thank you for subscribing to your personalised job alerts.

    28 jobs found for millwright in ontario

    filter2
    • sector
      working in
      show 28 jobs
      clear filter
    • location1
      location & range
        show 28 jobs
        clear filter
      • job types
        job types
        show 28 jobs
        clear filter
      clear all
        • Guelph, Ontario
        • Permanent
        • $28.00 - $33.00 per hour
        Are you a registered Millwright Apprentice looking to get into the food industry? Do you enjoy working on newer equipment?We are looking for a Millwright apprentice for an organization in the Food Industry in Guelph. This organization is looking to triple its locations in the next few years, and they prefer to promote from within! If you have a goal of becoming a Maintenance Supervisor or Maintenance Manager in the next 5 years, you need to keep reading!Advantages- day shift, 7 am - 7 pm (day shift continental)- work 7 days out of 14!- a brand new facility- recession-proof industry - they have grown throughout the pandemic- split your time between reactive maintenance (25%), preventative maintenance (50%) and project work (25%)- organization promotes from within- $28-$33 hourly, pending on where you in your apprenticeship- culture of camaraderie, hands-on management that are not afraid to get their hands dirty- highly automated facility- do something good for the environment!- see the products on local grocery storesResponsibilities- maintaining a variety of equipment, such as labelers, mixers, fillers, conveyors, scales, etc- work alongside electricians- maintaining strong SOP's, assist with developing new ones- basic electrical troubleshooting skills- steady work pace- working with a variety of pneumatics and hydraulics- refer back to manuals to assist with troubleshooting- basic welding skills are a bonusQualifications- registered 433A Millwright Apprentice with a minimum of 5500 hours completed- strong attention to detail- ability to work as a part of a team- ideally, you have experience in the food or pharmaceutical environment- previous experience with labeling equipment- huge bonus if you are dual ticketed Millwright/Electrician (extra $$ rate will apply)- live in Guelph, or within an easy commute of GuelphSummaryIf you are interested in finding out more about this opportunity, there are several ways for you to apply. Call Shannon or Katarina at 519-763-7775 x2email your resume to stimsouthwestontario@randstad.caapply online at randstad.caWe work with employers in the Waterloo Region, Guelph, Woodstock, Stratford, and Brantford to assist talent in finding new opportunities as a Millwright, Electrician, Machinist, Machine Builder, Tool & Die Maker or Welders.
        Are you a registered Millwright Apprentice looking to get into the food industry? Do you enjoy working on newer equipment?We are looking for a Millwright apprentice for an organization in the Food Industry in Guelph. This organization is looking to triple its locations in the next few years, and they prefer to promote from within! If you have a goal of becoming a Maintenance Supervisor or Maintenance Manager in the next 5 years, you need to keep reading!Advantages- day shift, 7 am - 7 pm (day shift continental)- work 7 days out of 14!- a brand new facility- recession-proof industry - they have grown throughout the pandemic- split your time between reactive maintenance (25%), preventative maintenance (50%) and project work (25%)- organization promotes from within- $28-$33 hourly, pending on where you in your apprenticeship- culture of camaraderie, hands-on management that are not afraid to get their hands dirty- highly automated facility- do something good for the environment!- see the products on local grocery storesResponsibilities- maintaining a variety of equipment, such as labelers, mixers, fillers, conveyors, scales, etc- work alongside electricians- maintaining strong SOP's, assist with developing new ones- basic electrical troubleshooting skills- steady work pace- working with a variety of pneumatics and hydraulics- refer back to manuals to assist with troubleshooting- basic welding skills are a bonusQualifications- registered 433A Millwright Apprentice with a minimum of 5500 hours completed- strong attention to detail- ability to work as a part of a team- ideally, you have experience in the food or pharmaceutical environment- previous experience with labeling equipment- huge bonus if you are dual ticketed Millwright/Electrician (extra $$ rate will apply)- live in Guelph, or within an easy commute of GuelphSummaryIf you are interested in finding out more about this opportunity, there are several ways for you to apply. Call Shannon or Katarina at 519-763-7775 x2email your resume to stimsouthwestontario@randstad.caapply online at randstad.caWe work with employers in the Waterloo Region, Guelph, Woodstock, Stratford, and Brantford to assist talent in finding new opportunities as a Millwright, Electrician, Machinist, Machine Builder, Tool & Die Maker or Welders.
        • New Hamburg, Ontario
        • Permanent
        Are you a Maintenance Technician or Licensed Millwright looking for a new opportunity?Do you have experience working with gear cutting machines, gear shapers, grinders and cnc machinery?We are looking for a Maintenance Technician or Licensed Millwright to work for a leading manufacturer of gears, transmissions and automotive parts on the afternoon shiftAdvantages- straight afternoon shift (3:15 pm - 1:45 am) - 4 10s schedule (Monday to Thursday)- $25.00 - $35.00 hourly rate (pending experience)- career development- team atmosphere- uniforms provided (7 pairs!)- laundry service provided - 3 paid sick days- profit sharing - new equipment and machinery on site- strong tenure on site- work within a smaller team of 3 on scheduled shift- pensionResponsibilities-performing breakdown and preventative maintenance-facility maintenance when needed-performing maintenance on gear cutting machines, gear shapers, grinders, cnc machinery-using your problem solving skills on a daily basis-maintaining a safe work environment Qualifications- 433a license- or millwright apprentice with experience in an industrial setting- previous maintenance experience with cnc equipment- understanding of basic electrical and hydraulic systems- ability to work independently without supervision and within a teamSummaryIf you are interested in this opportunity, there are several ways for you to apply.- call us at 519-763-7775 x2- email us at stimsouthwest@randstad.ca- apply online at randstad.caInterested, but not quite what you are looking for? Give us a call to discuss what you are looking for from your career in Skilled Trades. We speak with a variety of organizations in many different industries daily, focusing on Millwright, Electrician, Machine Builder, Tool & Die Maker and Welder/Fitters. We look forward to hearing from you.
        Are you a Maintenance Technician or Licensed Millwright looking for a new opportunity?Do you have experience working with gear cutting machines, gear shapers, grinders and cnc machinery?We are looking for a Maintenance Technician or Licensed Millwright to work for a leading manufacturer of gears, transmissions and automotive parts on the afternoon shiftAdvantages- straight afternoon shift (3:15 pm - 1:45 am) - 4 10s schedule (Monday to Thursday)- $25.00 - $35.00 hourly rate (pending experience)- career development- team atmosphere- uniforms provided (7 pairs!)- laundry service provided - 3 paid sick days- profit sharing - new equipment and machinery on site- strong tenure on site- work within a smaller team of 3 on scheduled shift- pensionResponsibilities-performing breakdown and preventative maintenance-facility maintenance when needed-performing maintenance on gear cutting machines, gear shapers, grinders, cnc machinery-using your problem solving skills on a daily basis-maintaining a safe work environment Qualifications- 433a license- or millwright apprentice with experience in an industrial setting- previous maintenance experience with cnc equipment- understanding of basic electrical and hydraulic systems- ability to work independently without supervision and within a teamSummaryIf you are interested in this opportunity, there are several ways for you to apply.- call us at 519-763-7775 x2- email us at stimsouthwest@randstad.ca- apply online at randstad.caInterested, but not quite what you are looking for? Give us a call to discuss what you are looking for from your career in Skilled Trades. We speak with a variety of organizations in many different industries daily, focusing on Millwright, Electrician, Machine Builder, Tool & Die Maker and Welder/Fitters. We look forward to hearing from you.
        • London, Ontario
        • Permanent
        Maintenance Millwright - $34/hr - Straight Nights - LondonIf you're an Millwright who is looking for a new challenge then please consider this Maintenance Millwright position in London, Ontario. If you're passionate about your trade and you love to work in a positive and team-oriented environment then this is the right opportunity for you. Our client has a state-of-the-art facility with new equipment making it an exciting adventure to embark on. Your expertise is requested to work for a large advanced manufacturing plant located in London Ontario.AdvantagesWhat's in it for you?• $34/hr to start (plus $0.70 shift premiums)• Health benefits package• Profit sharing and RRSP matching plans• Company events and incentive programs• Variety on the job• Minimal travel required• Straight nights • Opportunity for overtimeResponsibilitiesWhat is required for the position?• Preventative maintenance of equipment• Electrical repairs• Improvements and modifications to existing equipment• Corrective maintenance to prevent line stoppage and downtime• Request for parts as needed• Perform PLC installations, improvements, modifications, and integrations• Trouble-shoot PLCs, drive, and controls• Comply with safety rules and regulationsQualificationsWhat do you need to apply?• Millwright Certificate of Qualification (433A) or 3rd Term Millwright Apprentice • Minimum 3 years of industrial maintenance experience• Working knowledge of hydraulic, pneumatic, and mechanical systems • PLC knowledge of Siemens 7 and HMI considered an asset • Ability to read electrical prints• Familiar with material handling systems, conveyor systems, pumps, gearboxes, drive systems and industrial automation• Strong mechanical aptitude• Good communication and ability to work overtimeSummaryPlease apply directly to this posting or email your resume to tyler.withers@randstad.caIf you want to stay connected to a professional Recruiter feel free to:Email Tyler at tyler.withers@randstad.caConnect on LinkedIn: https://www.linkedin.com/in/tyler-withers-a64791144/Follow us in Facebook: https://www.facebook.com/randstadlondon/Don't forget we do referral bonuses. If you think you know someone who might be interested in the position, a successful placement will lead to a bonus between $50 - $500.If this position isn't for you, we still want to hear from you. Give us a call at 519-679-0058 ext. 2 to let us know what kind of career opportunities you're seeking. We're dedicated to helping you find, prepare and grow into new careers.We look forward to hearing from you.
        Maintenance Millwright - $34/hr - Straight Nights - LondonIf you're an Millwright who is looking for a new challenge then please consider this Maintenance Millwright position in London, Ontario. If you're passionate about your trade and you love to work in a positive and team-oriented environment then this is the right opportunity for you. Our client has a state-of-the-art facility with new equipment making it an exciting adventure to embark on. Your expertise is requested to work for a large advanced manufacturing plant located in London Ontario.AdvantagesWhat's in it for you?• $34/hr to start (plus $0.70 shift premiums)• Health benefits package• Profit sharing and RRSP matching plans• Company events and incentive programs• Variety on the job• Minimal travel required• Straight nights • Opportunity for overtimeResponsibilitiesWhat is required for the position?• Preventative maintenance of equipment• Electrical repairs• Improvements and modifications to existing equipment• Corrective maintenance to prevent line stoppage and downtime• Request for parts as needed• Perform PLC installations, improvements, modifications, and integrations• Trouble-shoot PLCs, drive, and controls• Comply with safety rules and regulationsQualificationsWhat do you need to apply?• Millwright Certificate of Qualification (433A) or 3rd Term Millwright Apprentice • Minimum 3 years of industrial maintenance experience• Working knowledge of hydraulic, pneumatic, and mechanical systems • PLC knowledge of Siemens 7 and HMI considered an asset • Ability to read electrical prints• Familiar with material handling systems, conveyor systems, pumps, gearboxes, drive systems and industrial automation• Strong mechanical aptitude• Good communication and ability to work overtimeSummaryPlease apply directly to this posting or email your resume to tyler.withers@randstad.caIf you want to stay connected to a professional Recruiter feel free to:Email Tyler at tyler.withers@randstad.caConnect on LinkedIn: https://www.linkedin.com/in/tyler-withers-a64791144/Follow us in Facebook: https://www.facebook.com/randstadlondon/Don't forget we do referral bonuses. If you think you know someone who might be interested in the position, a successful placement will lead to a bonus between $50 - $500.If this position isn't for you, we still want to hear from you. Give us a call at 519-679-0058 ext. 2 to let us know what kind of career opportunities you're seeking. We're dedicated to helping you find, prepare and grow into new careers.We look forward to hearing from you.
