienced Manufacturing Manager for a well established industrial machinery client of ours in the Vancouver area. The Manager will oversee the daily operations of manufacturing as well as collaborating with other departments related to manufacturing. You will be involved in all aspects of the manufacturing cycle, including planning, coordinating, and directing production related activities, controlling documentation and operations manuals. Advantages-Excellent Compensation and Benefits-Well established company with strong industry reputationResponsibilities-Project schedule management and control for all capital works including planning, sequencing, estimating, and developing-Present regularly to supervisory team and management team on status of department-Spearhead safety improvement initiatives with the objective of improving overall safety culture and eliminating workplace injuries. Chair Joint Health & Safety Committee and lead monthly meetings-Project risk management and resource management, including estimating resources based on workload, acquiring as required, developing and managing.-Being the principal management liaison with the Shop Committee and lead Shop Employee Contract Negotiations-Resolve personnel issues and take appropriate corrective actions where necessary. Manage employee performance and recruit new shop employees in collaboration with Human Resources.-Lead continuous improvement operations using Lean, Six Sigma, and other methods Liaise with Property Management (building owners) and handle any property issues (HVAC, alarm, security, industrial hazardous material removal, flooding) and develop long-term planning for facility requirements-Be in charge of production quality to meet the required standards, and implement uniform global manufacturing practices-Develop and monitor KPI’s locally based on expectations and global strategy objectives (i.e. OTIF, OEE, LTIF). Liaise directly with counterparts in other production facilities to support our clients global strategy-Embrace the opportunities of digitalization as a platform for continuous productivity improvement-Provide ERP, APS and operational expertise, assisting other departments (engineering, manufacturing, sales, procurement, project management, logistics) in problem solving-Make strategic decisions to achieve financial targets (budgets, POC estimates, etc). Review Annual departmental budget for upcoming year and make recommendations-Identify, plan and execute long term investment plans to ensure continuityQualifications-Degree in Engineering or Manufacturing, or equivalent experience.-Minimum 10 years of experience in an industrial equipment environment -Well versed in process improvement and LEAN manufacturing techniques-Mechanical aptitude with an ability to troubleshoot issues-Ability to travel to customer sites locally throughout Canada and the US-Must possess a valid passport and driver's licenseSummaryIf you would like to be considered for this opportunity please forward your resume via email to Nick Paraskeva | nick.paraskeva@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Job DescriptionEngagement and Measurement Specialist Edmonton, Calgary, or TorontoContractJob Reference No.: ENBJP00013623Our major client, an energy transportation company with a focus on transportation, distribution, and energy generation is urgently looking to fill an Engagement and Measurement Specialist who will be responsible for strategic planning and the development and execution of a wide range of activities that inform and involve internal and external stakeholders for awareness and understanding of the Unify Program.Specific AccountabilitiesEngagement & Measurement:• Drive planning and strategizing for campaign execution including content, content schedule, platforms and measurements• Support the delivery of effective events including roadshows, showcases, lunch & learns, change agent network meetings, and other informational gatherings• Measure the organization’s change progress throughout the projectCommunications:• Develop enterprise, and program communications and strategies; create communication plans and execute or deliver tactics; advise/support senior leaders and teams in successful planning and delivery of communications; steward effective, accurate program and enterprise SharePoint sites, content, apps, presentations and other materialsChange Management:• Collaborate on the cross functional execution of overall change and business readiness activities required for the enterprise over the phases of the Unify Program deployment• Execution of the culture and behavior strategy to support the sustainment and reinforcement of system and process changes introduced by the Unify ProgramScope• This position has significant influence on how the Unify Program is perceived by enterprise leaders, enterprise business partners, and the broad business, and how effectively these stakeholder groups engage with the Unify program.Supports Unify Program team and Change Lead for transformational enterprise wide initiative – with focus on leadership engagement and broad business campaigns.• This role is highly visible and requires fast-paced performance, often under p essure. Solid project and program management skills are required.• The role is expected to demonstrate leadership by influencing actions and behaviors.