thank you for subscribing to your personalised job alerts.

    9 jobs found for piping

    filter
    • sector
      working in
      show 9 jobs
      clear filter
    • location
      location & range
        show 9 jobs
        clear filter
      • job types
        job types
        show 9 jobs
        clear filter
        • Mississauga, Ontario
        • Permanent
        Do you have a strong background in HVAC and Piping design of Industrial facilities?Are you tired of being limited in the impact you have to your overall organization?Would the chance to work in a more dynamic atmosphere be appealing?If so, this could be the right opportunity for you!We are looking for a Mechanical Designer with experience in design of heavy industrial facilities.Ideal candidate will have experience working in a Consulting Engineering environment and have project experience with industrial plants or power generation facilities.Experience should include ventilation systems, piping, hvac, and pumping systems.Experience in Machine Design is also an asset.Should have exposure to high pressure hydraulics and pressure vessels.Experience in piping design and layout for water an asset.Stress Analysis of mechanical equipment an asset.Exposure to projects like steel, water / wastewater, refineries, power generation an asset.Candidate will be interfacing with clients so good verbal and written communication skills are important.Apply online, or email resume to Jill Ventura at Jill.Ventura@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.RESPONSIBILITIESQUALIFICATIONS
        Do you have a strong background in HVAC and Piping design of Industrial facilities?Are you tired of being limited in the impact you have to your overall organization?Would the chance to work in a more dynamic atmosphere be appealing?If so, this could be the right opportunity for you!We are looking for a Mechanical Designer with experience in design of heavy industrial facilities.Ideal candidate will have experience working in a Consulting Engineering environment and have project experience with industrial plants or power generation facilities.Experience should include ventilation systems, piping, hvac, and pumping systems.Experience in Machine Design is also an asset.Should have exposure to high pressure hydraulics and pressure vessels.Experience in piping design and layout for water an asset.Stress Analysis of mechanical equipment an asset.Exposure to projects like steel, water / wastewater, refineries, power generation an asset.Candidate will be interfacing with clients so good verbal and written communication skills are important.Apply online, or email resume to Jill Ventura at Jill.Ventura@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.RESPONSIBILITIESQUALIFICATIONS
        • Burnaby, British Columbia
        • Contract
        HVAC Mechanical EngineerThis is a HVAC Mechanical Engineer opportunity in BC. with the largest power distribution organization in British Columbia and been recognized for excellence and been named one of B.C.’s Top Employers and one of Canada’s Best Diversity Employers for four years in a row.This is a full time, two-year contract located in Burnaby, BC. We are looking for a HVAC Mechanical Engineer to provide HVAC Engineering services as both internally performed work or as owner's Engineer, while reviewing and accepting the HVAC engineering design work of the team. The HVAC Mechanical Engineer will work in a busy team that support all capital and maintenance work and attend to HVAC concerns on large generation projects. HVAC Mechanical Engineer Responsibilities:Experience and Role Accountabilities• A minimum eight (8) years of experience in a relevant engineering field or equivalent.• Must have a minimum of 7 years HVAC experience with at least 5 years in the industrial HVAC• Industrial HVAC design experience in hydroelectric generating stations is a significant asset.• Must have P.eng•Industrial HVAC design experience in hydroelectric generating stations.• An understanding of HVAC Codes of design such as ASHRAE, SMACNA.• An understanding of seismic design and how it applies to industrial systems• An understanding of the interfaces of the HVAC systems with the Fire Protection systems and the ability to work with Fire Protection Engineers to develop the design of the HVAC and smoke control systems.• An understanding of building automation systems/DDC systems.• Develop safe engineering solutions by using initiative and judgement to perform tasks including developing designs, analyzing and resolving problems, and interpreting engineering specifications on medium complexity and scope assignments for projects and operations.• Assist project or operations management to meet safety, cost, quality, and time objectives by proposing changes in plans and estimated costs, recommending payment for work completed by contractors, preparing progress reports, coordinating work schedules and other similar tasks.• Resolve highly technical and unusual design and field engineering problems by conducting independent studies and analysis, exercising independent judgment in selecting and interpreting information, recommending safe engineering designs to support successful operations and/or project completion.