        • Scarborough, Ontario
        • Permanent
        • $35.00 - $37.00 per hour
        If you're a 433a certified millwright who is ready to embark on a new career journey on a STRAIGHT DAY shift then this is an opportunity you would NOT want to miss out on. Are you interested in working for a company that values its employees, with monthly meetings to ensure success across the company? Then look no further, this position is for you!AdvantagesWhat’s in it for you? - Salary: $35-37/hr - Shift premium - Shift: Straight shifts Day 8:30 -4:30pm - 100% employer-paid benefits - Annual performance bonus - 2 weeks of vacation - Safety shoe reimbursement - Tenured team, with great culture and “fun at work” attitude ResponsibilitiesWhat would your day look like as a millwright? 1. Plan and layout work assignments from complex blueprints, sketches or verbal instruction and accomplish these assignments with the maximum efficiency. 2. Operate mobile material handling equipment to position machinery and parts during installation, set-up and repair or machinery.3. Capable of inspecting, diagnosing, maintaining and repairing plant machinery, equipment, systems, building and physical structures.4. Competently and safely use all tools and operate all machine tools such as lathes and grinders for the efficient overhaul, maintenance or set-up of company property.5. Construct foundations for machinery or direct other workers to construct foundations.QualificationsWho are we looking for? - Certified 433a millwright - Over three years of experience working in a controlled environment (e.g. extrusion,plastic,packaging etc) - Excellent communication skills, willing to work within a team setting - Able to perform mig and tig welding processes SummaryInterested in hearing more? Let us know by… Visiting www.randstad.ca and apply through the postingApplying by e-mail at: wayne.desouza@randstad.ca Calling us at: 905-470-4248 and asking for WayneWe appreciate all applications; however, we will only be reaching out to those who meet the client’s qualifications. Please check out www.randstad.ca for all of the roles currently open at Randstad! If this isn’t exactly what you are looking for, please let us know what you’re looking for and we would be happy to assist you in finding your dream career in skilled trades! We cover all of York Region including Scarborough, Markham, Vaughan, Concord, Woodbridge, North York, and Newmarket. If you are looking for a role as a millwright (433a), electrician (309a or 442a), tool and die maker, machinist (manual or CNC), production supervisor, stamping press operator, or welder give us a call!289 387 1559
        If you're a 433a certified millwright who is ready to embark on a new career journey on a STRAIGHT DAY shift then this is an opportunity you would NOT want to miss out on. Are you interested in working for a company that values its employees, with monthly meetings to ensure success across the company? Then look no further, this position is for you!AdvantagesWhat’s in it for you? - Salary: $35-37/hr - Shift premium - Shift: Straight shifts Day 8:30 -4:30pm - 100% employer-paid benefits - Annual performance bonus - 2 weeks of vacation - Safety shoe reimbursement - Tenured team, with great culture and “fun at work” attitude ResponsibilitiesWhat would your day look like as a millwright? 1. Plan and layout work assignments from complex blueprints, sketches or verbal instruction and accomplish these assignments with the maximum efficiency. 2. Operate mobile material handling equipment to position machinery and parts during installation, set-up and repair or machinery.3. Capable of inspecting, diagnosing, maintaining and repairing plant machinery, equipment, systems, building and physical structures.4. Competently and safely use all tools and operate all machine tools such as lathes and grinders for the efficient overhaul, maintenance or set-up of company property.5. Construct foundations for machinery or direct other workers to construct foundations.QualificationsWho are we looking for? - Certified 433a millwright - Over three years of experience working in a controlled environment (e.g. extrusion,plastic,packaging etc) - Excellent communication skills, willing to work within a team setting - Able to perform mig and tig welding processes SummaryInterested in hearing more? Let us know by… Visiting www.randstad.ca and apply through the postingApplying by e-mail at: wayne.desouza@randstad.ca Calling us at: 905-470-4248 and asking for WayneWe appreciate all applications; however, we will only be reaching out to those who meet the client’s qualifications. Please check out www.randstad.ca for all of the roles currently open at Randstad! If this isn’t exactly what you are looking for, please let us know what you’re looking for and we would be happy to assist you in finding your dream career in skilled trades! We cover all of York Region including Scarborough, Markham, Vaughan, Concord, Woodbridge, North York, and Newmarket. If you are looking for a role as a millwright (433a), electrician (309a or 442a), tool and die maker, machinist (manual or CNC), production supervisor, stamping press operator, or welder give us a call!289 387 1559
        • London, Ontario
        • Permanent
        Millwright - $34/hr - 3 Shift Rotation - LondonIf you're a Millwright who is looking for a new challenge then please consider this Maintenance Millwright position in London, Ontario. If you're passionate about your trade and you love to learn new things, please consider this opportunity. If you have good experience with heavy manufacturing equipment then this may be the right position for you. This a large metal manufacturing facility with unique processes with room to grow in your profession. AdvantagesWhat's in it for you?• $34/hr to start (with shift premiums)• Health benefits package • Bonus opportunities• Excellent profit-sharing pension plan • Company events and incentive programs • Variety on the job • Minimal travel required • 3 shift rotation (every two weeks) • Amazing family oriented company culture ResponsibilitiesWhat is required for the position?• Assemble, install, troubleshoot and repair equipment• Inspect and test machinery and equipment • Complete preventative maintenance duties • Respond to breakdowns in a timely manner • Electrical, hydraulic, pneumatic, and industrial equipment QualificationsWhat do you need to apply?• Industrial Mechanic Millwright license (433A) • Minimum 3 years of heavy manufacturing maintenance experience • Proficient with welding, pneumatics, hydraulics and heavy equipment • Exposure to Allen Bradley PLC system • Good communication and ability to work overtime SummaryPlease apply directly to this posting or email your resume to tyler.withers@randstad.caIf you want to stay connected to a professional Recruiter feel free to:Email Tyler at tyler.withers@randstad.caConnect on LinkedIn: https://www.linkedin.com/in/tyler-withers-ba-a64791144/Follow us in Facebook: https://www.facebook.com/randstadlondon/Don't forget we do referral bonuses. If you think you know someone who might be interested in the position, a successful placement will lead to a bonus between $50 - $500.If this position isn't for you, we still want to hear from you. Give us a call at 416.962.6400 to let us know what kind of career opportunities you're seeking. We're dedicated to helping you find, prepare and grow into new careers.We look forward to hearing from you.
        Millwright - $34/hr - 3 Shift Rotation - LondonIf you're a Millwright who is looking for a new challenge then please consider this Maintenance Millwright position in London, Ontario. If you're passionate about your trade and you love to learn new things, please consider this opportunity. If you have good experience with heavy manufacturing equipment then this may be the right position for you. This a large metal manufacturing facility with unique processes with room to grow in your profession. AdvantagesWhat's in it for you?• $34/hr to start (with shift premiums)• Health benefits package • Bonus opportunities• Excellent profit-sharing pension plan • Company events and incentive programs • Variety on the job • Minimal travel required • 3 shift rotation (every two weeks) • Amazing family oriented company culture ResponsibilitiesWhat is required for the position?• Assemble, install, troubleshoot and repair equipment• Inspect and test machinery and equipment • Complete preventative maintenance duties • Respond to breakdowns in a timely manner • Electrical, hydraulic, pneumatic, and industrial equipment QualificationsWhat do you need to apply?• Industrial Mechanic Millwright license (433A) • Minimum 3 years of heavy manufacturing maintenance experience • Proficient with welding, pneumatics, hydraulics and heavy equipment • Exposure to Allen Bradley PLC system • Good communication and ability to work overtime SummaryPlease apply directly to this posting or email your resume to tyler.withers@randstad.caIf you want to stay connected to a professional Recruiter feel free to:Email Tyler at tyler.withers@randstad.caConnect on LinkedIn: https://www.linkedin.com/in/tyler-withers-ba-a64791144/Follow us in Facebook: https://www.facebook.com/randstadlondon/Don't forget we do referral bonuses. If you think you know someone who might be interested in the position, a successful placement will lead to a bonus between $50 - $500.If this position isn't for you, we still want to hear from you. Give us a call at 416.962.6400 to let us know what kind of career opportunities you're seeking. We're dedicated to helping you find, prepare and grow into new careers.We look forward to hearing from you.
        • North York, Ontario
        • Permanent
        • $87,000 - $95,000 per year
        Are you a 433A Millwright?Do you have previous experience in Metals and Recycling?Do you have at least 3 years of experience as a Millwright?Do you want to work with a dynamic employer that puts its people first?If yes, we want to hear from you! We are looking for a Lead Hand 433A Millwright to join for an afternoon shift Check it out below! Advantages- Very Competitive Salary ($42-45/hr)- Afternoon Shift (2:30PM-12AM M-T, 2:30PM-9PM F)- Early finish on Fridays - 2 Weeks of Vacation to start - Complimentary Uniform cleaning - Boot Allowance - Possibility for Growth Responsibilities- Perform Preventive Maintenance activities as assigned on all equipment and machines throughout the plant and yards in conjunction with daily production requirements- Repair breakdown of equipment, machinery, and infrastructure- Maintain hydraulic and pneumatic systems- Fabricate parts and other equipment as per instructions or blueprint- Install and commission new machinery- Perform weld repairs on equipment- Assist team with other responsibilities as they arise - Working both indoors and outdoors as needed Qualifications- 433A Industrial Millwright ticket - 3+ years of experience in a similar role - Experience with PM, Breakdown, Hydraulics and Pneumatics - Ability to fabricate and weld different metals with numerous techniques - Strong communication skills- Must be able to work indoors and outdoors - Ability to work independently to troubleshoot and repair on site - Drivers License - Having own tools an asset SummaryAre you a 433A Millwright?Do you have previous experience in Metals and Recycling?Do you have at least 3 years experience as a Millwright?Do you want to work with a dynamic employer that puts their people first?If yes, we want to hear from you!Check it out below! To apply:Applying by e-mail at: wayne.desouza@randstad.ca or dylan.lalta@randstad.caCalling us at: 905-470-4248 and asking for Dylan or Wayne
        Are you a 433A Millwright?Do you have previous experience in Metals and Recycling?Do you have at least 3 years of experience as a Millwright?Do you want to work with a dynamic employer that puts its people first?If yes, we want to hear from you! We are looking for a Lead Hand 433A Millwright to join for an afternoon shift Check it out below! Advantages- Very Competitive Salary ($42-45/hr)- Afternoon Shift (2:30PM-12AM M-T, 2:30PM-9PM F)- Early finish on Fridays - 2 Weeks of Vacation to start - Complimentary Uniform cleaning - Boot Allowance - Possibility for Growth Responsibilities- Perform Preventive Maintenance activities as assigned on all equipment and machines throughout the plant and yards in conjunction with daily production requirements- Repair breakdown of equipment, machinery, and infrastructure- Maintain hydraulic and pneumatic systems- Fabricate parts and other equipment as per instructions or blueprint- Install and commission new machinery- Perform weld repairs on equipment- Assist team with other responsibilities as they arise - Working both indoors and outdoors as needed Qualifications- 433A Industrial Millwright ticket - 3+ years of experience in a similar role - Experience with PM, Breakdown, Hydraulics and Pneumatics - Ability to fabricate and weld different metals with numerous techniques - Strong communication skills- Must be able to work indoors and outdoors - Ability to work independently to troubleshoot and repair on site - Drivers License - Having own tools an asset SummaryAre you a 433A Millwright?Do you have previous experience in Metals and Recycling?Do you have at least 3 years experience as a Millwright?Do you want to work with a dynamic employer that puts their people first?If yes, we want to hear from you!Check it out below! To apply:Applying by e-mail at: wayne.desouza@randstad.ca or dylan.lalta@randstad.caCalling us at: 905-470-4248 and asking for Dylan or Wayne
        • Brantford, Ontario
        • Permanent
        • $35.00 - $36.00 per hour
        If you are a licensed 433A Millwright with experience in high volume production environments, and looking for a straight day shift opening in Brantford, keep reading!This role will challenge your troubleshooting abilities while allowing you to continue to learn and develop your skills as a Millwright.Advantages- starting hourly rate - $35 - $36 hourly- profit-sharing that has equaled anywhere from $1.25 - $5 hourly in the past- very clean environment- overtime paid out after 42 hours worked weekly- easy going supervisors that care about your wellbeing - straight day shift of 7 am - 3 pm Monday to Friday- ongoing career development- company-paid benefits- annual tool and safety shoe allowance- company pension plan and quarterly bonus potential- opportunity for continuing education coursesResponsibilities- troubleshooting automated equipment- using a variety of PLC's to assist in troubleshooting- maintaining plastic extrusion and forming equipment- diligent in the documentation of work processes- strong communication is required to work with operators- work alongside one additional Millwright and an ElectricianQualifications- 433A Millwright license / red seal certificate - dual ticket Millwright/Electrician is a huge bonus- previous experience in a plastic/rubber manufacturer a definite advantage - available to be on call at times to support 24/7 production (paid for a minimum of 4 hours if called in)- previous experience working with plastics (injection molding)- strong communication and organizational skills are required - live within an easy commute of BrantfordSummaryIf you are interested in finding out more about this Millwright position located in Brantford, there are many ways to apply!- call us at 519-763-7775 x2- email your resume to stimsouthwestontario@randstad.ca- apply online at randstad.caPlease note, our offices are closed in Brantford, Waterloo and Guelph due to the ongoing pandemic, but we welcome your calls!Our services will not ever be at a cost to you. Registration with Randstad offers you the benefit of our industry knowledge and client database which spans over many industries. We place Millwrights, Electricians, Welders, Fitters, Tool & Die Makers, Machine Builders and Machinists in roles, and often have the inside scoop on positions that are not posted publicly. We look forward to hearing from you.
        If you are a licensed 433A Millwright with experience in high volume production environments, and looking for a straight day shift opening in Brantford, keep reading!This role will challenge your troubleshooting abilities while allowing you to continue to learn and develop your skills as a Millwright.Advantages- starting hourly rate - $35 - $36 hourly- profit-sharing that has equaled anywhere from $1.25 - $5 hourly in the past- very clean environment- overtime paid out after 42 hours worked weekly- easy going supervisors that care about your wellbeing - straight day shift of 7 am - 3 pm Monday to Friday- ongoing career development- company-paid benefits- annual tool and safety shoe allowance- company pension plan and quarterly bonus potential- opportunity for continuing education coursesResponsibilities- troubleshooting automated equipment- using a variety of PLC's to assist in troubleshooting- maintaining plastic extrusion and forming equipment- diligent in the documentation of work processes- strong communication is required to work with operators- work alongside one additional Millwright and an ElectricianQualifications- 433A Millwright license / red seal certificate - dual ticket Millwright/Electrician is a huge bonus- previous experience in a plastic/rubber manufacturer a definite advantage - available to be on call at times to support 24/7 production (paid for a minimum of 4 hours if called in)- previous experience working with plastics (injection molding)- strong communication and organizational skills are required - live within an easy commute of BrantfordSummaryIf you are interested in finding out more about this Millwright position located in Brantford, there are many ways to apply!- call us at 519-763-7775 x2- email your resume to stimsouthwestontario@randstad.ca- apply online at randstad.caPlease note, our offices are closed in Brantford, Waterloo and Guelph due to the ongoing pandemic, but we welcome your calls!Our services will not ever be at a cost to you. Registration with Randstad offers you the benefit of our industry knowledge and client database which spans over many industries. We place Millwrights, Electricians, Welders, Fitters, Tool & Die Makers, Machine Builders and Machinists in roles, and often have the inside scoop on positions that are not posted publicly. We look forward to hearing from you.