• The position demands the management of extensive internal consultation, development of options and recommendations for senior leaders.Contacts - Working relationships• ERP Leaders• Enterprise Vice Presidents• ERP Team Members, Business Unit Subject Matter Experts, Business Unit Business Readiness Agents• OCM Functional Specialists and User Access Analyst• OCM Communications and Engagement/OCM Training• Public Affairs, Communications, and Sustainment Business Partner• External Consulting PartnersKnowledge, skill and accountabilitiesRequired:• Related university degree and/or professional designation (i.e. Business, Organizational Behaviour, Psychology, Marketing, Communications, or Education)• 7 plus years of progressively responsible and related experience• Midstream sector knowledge - Understands the business units and central function processes, issues and challenges• Strategic thinker, experienced in project management, stakeholder management and change management execution• Must be a team player and able to work collaboratively with OCM counterparts, Functional Change Management Specialists and Business Units Change Consultants• Self-starter with ability to work independently while focused on attention to high quality work• Exceptional people skills to engage and motivate individual contributors to senior leadership• Ability to flex well between project management and organizational change management, preferably with experience in systems and process changes• Outstanding communicator with excellent English written grammar, acute attention to detail, strong problem-solving ability and flexibility are required• Advanced knowledge of Microsoft Office suite is a critical requirement, particularly Microsoft Project, PowerBI, SharePoint Administration, PowerPoint, and Excel• Communication and Presentation Skills –will need strong communication skills to be able to get complex ideas across in an easy-to-understand fashionPreferred:• PROSCI, PMP• Broad business experience focused on large and/or transformational change is an asset• Experience in design, brand development and project management• Experience with Adobe Suite and/or graphic designNormal office working conditions• Stress levels can be above normal as the work is highly visible. Numerous, often competing interests must be managed concurrently whilst providing strategic and operational oversight and influencing• Travel to other Company locations may be requiredIf this sounds like the right role for you and you are confident at what you bring to the table, apply now!Although we appreciate all applications, only those that meet the minimum job qualifications will be considered for this role. We thank you all for your interest.Not the right fit this time? Follow us on our career’s social media pages!Interested candidate is also encouraged to submit a copy of the updated resume to Resource Manager, Geraldine Valiarayil at geraldine.valiarayil@randstad.ca, with the Job Order Number / Position Name in the subject line.AdvantagesOpportunity to work with an organization that values its employees and works with industry experts.ResponsibilitiesSpecific AccountabilitiesEngagement & Measurement:• Drive planning and strategizing for campaign execution including content, content schedule, platforms and measurements• Support the delivery of effective events including roadshows, showcases, lunch & learns, change agent network meetings, and other informational gatherings• Measure the organization’s change progress throughout the projectCommunications:• Develop enterprise, and program communications and strategies; create communication plans and execute or deliver tactics; advise/support senior leaders and teams in successful planning and delivery of communications; steward effective, accurate program and enterprise SharePoint sites, content, apps, presentations and other materialsChange Management:• Collaborate on the cross functional execution of overall change and business readiness activities required for the enterprise over the phases of the Unify Program deployment• Execution of the culture and behavior strategy to support the sustainment and reinforcement of system and process changes introduced by the Unify ProgramQualificationsRequired:• Related university degree and/or professional designation (i.e. Business, Organizational Behaviour, Psychology, Marketing, Communications, or Education)• 7 plus years of progressively responsible and related experience• Midstream sector knowledge - Understands the business units and central function processes, issues and challenges• Strategic thinker, experienced in project management, stakeholder management and change management execution• Must be a team player and able to work collaboratively with OCM counterparts, Functional Change Management Specialists and Business Units Change Consultants• Self-starter with ability to work independently while focused on attention to high quality work• Exceptional people skills to engage and motivate individual contributors to senior leadership• Ability to flex well between project management and organizational change management, preferably with experience in systems and process changes• Outstanding communicator with excellent English written grammar, acute attention to detail, strong problem-solving ability and flexibility are required• Advanced knowledge of Microsoft Office suite is a critical requirement, particularly Microsoft Project, PowerBI, SharePoint Administration, PowerPoint, and Excel• Communication and Presentation Skills –will need strong communication skills to be able to get complex ideas across in an easy-to-understand fashionPreferred:• PROSCI, PMP• Broad business experience focused on large and/or transformational change is an asset• Experience in design, brand development and project management• Experience with Adobe Suite and/or graphic designSummaryOur major client, an energy transportation company with a focus on transportation, distribution, and energy generation is urgently looking to fill an Engagement and Measurement Specialist who will be responsible for strategic planning and the development and execution of a wide range of activities that inform and involve internal and external stakeholders for awareness and understanding of the Unify Program.