Description Being part of Air Canada is to become part of an iconic Canadian symbol, recently ranked the best Airline in North America. Let your career take flight by joining our diverse and vibrant team at the leading edge of passenger aviation. Air Canada is presently looking for for a dynamic individual to fill a permanent full- time position as of a Ground Support Equipment (GSE) Mechanic. The GSE maintenance professionals should have the following skill sets:Knowledge of drive-trains, diesel and gasoline engines, propane fuel systems, complex electrical and hydraulic systems, and metal fabrication and welding.Candidates should be able to read and understand various schematic diagrams for maintenance troubleshooting and be proficient with computers and diagnostic tools.Individuals need to be "team players" with excellent written and verbal communication skills with the ability to maintain a customer focused attitude in a demanding, high stress environment.Qualifications Mandatory Covid-19 Vaccination RequiredHigh School diploma.Valid Automotive Service Technician, Commercial Transport Mechanic or Heavy Duty Mechanic trades certification.Inter-Provincial Red Seal. A minimum of five (5) years experience in the trade.Able to successfully pass the pre-employment qualifying exam.Ability to pass security clearance and obtain the Restricted area identity card (RAIC). Please refer to Transport Canada site for more detailsEmployees in this role, conduct safety-critical work and as such, Air Canada medical standards must be met in order to qualify for the role. Candidates will be subject to a medical evaluation, including a drug and alcohol test an are expected to be free of any intoxicating substances.Candidates must be eligible to work in the country of interest, at the time any offer of employment is made and seeking any required work permits/visas or other authorizations which may be required is the sole responsibly of the candidates applying for this position.Must be able to obtain and maintain any applicable transportation security clearances and additional authorizations depending on the work location. Please refer to Transport Canada site for more details.AssetsAdvanced Fuel Injection & Diesel Engine Tune-Up certificates/licenses.Air Conditioning and Refrigeration certificates/licenses.Propane Fuel Systems certificates/licenses.Automotive Inspection certificate/licenses.Previous experience maintaining mobile ground power (generators), air conditioners (up to 110 ton), air start units (compressors up to 250 cfm), but will also consider experience in Farm or Heavy Industrial equipment.Current security clearanceLinguistic Requirements Based on equal qualifications, preference will be given to bilingual candidates.Diversity and Inclusion Air Canada is strongly committed to Diversity and Inclusion and aims to create a healthy, accessible and rewarding work environment which highlights employees’ unique contributions to our company’s success. As an equal opportunity employer, we welcome applications from all to help us build a diverse workforce which reflects the diversity of our customers, and communities, in which we live and serve. Air Canada thanks all candidates for their interest; however only those selected to continue in the process will be contacted.
Description Being part of Air Canada is to become part of an iconic Canadian symbol, recently ranked the best Airline in North America. Let your career take flight by joining our diverse and vibrant team at the leading edge of passenger aviation. Air Canada is presently looking for for a dynamic individual to fill a permanent full- time position as of a Ground Support Equipment (GSE) Mechanic. The GSE maintenance professionals should have the following skill sets:Knowledge of drive-trains, diesel and gasoline engines, propane fuel systems, complex electrical and hydraulic systems, and metal fabrication and welding.Candidates should be able to read and understand various schematic diagrams for maintenance troubleshooting and be proficient with computers and diagnostic tools.Individuals need to be "team players" with excellent written and verbal communication skills with the ability to maintain a customer focused attitude in a demanding, high stress environment.Qualifications Mandatory Covid-19 Vaccination RequiredHigh School diploma.Valid Automotive Service Technician, Commercial Transport Mechanic or Heavy Duty Mechanic trades certification.Inter-Provincial Red Seal. A minimum of five (5) years experience in the trade.Able to successfully pass the pre-employment qualifying exam.Ability to pass security clearance and obtain the Restricted area identity card (RAIC). Please refer to Transport Canada site for more detailsEmployees in this role, conduct safety-critical work and as such, Air Canada medical standards must be met in order to qualify for the role. Candidates will be subject to a medical evaluation, including a drug and alcohol test an are expected to be free of any intoxicating substances.Candidates must be eligible to work in the country of interest, at the time any offer of employment is made and seeking any required work permits/visas or other authorizations which may be required is the sole responsibly of the candidates applying for this position.Must be able to obtain and maintain any applicable transportation security clearances and additional authorizations depending on the work location. Please refer to Transport Canada site for more details.AssetsAdvanced Fuel Injection & Diesel Engine Tune-Up certificates/licenses.Air Conditioning and Refrigeration certificates/licenses.Propane Fuel Systems certificates/licenses.Automotive Inspection certificate/licenses.Previous experience maintaining mobile ground power (generators), air conditioners (up to 110 ton), air start units (compressors up to 250 cfm), but will also consider experience in Farm or Heavy Industrial equipment.Current security clearanceLinguistic Requirements Based on equal qualifications, preference will be given to bilingual candidates.Diversity and Inclusion Air Canada is strongly committed to Diversity and Inclusion and aims to create a healthy, accessible and rewarding work environment which highlights employees’ unique contributions to our company’s success. As an equal opportunity employer, we welcome applications from all to help us build a diverse workforce which reflects the diversity of our customers, and communities, in which we live and serve. Air Canada thanks all candidates for their interest; however only those selected to continue in the process will be contacted.