        • Etobicoke, Ontario
        • Permanent
        • $39.39 per hour
        Are you a Maintenance Team Lead looking for a full-time, permanent position within the Etobicoke location?Are you looking for a straight day shift to achieve that work-life balance?The ideal team lead will have a dual ticket (millwright / electrician), while we are also open to a licensed 433a millwright with supervisory experience to join an industry leader.Take a look and see if this is the role for you!AdvantagesDay Shift (overtime paid out)$39+ to start- A competitive medical, vision, and dental package- RRSP matching- Great company culture and team- Clean, well-ventilated, and organized working facility- Annual performance reviewResponsibilities- Ensure strict compliance by team members and contractors- Execute all elements of CMMS and directing all team members as required- Execute repairs and coordinate external contractors executing repairs- Ensure all members of the maintenance staff are adequately trained, equipped and motivated- Control and coordinate the procurement of parts and maintenance consumables- Receive parts and consumables from vendorsQualifications3-5 years of experience as a licensed Millwright (433A)- Computer literacy (excel, word, and CMMS proficiency)- Lock-out/Tag-out procedures- Understanding PLC systems (fault finding) and hydraulic and pneumatic troubleshooting- Basic machine shop skills such as: lathe, mill, drill press, grinder, welding machine, rigging- Previous supervisory experienceSummaryIf you want an environment where you can continue your knowledge and growth this is the position for you!Especially if you possess strong leadership skills, computer skills, able to problem solve/trouble shoot, maintain a safe working atmosphere and like earing overtime. This is your role. Apply now!sarah.dinis@randstad.ca 905 866 7092
        Are you a Maintenance Team Lead looking for a full-time, permanent position within the Etobicoke location?Are you looking for a straight day shift to achieve that work-life balance?The ideal team lead will have a dual ticket (millwright / electrician), while we are also open to a licensed 433a millwright with supervisory experience to join an industry leader.Take a look and see if this is the role for you!AdvantagesDay Shift (overtime paid out)$39+ to start- A competitive medical, vision, and dental package- RRSP matching- Great company culture and team- Clean, well-ventilated, and organized working facility- Annual performance reviewResponsibilities- Ensure strict compliance by team members and contractors- Execute all elements of CMMS and directing all team members as required- Execute repairs and coordinate external contractors executing repairs- Ensure all members of the maintenance staff are adequately trained, equipped and motivated- Control and coordinate the procurement of parts and maintenance consumables- Receive parts and consumables from vendorsQualifications3-5 years of experience as a licensed Millwright (433A)- Computer literacy (excel, word, and CMMS proficiency)- Lock-out/Tag-out procedures- Understanding PLC systems (fault finding) and hydraulic and pneumatic troubleshooting- Basic machine shop skills such as: lathe, mill, drill press, grinder, welding machine, rigging- Previous supervisory experienceSummaryIf you want an environment where you can continue your knowledge and growth this is the position for you!Especially if you possess strong leadership skills, computer skills, able to problem solve/trouble shoot, maintain a safe working atmosphere and like earing overtime. This is your role. Apply now!sarah.dinis@randstad.ca 905 866 7092
        • Woodbridge, Ontario
        • Permanent
        Our Client is looking for their next Industrial Mechanic Millwright!Are you ready to be apart of one of the largest recycler of scrap polymers in North America?Be apart of a team where staying positive, fighting hard and always supporting our teammates are our core values and we provide a cultivating, people centric environment that for the right person can mean the potential for fast personal growth and recognition. We encourage free thinking without bureaucracy and do not believe in keeping people in their boxes and with that some of our best ideas have come from all areas of the company.This organization is an equal opportunity employer and is committed to providing accessible employment practices that are in compliance with the Accessibility for Ontarians with Disabilities Act (AODA). Requests for accommodation can be made at any stage of the recruitment process.AdvantagesWe're Hiring for Continental Day Shift- Continental Day Shift: 8:00am - 8:30pm- Starting Salary: $36.00 /hour- Continental Day Shift Premium: $0.50 /hour- Week 1 (Mon, Tues, Fri, Sat, Sun), TWO days OFF- Week 2 (Wed, Thurs) FIVE days OFF- Work 7 (12.5 hour) days every 2 weeks- Work with cross-functional team membersBenefits:• Company paid comprehensive group benefits plan; including medical, dental, vision and life insurance• Professional growth opportunitiesResponsibilities- Troubleshoot and perform regular maintenance of all equipment and machines- Execute planned and ad hoc maintenance- Commission new equipment- Perform preventative maintenance for all equipment- Operate within a multi-skilled environment to maintain the plant’s machinery and equipment- Improving processes to minimize production disruptionQualifications- Certified Millwright (433A)- Completion of secondary school and a recognized Millwright Apprenticeship Program or equivalent- 2+ years of experience working as a Millwright in an industrial Manufacturing setting-Strong mechanical knowledge and electrical knowledge an asset- Hands-on experience working with pumps, motors, conveying equipment, hydraulic equipment and large industrial machines- Ability to troubleshoot equipment issues- Working knowledge of local and Canadian electrical and safety codes- Advanced working knowledge of electrical, PLC programming, and motor controls- Ability to read mechanical drawings, electrical schematics and manuals for equipment- Problem-solve and execute solutions, preferably in a fast-paced manufacturing/industrial environment- Manage multiple task and prioritize while staying organized- Work at heights (training will be provided)- Demonstrated leadership and work ethic- Able to adapt to changing priorities and working conditions- Experience using Maintenance Software programs- Counterbalance forklift certification and experience is considered an asset- Welding Certification an asset- Elevated work platform certification an asset-Clear criminal record check requiredSummaryIf you are interested in learning more about this exciting opportunity please don't hesitate to reach out to Sarah Dinis or Syndel Gerlings for more information. Get in touch with one of us, lets schedule a time where we can chat about this exciting opportunity, won't be around for long!If you would like to submit your resume --> sarah.dinis@randstad.ca OR syndel.gerlings@randstad.ca905 866 7092
        Our Client is looking for their next Industrial Mechanic Millwright!Are you ready to be apart of one of the largest recycler of scrap polymers in North America?Be apart of a team where staying positive, fighting hard and always supporting our teammates are our core values and we provide a cultivating, people centric environment that for the right person can mean the potential for fast personal growth and recognition. We encourage free thinking without bureaucracy and do not believe in keeping people in their boxes and with that some of our best ideas have come from all areas of the company.This organization is an equal opportunity employer and is committed to providing accessible employment practices that are in compliance with the Accessibility for Ontarians with Disabilities Act (AODA). Requests for accommodation can be made at any stage of the recruitment process.AdvantagesWe're Hiring for Continental Day Shift- Continental Day Shift: 8:00am - 8:30pm- Starting Salary: $36.00 /hour- Continental Day Shift Premium: $0.50 /hour- Week 1 (Mon, Tues, Fri, Sat, Sun), TWO days OFF- Week 2 (Wed, Thurs) FIVE days OFF- Work 7 (12.5 hour) days every 2 weeks- Work with cross-functional team membersBenefits:• Company paid comprehensive group benefits plan; including medical, dental, vision and life insurance• Professional growth opportunitiesResponsibilities- Troubleshoot and perform regular maintenance of all equipment and machines- Execute planned and ad hoc maintenance- Commission new equipment- Perform preventative maintenance for all equipment- Operate within a multi-skilled environment to maintain the plant’s machinery and equipment- Improving processes to minimize production disruptionQualifications- Certified Millwright (433A)- Completion of secondary school and a recognized Millwright Apprenticeship Program or equivalent- 2+ years of experience working as a Millwright in an industrial Manufacturing setting-Strong mechanical knowledge and electrical knowledge an asset- Hands-on experience working with pumps, motors, conveying equipment, hydraulic equipment and large industrial machines- Ability to troubleshoot equipment issues- Working knowledge of local and Canadian electrical and safety codes- Advanced working knowledge of electrical, PLC programming, and motor controls- Ability to read mechanical drawings, electrical schematics and manuals for equipment- Problem-solve and execute solutions, preferably in a fast-paced manufacturing/industrial environment- Manage multiple task and prioritize while staying organized- Work at heights (training will be provided)- Demonstrated leadership and work ethic- Able to adapt to changing priorities and working conditions- Experience using Maintenance Software programs- Counterbalance forklift certification and experience is considered an asset- Welding Certification an asset- Elevated work platform certification an asset-Clear criminal record check requiredSummaryIf you are interested in learning more about this exciting opportunity please don't hesitate to reach out to Sarah Dinis or Syndel Gerlings for more information. Get in touch with one of us, lets schedule a time where we can chat about this exciting opportunity, won't be around for long!If you would like to submit your resume --> sarah.dinis@randstad.ca OR syndel.gerlings@randstad.ca905 866 7092
        • Barrie, Ontario
        • Permanent
        Do you have a Dual Ticket - 433A Industrial Millwright AND 442a Industrial Electrician license and looking for a position within the Barrie area . No more commuting - set your day shift 8 hours daily that best suits you and your family plus overtime Must be able to work day shift and have a desire to get home for dinner Monday -Friday Must enjoy working in an air-conditioned state of the art location Pay Rate$46 hrly plus benefits overtime after 40 hours must pass a criminal checkDo you have experience working as an electro-mechanic in an Industrial environment and are looking for a great opportunity with a manufacturing leader in Barrie We have an amazing opportunity located in Barrie for 433a/442a Industrial Millwright/Industrial Electrician:Main Responsibilities:- Reads blueprints and schematic drawings- Strong troubleshooting skills of hydraulic and pneumatic components- Works with a wide array of precision tools, such as Vernier Calipers, micrometers, dial indicators, gauge blocks, OD tapes- Performs and assists in the preventative and predictive maintenance of PVC extrusion machinery and equipment- Works with other trades’ groups and contractors to complete project assignments- Operates grinder, saw, lathe and milling machines to make customized parts or repairs.- Fabricates custom parts, fixtures and guarding by means of arc welding, grinding, oxyacetylene cutting.- Assembles and installs machinery and equipment such as mixers, saws, pullers, precision bearings, gear boxes, clutches, motors, shafts, sprockets, chains, conveyors etc.Advantages- Competitive pay rate- Permanent hire- Excellent work conditionsQualifications- Ontario Licensed Millwright certificate is required (433a)- Ontario Licensed Electrician certificate is required (442a)- Minimum of 5 years’ in industrial electrical/ mechanical maintenance, troubleshooting and repairs- Ability to operate forklifts and aerial lifts - Previous relevant experiences in the plastics industry or food industry or automotive industry - Able to work day shift - you can pick the times that are good for you and your family - Read, write, understand and communicate effectively in English- Ability to work independently with minimum supervision- Ability to work at heights and in enclosed spaces- Ability to lift up to 50 lbsAdditionally, if you don’t feel this Barrie-based dual license millwright/electrician position is the right job for you, but know of someone that would be a great fit – pass them along! We offer a competitive referral program for helping that friend, family member, or colleague find the right job.how to apply : go to Randstad.ca apply directly to the open role or email bonniesue.cuppage@randstad.caor CALL: (705)735-1106AdvantagesAdvantages- Competitive pay rate $46 hrly overtime after 40 hours - Permanent hire- Excellent work conditions- working day shifts QualificationsQualificationsDual tickets - Ontario Licensed Millwright certificate is required (433a)- Ontario Licensed Electrician certificate is required (442a)(309a)- Minimum of 5 years’ in industrial mechanical maintenance, troubleshooting and repairs- Ability to operate forklifts and aerial lifts - Previous relevant experiences in the extrusion industry or automotive industry - Able to work day shift - you can pick the times that are good for you and your family - Read, write, understand and communicate effectively in English- Ability to work independently with minimum supervision- Ability to work at heights and in enclosed spaces- Ability to lift up to 50 lbsAdditionally, if you don’t feel this Barrie-based dual license millwright/electrician position is the right job for you, but know of someone that would be a great fit – pass them along! We offer a competitive referral program for helping that friend, family member, or colleague find the right job.how to apply: go to Randstad.ca apply directly to the open role or email bonniesue.cuppage@randstad.caor CALL: (705)735-1106Bonnie,Lorna,Avery,PriyaPhone Number:705.735.1106Fax Number:705.735.6346AdvantagesAdvantages- Competitive pay rate $46 hrly - Permanent hire- Excellent work conditions- working day shiftsResponsibilitiesMain Responsibilities:- Reads blueprints and schematic drawings- Strong troubleshooting skills of hydraulic and pneumatic components- Works with a wide array of precision tools, such as Vernier Calipers, micrometers, dial indicators, gauge blocks, OD tapes- Performs and assists in the preventative and predictive maintenance of PVC extrusion machinery and equipment- Works with other trades’ groups and contractors to complete project assignments- Operates grinder, saw, lathe and milling machines to make customized parts or repairs.- Fabricates custom parts, fixtures and guarding by means of arc welding, grinding, oxyacetylene cutting.- Assembles and installs machinery and equipment such as mixers, saws, pullers, precision bearings, gear boxes, clutches, motors, shafts, sprockets, chains, conveyors etc.QualificationsQualificationsDual tickets - Ontario Licensed Millwright certificate is required (433a)- Ontario Licensed Electrician certificate is required (442a)(309a)- Minimum of 5 years’ in industrial mechanical maintenance, troubleshooting and repairs- Ability to operate forklifts and aerial lifts - Previous relevant experiences in the extrusion industry or automotive industry - Able to work day shift - you can pick the times that are good for you and your family - Read, write, understand and communicate effectively in English- Ability to work independently with minimum supervision- Ability to work at heights and in enclosed spaces- Ability to lift up to 50 lbsAdditionally, if you don’t feel this Barrie-based dual license millwright/electrician position is the right job for you, but know of someone that would be a great fit – pass them along! We offer a competitive referral program for helping that friend, family member, or colleague find the right job.how to apply: go to Randstad.ca apply directly to the open role or email bonniesue.cuppage@randstad.caor CALL: (705)735-1106SummaryDo you have a 433A Industrial Millwright AND 442a Industrial Electrician license and looking for a position within the Barrie area Are you an Industrial Millwright with Electrical background please apply No more commuting - set your day shift 8 hours daily that best suits you and your family plus overtime Must be able to work day shift and have a desire to get home for dinner Monday -Friday Must enjoy working in an air-conditioned state of the art location Pay Rate$46 hrly plus benefits overtime after 40 hours must pass a criminal checkDo you have experience working as an electro-mechanic in an Industrial environment and are looking for a great opportunity with a manufacturing leader in Barrie