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Our client in the Brantford area has partnered with Randstad Engineering in the search for an Applications Engineer to join their growing team! Are you passionate about technical support? Do you have experience providing front-line technical support to sales, contractors and customers? Do you have refrigeration and HVAC experience? This role is for you!Advantages- Competitive compensation- Health care savings account- Competitive benefits- Profit sharing programResponsibilities- Read, interpret, and respond to sales or customer product-related questions- Design refrigeration systems and select equipment based on parameters- Prepare quotations for customers- Offer technical support and troubleshooting expertise for field issues in person or over the telephone- Work with contractors, customers, sales, engineering, and manufacturing groups- Must be able to travel to USQualifications- Mechanical Engineering Degree/ Diploma- Minimum 5+ Years of Refrigeration background or related experience- Commercial Refrigeration experience- Strong working knowledge of refrigeration systems/ components and how to apply them- Must possess a valid passport with the ability to cross between Canada and the USSummaryApply online today! Or send your resume to Lisa Medeiros at lisa.medeiros@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Our client in the Hamilton area has partnered with Randstad Engineering in the search for a Drafter to join their team! Do you have experience detailing building components such as sheeting, trim, insulation, doors and re-clad? Do you want to work on something new each day? This role could be for you!Advantages- competitive compensation- immediate benefits- RRSP contribution match- work for a growing teamResponsibilities- create material take-offs for re-clad and retro fit projects- Estimate and submit quotes to customers- Detail steel building drawings- Communicate directly with customers with regards to pricing, schedule and project issues-Work directly with customer, drafters and engineersQualifications- College diploma in an Architectural, Construction or Civil Technician program- Previous experience estimating steel construction - Read and interpret architectural drawings- 2 years experience in Estimating- AutoCAD working knowledge- Previous experience detailing building component drawings- Strong understanding of steel building construction processSummaryApply online today! Or send your resume to Lisa Medeiros at lisa.medeiros@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Job DescriptionEngineer II – Pipeline Hydraulics and ProgrammingEdmonton, ABContractJob Reference No.: ENBJP00013022Our major client, an energy transportation company with a focus on transportation, distribution, and energy generation is urgently looking to fill an Engineer position with experience in Pipeline Hydraulics and Programming. Experience dealing with SCADA people and control centre is highly desirable. Pipeline project and/or company experience is mandatory for the role.Description:• This position is responsible for supporting Leak Detection Initiatives and ongoing Capital Projects.• This position is accountable for configuring, maintaining, and quality assurance testing leak detection Computational Pipeline Monitoring (CPM) systems and related technologies.• This position is responsible for supporting Leak Detection Subject Matter Experts (LD SMEs) in the development and execution of implementation plans, as well as the development and update of project documentation.Specific Accountabilities:• Works under the direction of Leak Detection subject matter experts and Project Managers.• Performs statistical analysis of large data sets.• Performs routine maintenance tasks on leak detection models which includes reviews of alarms, displays, overrides, model diagnostics, and data files.• Performs data path commissioning.• Performs updates to model configurations.• Creates/reviews/updates documentation.• Develops and updates rollout plans.• Creates/updates procedures and training materials.• Provides forecasts for work tasks, and provides progress updates.Scope/Dimensions:• This is a safety-critical role where daily activities and independent decisions can directly influence the Organization’s ability to respond to a release or comply with existing leak detection-related regulations.• Performs independent analysis of leak detection systems and informs Subject Matter Experts of results and findings.• Supports Leak Detection projects with scope up to several hundred thousand dollars.Contacts (Working Relationships) :• On a daily basis, this position works directly with Leak Detection Subject Matter Experts, Project Managers, SCADA Systems Analysts, and other Leak Detection team members to ensure that existing Leak Detection Systems are functioning.• This position documents and communicates results and issues impacting the Projects to the LD SMEs, Supervisors and Manager in Leak Detection.Knowledge, Skills & Abilities:• A Professional Engineer, or an equivalent Systems Analyst, with a minimum of 4 years of hydraulic and computer programming experience, that includes at least 1 year directly related to computational pipeline modeling.• Knowledge in pipeline hydraulics.• Previous experience using real-time transient model software and/or statistical modeling software.• Experience working with analyzing large data sets.• Proven ability to work in a fast-paced and dynamic environment.• Effective communication, facilitation, customer service, and problem-solving skills.• Excellent knowledge of Microsoft Office applications.• Ability to work remotely.Preferred:• Experience with Synergi Pipeline Simulator.• Experience with Microsoft Teams.• Knowledge of Control Centre operations and SCADA systems.