Are you looking for a position with varied tasks that will allow you to put your Industrial Mechanic knowledge into practice within a family-oriented work team? Are you stimulated by a fast-paced work environment, and recognized as the person who takes pride in their work and loves "rolling up their sleeves"? Do you have experience in the manufacturing and fabrication industry, with the belief that as a millwright you can fix anything and everything?Are you hoping to grow with a company that has a passion for giving back to its employees and fosters employee appreciation?Then look no further, we have a role for you!Our client has been one the trusted names in their industry for almost 70 years and is recognized across North America as a leader by setting the standard in fabrication and innovative products.We're looking a millwright or maintenance mechanic, for a permanent day shift position, with a company located inside the city of Calgary.The day shift is 7am to 3pm Monday -FridayAdvantagesWhat's in it for you:$39+ an hour, with a wage raise at 6, 18, and 36 months after probation ($47+ by 36th month after probation)An additional annual raiseHealth insurance at 3 months (covered by the company)Dental insurance at 6 months (covered by the company)Pension at 24 months (matching 50% of contributions, up to 1.5% of wage)$150 annual gift card for work bootsNew staff are partnered with a company veteran if any further training is needed in pneumatics and hydraulics ResponsibilitiesTake an active role in the fabrication and manufacturing systems by:-Maintaining, upgrading, and repairing plant equipment to ensure a high level of performance with minimal downtime.-Having an understanding of machine and system schematics to effectively P.M., troubleshoot, and do root-cause repairs on high-speed machinery and equipment (with a focus on robotic pneumatics and hydraulics issues).-Abide by all Health & Safety rules, safe practices and requirements laid out by company procedures-Help minimize equipment downtime by reacting quickly to equipment issuesQualificationsWhat you need to bring:-Journeyman Millwright (Red Seal preferred).**Second JM ticket in electrical a bonus. Experience in HD mechanical and / or refrigeration work is not mandatory, but it helps.-Looking for a career Millwright who wants to grow with a company-Your own set of basic Industrial Mechanic tools (specialized tools provided)-The company does pre-hire (crim + drug) check SummaryInterested in hearing more? Let us know by…Visiting www.randstad.ca and apply through the posting or by applying by e-mail at: chad.desruisseaux@randstad.caAre you interested in this position, but it's not quite what you're looking for? Let us know, as a specialist in skilled trades recruitment, we can certainly help you in your job searchRandstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
Are you looking for a position with varied tasks that will allow you to put your Industrial Mechanic knowledge into practice within a family-oriented work team? Are you stimulated by a fast-paced work environment, and recognized as the person who takes pride in their work and loves "rolling up their sleeves"? Do you have experience in the manufacturing and fabrication industry, with the belief that as a millwright you can fix anything and everything?Are you hoping to grow with a company that has a passion for giving back to its employees and fosters employee appreciation?Then look no further, we have a role for you!Our client has been one the trusted names in their industry for almost 70 years and is recognized across North America as a leader by setting the standard in fabrication and innovative products.We're looking a millwright or maintenance mechanic, for a permanent day shift position, with a company located inside the city of Calgary.The day shift is 7am to 3pm Monday -FridayAdvantagesWhat's in it for you:$39+ an hour, with a wage raise at 6, 18, and 36 months after probation ($47+ by 36th month after probation)An additional annual raiseHealth insurance at 3 months (covered by the company)Dental insurance at 6 months (covered by the company)Pension at 24 months (matching 50% of contributions, up to 1.5% of wage)$150 annual gift card for work bootsNew staff are partnered with a company veteran if any further training is needed in pneumatics and hydraulics ResponsibilitiesTake an active role in the fabrication and manufacturing systems by:-Maintaining, upgrading, and repairing plant equipment to ensure a high level of performance with minimal downtime.-Having an understanding of machine and system schematics to effectively P.M., troubleshoot, and do root-cause repairs on high-speed machinery and equipment (with a focus on robotic pneumatics and hydraulics issues).-Abide by all Health & Safety rules, safe practices and requirements laid out by company procedures-Help minimize equipment downtime by reacting quickly to equipment issuesQualificationsWhat you need to bring:-Journeyman Millwright (Red Seal preferred).**Second JM ticket in electrical a bonus. Experience in HD mechanical and / or refrigeration work is not mandatory, but it helps.-Looking for a career Millwright who wants to grow with a company-Your own set of basic Industrial Mechanic tools (specialized tools provided)-The company does pre-hire (crim + drug) check SummaryInterested in hearing more? Let us know by…Visiting www.randstad.ca and apply through the posting or by applying by e-mail at: chad.desruisseaux@randstad.caAre you interested in this position, but it's not quite what you're looking for? Let us know, as a specialist in skilled trades recruitment, we can certainly help you in your job searchRandstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