        Do you have a Dual Ticket - 433A Industrial Millwright AND 442a Industrial Electrician license and looking for a position within the Barrie area . No more commuting - set your day shift 8 hours daily that best suits you and your family plus overtime Must be able to work day shift and have a desire to get home for dinner Monday -Friday Must enjoy working in an air-conditioned state of the art location Pay Rate$46 hrly plus benefits overtime after 40 hours must pass a criminal checkDo you have experience working as an electro-mechanic in an Industrial environment and are looking for a great opportunity with a manufacturing leader in Barrie We have an amazing opportunity located in Barrie for 433a/442a Industrial Millwright/Industrial Electrician:Main Responsibilities:- Reads blueprints and schematic drawings- Strong troubleshooting skills of hydraulic and pneumatic components- Works with a wide array of precision tools, such as Vernier Calipers, micrometers, dial indicators, gauge blocks, OD tapes- Performs and assists in the preventative and predictive maintenance of PVC extrusion machinery and equipment- Works with other trades’ groups and contractors to complete project assignments- Operates grinder, saw, lathe and milling machines to make customized parts or repairs.- Fabricates custom parts, fixtures and guarding by means of arc welding, grinding, oxyacetylene cutting.- Assembles and installs machinery and equipment such as mixers, saws, pullers, precision bearings, gear boxes, clutches, motors, shafts, sprockets, chains, conveyors etc.Advantages- Competitive pay rate- Permanent hire- Excellent work conditionsQualifications- Ontario Licensed Millwright certificate is required (433a)- Ontario Licensed Electrician certificate is required (442a)- Minimum of 5 years’ in industrial electrical/ mechanical maintenance, troubleshooting and repairs- Ability to operate forklifts and aerial lifts - Previous relevant experiences in the plastics industry or food industry or automotive industry - Able to work day shift - you can pick the times that are good for you and your family - Read, write, understand and communicate effectively in English- Ability to work independently with minimum supervision- Ability to work at heights and in enclosed spaces- Ability to lift up to 50 lbsAdditionally, if you don’t feel this Barrie-based dual license millwright/electrician position is the right job for you, but know of someone that would be a great fit – pass them along! We offer a competitive referral program for helping that friend, family member, or colleague find the right job.how to apply : go to Randstad.ca apply directly to the open role or email bonniesue.cuppage@randstad.caor CALL: (705)735-1106AdvantagesAdvantages- Competitive pay rate $46 hrly overtime after 40 hours - Permanent hire- Excellent work conditions- working day shifts QualificationsQualificationsDual tickets - Ontario Licensed Millwright certificate is required (433a)- Ontario Licensed Electrician certificate is required (442a)(309a)- Minimum of 5 years’ in industrial mechanical maintenance, troubleshooting and repairs- Ability to operate forklifts and aerial lifts - Previous relevant experiences in the extrusion industry or automotive industry - Able to work day shift - you can pick the times that are good for you and your family - Read, write, understand and communicate effectively in English- Ability to work independently with minimum supervision- Ability to work at heights and in enclosed spaces- Ability to lift up to 50 lbsAdditionally, if you don’t feel this Barrie-based dual license millwright/electrician position is the right job for you, but know of someone that would be a great fit – pass them along! We offer a competitive referral program for helping that friend, family member, or colleague find the right job.how to apply: go to Randstad.ca apply directly to the open role or email bonniesue.cuppage@randstad.caor CALL: (705)735-1106Bonnie,Lorna,Avery,PriyaPhone Number:705.735.1106Fax Number:705.735.6346AdvantagesAdvantages- Competitive pay rate $46 hrly - Permanent hire- Excellent work conditions- working day shiftsResponsibilitiesMain Responsibilities:- Reads blueprints and schematic drawings- Strong troubleshooting skills of hydraulic and pneumatic components- Works with a wide array of precision tools, such as Vernier Calipers, micrometers, dial indicators, gauge blocks, OD tapes- Performs and assists in the preventative and predictive maintenance of PVC extrusion machinery and equipment- Works with other trades’ groups and contractors to complete project assignments- Operates grinder, saw, lathe and milling machines to make customized parts or repairs.- Fabricates custom parts, fixtures and guarding by means of arc welding, grinding, oxyacetylene cutting.- Assembles and installs machinery and equipment such as mixers, saws, pullers, precision bearings, gear boxes, clutches, motors, shafts, sprockets, chains, conveyors etc.QualificationsQualificationsDual tickets - Ontario Licensed Millwright certificate is required (433a)- Ontario Licensed Electrician certificate is required (442a)(309a)- Minimum of 5 years’ in industrial mechanical maintenance, troubleshooting and repairs- Ability to operate forklifts and aerial lifts - Previous relevant experiences in the extrusion industry or automotive industry - Able to work day shift - you can pick the times that are good for you and your family - Read, write, understand and communicate effectively in English- Ability to work independently with minimum supervision- Ability to work at heights and in enclosed spaces- Ability to lift up to 50 lbsAdditionally, if you don’t feel this Barrie-based dual license millwright/electrician position is the right job for you, but know of someone that would be a great fit – pass them along! We offer a competitive referral program for helping that friend, family member, or colleague find the right job.how to apply: go to Randstad.ca apply directly to the open role or email bonniesue.cuppage@randstad.caor CALL: (705)735-1106SummaryDo you have a 433A Industrial Millwright AND 442a Industrial Electrician license and looking for a position within the Barrie area Are you an Industrial Millwright with Electrical background please apply No more commuting - set your day shift 8 hours daily that best suits you and your family plus overtime Must be able to work day shift and have a desire to get home for dinner Monday -Friday Must enjoy working in an air-conditioned state of the art location Pay Rate$46 hrly plus benefits overtime after 40 hours must pass a criminal checkDo you have experience working as an electro-mechanic in an Industrial environment and are looking for a great opportunity with a manufacturing leader in Barrie
        • Burlington, Ontario
        • Permanent
        Are you looking for an opportunity as a Millwright in a Manufacturing facility, in Burlington, ON?Does a long term challenging career, in Packaging - with huge opportunity for growth sound like you're excited about?We have a really exciting opportunity for a Millwright, that we would love to share!Check out below!AdvantagesWhat’s in it for you?- $35/hour (non-union)- 2 shifts available- Monday to Friday, straight afternoon shift 3:00 pm - 11:15 pm- $0.50 shift premium on afternoons- Sunday night to Friday morning, straight night shift 11:00 pm - 7:15 am- $1 shift premium on nights + $6 additional premium- Benefits plan offered- 2 weeks vacation- RRSP up to 4% matching- Company uniform givenResponsibilitiesWhat will you be doing?- Mix of both preventative and breakdown maintenance as required- Troubleshooting of packaging lines such as conveyors, labelers, mixers, weighted tables, fillers, etc.- Be prepared to work on emergency breakdowns as required- Repairs to automated systems and equipment such as PLCs, Robotics, etc.QualificationsWho are we looking for?- Preference given to Licensed 433A Millwrights- Open to maintenance mechanics with 10+ years experience- Looking for long-term employment in a fast paced environment, with overtime available- Experienced with both older and newer machine shop equipment- Previous experience in an automated environments, such as food or pharmaceutical ideal- Ideal candidate is outgoing, open to learning, and is not afraid to ask questions- Understanding and knowledge of GMP's an assetSummaryTo apply:CALL 905.528.3400 ext 2, Ask for Mercedes and or VanessaEmail resume to: mercedes.siena@randstad.caLinkedin: https://www.linkedin.com/in/mercedes-siena/Vanessa,MercedesPhone Number:905.528.3400 ext 2
        Are you looking for an opportunity as a Millwright in a Manufacturing facility, in Burlington, ON?Does a long term challenging career, in Packaging - with huge opportunity for growth sound like you're excited about?We have a really exciting opportunity for a Millwright, that we would love to share!Check out below!AdvantagesWhat’s in it for you?- $35/hour (non-union)- 2 shifts available- Monday to Friday, straight afternoon shift 3:00 pm - 11:15 pm- $0.50 shift premium on afternoons- Sunday night to Friday morning, straight night shift 11:00 pm - 7:15 am- $1 shift premium on nights + $6 additional premium- Benefits plan offered- 2 weeks vacation- RRSP up to 4% matching- Company uniform givenResponsibilitiesWhat will you be doing?- Mix of both preventative and breakdown maintenance as required- Troubleshooting of packaging lines such as conveyors, labelers, mixers, weighted tables, fillers, etc.- Be prepared to work on emergency breakdowns as required- Repairs to automated systems and equipment such as PLCs, Robotics, etc.QualificationsWho are we looking for?- Preference given to Licensed 433A Millwrights- Open to maintenance mechanics with 10+ years experience- Looking for long-term employment in a fast paced environment, with overtime available- Experienced with both older and newer machine shop equipment- Previous experience in an automated environments, such as food or pharmaceutical ideal- Ideal candidate is outgoing, open to learning, and is not afraid to ask questions- Understanding and knowledge of GMP's an assetSummaryTo apply:CALL 905.528.3400 ext 2, Ask for Mercedes and or VanessaEmail resume to: mercedes.siena@randstad.caLinkedin: https://www.linkedin.com/in/mercedes-siena/Vanessa,MercedesPhone Number:905.528.3400 ext 2
        • Toronto, Ontario
        • Permanent
        • $35.00 per hour
        Are you a licensed Millwright with extensive experience looking for an amazing career opportunity? Can you see yourself working for a leading company in their industry? Do you want your ideas and suggestions to make a difference in molding a company?Well, we have what you are looking for!Randstad is hiring a Millwright for the Etobicoke area. We are seeking someone with experience in the packaging industry. AdvantagesDAY SHIFTCompetitive compensation ( $35/HR ) Full Benefits package (includes extended health, dental, vision care, life insurance, RRSP, EAP, LTD etc.) Profit sharing scheme for all employees after a yearTeam focused environment, mentorship is top of mind with senior leadersOpportunity for growth and developmentResponsibilities- Maintain, troubleshoot and repair corrugated machines, flexo print equipment, gluer and wax cascader machinery- Perform root cause analysis of mechanical machinery issues- Fabricate components to be used in machinery upgrades, improvements and repair- Basic electrical troubleshooting of PLC controlled equipment- Communicate with machine operators to diagnose issuesQualifications- 433A Millwright license- 3 or more years mechanical maintenance experience in the corrugated or paper industry- Ability to read an interpret shop drawings and mechanical diagrams- Basic electrical troubleshooting of PLC controlled equipment-Valid Drivers License SummaryThis opportunity will not last long. Apply now!Here's how to apply:Sarah Dinis - sarah.dinis@randstad.ca905 866 7092
        Are you a licensed Millwright with extensive experience looking for an amazing career opportunity? Can you see yourself working for a leading company in their industry? Do you want your ideas and suggestions to make a difference in molding a company?Well, we have what you are looking for!Randstad is hiring a Millwright for the Etobicoke area. We are seeking someone with experience in the packaging industry. AdvantagesDAY SHIFTCompetitive compensation ( $35/HR ) Full Benefits package (includes extended health, dental, vision care, life insurance, RRSP, EAP, LTD etc.) Profit sharing scheme for all employees after a yearTeam focused environment, mentorship is top of mind with senior leadersOpportunity for growth and developmentResponsibilities- Maintain, troubleshoot and repair corrugated machines, flexo print equipment, gluer and wax cascader machinery- Perform root cause analysis of mechanical machinery issues- Fabricate components to be used in machinery upgrades, improvements and repair- Basic electrical troubleshooting of PLC controlled equipment- Communicate with machine operators to diagnose issuesQualifications- 433A Millwright license- 3 or more years mechanical maintenance experience in the corrugated or paper industry- Ability to read an interpret shop drawings and mechanical diagrams- Basic electrical troubleshooting of PLC controlled equipment-Valid Drivers License SummaryThis opportunity will not last long. Apply now!Here's how to apply:Sarah Dinis - sarah.dinis@randstad.ca905 866 7092
        • Brantford, Ontario
        • Permanent
        If you are a licensed Millwright or Electrician looking for a weekend shift in the Brantford area, look no further!We are searching for an individual to join an established organization that has continued its growth throughout the Pandemic. This role will challenge your troubleshooting abilities while working on CNC equipment, pneumatic and hydraulic equipment, conveyors, robotics, welding equipment and more.Advantages- $35.45 hourly PLUS weekend night shift premium of $1.60- company-paid benefits- regular wage increases- a lot of autonomy to do the job as you see fitResponsibilities- working with Servo Motor Controls- maintaining pneumatics and hydraulics equipment, conveyors, CNC equipment, VFD's, sensors, gears- troubleshooting Panasonic Robots- using PMexpert maintenance softwareQualifications- must be either a licensed Millwright or Electrician- strong communication and computer skills- creative troubleshooting abilities- reliable transportation as this position is not on a bus route in BrantfordSummaryIf you are interested in this role, there are many ways to apply. Call us at 519-763-7775 x2email your resume to stimsouthwest@randstad.ca
        If you are a licensed Millwright or Electrician looking for a weekend shift in the Brantford area, look no further!We are searching for an individual to join an established organization that has continued its growth throughout the Pandemic. This role will challenge your troubleshooting abilities while working on CNC equipment, pneumatic and hydraulic equipment, conveyors, robotics, welding equipment and more.Advantages- $35.45 hourly PLUS weekend night shift premium of $1.60- company-paid benefits- regular wage increases- a lot of autonomy to do the job as you see fitResponsibilities- working with Servo Motor Controls- maintaining pneumatics and hydraulics equipment, conveyors, CNC equipment, VFD's, sensors, gears- troubleshooting Panasonic Robots- using PMexpert maintenance softwareQualifications- must be either a licensed Millwright or Electrician- strong communication and computer skills- creative troubleshooting abilities- reliable transportation as this position is not on a bus route in BrantfordSummaryIf you are interested in this role, there are many ways to apply. Call us at 519-763-7775 x2email your resume to stimsouthwest@randstad.ca
        • Stratford, Ontario
        • Permanent
        Are you a certified millwright or electrician who is a born leader and wanting to take the next step in your career? I am recruiting for a straight day maintenance team leader role. The starting salary is $75,000 to $80,000.  My client is willing to perform a raise increase once they see what you can bring to the table. They are looking for someone that is a self-starter.  The perfect candidate would be someone that can work independently and make decisions on their own . Someone that is very organized and can schedule his team's day efficiently.  We are looking for that leader that can implement procedures, prevent as much downtime as possible and save the company money.   If this sounds like you read on! AdvantagesWhat is in it for you? - Straight day shift 7 am to 3:30 pm Monday to Friday - Benefits after the first day - paid by company- Boot and tool allowance - uniform program- and much moreResponsibilitiesYou would be responsible for:- planning the daily schedules of your maintenance team of 5 - managing maintenance systems, PM's - managing facility repairs- managing budgeting- preparing presentations, cost saving reports etcQualificationsDo you have what it takes?- strong leadership skills - holds a millwright or electrician licenses - can work independently - enjoys being on the floor and working alongside his team- strong computer/communication skills - has at least 1 year working in a leadership role previously SummaryIf this sounds like you, or, you would like to find out more information, please call us at 519-763-7775 x2, or send through a copy of your resume toamanda.demosthenous@randstad.caI look forward to discussing your career objectives with you.Our services will not ever be at a cost to you. Registration with Randstad offers you the benefit of our industry knowledge and client database which spans over many industries.Randstad is committed to helping you tackle the challenges and take advantage of promising career opportunities. Connect with us today to learn more about many positions we have to offer you.