• Knowledge of SharePoint, JIRA, and PI.Work is conducted in a work-from-home environment but later is expected to be in an office environment during regular business hours once COVID restrictions are lifted. May be required on occasion to work outside regular working hours in order to meet project deadlines.If this sounds like the right role for you and you are confident in what you bring to the table, apply now!Although we appreciate all applications, only those that meet the minimum job qualifications will be considered for this role. We thank you all for your interest.Not the right fit this time? Follow us on our career’s social media pages!Interested candidate is also encouraged to submit a copy of the updated resume to Resource Manager, Geraldine Valiarayil at geraldine.valiarayil@randstad.ca, with the Job Order Number / Position Name in the subject line.AdvantagesYou will have the chance to work with the Energy leaders and the best in the industry!ResponsibilitiesDescription:• This position is responsible for supporting Leak Detection Initiatives and ongoing Capital Projects.• This position is accountable for configuring, maintaining, and quality assurance testing leak detection Computational Pipeline Monitoring (CPM) systems and related technologies.• This position is responsible for supporting Leak Detection Subject Matter Experts (LD SMEs) in the development and execution of implementation plans, as well as the development and update of project documentation.Specific Accountabilities:• Works under the direction of Leak Detection subject matter experts and Project Managers.• Performs statistical analysis of large data sets.• Performs routine maintenance tasks on leak detection models which includes reviews of alarms, displays, overrides, model diagnostics, and data files.• Performs data path commissioning.• Performs updates to model configurations.• Creates/reviews/updates documentation.• Develops and updates rollout plans.• Creates/updates procedures and training materials.• Provides forecasts for work tasks, and provides progress updates.Qualifications• A Professional Engineer, or an equivalent Systems Analyst, with a minimum of 4 years of hydraulic and computer programming experience, that includes at least 1 year directly related to computational pipeline modeling.• Knowledge in pipeline hydraulics.• Previous experience using real-time transient model software and/or statistical modeling software.• Experience working with analyzing large data sets.• Proven ability to work in a fast-paced and dynamic environment.• Effective communication, facilitation, customer service, and problem-solving skills.• Excellent knowledge of Microsoft Office applications.• Ability to work remotely.SummaryOur major client, an energy transportation company with a focus on transportation, distribution, and energy generation is urgently looking to fill an Engineer position with experience in Pipeline Hydraulics and Programming. Experience dealing with SCADA people and control centre is highly desirable. Pipeline project and/or company experience is mandatory for the role.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Position Description •Collect, organize and store parts data/artifacts in support of approved customer maintenance concept•Document the physical breakdown of the vehicle, assembly and/or subsystem(s) in accordance with applicable standards and populate the applicable Data Element Definitions (DED) in the Logistics Support Analysis Record (LSAR) database•Obtain Interactive Electronic Technical Manual (IETM) source data•Develop/write procedures as part of overall development of Repair Parts and Special Tool List (RPSTL) and/or IETM•Generate accurate illustration request to support RPSTL and IETM development•Liaise with LE groups and other company departments for inputs•Assist in updating status logs of work assigned AdvantagesIntegrated Logistic Analyst/EngineerLondon Ontario12 month contract$24.00 – 32.00/hourResponsibilities•Ability to travel (5% Cdn) and (5% US & Int'l) and possess/be able to acquire and maintain a valid passport•Familiarity with vehicle standards and specifications•Experience with SGML/XML, Documentum or working in a Content Management System (CMS)QualificationsPosition Requirements •University Degree or College Diploma in a technical discipline•1-2 years relevant experience•Ability to interpret engineering drawings/schematics•Proficient communication, organization and prioritization skillsSummaryIf you have the necessary qualifications to excel in this position, please apply online.Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Are you a Lead Instrumentation Engineer with experience in Gold Processing?Are you looking for an opportunity with a dynamic growing organization?If so, this could be the opportunity for you! • Modeling Instruments and Junction Boxes• Develop Detail Drawings (Process, Pneumatic, Support And Electrical), instrument index, I/O list, ,instrument location and cable routing, Loop diagrams, instruments and valves sizing and data sheets, instrument specification, PLC & communication equipment specification, RFQ, material list handling, ladder diagrams, block diagrams, functional diagrams, logic diagrams, PLC specification.• Develop P&ID, cause & effect diagrams, control narratives.• Site surveys and evaluation of instrumentation associated with mechanical packages (P&ID, Instrument data sheets, wiring, control narratives).• Specify and design DCS and the Emergency shutdown system. Size and specify control valves, On-off valves, Pressure Relief Valves, Pressure Regulators.• Specify and evaluate Pressure, Temperature, Level and flow instruments and F&G Detectors• Cable SchedulesPosition is a 6 month contract, with ability to be longer term.AdvantagesAbility to work with a dynamic growing organization.Competitive compensation and an opportunity for long term work.Responsibilities• Modeling Instruments and Junction Boxes• Develop Detail Drawings (Process, Pneumatic, Support And Electrical), instrument index, I/O list, ,instrument location and cable routing, Loop diagrams, instruments and valves sizing and data sheets, instrument specification, PLC & communication equipment specification, RFQ, material list handling, ladder diagrams, block diagrams, functional diagrams, logic diagrams, PLC specification.