Are you a millwright, or a maintenance mechanic (millwright apprentice), who is looking for a position in a booming company that owns their industry market?Do you have experience in the manufacturing and fabrication industry with a with a notion to conquer anything and everything?Are you hoping to grow with a company that has a passion for giving back to its employees that fosters employee appreciation?Do you stand out for in your ability to "understand how things work" and enjoy solving mechanical and electrical problems with your “I can fix anything and everything” mindset?Then look no further, we have a role for you!We're hiring a mechanically inclined individual with manufacturing experience for our client, located within the city of Calgary.Our client has been one the trusted names in their industry for almost 100 years and is recognized worldwide for their quality products. We're looking an afternoon shift millwright or maintenance mechanic who takes pride in their work and loves "rolling up their sleeves".Yes, they even have an apprentice program that covers your schooling and signing off on your hours.Advantages-4x 10 hour days. 3:00pm-1:30am – Mon to Thurs, with a 3 day weekend.-Up to $38 based on experience (apprentice: 60% / 70%/ 80%/ 90% depending on year)-100% company paid benefits-5% pension matching after 3 months-2 weeks paid vacation time-Fun, engaging company culture-Company paid training and millwright hours signed offResponsibilities-Able to work from 3:30pm to 1:30 am-Maintain and repair plant equipment to ensure a high level of performance with minimal downtime, including preventive maintenance on engines, motors, pneumatic tools, conveyor systems, and production machines.-Repairs, upgrades, and rebuilds on mechanical machinery (including overhauls on 40 – 100 ton presses)-A maintenance technician will work with management, and the rest of their department, to increase all key areas of reliability and communicate possible issues.-Equipment inspection, testing, lubrication, and following an in-depth trouble shooting program-Understand and follow the parts inventory flow and ticket systems Qualifications-Previous manufacturing / preventative maintenance experience-Mechanically inclined (minimum first year millwright )-Physically fit, able to lift up to 50lbs-Safety conscious-A team player-Able to work in confined spaces-Industrial Millwright (Journeyman) certification an assetSummaryInterested in hearing more? Let us know by…Visiting www.randstad.ca and apply through the posting or by applying by e-mail at: chad.desruisseaux@randstad.caAre you interested in this position, but it's not quite what you're looking for? Let us know, as a specialist in skilled trades recruitment, we can certainly help you in your job searchRandstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
Are you a millwright, or a maintenance mechanic (millwright apprentice), who is looking for a position in a booming company that owns their industry market?Do you have experience in the manufacturing and fabrication industry with a with a notion to conquer anything and everything?Are you hoping to grow with a company that has a passion for giving back to its employees that fosters employee appreciation?Do you stand out for in your ability to "understand how things work" and enjoy solving mechanical and electrical problems with your “I can fix anything and everything” mindset?Then look no further, we have a role for you!We're hiring a mechanically inclined individual with manufacturing experience for our client, located within the city of Calgary.Our client has been one the trusted names in their industry for almost 100 years and is recognized worldwide for their quality products. We're looking an afternoon shift millwright or maintenance mechanic who takes pride in their work and loves "rolling up their sleeves".Yes, they even have an apprentice program that covers your schooling and signing off on your hours.Advantages-4x 10 hour days. 3:00pm-1:30am – Mon to Thurs, with a 3 day weekend.-Up to $38 based on experience (apprentice: 60% / 70%/ 80%/ 90% depending on year)-100% company paid benefits-5% pension matching after 3 months-2 weeks paid vacation time-Fun, engaging company culture-Company paid training and millwright hours signed offResponsibilities-Able to work from 3:30pm to 1:30 am-Maintain and repair plant equipment to ensure a high level of performance with minimal downtime, including preventive maintenance on engines, motors, pneumatic tools, conveyor systems, and production machines.-Repairs, upgrades, and rebuilds on mechanical machinery (including overhauls on 40 – 100 ton presses)-A maintenance technician will work with management, and the rest of their department, to increase all key areas of reliability and communicate possible issues.-Equipment inspection, testing, lubrication, and following an in-depth trouble shooting program-Understand and follow the parts inventory flow and ticket systems Qualifications-Previous manufacturing / preventative maintenance experience-Mechanically inclined (minimum first year millwright )-Physically fit, able to lift up to 50lbs-Safety conscious-A team player-Able to work in confined spaces-Industrial Millwright (Journeyman) certification an assetSummaryInterested in hearing more? Let us know by…Visiting www.randstad.ca and apply through the posting or by applying by e-mail at: chad.desruisseaux@randstad.caAre you interested in this position, but it's not quite what you're looking for? Let us know, as a specialist in skilled trades recruitment, we can certainly help you in your job searchRandstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