        Are you a certified millwright or electrician who is a born leader and wanting to take the next step in your career? I am recruiting for a straight day maintenance team leader role. The starting salary is $75,000 to $80,000.  My client is willing to perform a raise increase once they see what you can bring to the table. They are looking for someone that is a self-starter.  The perfect candidate would be someone that can work independently and make decisions on their own . Someone that is very organized and can schedule his team's day efficiently.  We are looking for that leader that can implement procedures, prevent as much downtime as possible and save the company money.   If this sounds like you read on! AdvantagesWhat is in it for you? - Straight day shift 7 am to 3:30 pm Monday to Friday - Benefits after the first day - paid by company- Boot and tool allowance - uniform program- and much moreResponsibilitiesYou would be responsible for:- planning the daily schedules of your maintenance team of 5 - managing maintenance systems, PM's - managing facility repairs- managing budgeting- preparing presentations, cost saving reports etcQualificationsDo you have what it takes?- strong leadership skills - holds a millwright or electrician licenses - can work independently - enjoys being on the floor and working alongside his team- strong computer/communication skills - has at least 1 year working in a leadership role previously SummaryIf this sounds like you, or, you would like to find out more information, please call us at 519-763-7775 x2, or send through a copy of your resume toamanda.demosthenous@randstad.caI look forward to discussing your career objectives with you.Our services will not ever be at a cost to you. Registration with Randstad offers you the benefit of our industry knowledge and client database which spans over many industries.Randstad is committed to helping you tackle the challenges and take advantage of promising career opportunities. Connect with us today to learn more about many positions we have to offer you.
        • Ottawa, Ontario
        • Permanent
        • $35.00 - $36.00 per hour
        Do you currently have your 443a millwright Red Seal? Are you comfortable working with various departments to prioritize repairs and maintenance? Do you have previous experience running the maintenance department? Are you comfortable being a point of resource for all requests? The right candidate will be comfortable making decision, working with contractors, and providing input on prioritizing repairs and upgrades. Working with multiple departments, the priority is safety while working to keep production up. If this sounds like a challenge, then read on!Advantages•Monday-Friday day shift with an hourly wage of 35-36•Unionized position with annual wage increases•Benefits include health, vision, dental, and RRSP matching•All tools are provided in a locked work area•Overtime paid after 8 hours worked, occasional overtime on with occasional overtime on weekends•Vacation starting at 2 weeksResponsibilities•Maintain, troubleshoot, diagnose, and repair mechanical and electrical machinery•Troubleshoot PLC, hydraulic, and pneumatic equipment•Work with both production members as well as management to prioritize upgrades and shutdown service•Build relationships with contractors and other team leaders•Feel comfortable with occasional weldingQualifications•Hold a Red Seal as an Industrial Mechanic or Industrial Electrician•Ability to work independently on various equipment•Act as resource amongst the staff for all things maintenance related•Comfortable prioritizing repairs and ticketsSummaryAfter reading all of this, does this sound like the next challenge you are looking for? If so, then we want to hear from you!Please apply by:Visiting www.randstad.ca and applying through the posting Emailing us at: stimottawa@randstad.caCalling us at: 613.726.0220 ext 3 and ask for Tommy or NatachaWe appreciate all applications, however, only those who meet the requirements for the position of Journeyman Red Seal Millwright will be contacted. Did you know Randstad has a Facebook group for Skilled Trades opportunities in Ottawa? Add yourself to the group and be the first to find out about our latest opportunities! https://www.facebook.com/SkilledTradesOttawa
        Do you currently have your 443a millwright Red Seal? Are you comfortable working with various departments to prioritize repairs and maintenance? Do you have previous experience running the maintenance department? Are you comfortable being a point of resource for all requests? The right candidate will be comfortable making decision, working with contractors, and providing input on prioritizing repairs and upgrades. Working with multiple departments, the priority is safety while working to keep production up. If this sounds like a challenge, then read on!Advantages•Monday-Friday day shift with an hourly wage of 35-36•Unionized position with annual wage increases•Benefits include health, vision, dental, and RRSP matching•All tools are provided in a locked work area•Overtime paid after 8 hours worked, occasional overtime on with occasional overtime on weekends•Vacation starting at 2 weeksResponsibilities•Maintain, troubleshoot, diagnose, and repair mechanical and electrical machinery•Troubleshoot PLC, hydraulic, and pneumatic equipment•Work with both production members as well as management to prioritize upgrades and shutdown service•Build relationships with contractors and other team leaders•Feel comfortable with occasional weldingQualifications•Hold a Red Seal as an Industrial Mechanic or Industrial Electrician•Ability to work independently on various equipment•Act as resource amongst the staff for all things maintenance related•Comfortable prioritizing repairs and ticketsSummaryAfter reading all of this, does this sound like the next challenge you are looking for? If so, then we want to hear from you!Please apply by:Visiting www.randstad.ca and applying through the posting Emailing us at: stimottawa@randstad.caCalling us at: 613.726.0220 ext 3 and ask for Tommy or NatachaWe appreciate all applications, however, only those who meet the requirements for the position of Journeyman Red Seal Millwright will be contacted. Did you know Randstad has a Facebook group for Skilled Trades opportunities in Ottawa? Add yourself to the group and be the first to find out about our latest opportunities! https://www.facebook.com/SkilledTradesOttawa
        • Guelph, Ontario
        • Permanent
        I am looking for a licensed millwright, electrician or a dual ticketed team leader to run a maintenance team of 6 to 7 people. Are you comfortable working independently on an afternoon and night shift rotation? The shift is a Monday to Friday schedule, with some possible overtime on Saturdays. You would be expected to work 80% on the floor with the team and 20% in the office. If you are looking for the next step in your career this is the role for you!AdvantagesWhat's in it for you? - pay ranging from $37 to $42.50 plus shift premium and paid overtime after 40 hours - rotation of afternoons and nights every 2 weeks- paid sick and personal days - uniform program- lots of opportunity for growth and advancement - bonus potential every quarter - tool and boot allowance ResponsibilitiesDoes this sound like you? - able to assist with running a team of 6 to 7 maintenance millwrights, electricians and apprentices - perform install of new machinery and moving of old machinery throughout the plant- establish and implement new maintenance programs- assign work orders and update the log book upon completion - troubleshoot and repair machinery throughout the shift- train and implement new maintenance programs with the teamQualificationsDo you have what it takes for this role? -needs to be a licensed millwright or electrician- previous automotive or industrial experience is desired - experience troubleshooting CNC mills and lathes- working knowledge of PLC – Allen-Bradley, Siemens, Motoman ABB- has 1 + years supervisor experience SummaryIf this sounds like you, or, you would like to find out more information, please call us at 519-763-7775 x2, or send through a copy of your resume toamanda.demosthenous@randstad.caI look forward to discussing your career objectives with you.Referrals are always welcomed and appreciated.Our services will not ever be at a cost to you. Registration with Randstad offers you the benefit of our industry knowledge and client database which spans over many industries.Randstad is committed to helping you tackle the challenges and take advantage of promising career opportunities. Connect with us today to learn more about many positions we have to offer you.
        I am looking for a licensed millwright, electrician or a dual ticketed team leader to run a maintenance team of 6 to 7 people. Are you comfortable working independently on an afternoon and night shift rotation? The shift is a Monday to Friday schedule, with some possible overtime on Saturdays. You would be expected to work 80% on the floor with the team and 20% in the office. If you are looking for the next step in your career this is the role for you!AdvantagesWhat's in it for you? - pay ranging from $37 to $42.50 plus shift premium and paid overtime after 40 hours - rotation of afternoons and nights every 2 weeks- paid sick and personal days - uniform program- lots of opportunity for growth and advancement - bonus potential every quarter - tool and boot allowance ResponsibilitiesDoes this sound like you? - able to assist with running a team of 6 to 7 maintenance millwrights, electricians and apprentices - perform install of new machinery and moving of old machinery throughout the plant- establish and implement new maintenance programs- assign work orders and update the log book upon completion - troubleshoot and repair machinery throughout the shift- train and implement new maintenance programs with the teamQualificationsDo you have what it takes for this role? -needs to be a licensed millwright or electrician- previous automotive or industrial experience is desired - experience troubleshooting CNC mills and lathes- working knowledge of PLC – Allen-Bradley, Siemens, Motoman ABB- has 1 + years supervisor experience SummaryIf this sounds like you, or, you would like to find out more information, please call us at 519-763-7775 x2, or send through a copy of your resume toamanda.demosthenous@randstad.caI look forward to discussing your career objectives with you.Referrals are always welcomed and appreciated.Our services will not ever be at a cost to you. Registration with Randstad offers you the benefit of our industry knowledge and client database which spans over many industries.Randstad is committed to helping you tackle the challenges and take advantage of promising career opportunities. Connect with us today to learn more about many positions we have to offer you.
        • Ajax, Ontario
        • Permanent
        Are you an experienced Industrial Maintenance Mechanic/Millwright looking for an exciting new opportunity? Do you have experience diagnosing and troubleshooting robotic systems? Are you a hard worker looking for a long-term position with a growing, successful company?We are seeking an experienced Millwright to join a team for a reputable business located in Durham! The environment is bright, clean, and spacious, with new equipment and room for professional advancement.AdvantagesFull-time permanent positionSalary range negotiableEasily accessible location in AjaxSafe and clean work environmentCompetitive wages Profit-sharingComprehensive group health & dental benefit planEmployee training and developmentResponsibilitiesInspect, install, repair, and maintain industrial machinery and equipmentAble to operate machine shop equipmentWorking independently with help when neededBuild parts for machinery and equipmentMove and relocate machineryPerform regular preventative maintenance on machines and equipmentUse of PLC's to program and troubleshoot automated equipmentUse of robotic systems to program and troubleshootPerform highly diversified duties to repair and maintain automated production equipment.QualificationsDiploma in Electrical, Mechanical, Robotics or related field, an asset433a, an assetExperience in a manufacturing environmentExperience in troubleshooting and equipment maintenance of electrical, mechanical, pneumatic, hydraulic, and robotics problems on automated equipmentAbility to read and understand Operations Standards, blueprints, maintenance and equipment manuals, etc.PLC programming experience highly desirableSummaryInterested in hearing more about the position?Here's how to apply:- Send your resume to simone.kenney@randstad.ca- Call Simone at 647-616-7066- Visit randstad.ca and apply through the job postingIf this job is not for you but you’re interested in a career or position change, please reach out and let me know what you’re looking for! I specialize in Skilled Trades and Industrial Management roles such as Millwrights, Electricians, Welders, Machinists, and Supervisors from Scarborough to Durham Region and beyond. New positions open up all the time so even if your desired position isn’t available, let me know what roles interest you and I can help you find your next opportunity!
        Are you an experienced Industrial Maintenance Mechanic/Millwright looking for an exciting new opportunity? Do you have experience diagnosing and troubleshooting robotic systems? Are you a hard worker looking for a long-term position with a growing, successful company?We are seeking an experienced Millwright to join a team for a reputable business located in Durham! The environment is bright, clean, and spacious, with new equipment and room for professional advancement.AdvantagesFull-time permanent positionSalary range negotiableEasily accessible location in AjaxSafe and clean work environmentCompetitive wages Profit-sharingComprehensive group health & dental benefit planEmployee training and developmentResponsibilitiesInspect, install, repair, and maintain industrial machinery and equipmentAble to operate machine shop equipmentWorking independently with help when neededBuild parts for machinery and equipmentMove and relocate machineryPerform regular preventative maintenance on machines and equipmentUse of PLC's to program and troubleshoot automated equipmentUse of robotic systems to program and troubleshootPerform highly diversified duties to repair and maintain automated production equipment.QualificationsDiploma in Electrical, Mechanical, Robotics or related field, an asset433a, an assetExperience in a manufacturing environmentExperience in troubleshooting and equipment maintenance of electrical, mechanical, pneumatic, hydraulic, and robotics problems on automated equipmentAbility to read and understand Operations Standards, blueprints, maintenance and equipment manuals, etc.PLC programming experience highly desirableSummaryInterested in hearing more about the position?Here's how to apply:- Send your resume to simone.kenney@randstad.ca- Call Simone at 647-616-7066- Visit randstad.ca and apply through the job postingIf this job is not for you but you’re interested in a career or position change, please reach out and let me know what you’re looking for! I specialize in Skilled Trades and Industrial Management roles such as Millwrights, Electricians, Welders, Machinists, and Supervisors from Scarborough to Durham Region and beyond. New positions open up all the time so even if your desired position isn’t available, let me know what roles interest you and I can help you find your next opportunity!