• Participate in engineering practice by conducting independent studies and analysis, contributing to the development of technical standards, exercising judgment in selecting and interpreting information, recommending safe engineering designs, and making decisions related to methods and designs as well as providing guidance and advice to other engineering professionals to develop future capability• Deliver exceptional customer service by communicating with stakeholders and performing activities such as defining the scope of engineering/geoscience services to be provided, establishing the basic design criteria with the client, approving all related technical documentation, and assessing and reporting on work progress against standards, objectives, and specifications to support completion of projects safely, with quality, within budget and on time.HVAC Mechanical Engineer Skills and Qualifications:• Registered Professional Engineer (P.Eng.) or Professional Geoscientist (P.Geo.) with Engineers & Geoscientists BC or with another jurisdiction and eligible for registration as such with Engineers & Geoscientists BC• Class 5 driver’s license in good standing• Ability to travel across the Province for short and long term assignments• Familiarity with piping Codes of design such as ASME B31.1, BCBC, ASME Sec VIII Div 1,• Ability to design piping systems and work with piping designer/drafters to produce a layout of the system, sizing all equipment including pipe supports,• Ability to size balance of plant equipment such as pumps, air compressors, dryers, hydraulic power units, valves, strainers, heat exchangers and integrating the components into your design,• Intermediate English skills for professional environment, written and spoken• Familiarity with CAD systems and drawing standards• Proficiency with Auto CAD or 3D design software• Ability to use standard industry design/analysis software• Intermediate MS Office skills (Word, Excel, and PowerPoint)• This role requires experience with the design of mechanical systems for hydroelectric utility generation stations and demonstrated experience working with utility design solutions a in an electric utility environment.• This position is needed to help with an increasing Mechanical work load in capital projects, OMA work programs and Owners Engineer review work.• Generation Mechanical systems include and are not limited to:o hydraulic turbines and generators (Pelton, Francis, Kaplan)o governor systemso gates - intake, draft tube, maintenanceo penstock inlet valves and turbine inlet valveso powerhouse cranes and gantry craneso hoist and other lifting deviceso Industrial HVAC as it applies to hydroelectric stationso balance of plant piping systems - cooling water, service water, domestic potable water, sewage, drainage, dewateringo compressed air systems - plant air, sync condense systems, brake airo oil water separatorso fire protection and fire alarm as it applies to hydroelectric stations - sprinkler wet and dry systems, clean agent systems, aerosol systems, inertization systems, transformer deluge systems, generator deluge systems, fire detection and fire alarm panels• Prepare design work packages including scope, duration, and level of effort estimates;• Interact with project initiator / requestor / operations personnel to establish and prepare user requirement;• Work with estimating group to support the preparation of various level estimates, understand the input required and provide it to the estimator;• Interact with procurement personnel to engage a consultant/contractor. Work with the procurement team from start of procurement process up to signature of the contract;• Prepare signed/sealed engineering deliverables as a Professional of Record (PoR) in accordance with EGBC;• Provide technical assistance and construction support in the field, and undertake field reviews as required by EGBC;• Design upgrades for mechanical systems using state of the art design tools;• Act in the role of Owner's Engineer, and efficiently manage working relationships with manufacturers, consultants and project teams • Provide technical guidance during equipment installation and commissioning;• Prepare or review/accept inspection test plans for factory acceptance test and site acceptance test;• Prepare commissioning test plans and summary of requirements documentation;• Perform various engineering calculations (hydraulic calculation, stress analysis, fatigue analysis…)If you would like to be considered for this opportunity in BC. Please forward your resume via email to Dora Pang, dora.pang@randstad.ca or call (236) 334- 4381.RESPONSIBILITIESQUALIFICATIONS
        HVAC Mechanical EngineerThis is a HVAC Mechanical Engineer opportunity in BC. with the largest power distribution organization in British Columbia and been recognized for excellence and been named one of B.C.’s Top Employers and one of Canada’s Best Diversity Employers for four years in a row.This is a full time, two-year contract located in Burnaby, BC. We are looking for a HVAC Mechanical Engineer to provide HVAC Engineering services as both internally performed work or as owner's Engineer, while reviewing and accepting the HVAC engineering design work of the team. The HVAC Mechanical Engineer will work in a busy team that support all capital and maintenance work and attend to HVAC concerns on large generation projects. HVAC Mechanical Engineer Responsibilities:Experience and Role Accountabilities• A minimum eight (8) years of experience in a relevant engineering field or equivalent.• Must have a minimum of 7 years HVAC experience with at least 5 years in the industrial HVAC• Industrial HVAC design experience in hydroelectric generating stations is a significant asset.• Must have P.eng•Industrial HVAC design experience in hydroelectric generating stations.• An understanding of HVAC Codes of design such as ASHRAE, SMACNA.• An understanding of seismic design and how it applies to industrial systems• An understanding of the interfaces of the HVAC systems with the Fire Protection systems and the ability to work with Fire Protection Engineers to develop the design of the HVAC and smoke control systems.• An understanding of building automation systems/DDC systems.• Develop safe engineering solutions by using initiative and judgement to perform tasks including developing designs, analyzing and resolving problems, and interpreting engineering specifications on medium complexity and scope assignments for projects and operations.• Assist project or operations management to meet safety, cost, quality, and time objectives by proposing changes in plans and estimated costs, recommending payment for work completed by contractors, preparing progress reports, coordinating work schedules and other similar tasks.