Are you a trailer mechanic looking for work? If you have been seeking a great company to work for this is your opportunity to get in with a great company and hit the ground running. If you are reliable and a quick learner who likes to evolve with changing demands of the industry then this position is for you. You will be working for Canada's premier tank and trailer supplier performing, CVIP inspections, service and repairs of all makes of tank trailers custom fabrication and modification, tank mounts and remounts.Advantages- Competitive salary and benefits package.- In-house training available.- Day Shift 7 AM - Overtime available- Permanent position- Growth within the company - Competitive pay- Unionized environmentResponsibilities-Adjust, repair or replace parts and components of truck-trailer systems including trailer electrical and electronic systems, trailer landing gear assemblies, trailer frames, hitching and coupling systems, trailer bodies, trailer suspension parts, tires, wheels, rims, hubs, and axles, air and auxiliary systems, trailer braking systems, hydraulic systems, using hand tools and other specialized repair equipment.-Test and adjust repaired systems to the manufacturer's performance specifications.- Perform scheduled maintenance service.- Duties may be performed in a confined space, which involves climbing ladders and working above the ground.- Work with Supervisors and Lead Hands to ensure continuous improvements in work cells, hitting quotas, welding according to pre-set parameters using MIG, ARC and TIG welding processQualifications- Preference is given to those with Air and Electrical Experience.- Inspect tanks and tank trailer systems and components. B620 and CVIP are nessceary- Mechanically inclined.- Air and electrical experience is an asset.- Experience in Tank Trailer Service is an asset.- Excellent organizational skills.- Attention to detail.- Must be able to work independently.- Welding an asset.SummaryIf you think you could be exactly who we are looking for, please reach out directly to us today! This position will not be available for long!We thank all applicants for applying. Only those who are qualified will be contacted for an interview.Please note that due to the COVID-19 government regulations in place our offices are temporarily closed.However, please apply via this application link alternatively you can email Moumen.etbail@randstad.ca or call 587-338-4952.Looking forward to hearing from you!Regards,Moumen EtbailRandstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
Are you a trailer mechanic looking for work? If you have been seeking a great company to work for this is your opportunity to get in with a great company and hit the ground running. If you are reliable and a quick learner who likes to evolve with changing demands of the industry then this position is for you. You will be working for Canada's premier tank and trailer supplier performing, CVIP inspections, service and repairs of all makes of tank trailers custom fabrication and modification, tank mounts and remounts.Advantages- Competitive salary and benefits package.- In-house training available.- Day Shift 7 AM - Overtime available- Permanent position- Growth within the company - Competitive pay- Unionized environmentResponsibilities-Adjust, repair or replace parts and components of truck-trailer systems including trailer electrical and electronic systems, trailer landing gear assemblies, trailer frames, hitching and coupling systems, trailer bodies, trailer suspension parts, tires, wheels, rims, hubs, and axles, air and auxiliary systems, trailer braking systems, hydraulic systems, using hand tools and other specialized repair equipment.-Test and adjust repaired systems to the manufacturer's performance specifications.- Perform scheduled maintenance service.- Duties may be performed in a confined space, which involves climbing ladders and working above the ground.- Work with Supervisors and Lead Hands to ensure continuous improvements in work cells, hitting quotas, welding according to pre-set parameters using MIG, ARC and TIG welding processQualifications- Preference is given to those with Air and Electrical Experience.- Inspect tanks and tank trailer systems and components. B620 and CVIP are nessceary- Mechanically inclined.- Air and electrical experience is an asset.- Experience in Tank Trailer Service is an asset.- Excellent organizational skills.- Attention to detail.- Must be able to work independently.- Welding an asset.SummaryIf you think you could be exactly who we are looking for, please reach out directly to us today! This position will not be available for long!We thank all applicants for applying. Only those who are qualified will be contacted for an interview.Please note that due to the COVID-19 government regulations in place our offices are temporarily closed.However, please apply via this application link alternatively you can email Moumen.etbail@randstad.ca or call 587-338-4952.Looking forward to hearing from you!Regards,Moumen EtbailRandstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
Attention maintenance mechanics:Are you a millwright, or a maintenance mechanic, who is looking for a position in a booming food company that has been growing consistently over the last 65 years?Do you have experience in the manufacturing and fabrication industry, and you take personal pride in supervising machines that run well?Are you hoping to grow with a company that has a passion for giving back to its employees that fosters employee appreciation?Do you enjoy solving mechanical problems, and want to be a part of a company shift into robotics?Then look no further, we have a role for you!Our client has been one of the biggest names in the food industry for over 60 years, and is still growing through their dedication to excellence and their team We're looking for a night shift millwright (11pm to 7am) to be responsible for the P.M., upkeep, and repair of manufacturing and high-speed packaging equipmentAdvantagesWhat's in it for you:-Competitive wage: $39.34 an hour plus $1.25 an hour night shift premium-In the city-A great job, in a stable (even during pandemic) company, with room to advance-Union pension plans with employer contributions-Health / dental and disability coverage.-Company health and wellness program-and even employee discountsResponsibilitiesTake an active role in the manufacturing systems by:-Maintaining, upgrading, and repairing plant equipment to ensure a high level of performance with minimal downtime.