• Develop P&ID, cause & effect diagrams, control narratives.• Site surveys and evaluation of instrumentation associated with mechanical packages (P&ID, Instrument data sheets, wiring, control narratives).• Specify and design DCS and the Emergency shutdown system. Size and specify control valves, On-off valves, Pressure Relief Valves, Pressure Regulators.• Specify and evaluate Pressure, Temperature, Level and flow instruments and F&G Detectors• Cable SchedulesQualificationsRelated post secondary Degree.Experience in Gold Processing ProjectsMining Industry project experience an asset.SummaryTo apply, email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

KEY RESPONSIBILITIES: Develops and maintains Quality Assurance processes within the client, ensuring that quality issues are effectively prioritized and analyzed as they arise. Collaborates with various internal stakeholders, such as Standards and Energy Solutions and Supply Chain Services, during the investigation of quality issues. Collaborates with external suppliers, such as manufacturers and distributors, to ensure quality issues are resolved and actions are taken to prevent reoccurrence. Provides timely technical support and consultation, demonstrates effective project management and process efficiencies; reviews, develops and/or presents detailed business proposals, plans, designs, processes, operational procedures and practices. Analyzes equipment failures to identify root cause and identify preventative actions. Compares alternative technical/business solutions based on cost/benefit considerations, customer needs, safety, and statistical analysis and engineering principles, and recommends the optimum solution. Maintains internal databases and develops various reports as requested by internal groups or Management. Resolves concerns or gaps identified through internal and/or external audits. Collaborates with various internal departments to streamline and improve compliance and quality assurance related activities. Participates on internal committees and project teams as required on a wide variety of business initiatives. Supports Senior Management on ad hoc assignments arising from various external committees. Participates in special investigations and studies, and prepares reports with findings and recommendations. Represents client in external meetings and/or committees. COMPETENCIES: Registered as a Professional Engineer in the Province of Ontario. Post-secondary degree in Engineering, Electrical or Mechanical Engineering preferred. Minimum 3 years of engineering experience. Must have a valid Class “G” Driver’s License. Knowledge in Quality Assurance and Quality Management Systems is an asset. Excellent problem solving and analytical ability, as well as organization and planning skills. Strong written and verbal communication skills demonstrated through report writing and delivering presentations; possess active listening skills and openly contributes ideas. Fluent in the application of information technology, such as MS Office, data analysis software, database applications and specialized engineering application software. Strong project management skills with the ability to bring projects in on time and on budget. Ability to adapt and work effectively through a variety of situations, collaborating with various individuals and groups, and willing to challenge the status quo. Self-motivated, operates with a high degree of independence and can visualize opportunities for change in support of continuous process improvement. Demonstrates versatile leadership; encourages organizational teamwork and collaboration, and takes educated risks to develop innovative solutions. Strong stakeholder management and negotiation skills.Please send your resume in confidence to paul.dusome@randstad.ca AdvantagesProvides timely technical support and consultation, demonstrates effective project management and process efficiencies; reviews, develops and/or presents detailed business proposals, plans, designs, processes, operational procedures and practices. Analyzes equipment failures to identify root cause and identify preventative actions. Compares alternative technical/business solutions based on cost/benefit considerations, customer needs, safety, and statistical analysis and engineering principles, and recommends the optimum solution. ResponsibilitiesKEY RESPONSIBILITIES: Develops and maintains Quality Assurance processes within the client, ensuring that quality issues are effectively prioritized and analyzed as they arise. Collaborates with various internal stakeholders, such as Standards and Energy Solutions and Supply Chain Services, during the investigation of quality issues. Collaborates with external suppliers, such as manufacturers and distributors, to ensure quality issues are resolved and actions are taken to prevent reoccurrence. Provides timely technical support and consultation, demonstrates effective project management and process efficiencies; reviews, develops and/or presents detailed business proposals, plans, designs, processes, operational procedures and practices. Analyzes equipment failures to identify root cause and identify preventative actions. Compares alternative technical/business solutions based on cost/benefit considerations, customer needs, safety, and statistical analysis and engineering principles, and recommends the optimum solution. Maintains internal databases and develops various reports as requested by internal groups or Management. Resolves concerns or gaps identified through internal and/or external audits. Collaborates with various internal departments