        • Strathroy, Ontario
        • Permanent
        Maintenance Technician - $35.86 hourly - 4 Shift Rotation - StrathroyIf you're an Electrician or a Millwright who is looking for a new challenge then please consider this Maintenance Technician position in Strathroy, Ontario. If you're passionate about your trade and you love to learn new things, please consider this opportunity. This a large automotive manufacturing facility with unique processes with room to grow in your profession. They support tradespeople who are interested in pursuing their dual-ticket long-term.AdvantagesWhat's in it for you?•$34.77, $35.86 after 6 months. •4 RRSP Match•Health benefits •Long-term potential to train for dual tickets•4 shift rotation (1 week off in between)• Passionate teamResponsibilitiesWhat is required for the position?•RSLogicx500•Motoman robots•Electrical and hydraulic systems•Troubleshooting CNC•Blueprint reading• Cross-training• PLCsQualificationsWhat do you need to apply?•C of Q for Electrician OR Millwright. 422A, 309A, or 433A •An excellent attitude with a dedication to ongoing learningSummaryPlease apply directly to this posting or email your resume to tyler.withers@randstad.ca If you want to stay connected to a professional Recruiter feel free to:Email Tyler at Tyler.withers@randstad.caConnect on LinkedIn: https://www.linkedin.com/in/tyler-withers-a64791144/Follow us in Facebook: https://www.facebook.com/randstadlondon/Don't forget we do referral bonuses. If you think you know someone who might be interested in the position, a successful placement will lead to a bonus between $50 - $500.If this position isn't for you, we still want to hear from you. Give us a call at 519.679.0058 ext. 2 to let us know what kind of career opportunities you're seeking. We're dedicated to helping you find, prepare and grow into new careers. We look forward to hearing from you.
        Maintenance Technician - $35.86 hourly - 4 Shift Rotation - StrathroyIf you're an Electrician or a Millwright who is looking for a new challenge then please consider this Maintenance Technician position in Strathroy, Ontario. If you're passionate about your trade and you love to learn new things, please consider this opportunity. This a large automotive manufacturing facility with unique processes with room to grow in your profession. They support tradespeople who are interested in pursuing their dual-ticket long-term.AdvantagesWhat's in it for you?•$34.77, $35.86 after 6 months. •4 RRSP Match•Health benefits •Long-term potential to train for dual tickets•4 shift rotation (1 week off in between)• Passionate teamResponsibilitiesWhat is required for the position?•RSLogicx500•Motoman robots•Electrical and hydraulic systems•Troubleshooting CNC•Blueprint reading• Cross-training• PLCsQualificationsWhat do you need to apply?•C of Q for Electrician OR Millwright. 422A, 309A, or 433A •An excellent attitude with a dedication to ongoing learningSummaryPlease apply directly to this posting or email your resume to tyler.withers@randstad.ca If you want to stay connected to a professional Recruiter feel free to:Email Tyler at Tyler.withers@randstad.caConnect on LinkedIn: https://www.linkedin.com/in/tyler-withers-a64791144/Follow us in Facebook: https://www.facebook.com/randstadlondon/Don't forget we do referral bonuses. If you think you know someone who might be interested in the position, a successful placement will lead to a bonus between $50 - $500.If this position isn't for you, we still want to hear from you. Give us a call at 519.679.0058 ext. 2 to let us know what kind of career opportunities you're seeking. We're dedicated to helping you find, prepare and grow into new careers. We look forward to hearing from you.
        • Burlington, Ontario
        • Permanent
        Are you looking for a progressive role as a Millwright, who performs very important and imperative work on site, in a leader of their industry?Does straight afternoons, flexibility, and stability sound like something you've been looking for?Are you located in or near Burlington, ON, and looking for a tight knit team working environment?Check out below!AdvantagesWhat's in it for you?- Great pay, depending on experience- OT available and paid premiums after 40 hours- Monday to Friday- Afternoon shift is typically 2:15pm - 10:30pm - Must be flexible to work OT as needed. - Annual production incentive plan in place- Full benefits after probation - Medical, dental, vision++- RRSP matching up to 3% after 2 years- Company paid uniforms and cleaning- Boot allowance after 3 months- 2 weeks vacation, negotiable- Incredibly talented team, working with the best in the industryResponsibilitiesWhat will you be doing?- Ensure equipment is in good working order: hydraulics, electrical, pneumatics, and mechanical systems- Replace and repair bearings, seals, hoses- Coordinate and schedule maintenance activities to ensure orders can be completed to meet production needs- Record system downtime and repairs done through current maintenance systems- Plan, organize, transfer and install machines and equipment as per manufacturers instructions- Ensure routine checks are in compliance with ESA standards- Participate in quarterly inventory counts with entire teamQualificationsWho are we looking for?- 433A Licensed Millwright - apprentices welcome to apply!- Experience in manufacturing / heavy steel environment- Hydraulic systems and heavy equipment is essential- Forklift and overhead crane repair knowledge an asset- Experience with steel slitting an asset- Very sound knowledge of health and safety acts and regulations imperative- Cooperative, ethical and open minded people succeed in the environment- Attention to detail, observant and tenacious people have been successful SummaryTo apply:CALL 905.528.3400 ext 2, Ask for Mercedes or VanessaEmail resume to: mercedes.siena@randstad.caLinkedin: https://www.linkedin.com/in/mercedes-siena/Mercedes,Vanessa
        Are you looking for a progressive role as a Millwright, who performs very important and imperative work on site, in a leader of their industry?Does straight afternoons, flexibility, and stability sound like something you've been looking for?Are you located in or near Burlington, ON, and looking for a tight knit team working environment?Check out below!AdvantagesWhat's in it for you?- Great pay, depending on experience- OT available and paid premiums after 40 hours- Monday to Friday- Afternoon shift is typically 2:15pm - 10:30pm - Must be flexible to work OT as needed. - Annual production incentive plan in place- Full benefits after probation - Medical, dental, vision++- RRSP matching up to 3% after 2 years- Company paid uniforms and cleaning- Boot allowance after 3 months- 2 weeks vacation, negotiable- Incredibly talented team, working with the best in the industryResponsibilitiesWhat will you be doing?- Ensure equipment is in good working order: hydraulics, electrical, pneumatics, and mechanical systems- Replace and repair bearings, seals, hoses- Coordinate and schedule maintenance activities to ensure orders can be completed to meet production needs- Record system downtime and repairs done through current maintenance systems- Plan, organize, transfer and install machines and equipment as per manufacturers instructions- Ensure routine checks are in compliance with ESA standards- Participate in quarterly inventory counts with entire teamQualificationsWho are we looking for?- 433A Licensed Millwright - apprentices welcome to apply!- Experience in manufacturing / heavy steel environment- Hydraulic systems and heavy equipment is essential- Forklift and overhead crane repair knowledge an asset- Experience with steel slitting an asset- Very sound knowledge of health and safety acts and regulations imperative- Cooperative, ethical and open minded people succeed in the environment- Attention to detail, observant and tenacious people have been successful SummaryTo apply:CALL 905.528.3400 ext 2, Ask for Mercedes or VanessaEmail resume to: mercedes.siena@randstad.caLinkedin: https://www.linkedin.com/in/mercedes-siena/Mercedes,Vanessa
        • Woodstock, Ontario
        • Permanent
        Are you a certified millwright or electrician looking to take your career to the next level? Our client in the Ingersoll area is looking for an Assistant Maintenance Manager to join their team!This role is a permanent straight day shift from 7 am to 4 pm, salary is negotiable. If this role sounds interesting, or you feel like you qualify, please read on!AdvantagesWhat's in it for you? - straight days 7 am to 4 pm mon to fri - an opportunity to take your career to the next level- benefits on the first day- vacation is negotiable- paid sick and personal days - very competitive salary - the culture feels like a family feel, with lots of fun planned events - uniforms provided - RRSP matching and contribution payment twice a year ResponsibilitiesAre you the perfect candidate for this role? - manage the daily performance of all maintenance team members, both hourly and salary up to 30 to 35 personnel - lead the preventative maintenance program for two facilities- ensure that the maintenance team is meeting all customer requirements- schedule, support and source contractors for various jobs- troubleshooting critical issues - support and lead a team to success QualificationsDo you have what it takes? - must be a certified millwright or electrician - has 5 + years experience leading a team of Skilled Trades persons- minimum 5 years of experience in an industrial environment – automotive considered an asset- can demonstrate strong mentoring and leadership skills SummaryIf this sounds like you, or, you would like to find out more information, please call us at 519-763-7775 x2, or send through a copy of your resume toamanda.demosthenous@randstad.caI look forward to discussing your career objectives with you.Referrals are always welcomed and appreciated.Our services will not ever be at a cost to you. Registration with Randstad offers you the benefit of our industry knowledge and client database which spans over many industries.Randstad is committed to helping you tackle the challenges and take advantage of promising career opportunities. Connect with us today to learn more about many positions we have to offer you.
        Are you a certified millwright or electrician looking to take your career to the next level? Our client in the Ingersoll area is looking for an Assistant Maintenance Manager to join their team!This role is a permanent straight day shift from 7 am to 4 pm, salary is negotiable. If this role sounds interesting, or you feel like you qualify, please read on!AdvantagesWhat's in it for you? - straight days 7 am to 4 pm mon to fri - an opportunity to take your career to the next level- benefits on the first day- vacation is negotiable- paid sick and personal days - very competitive salary - the culture feels like a family feel, with lots of fun planned events - uniforms provided - RRSP matching and contribution payment twice a year ResponsibilitiesAre you the perfect candidate for this role? - manage the daily performance of all maintenance team members, both hourly and salary up to 30 to 35 personnel - lead the preventative maintenance program for two facilities- ensure that the maintenance team is meeting all customer requirements- schedule, support and source contractors for various jobs- troubleshooting critical issues - support and lead a team to success QualificationsDo you have what it takes? - must be a certified millwright or electrician - has 5 + years experience leading a team of Skilled Trades persons- minimum 5 years of experience in an industrial environment – automotive considered an asset- can demonstrate strong mentoring and leadership skills SummaryIf this sounds like you, or, you would like to find out more information, please call us at 519-763-7775 x2, or send through a copy of your resume toamanda.demosthenous@randstad.caI look forward to discussing your career objectives with you.Referrals are always welcomed and appreciated.Our services will not ever be at a cost to you. Registration with Randstad offers you the benefit of our industry knowledge and client database which spans over many industries.Randstad is committed to helping you tackle the challenges and take advantage of promising career opportunities. Connect with us today to learn more about many positions we have to offer you.
        • Kitchener, Ontario
        • Permanent
        Are you an experienced cnc machinist looking for a new opportunity in the Tri City area?Do you have experience working with cnc lathe and mill machines?Do you have experience with tight tolerances and working with fanuc controls?If so, apply today!We are looking for a cnc machinist for the afternoon shift for a 6-12 month contract. Advantages- straight afternoon shift (3:00 pm – 11:00 pm)- $27.59/hr- additional $3.00 /hr for running a combined number of machines!- team atmosphere- overtime opportunity - uniforms provided - work within a smaller team of 3-4 on scheduled shift- potential to become full time - advancement potential – company hires from within!Responsibilities-working with hand tools such as tape measures and micrometers-setting up and operating 2 lathe machines-running a combined number of machines -maintaining a safe work environment -interpreting and reading blueprints -ability to work with long cycle times (from 45 minutes to 18 hours)Qualifications-5 + years’ experience operating a cnc lathe and milling machine -strong previous experience with tight tolerances-experienced with fanuc controls -previous experience in aerospace sector is a bonus! -ability to operate an overhead crane -clear criminal recordSummaryIf you are interested in this opportunity, there are several ways for you to apply.- call us at 519-763-7775 x2- email us at stimsouthwest@randstad.ca- apply online at randstad.caInterested, but not quite what you are looking for? Give us a call to discuss what you are looking for from your career in Skilled Trades. We speak with a variety of organizations in many different industries daily, focusing on Millwright, Electrician, Machine Builder, Tool & Die Maker and Welder/Fitters. We look forward to hearing from you.
        Are you an experienced cnc machinist looking for a new opportunity in the Tri City area?Do you have experience working with cnc lathe and mill machines?Do you have experience with tight tolerances and working with fanuc controls?If so, apply today!We are looking for a cnc machinist for the afternoon shift for a 6-12 month contract. Advantages- straight afternoon shift (3:00 pm – 11:00 pm)- $27.59/hr- additional $3.00 /hr for running a combined number of machines!- team atmosphere- overtime opportunity - uniforms provided - work within a smaller team of 3-4 on scheduled shift- potential to become full time - advancement potential – company hires from within!Responsibilities-working with hand tools such as tape measures and micrometers-setting up and operating 2 lathe machines-running a combined number of machines -maintaining a safe work environment -interpreting and reading blueprints -ability to work with long cycle times (from 45 minutes to 18 hours)Qualifications-5 + years’ experience operating a cnc lathe and milling machine -strong previous experience with tight tolerances-experienced with fanuc controls -previous experience in aerospace sector is a bonus! -ability to operate an overhead crane -clear criminal recordSummaryIf you are interested in this opportunity, there are several ways for you to apply.- call us at 519-763-7775 x2- email us at stimsouthwest@randstad.ca- apply online at randstad.caInterested, but not quite what you are looking for? Give us a call to discuss what you are looking for from your career in Skilled Trades. We speak with a variety of organizations in many different industries daily, focusing on Millwright, Electrician, Machine Builder, Tool & Die Maker and Welder/Fitters. We look forward to hearing from you.
        • Scarborough, Ontario
        • Permanent
        • $63,000 - $65,000 per year
        Are you a production supervisor looking for the next step in your career, with experience in a packaging or food manufacturing setting? Are you passionate about continuous improvement initiatives with a love for managing people, while implementing new processes? Are you an excellent communicator, who is motivated by providing support with a clear vision to your peers to reach company goals? If you’re ready to make the move in respect to your dream career in production, then check out what we have in store for you below!AdvantagesWhat’s in it for you? - Salary: $62,000 to $65,000 - Shift: Afternoon Shift 3pm-11pm (Training on day shift)- Company-paid Benefits 100%- 3 weeks of vacation - RRSP incentive- Clean, well-maintained facility - Parking on site - Located in Scarborough ResponsibilitiesWhat would your day look like as a production supervisor?- Supervising, motivate and lead a team of production associates - Study production schedules and estimate time requirements for completion of job assignments- Recommend continuous improvement initiatives to better production methods, equipment performance and quality of products - Create, track and analyze production runs, meeting KPIs QualificationsWho are we looking for? - 3-5 years in a manufacturing supervisory role, preferably in a food or packaging setting - Experience in a unionized manufacturing environment- Excellent communication and organization skills- Ability to work under pressureSummarynterested in hearing more? Let us know by… Visiting www.randstad.ca and apply through the postingApplying by e-mail at: wayne.desouza@@randstad.caCalling us at: 905-470-4248 and asking for WayneConnecting with me via Linked In: www.linkedin.com/in/waynedesouzaPlease check out www.randstad.ca for all of the roles currently open at Randstad! If this isn’t exactly what you are looking for, please let us know what you’re looking for and we would be happy to assist you in finding your dream career in skilled trades! We cover all of York Region including Scarborough, Markham, Vaughan, Concord, North York, and Newmarket. If you are looking for a role as a millwright (433a), electrician (309a or 442a), tool and die maker, machinist (manual or CNC), production supervisor, stamping press operator, or welder give us a call!