-Having an understanding of machine and system schematics to effectively P.M., troubleshoot, and do root-cause repairs on high-speed machinery and equipment (with a focus on pneumatics, conveyors, and hydraulics issues). -Help minimize equipment downtime by reacting quickly to equipment issues-Install, upgrade, and modify production machines (including reading blueprints)-Follow all company and Industry policies, rules, and requirements in regards to personal and food manufacturing safety-Consistent communication with the manager and other tradespersons to ensure peak production and forecast potential issuesQualificationsRequirements:Millwright ticket (journeyman or Red Seal) with industrial experience (manufacturing or fabrication)Experience in Hydraulics and pneumaticsAbility to be reliable, honest, and show strong work ethicBasic electrical, fabrication, welding (stainless), and machining experienceKnowledge or ability to quickly learn CMMS (M2, SAP) programsSummaryInterested in hearing more? Let us know by…Visiting www.randstad.ca and apply through the posting or by applying by e-mail at: chad.desruisseaux@randstad.caAre you interested in this position, but it's not quite what you're looking for? Let us know, as a specialist in skilled trades recruitment, we can certainly help you in your job searchRandstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
Attention maintenance mechanics:Are you a millwright, or a maintenance mechanic, who is looking for a position in a booming food company that has been growing consistently over the last 65 years?Do you have experience in the manufacturing and fabrication industry, and you take personal pride in supervising machines that run well?Are you hoping to grow with a company that has a passion for giving back to its employees that fosters employee appreciation?Do you enjoy solving mechanical problems, and want to be a part of a company shift into robotics?Then look no further, we have a role for you!Our client has been one of the biggest names in the food industry for over 60 years, and is still growing through their dedication to excellence and their team We're looking for a night shift millwright (11pm to 7am) to be responsible for the P.M., upkeep, and repair of manufacturing and high-speed packaging equipmentAdvantagesWhat's in it for you:-Competitive wage: $39.34 an hour plus $1.25 an hour night shift premium-In the city-A great job, in a stable (even during pandemic) company, with room to advance-Union pension plans with employer contributions-Health / dental and disability coverage.-Company health and wellness program-and even employee discountsResponsibilitiesTake an active role in the manufacturing systems by:-Maintaining, upgrading, and repairing plant equipment to ensure a high level of performance with minimal downtime.-Having an understanding of machine and system schematics to effectively P.M., troubleshoot, and do root-cause repairs on high-speed machinery and equipment (with a focus on pneumatics, conveyors, and hydraulics issues). -Help minimize equipment downtime by reacting quickly to equipment issues-Install, upgrade, and modify production machines (including reading blueprints)-Follow all company and Industry policies, rules, and requirements in regards to personal and food manufacturing safety-Consistent communication with the manager and other tradespersons to ensure peak production and forecast potential issuesQualificationsRequirements:Millwright ticket (journeyman or Red Seal) with industrial experience (manufacturing or fabrication)Experience in Hydraulics and pneumaticsAbility to be reliable, honest, and show strong work ethicBasic electrical, fabrication, welding (stainless), and machining experienceKnowledge or ability to quickly learn CMMS (M2, SAP) programsSummaryInterested in hearing more? Let us know by…Visiting www.randstad.ca and apply through the posting or by applying by e-mail at: chad.desruisseaux@randstad.caAre you interested in this position, but it's not quite what you're looking for? Let us know, as a specialist in skilled trades recruitment, we can certainly help you in your job searchRandstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
We are looking for individuals who want to grow their career in the right direction!Attention Maintenance mechanics and Millwrights, our client has been in the Oil and Gas industry for almost 140 years, and is looking to grow their team.We want to talk to you if:You consider yourself an professional millwright with strong communication skills, and are looking for a new permanent positionYou have extensive knowledge of Oil and Gas pumps ( multi and single stage, barrel, all high rpm pumps)You want to be a part of the Oil and Gas industry, but you would like to go home at the end of each dayYou want to grow with a company that has a passion for giving back to its employees and fosters employee appreciation?You get a feeling of accomplishment when you complete a fitting with high toleranceAdvantagesSome of the benefits are:-Job is located in the city of Calgary -Straight day shifts. 7am - 3:30pm-Competitive pay ($40/hr or more depending on experience)-Starting at 3 weeks of accumulated vacation-Pension plan matching-Full Medical and Dental after probation-Clean work environment ResponsibilitiesThe primary job responsibility will be building and customizing pumps, this includes:-Balancing and aligning motors, bearings, shafts, impellors, and pump cases-Pump rebuilds (testing measurements and fits), root cause analysis on moving equipment repairs -Inspecting and Documenting (and recording) all build and repair processes on A.P.I. rotating equipment -Some piping and tubing bending, testing and tack welding (welding, basic machining, and brazing experience a bonus)-Abide by all Health & Safety rules, safe practices and requirements laid out by company procedures and industry standardsQualificationsTo be a great fit for this job, please:-Have a Journeyperson Millwright ticket (Red Seal preferred)-Have strong work ethic and be reliable -Ability to read (interpret) and and follow complex engineer drawings-Ability to work well as a team (and communicate well with the engineers and other trades)SummaryInterested in hearing more? Let us know by…Visiting www.randstad.ca and apply through the posting or by applying by e-mail at: chad.desruisseaux@randstad.caAre you interested in this position, but it's not quite what you're looking for? Let us know, as a specialist in skilled trades recruitment, we can certainly help you in your job searchRandstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