to streamline and improve compliance and quality assurance related activities. Participates on internal committees and project teams as required on a wide variety of business initiatives. Supports Senior Management on ad hoc assignments arising from various external committees. Participates in special investigations and studies, and prepares reports with findings and recommendations. Represents client in external meetings and/or committees. COMPETENCIES: Registered as a Professional Engineer in the Province of Ontario. Post-secondary degree in Engineering, Electrical or Mechanical Engineering preferred. Minimum 3 years of engineering experience. Must have a valid Class “G” Driver’s License. Knowledge in Quality Assurance and Quality Management Systems is an asset. Excellent problem solving and analytical ability, as well as organization and planning skills. Strong written and verbal communication skills demonstrated through report writing and delivering presentations; possess active listening skills and openly contributes ideas. Fluent in the application of information technology, such as MS Office, data analysis software, database applications and specialized engineering application software. Strong project management skills with the ability to bring projects in on time and on budget. Ability to adapt and work effectively through a variety of situations, collaborating with various individuals and groups, and willing to challenge the status quo. Self-motivated, operates with a high degree of independence and can visualize opportunities for change in support of continuous process improvement. Demonstrates versatile leadership; encourages organizational teamwork and collaboration, and takes educated risks to develop innovative solutions. Strong stakeholder management and negotiation skills.Please send your resume in confidence to paul.dusome@randstad.ca QualificationsRegistered as a Professional Engineer in the Province of Ontario. Post-secondary degree in Engineering, Electrical or Mechanical Engineering preferred. Minimum 3 years of engineering experience. Must have a valid Class “G” Driver’s License. Knowledge in Quality Assurance and Quality Management Systems is an asset. Excellent problem solving and analytical ability, as well as organization and planning skills. Strong written and verbal communication skills demonstrated through report writing and delivering presentations; possess active listening skills and openly contributes ideas. Fluent in the application of information technology, such as MS Office, data analysis software, database applications and specialized engineering application software. Strong project management skills with the ability to bring projects in on time and on budget. SummaryKEY RESPONSIBILITIES: Develops and maintains Quality Assurance processes within the client, ensuring that quality issues are effectively prioritized and analyzed as they arise. Collaborates with various internal stakeholders, such as Standards and Energy Solutions and Supply Chain Services, during the investigation of quality issues. Collaborates with external suppliers, such as manufacturers and distributors, to ensure quality issues are resolved and actions are taken to prevent reoccurrence. Provides timely technical support and consultation, demonstrates effective project management and process efficiencies; reviews, develops and/or presents detailed business proposals, plans, designs, processes, operational procedures and practices. Analyzes equipment failures to identify root cause and identify preventative actions. Compares alternative technical/business solutions based on cost/benefit considerations, customer needs, safety, and statistical analysis and engineering principles, and recommends the optimum solution. Maintains internal databases and develops various reports as requested by internal groups or Management. Resolves concerns or gaps identified through internal and/or external audits. Collaborates with various internal departments to streamline and improve compliance and quality assurance related activities. Participates on internal committees and project teams as required on a wide variety of business initiatives. Supports Senior Management on ad hoc assignments arising from various external committees. Participates in special investigations and studies, and prepares reports with findings and recommendations. Represents client in external meetings and/or committees. COMPETENCIES: Registered as a Professional Engineer in the Province of Ontario. Post-secondary degree in Engineering, Electrical or Mechanical Engineering preferred. Minimum 3 years of engineering experience. Must have a valid Class “G” Driver’s License. Knowledge in Quality Assurance and Quality Management Systems is an asset. Excellent problem solving and analytical ability, as well as organization and planning skills. Strong written and verbal communication skills demonstrated through report writing and delivering presentations; possess active listening skills and openly contributes ideas. Fluent in the application of information technology, such as MS Office, data analysis software, database applications and specialized engineering application software. Strong project management skills with the ability to bring projects in on time and on budget. Ability to adapt and work effectively through a variety of situations, collaborating with various individuals and groups, and willing to challenge the status quo. Self-motivated, operates with a high degree of independence and can visualize opportunities for change in support of continuous process improvement. Demonstrates versatile leadership; encourages organizational teamwork and collaboration, and takes educated risks to develop innovative solutions. Strong stakeholder management and negotiation skills.Please send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.