        Are you a production supervisor looking for the next step in your career, with experience in a packaging or food manufacturing setting? Are you passionate about continuous improvement initiatives with a love for managing people, while implementing new processes? Are you an excellent communicator, who is motivated by providing support with a clear vision to your peers to reach company goals? If you’re ready to make the move in respect to your dream career in production, then check out what we have in store for you below!AdvantagesWhat’s in it for you? - Salary: $62,000 to $65,000 - Shift: Afternoon Shift 3pm-11pm (Training on day shift)- Company-paid Benefits 100%- 3 weeks of vacation - RRSP incentive- Clean, well-maintained facility - Parking on site - Located in Scarborough ResponsibilitiesWhat would your day look like as a production supervisor?- Supervising, motivate and lead a team of production associates - Study production schedules and estimate time requirements for completion of job assignments- Recommend continuous improvement initiatives to better production methods, equipment performance and quality of products - Create, track and analyze production runs, meeting KPIs QualificationsWho are we looking for? - 3-5 years in a manufacturing supervisory role, preferably in a food or packaging setting - Experience in a unionized manufacturing environment- Excellent communication and organization skills- Ability to work under pressureSummarynterested in hearing more? Let us know by… Visiting www.randstad.ca and apply through the postingApplying by e-mail at: wayne.desouza@@randstad.caCalling us at: 905-470-4248 and asking for WayneConnecting with me via Linked In: www.linkedin.com/in/waynedesouzaPlease check out www.randstad.ca for all of the roles currently open at Randstad! If this isn’t exactly what you are looking for, please let us know what you’re looking for and we would be happy to assist you in finding your dream career in skilled trades! We cover all of York Region including Scarborough, Markham, Vaughan, Concord, North York, and Newmarket. If you are looking for a role as a millwright (433a), electrician (309a or 442a), tool and die maker, machinist (manual or CNC), production supervisor, stamping press operator, or welder give us a call!
        • Stratford, Ontario
        • Permanent
        Are you an experienced machinist looking for a new opportunity in the Stratford, ON area?Do you have experience working with 3 and 5 axis Haas Machining Centers?Do you have excellent blueprint reading skills?If so, apply today!We are looking for a machinist to join a metal fabrication company on a full time day shift role.Advantages- straight day shift (7:00 am - 3:30 pm)- $25.00 - $30.00 hourly rate (pending experience)- team atmosphere- family owned business- overtime opportunity - uniforms provided - 3 paid sick days- benefits paid by the company - this is a new department!- work within a smaller team of 3 on scheduled shift- be involved in decision making– such as tooling to order!- work for a supervisor who is knowledgeable about the equipment and trade Responsibilities-working with hand tools such as tape measures and micrometers-setting up and operating Haas Automation machines -maintaining a safe work environment -interpreting and reading blueprints Qualifications-4+ years as a machinist -previous experience with Haas machining centers-experienced with 3 and 5 axis machines -previous experience in a metal fabrication shop SummaryIf you are interested in this opportunity, there are several ways for you to apply.- call us at 519-763-7775 x2- email us at stimsouthwest@randstad.ca- apply online at randstad.caInterested, but not quite what you are looking for? Give us a call to discuss what you are looking for from your career in Skilled Trades. We speak with a variety of organizations in many different industries daily, focusing on Millwright, Electrician, Machine Builder, Tool & Die Maker and Welder/Fitters. We look forward to hearing from you.
        Are you an experienced machinist looking for a new opportunity in the Stratford, ON area?Do you have experience working with 3 and 5 axis Haas Machining Centers?Do you have excellent blueprint reading skills?If so, apply today!We are looking for a machinist to join a metal fabrication company on a full time day shift role.Advantages- straight day shift (7:00 am - 3:30 pm)- $25.00 - $30.00 hourly rate (pending experience)- team atmosphere- family owned business- overtime opportunity - uniforms provided - 3 paid sick days- benefits paid by the company - this is a new department!- work within a smaller team of 3 on scheduled shift- be involved in decision making– such as tooling to order!- work for a supervisor who is knowledgeable about the equipment and trade Responsibilities-working with hand tools such as tape measures and micrometers-setting up and operating Haas Automation machines -maintaining a safe work environment -interpreting and reading blueprints Qualifications-4+ years as a machinist -previous experience with Haas machining centers-experienced with 3 and 5 axis machines -previous experience in a metal fabrication shop SummaryIf you are interested in this opportunity, there are several ways for you to apply.- call us at 519-763-7775 x2- email us at stimsouthwest@randstad.ca- apply online at randstad.caInterested, but not quite what you are looking for? Give us a call to discuss what you are looking for from your career in Skilled Trades. We speak with a variety of organizations in many different industries daily, focusing on Millwright, Electrician, Machine Builder, Tool & Die Maker and Welder/Fitters. We look forward to hearing from you.
        • Concord, Ontario
        • Permanent
        • $32.00 - $34.00 per hour
        Are you a licensed tool and die maker? Or do you have 5+ years of experience with a willingness to get licensed? With an amazing shift, competitive benefits, DPSP and RRSP programs, overtime and opportunities for advancement, this position is the one for you! While other companies are starting to slow, this organization is booming and growing rapidly and are hiring IMMEDIATELY! Check-out what else is in store for you… AdvantagesWhat’s in it for you? - Salary range: $32-33/hr(depending on experience) - Shift: Rotating – Days/Afternoons- Competitive benefits package - DPSP with company matching - RRSP with company matching - Overtime after 40 hours - Tool allowance - 2 weeks of vacation - Opportunities for advancement - Company provided uniform- Located in Concord ResponsibilitiesWhat would your day look like as a tool and die, maker? - Repair and troubleshoot, and make adjustments to transfer and progressive dies - Build new dies following lean manufacturing initiatives - Work independently and in a team setting, assisting other toolmakers and apprentices - Abide by all health and safety practices QualificationsWho would be an ideal candidate? - Licensed tool and die maker or 5+ years of experience in the trade (willing to be licensed) - Able to read and interpret blueprints and drawings - Strong troubleshooting experience with a focus on die repairs - Experience working with both transfer and progressive dies - Knowledge of lean manufacturing Summaryinterested in hearing more? Let us know by… Visiting www.randstad.ca and apply through the postingApplying by e-mail at: wayne.desouza@randstad.ca Calling us at: 905-470-4248 and asking for WaynePlease check out www.randstad.ca for all of the roles currently open at Randstad! If this isn’t exactly what you are looking for, please let us know what you’re looking for and we would be happy to assist you in finding your dream career in skilled trades! We cover all of York Region including Scarborough, Markham, Vaughan, Concord, Woodbridge, North York, and Newmarket. If you are looking for a role as a millwright (433a), electrician (309a or 442a), tool and die maker, machinist (manual or CNC), production supervisor, stamping press operator, or welder give us a call!Wayne,DylanPhone Number:905.470.4248
        Are you a licensed tool and die maker? Or do you have 5+ years of experience with a willingness to get licensed? With an amazing shift, competitive benefits, DPSP and RRSP programs, overtime and opportunities for advancement, this position is the one for you! While other companies are starting to slow, this organization is booming and growing rapidly and are hiring IMMEDIATELY! Check-out what else is in store for you… AdvantagesWhat’s in it for you? - Salary range: $32-33/hr(depending on experience) - Shift: Rotating – Days/Afternoons- Competitive benefits package - DPSP with company matching - RRSP with company matching - Overtime after 40 hours - Tool allowance - 2 weeks of vacation - Opportunities for advancement - Company provided uniform- Located in Concord ResponsibilitiesWhat would your day look like as a tool and die, maker? - Repair and troubleshoot, and make adjustments to transfer and progressive dies - Build new dies following lean manufacturing initiatives - Work independently and in a team setting, assisting other toolmakers and apprentices - Abide by all health and safety practices QualificationsWho would be an ideal candidate? - Licensed tool and die maker or 5+ years of experience in the trade (willing to be licensed) - Able to read and interpret blueprints and drawings - Strong troubleshooting experience with a focus on die repairs - Experience working with both transfer and progressive dies - Knowledge of lean manufacturing Summaryinterested in hearing more? Let us know by… Visiting www.randstad.ca and apply through the postingApplying by e-mail at: wayne.desouza@randstad.ca Calling us at: 905-470-4248 and asking for WaynePlease check out www.randstad.ca for all of the roles currently open at Randstad! If this isn’t exactly what you are looking for, please let us know what you’re looking for and we would be happy to assist you in finding your dream career in skilled trades! We cover all of York Region including Scarborough, Markham, Vaughan, Concord, Woodbridge, North York, and Newmarket. If you are looking for a role as a millwright (433a), electrician (309a or 442a), tool and die maker, machinist (manual or CNC), production supervisor, stamping press operator, or welder give us a call!Wayne,DylanPhone Number:905.470.4248
        • Concord, Ontario
        • Permanent
        • $70,000 - $75,000 per year
        Are you looking to work with a Dynamic employer? Are you looking to work closer to home?Look no further than the opportunity we have with one of our clients.Working on a Straight Night or Weekend Shift, this opportunity presents a clean, modern temperature-controlled environment with lots of exposure to the fast-growing Manufacturing division.AdvantagesAdvantages- Night OR Weekend Shift - Company paid Benefits 100%- Clean and Well Lit environment- $70-$75K annualResponsibilitiesThe Production Supervisor is responsible to lead a production team in meeting production targets, as well as assuring the proper functioning of the production process and the team. This position interacts with the Production Manager for day-to-day direction, training and achieving production targets. It also supervises and interacts with all of their assigned employees, lead-hands. This position is critical to the well-functioning and efficiency of the areas they supervise, and its employee’s safety. This position is in charge of all the work flow and employees of its assigned areaQualificationsQualifications- Having Experience within the Aluminum or Glass industry would be a definite asset- Being a proven leader and having the ability to lead and motivate a team of employees; having 3-5 years experience as shop/floor supervisor or lead-hand- Having a proactive approach towards work and towards continuous improvement- Having high level of prioritizing, job/task planning and organizing abilities- Having strong multi-tasking, decision-making and critical thinking abilities- Being able to tolerate some level of stress and to deal with fast pace and high and/or changing work/products demands- Having good ability and knowledge of computers and technology- Having demonstrated ability to follow safe work practicesSummaryinterested in hearing more? Let us know by… Visiting www.randstad.ca and apply through the postingApplying by e-mail at: wayne.desouza@randstad.ca Calling us at: 905-470-4248 and asking for WaynePlease check out www.randstad.ca for all of the roles currently open at Randstad! If this isn’t exactly what you are looking for, please let us know what you’re looking for and we would be happy to assist you in finding your dream career in skilled trades! We cover all of York Region including Scarborough, Markham, Vaughan, Concord, Woodbridge, North York, and Newmarket. If you are looking for a role as a millwright (433a), electrician (309a or 442a), tool and die maker, machinist (manual or CNC), production supervisor, stamping press operator, or welder give us a call!WaynePhone Number:289 387 1559
        Are you looking to work with a Dynamic employer? Are you looking to work closer to home?Look no further than the opportunity we have with one of our clients.Working on a Straight Night or Weekend Shift, this opportunity presents a clean, modern temperature-controlled environment with lots of exposure to the fast-growing Manufacturing division.AdvantagesAdvantages- Night OR Weekend Shift - Company paid Benefits 100%- Clean and Well Lit environment- $70-$75K annualResponsibilitiesThe Production Supervisor is responsible to lead a production team in meeting production targets, as well as assuring the proper functioning of the production process and the team. This position interacts with the Production Manager for day-to-day direction, training and achieving production targets. It also supervises and interacts with all of their assigned employees, lead-hands. This position is critical to the well-functioning and efficiency of the areas they supervise, and its employee’s safety. This position is in charge of all the work flow and employees of its assigned areaQualificationsQualifications- Having Experience within the Aluminum or Glass industry would be a definite asset- Being a proven leader and having the ability to lead and motivate a team of employees; having 3-5 years experience as shop/floor supervisor or lead-hand- Having a proactive approach towards work and towards continuous improvement- Having high level of prioritizing, job/task planning and organizing abilities- Having strong multi-tasking, decision-making and critical thinking abilities- Being able to tolerate some level of stress and to deal with fast pace and high and/or changing work/products demands- Having good ability and knowledge of computers and technology- Having demonstrated ability to follow safe work practicesSummaryinterested in hearing more? Let us know by… Visiting www.randstad.ca and apply through the postingApplying by e-mail at: wayne.desouza@randstad.ca Calling us at: 905-470-4248 and asking for WaynePlease check out www.randstad.ca for all of the roles currently open at Randstad! If this isn’t exactly what you are looking for, please let us know what you’re looking for and we would be happy to assist you in finding your dream career in skilled trades! We cover all of York Region including Scarborough, Markham, Vaughan, Concord, Woodbridge, North York, and Newmarket. If you are looking for a role as a millwright (433a), electrician (309a or 442a), tool and die maker, machinist (manual or CNC), production supervisor, stamping press operator, or welder give us a call!WaynePhone Number:289 387 1559
        • Gloucester, Ontario
        • Permanent
        • $24.00 - $27.00 per hour
        Are you mechanically minded and are looking for a place to start building your career? Do you have previous maintenance experience working as a heavy equipment mechanic, service technician, 310 mechanic, or millwright? Are you looking for a team that promotes from within and fosters a culture of learning and growing from within?We are currently looking for a Maintenance Technician to join a small team located in Ottawa. The right candidate will have a good knowledge of mechanics, hydraulics, pneumatics, pumps, and electrical. previous experience in a production, manufacturing, or similar facility is an asset. If this already sounds like something you want to do, then read on!Advantages•Permanent full time position•Monday- Friday day shift position•Some weekend work required, with weekend premiums offered•Salary of $24-$27 per hour based on experience•Uniforms are provided for and laundered by the company•Health, vision, dental, and RRSP matching offered•No requirement to bring in your personal tool, are tools are provided by the companyResponsibilities•Working within the team to maintain and repair industrial machinery•Communicate with other teams to ensure that equipment is repaired safely and promptly•Maintain accurate and detailed logs of all work completed•Be able to communicate effectively within the team to ensure work is completed properly and reach out for assistance with new projects•Working on various machinery both inside and outside of the facilityQualifications•Previous experience working as a mechanic, either professionally or personally•Have a valid driver’s license•Willing to learn new skills and take on challenges•Previous trades experience such as welding is an assetSummaryDoes this sound like the next challenge you want to take on? If so, apply by:Visiting www.randstad.ca and applying through the postingEmailing us at: stimottawa@randstad.caCalling us at: 613.726.0220 ext 3 and ask for Tommy or NatachaWe appreciate all applications, however, only those who meet the requirements for the position of Industrial Mechanic will be contacted.We do also staff for various permanent and contract opportunities. Please visit Randstad.ca to create a profile and upload your resume!Did you know that we have a Facebook page? Visit us at facebook.com/SkilledTradesOttawa to be the first to learn about new jobs, great tips, and all the resources to help you on your journey.