We are looking for individuals who want to grow their career in the right direction!Attention Maintenance mechanics and Millwrights, our client has been in the Oil and Gas industry for almost 140 years, and is looking to grow their team.We want to talk to you if:You consider yourself an professional millwright with strong communication skills, and are looking for a new permanent positionYou have extensive knowledge of Oil and Gas pumps ( multi and single stage, barrel, all high rpm pumps)You want to be a part of the Oil and Gas industry, but you would like to go home at the end of each dayYou want to grow with a company that has a passion for giving back to its employees and fosters employee appreciation?You get a feeling of accomplishment when you complete a fitting with high toleranceAdvantagesSome of the benefits are:-Job is located in the city of Calgary -Straight day shifts. 7am - 3:30pm-Competitive pay ($40/hr or more depending on experience)-Starting at 3 weeks of accumulated vacation-Pension plan matching-Full Medical and Dental after probation-Clean work environment ResponsibilitiesThe primary job responsibility will be building and customizing pumps, this includes:-Balancing and aligning motors, bearings, shafts, impellors, and pump cases-Pump rebuilds (testing measurements and fits), root cause analysis on moving equipment repairs -Inspecting and Documenting (and recording) all build and repair processes on A.P.I. rotating equipment -Some piping and tubing bending, testing and tack welding (welding, basic machining, and brazing experience a bonus)-Abide by all Health & Safety rules, safe practices and requirements laid out by company procedures and industry standardsQualificationsTo be a great fit for this job, please:-Have a Journeyperson Millwright ticket (Red Seal preferred)-Have strong work ethic and be reliable -Ability to read (interpret) and and follow complex engineer drawings-Ability to work well as a team (and communicate well with the engineers and other trades)SummaryInterested in hearing more? Let us know by…Visiting www.randstad.ca and apply through the posting or by applying by e-mail at: chad.desruisseaux@randstad.caAre you interested in this position, but it's not quite what you're looking for? Let us know, as a specialist in skilled trades recruitment, we can certainly help you in your job searchRandstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
Description Are you passionate about reaching new heights, teamwork and making a meaningful contribution? Do you picture yourself as a valued member of an industry-leading organization? If you answered yes to these questions, Air Canada is seeking enthusiastic individuals to join the diverse and vibrant team working together to lead the growth and expansion of Canada’s flag carrier. Air Canada is presently looking for a dynamic individual to fill a permanent full-time position as of a Facility Maintenance Mechanic at Edmonton Airport.Perform preventative maintenance & servicing to Building related mechanical equipment. Investigate and troubleshoot faulty Hangar Doors, Overhead doors, fire doors, etc. Ability to install, maintain, repair, dismantle, and reassemble machinery.Ability to use welding equipment, hand, and power tools as necessary.Perform minor repairs including replacement of gearboxes, sprockets, chains, door panels Perform visual inspections of buildings to maintain Building Code standards.Ensure all work is completed in a safe manner and complies with applicable industry standards.Performing other facility related duties as requested.Team oriented individual with demonstrated ability to work unsupervised and self directed.Able to work under pressure.Able to work shifts, including weekends & participate in on-call rotation.Qualifications Mandatory Covid-19 Vaccination RequiredMust posses a valid DVS (Diploma of Vocational Studies). Must posses valid Driver’s licence with clean abstract Must posses an Interprovincial Journeyman Millwright license or Red Seal Minimum 5 years field experience. Knowledge of building mechanics, Hangar door systems, control systems, Mechanical system operation, MIG welding, CMMS Candidate must have excellent written and oral communication skills and be detailed oriented. Basic computer knowledge (Word, Excel, e-mail and internet). Employees in this role, conduct safety-critical work and as such, Air Canada medical standards must be met in order to qualify for the role. Candidates will be subject to a medical evaluation, including a drug and alcohol test and are expected to be free of any intoxicating substances.Candidates must be eligible to work in the country of interest, at the time any offer of employment is made and seeking any required work permits/visas or other authorizations which may be required is the sole responsibly of the candidates applying for this position.Linguistic RequirementsBased on equal qualifications, preference will be given to bilingual candidates.Diversity and InclusionAir Canada is strongly committed to Diversity and Inclusion and aims to create a healthy, accessible and rewarding work environment which highlights employees’ unique contributions to our company’s success. As an equal opportunity employer, we welcome applications from all to help us build a diverse workforce which reflects the diversity of our customers, and communities, in which we live and serve.Air Canada thanks all candidates for their interest; however only those selected to continue in the process will be contacted.
Description Are you passionate about reaching new heights, teamwork and making a meaningful contribution? Do you picture yourself as a valued member of an industry-leading organization? If you answered yes to these questions, Air Canada is seeking enthusiastic individuals to join the diverse and vibrant team working together to lead the growth and expansion of Canada’s flag carrier. Air Canada is presently looking for a dynamic individual to fill a permanent full-time position as of a Facility Maintenance Mechanic at Edmonton Airport.Perform preventative maintenance & servicing to Building related mechanical equipment. Investigate and troubleshoot faulty Hangar Doors, Overhead doors, fire doors, etc. Ability to install, maintain, repair, dismantle, and reassemble machinery.Ability to use welding equipment, hand, and power tools as necessary.Perform minor repairs including replacement of gearboxes, sprockets, chains, door panels Perform visual inspections of buildings to maintain Building Code standards.Ensure all work is completed in a safe manner and complies with applicable industry standards.Performing other facility related duties as requested.Team oriented individual with demonstrated ability to work unsupervised and self directed.Able to work under pressure.Able to work shifts, including weekends & participate in on-call rotation.Qualifications Mandatory Covid-19 Vaccination RequiredMust posses a valid DVS (Diploma of Vocational Studies). Must posses valid Driver’s licence with clean abstract Must posses an Interprovincial Journeyman Millwright license or Red Seal Minimum 5 years field experience. Knowledge of building mechanics, Hangar door systems, control systems, Mechanical system operation, MIG welding, CMMS Candidate must have excellent written and oral communication skills and be detailed oriented. Basic computer knowledge (Word, Excel, e-mail and internet). Employees in this role, conduct safety-critical work and as such, Air Canada medical standards must be met in order to qualify for the role. Candidates will be subject to a medical evaluation, including a drug and alcohol test and are expected to be free of any intoxicating substances.Candidates must be eligible to work in the country of interest, at the time any offer of employment is made and seeking any required work permits/visas or other authorizations which may be required is the sole responsibly of the candidates applying for this position.Linguistic RequirementsBased on equal qualifications, preference will be given to bilingual candidates.Diversity and InclusionAir Canada is strongly committed to Diversity and Inclusion and aims to create a healthy, accessible and rewarding work environment which highlights employees’ unique contributions to our company’s success. As an equal opportunity employer, we welcome applications from all to help us build a diverse workforce which reflects the diversity of our customers, and communities, in which we live and serve.Air Canada thanks all candidates for their interest; however only those selected to continue in the process will be contacted.
Calling all mechanical technicians! Are you interested in joining a company where you feel involved, respected and valued for your ideas? Would you like to do your part in solving the world’s most challenging water issues with advanced technology? Well you’ve certainly come to the right place. This is an amazing opportunity for a technician with a mechanical background that also cares for corporate responsibility. We are looking for an experienced pump & service mechanic that can pay attention to detail, is physically fit, and has good problem solving skills. Most importantly, someone who is passionate about what they do. So if you live in the Edmonton area, join our team today!Advantages-Professional development and continuous learning from several experiences to support employees -Endless opportunities available for recognition, learning and development, work-life integration and corporate citizenship.-Employee Networks including Women’s, LGBT+ and Allies, Veteran’s, People of Color and Allies, Emerging Leaders, and Working Parents Networks.-Salary ranges from $30-35/hour, -comprehensive programs for compensation and benefits are availableResponsibilities-Dissembling, diagnosing, repairing and servicing of equipment. Assisting with field work related to mechanical and electrical start-ups -Lifting equipment and parts (30-40 pounds) -Operating overhead, JIB and HIAB cranes.-Operating lift truck and crane truck.Qualifications-Knowledge of PLC and electrical control panels will be a distinct benefit-Driver’s license -Millwright License is an advantage-Graduation from community or technical college in the technical or mechanical field SummaryIf this position seems like a fit for you then run, don’t walk and apply! Feel free to send us an email at field.services@randstad.ca Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
Calling all mechanical technicians! Are you interested in joining a company where you feel involved, respected and valued for your ideas? Would you like to do your part in solving the world’s most challenging water issues with advanced technology? Well you’ve certainly come to the right place. This is an amazing opportunity for a technician with a mechanical background that also cares for corporate responsibility. We are looking for an experienced pump & service mechanic that can pay attention to detail, is physically fit, and has good problem solving skills. Most importantly, someone who is passionate about what they do. So if you live in the Edmonton area, join our team today!Advantages-Professional development and continuous learning from several experiences to support employees -Endless opportunities available for recognition, learning and development, work-life integration and corporate citizenship.-Employee Networks including Women’s, LGBT+ and Allies, Veteran’s, People of Color and Allies, Emerging Leaders, and Working Parents Networks.-Salary ranges from $30-35/hour, -comprehensive programs for compensation and benefits are availableResponsibilities-Dissembling, diagnosing, repairing and servicing of equipment. Assisting with field work related to mechanical and electrical start-ups -Lifting equipment and parts (30-40 pounds) -Operating overhead, JIB and HIAB cranes.-Operating lift truck and crane truck.Qualifications-Knowledge of PLC and electrical control panels will be a distinct benefit-Driver’s license -Millwright License is an advantage-Graduation from community or technical college in the technical or mechanical field SummaryIf this position seems like a fit for you then run, don’t walk and apply! Feel free to send us an email at field.services@randstad.ca Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