        Are you mechanically minded and are looking for a place to start building your career? Do you have previous maintenance experience working as a heavy equipment mechanic, service technician, 310 mechanic, or millwright? Are you looking for a team that promotes from within and fosters a culture of learning and growing from within?We are currently looking for a Maintenance Technician to join a small team located in Ottawa. The right candidate will have a good knowledge of mechanics, hydraulics, pneumatics, pumps, and electrical. previous experience in a production, manufacturing, or similar facility is an asset. If this already sounds like something you want to do, then read on!Advantages•Permanent full time position•Monday- Friday day shift position•Some weekend work required, with weekend premiums offered•Salary of $24-$27 per hour based on experience•Uniforms are provided for and laundered by the company•Health, vision, dental, and RRSP matching offered•No requirement to bring in your personal tool, are tools are provided by the companyResponsibilities•Working within the team to maintain and repair industrial machinery•Communicate with other teams to ensure that equipment is repaired safely and promptly•Maintain accurate and detailed logs of all work completed•Be able to communicate effectively within the team to ensure work is completed properly and reach out for assistance with new projects•Working on various machinery both inside and outside of the facilityQualifications•Previous experience working as a mechanic, either professionally or personally•Have a valid driver’s license•Willing to learn new skills and take on challenges•Previous trades experience such as welding is an assetSummaryDoes this sound like the next challenge you want to take on? If so, apply by:Visiting www.randstad.ca and applying through the postingEmailing us at: stimottawa@randstad.caCalling us at: 613.726.0220 ext 3 and ask for Tommy or NatachaWe appreciate all applications, however, only those who meet the requirements for the position of Industrial Mechanic will be contacted.We do also staff for various permanent and contract opportunities. Please visit Randstad.ca to create a profile and upload your resume!Did you know that we have a Facebook page? Visit us at facebook.com/SkilledTradesOttawa to be the first to learn about new jobs, great tips, and all the resources to help you on your journey.
        • Scarborough, Ontario
        • Permanent
        Are you a certified 442a Electrician with experience working in a controlled environment, such as food, pharma, or cosmetics? Are you looking for a new role where you can select your shift and benefits package? Are you interested in working for a company that values its employees, with monthly meetings to ensure success across the company? Then look no further, this position is for you!AdvantagesWhat’s in it for you? - Salary: $34.50/hr - Shift: Rotating Monthly* Day: 6am-3pm, Afternoon: 2-11pm, Night: 7pm-6am (shift premium= $0.50/hr)* Sunday shift premium = $1.00/hr - Benefits package – two options available with a full needs analysis assessment with HR upon hiring - 2 weeks of vacation (4% payout) - Bi-annual company events- Monthly “town hall” meetings and service awards for milestone events - Company provided uniform - Tool allowance - Workboot allowance- 3 paid sick days - Exclusive weekly “take-home” products available to all staff - Overtime is available on a voluntary basis - Located in Scarborough, minutes from the 401!ResponsibilitiesWhat would a typical day look like? - Perform preventative maintenance repairs of plant equipment through issued work orders- Ensure proper documentation of maintenance activities - Assist with movement of equipment and plant modifications- Abide by all company health and safety protocols and procedures - Perform all duties while in compliance with HACCP rulesQualificationsWho are we looking for? - Must possess 442 Industrial Electrician License- 2-3 years of experience working in an automated manufacturing facility - Knowledge of HACCP and GMP practices is considered an asset - Previous experience in a food/pharma/cosmetic setting is also considered an asset - Completion of OSSD or equivalentSummaryInterested in hearing more? Let us know by… Visiting www.randstad.ca and apply through the postingApplying by e-mail at: wayne.desouza@randstad.caCalling us at: 905-470-4248 and asking for WaynePlease check out www.randstad.ca for all of the roles currently open at Randstad! If this isn’t exactly what you are looking for, please let us know what you’re looking for and we would be happy to assist you in finding your dream career in skilled trades! We cover all of York Region including Scarborough, Markham, Vaughan, Concord, Woodbridge, North York, and Newmarket. If you are looking for a role as a millwright (433a), electrician (309a or 442a), tool and die maker, machinist (manual or CNC), production supervisor, or welder give us a call!
        Are you a certified 442a Electrician with experience working in a controlled environment, such as food, pharma, or cosmetics? Are you looking for a new role where you can select your shift and benefits package? Are you interested in working for a company that values its employees, with monthly meetings to ensure success across the company? Then look no further, this position is for you!AdvantagesWhat’s in it for you? - Salary: $34.50/hr - Shift: Rotating Monthly* Day: 6am-3pm, Afternoon: 2-11pm, Night: 7pm-6am (shift premium= $0.50/hr)* Sunday shift premium = $1.00/hr - Benefits package – two options available with a full needs analysis assessment with HR upon hiring - 2 weeks of vacation (4% payout) - Bi-annual company events- Monthly “town hall” meetings and service awards for milestone events - Company provided uniform - Tool allowance - Workboot allowance- 3 paid sick days - Exclusive weekly “take-home” products available to all staff - Overtime is available on a voluntary basis - Located in Scarborough, minutes from the 401!ResponsibilitiesWhat would a typical day look like? - Perform preventative maintenance repairs of plant equipment through issued work orders- Ensure proper documentation of maintenance activities - Assist with movement of equipment and plant modifications- Abide by all company health and safety protocols and procedures - Perform all duties while in compliance with HACCP rulesQualificationsWho are we looking for? - Must possess 442 Industrial Electrician License- 2-3 years of experience working in an automated manufacturing facility - Knowledge of HACCP and GMP practices is considered an asset - Previous experience in a food/pharma/cosmetic setting is also considered an asset - Completion of OSSD or equivalentSummaryInterested in hearing more? Let us know by… Visiting www.randstad.ca and apply through the postingApplying by e-mail at: wayne.desouza@randstad.caCalling us at: 905-470-4248 and asking for WaynePlease check out www.randstad.ca for all of the roles currently open at Randstad! If this isn’t exactly what you are looking for, please let us know what you’re looking for and we would be happy to assist you in finding your dream career in skilled trades! We cover all of York Region including Scarborough, Markham, Vaughan, Concord, Woodbridge, North York, and Newmarket. If you are looking for a role as a millwright (433a), electrician (309a or 442a), tool and die maker, machinist (manual or CNC), production supervisor, or welder give us a call!
        • North York, Ontario
        • Permanent
        • $70,000 per year
        Have you worked extensively in Metal Fabrication and processing?Do you have Roll Forming Experience?Are you motivated to succeed and drive a group of others to reach their very best?We are seeking an experienced and skilled individual with extensive experience in roll forming steel products. The Plant Supervisor will assist the Plant Manager on a variety of tasks to ensure day to day production requirements are being met. The main duties include setting up roll forming machines for part production, assisting with maintenance and tooling, assisting with production schedules and working with team leaders in their respective areas of production.ADVANTAGES:- Competitive Salary- Opportunity for Growth- Early finishes on Fridays - Community events- Full Benefits programRESPONSIBILITIES:- Set-up and maintaining Roll Forming Machines- Ensure day to day tasks are met - Assist with production schedules - Foster a team of growth and mentorship- Collaborate with leaders and team to ensure goals are met - Ensure all files and key information are kept up to dateQUALIFICATIONS:- 5+ years of experience in setting up roll forming machines for several different profiles and parts- Working knowledge of press brake and punch press machines- Ability to read and understand tooling designs and drawings- Basic computer skills such as the ability to use email and read/create PDF files- Strong teamwork skills and ability to take direction from others when required, also make decisions when required- Must be an active listener and open-minded when searching for solutions to problemsTo apply:Applying by e-mail at: dylan.lalta@randstad.caCalling us at: 905-470-4248 and asking for Dylan or WaynePlease check out www.randstad.ca for all of the roles currently open at Randstad! If this isn’t exactly what you are looking for, please let us know what you’re looking for and we would be happy to assist you in finding your dream career in skilled trades! We cover all of North York and Central Toronto and the York Region including Markham, Vaughan, Concord, North York, and Newmarket. If you are looking for a role as a millwright (433a), electrician (309a or 442a), tool and die maker, machinist (manual or CNC), production supervisor, stamping press operator, or welder give us a call!Advantages- Competitive Salary- Opportunity for Growth- Day Shift (7AM-4PM)- Early finishes- Community events- Full Benefits programResponsibilities- Set-up and maintaining Roll Forming Machines- Ensure day to day tasks are met - Assist with production schedules - Foster a team of growth and mentorship- Collaborate with leaders and team to ensure goals are met - Ensure all files and key information are kept up to dateQualifications- 5+ years of experience in setting up roll forming machines for several different profiles and parts- Working knowledge of press brake and punch press machines- Ability to read and understand tooling designs and drawings- Basic computer skills such as the ability to use email and read/create PDF files- Strong teamwork skills and ability to take direction from others when required, also make decisions when required- Must be an active listener and open-minded when searching for solutions to problemsSummaryHave you worked extensively in Metal Fabrication and processing?Do you have Roll Forming Experience?Are you motivated to succeed and drive a group of others to reach their very best?We are seeking an experienced and skilled individual with extensive experience in roll forming steel products. The Plant Supervisor will assist the Plant Manager on a variety of tasks to ensure day to day production requirements are being met. The main duties include setting up roll forming machines for part production, assisting with maintenance and tooling, assisting with production schedules and working with team leaders in their respective areas of production.
        Have you worked extensively in Metal Fabrication and processing?Do you have Roll Forming Experience?Are you motivated to succeed and drive a group of others to reach their very best?We are seeking an experienced and skilled individual with extensive experience in roll forming steel products. The Plant Supervisor will assist the Plant Manager on a variety of tasks to ensure day to day production requirements are being met. The main duties include setting up roll forming machines for part production, assisting with maintenance and tooling, assisting with production schedules and working with team leaders in their respective areas of production.ADVANTAGES:- Competitive Salary- Opportunity for Growth- Early finishes on Fridays - Community events- Full Benefits programRESPONSIBILITIES:- Set-up and maintaining Roll Forming Machines- Ensure day to day tasks are met - Assist with production schedules - Foster a team of growth and mentorship- Collaborate with leaders and team to ensure goals are met - Ensure all files and key information are kept up to dateQUALIFICATIONS:- 5+ years of experience in setting up roll forming machines for several different profiles and parts- Working knowledge of press brake and punch press machines- Ability to read and understand tooling designs and drawings- Basic computer skills such as the ability to use email and read/create PDF files- Strong teamwork skills and ability to take direction from others when required, also make decisions when required- Must be an active listener and open-minded when searching for solutions to problemsTo apply:Applying by e-mail at: dylan.lalta@randstad.caCalling us at: 905-470-4248 and asking for Dylan or WaynePlease check out www.randstad.ca for all of the roles currently open at Randstad! If this isn’t exactly what you are looking for, please let us know what you’re looking for and we would be happy to assist you in finding your dream career in skilled trades! We cover all of North York and Central Toronto and the York Region including Markham, Vaughan, Concord, North York, and Newmarket. If you are looking for a role as a millwright (433a), electrician (309a or 442a), tool and die maker, machinist (manual or CNC), production supervisor, stamping press operator, or welder give us a call!Advantages- Competitive Salary- Opportunity for Growth- Day Shift (7AM-4PM)- Early finishes- Community events- Full Benefits programResponsibilities- Set-up and maintaining Roll Forming Machines- Ensure day to day tasks are met - Assist with production schedules - Foster a team of growth and mentorship- Collaborate with leaders and team to ensure goals are met - Ensure all files and key information are kept up to dateQualifications- 5+ years of experience in setting up roll forming machines for several different profiles and parts- Working knowledge of press brake and punch press machines- Ability to read and understand tooling designs and drawings- Basic computer skills such as the ability to use email and read/create PDF files- Strong teamwork skills and ability to take direction from others when required, also make decisions when required- Must be an active listener and open-minded when searching for solutions to problemsSummaryHave you worked extensively in Metal Fabrication and processing?Do you have Roll Forming Experience?Are you motivated to succeed and drive a group of others to reach their very best?We are seeking an experienced and skilled individual with extensive experience in roll forming steel products. The Plant Supervisor will assist the Plant Manager on a variety of tasks to ensure day to day production requirements are being met. The main duties include setting up roll forming machines for part production, assisting with maintenance and tooling, assisting with production schedules and working with team leaders in their respective areas of production.

      thank you for subscribing to your personalised job alerts.

      It looks like you want to switch your language. This will reset your filters on your current job search.