Are you a millwright, or a maintenance mechanic in your 3rd or 4th year millwright apprenticeship, who is looking for a position in a booming company that owns their industry market? Do you have experience in the manufacturing and fabrication industry with a with a notion to conquer anything and everything? Are you hoping to grow with a company that has a passion for giving back to its employees that fosters employee appreciation? Do you enjoy solving mechanical and electrical problems with your “I can fix anything and everything” mindset?Then look no further, we have a role for you!Our client has been one the trusted names in their industry for almost 100 years, and is recognized worldwide for their innovative products. We're looking a millwright or maintenance tech who takes pride in their work and loves "rolling up their sleeves".AdvantagesWhat's in it for you:• Up to $37.50 an hour (depending on experience and tickets)• Being a part of a fast growing company, that has room for you to advance and develop• RRSPS• Pension Plan• Medical, dental, life insurance, short and long term disability, flexible spending accounts, long-term care options, group legal and wellness programs.• 10 paid holidays per year, plus an employee’s choice day.• Tuition reimbursement.ResponsibilitiesMaintain and repair plant equipment to ensure a high level of performance with minimal downtime. A maintenance technician will work with management, and the rest of their department, to increase all key areas of reliability and communicate possible issues.Take an active role in the fabrication and manufacturing systems by:•Having an understanding of machine and system schematics to effectively P.M., troubleshoot, and repair machinery and equipment (including any minor electrical issues) •Perform repairs on production equipment as required •Perform preventative maintenance on equipment and follow proper procedures •Help minimize equipment downtime by reacting quickly to equipment issues •Keep the maintenance supervisor apprised of long term work or repairs •Work with machine operators when troubleshooting equipment problems •Keep notes on known issues and potential line improvements •Abide by all Health & Safety rules, safe practices and requirements laid out by company procedures•Take a leadership role and represent the maintenance department while working on shift to make effective decisions to support the continued operation of the plant. -This includes providing input, planning, and performing maintenance work for planned shutdowns•Support the companies World Class Manufacturing initiativesQualificationsWhat we're looking forJourneyman MillwrightOR 3rd or 4th year Millwright Apprentice Ability to perform MIG/TIG and ARC weldingHave an understand of electrical fundamentals SummaryInterested in hearing more? Let us know by…Visiting www.randstad.ca and apply through the posting or by applying by e-mail at: chad.desruisseaux@randstad.caAre you interested in this position, but it's not quite what you're looking for? Let us know, as a specialist in skilled trades recruitment, we can certainly help you in your job searchRandstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
Are you a millwright, or a maintenance mechanic in your 3rd or 4th year millwright apprenticeship, who is looking for a position in a booming company that owns their industry market? Do you have experience in the manufacturing and fabrication industry with a with a notion to conquer anything and everything? Are you hoping to grow with a company that has a passion for giving back to its employees that fosters employee appreciation? Do you enjoy solving mechanical and electrical problems with your “I can fix anything and everything” mindset?Then look no further, we have a role for you!Our client has been one the trusted names in their industry for almost 100 years, and is recognized worldwide for their innovative products. We're looking a millwright or maintenance tech who takes pride in their work and loves "rolling up their sleeves".AdvantagesWhat's in it for you:• Up to $37.50 an hour (depending on experience and tickets)• Being a part of a fast growing company, that has room for you to advance and develop• RRSPS• Pension Plan• Medical, dental, life insurance, short and long term disability, flexible spending accounts, long-term care options, group legal and wellness programs.• 10 paid holidays per year, plus an employee’s choice day.• Tuition reimbursement.ResponsibilitiesMaintain and repair plant equipment to ensure a high level of performance with minimal downtime. A maintenance technician will work with management, and the rest of their department, to increase all key areas of reliability and communicate possible issues.Take an active role in the fabrication and manufacturing systems by:•Having an understanding of machine and system schematics to effectively P.M., troubleshoot, and repair machinery and equipment (including any minor electrical issues) •Perform repairs on production equipment as required •Perform preventative maintenance on equipment and follow proper procedures •Help minimize equipment downtime by reacting quickly to equipment issues •Keep the maintenance supervisor apprised of long term work or repairs •Work with machine operators when troubleshooting equipment problems •Keep notes on known issues and potential line improvements •Abide by all Health & Safety rules, safe practices and requirements laid out by company procedures•Take a leadership role and represent the maintenance department while working on shift to make effective decisions to support the continued operation of the plant. -This includes providing input, planning, and performing maintenance work for planned shutdowns•Support the companies World Class Manufacturing initiativesQualificationsWhat we're looking forJourneyman MillwrightOR 3rd or 4th year Millwright Apprentice Ability to perform MIG/TIG and ARC weldingHave an understand of electrical fundamentals SummaryInterested in hearing more? Let us know by…Visiting www.randstad.ca and apply through the posting or by applying by e-mail at: chad.desruisseaux@randstad.caAre you interested in this position, but it's not quite what you're looking for? Let us know, as a specialist in skilled trades recruitment, we can certainly help you in your job searchRandstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to accessibility@randstad.ca to ensure their ability to fully participate in the interview process.