• Resolve highly technical and unusual design and field engineering problems by conducting independent studies and analysis, exercising independent judgment in selecting and interpreting information, recommending safe engineering designs to support successful operations and/or project completion.• Participate in engineering practice by conducting independent studies and analysis, contributing to the development of technical standards, exercising judgment in selecting and interpreting information, recommending safe engineering designs, and making decisions related to methods and designs as well as providing guidance and advice to other engineering professionals to develop future capability• Deliver exceptional customer service by communicating with stakeholders and performing activities such as defining the scope of engineering/geoscience services to be provided, establishing the basic design criteria with the client, approving all related technical documentation, and assessing and reporting on work progress against standards, objectives, and specifications to support completion of projects safely, with quality, within budget and on time.HVAC Mechanical Engineer Skills and Qualifications:• Registered Professional Engineer (P.Eng.) or Professional Geoscientist (P.Geo.) with Engineers & Geoscientists BC or with another jurisdiction and eligible for registration as such with Engineers & Geoscientists BC• Class 5 driver’s license in good standing• Ability to travel across the Province for short and long term assignments• Familiarity with piping Codes of design such as ASME B31.1, BCBC, ASME Sec VIII Div 1,• Ability to design piping systems and work with piping designer/drafters to produce a layout of the system, sizing all equipment including pipe supports,• Ability to size balance of plant equipment such as pumps, air compressors, dryers, hydraulic power units, valves, strainers, heat exchangers and integrating the components into your design,• Intermediate English skills for professional environment, written and spoken• Familiarity with CAD systems and drawing standards• Proficiency with Auto CAD or 3D design software• Ability to use standard industry design/analysis software• Intermediate MS Office skills (Word, Excel, and PowerPoint)• This role requires experience with the design of mechanical systems for hydroelectric utility generation stations and demonstrated experience working with utility design solutions a in an electric utility environment.• This position is needed to help with an increasing Mechanical work load in capital projects, OMA work programs and Owners Engineer review work.• Generation Mechanical systems include and are not limited to:o hydraulic turbines and generators (Pelton, Francis, Kaplan)o governor systemso gates - intake, draft tube, maintenanceo penstock inlet valves and turbine inlet valveso powerhouse cranes and gantry craneso hoist and other lifting deviceso Industrial HVAC as it applies to hydroelectric stationso balance of plant piping systems - cooling water, service water, domestic potable water, sewage, drainage, dewateringo compressed air systems - plant air, sync condense systems, brake airo oil water separatorso fire protection and fire alarm as it applies to hydroelectric stations - sprinkler wet and dry systems, clean agent systems, aerosol systems, inertization systems, transformer deluge systems, generator deluge systems, fire detection and fire alarm panels• Prepare design work packages including scope, duration, and level of effort estimates;• Interact with project initiator / requestor / operations personnel to establish and prepare user requirement;• Work with estimating group to support the preparation of various level estimates, understand the input required and provide it to the estimator;• Interact with procurement personnel to engage a consultant/contractor. Work with the procurement team from start of procurement process up to signature of the contract;• Prepare signed/sealed engineering deliverables as a Professional of Record (PoR) in accordance with EGBC;• Provide technical assistance and construction support in the field, and undertake field reviews as required by EGBC;• Design upgrades for mechanical systems using state of the art design tools;• Act in the role of Owner's Engineer, and efficiently manage working relationships with manufacturers, consultants and project teams • Provide technical guidance during equipment installation and commissioning;• Prepare or review/accept inspection test plans for factory acceptance test and site acceptance test;• Prepare commissioning test plans and summary of requirements documentation;• Perform various engineering calculations (hydraulic calculation, stress analysis, fatigue analysis…)If you would like to be considered for this opportunity in BC. Please forward your resume via email to Dora Pang, dora.pang@randstad.ca or call (236) 334- 4381.RESPONSIBILITIESQUALIFICATIONS
        • East York, Ontario
        • Permanent
        Are you an experienced industrial electrician looking for a new opportunity in a leading piping system company?Do you have your 442a electrical ticket?Are you looking for a position with a top performing company?Are you looking for a rewarding career that will keep you on your toes?If so, we are looking for a licensed industrial electricianCheck it out below!ADVANTAGES:- Pay rate: $34-$36.50/hr- Shift: Weekday Day shift to start, then weekday continental- Full Benefits program (medical, dental & vision + more)- Generous bonus structure- Permanent Position - Growth Opportunities- Located in East York, ONRESPONSIBILITIES:- Troubleshoot, repair and maintain Injection Molding machines and plastic processing equipment.- Troubleshoot, repair and maintain facility equipment and infrastructure.- Ensure all equipment, structures and tools are in safe operating condition as per manufacturer’s specifications.- Contribute to plant cost and downtime reduction.- Plan and execute work assignments utilizing equipment schematics, drawings and manuals.- Repair, maintain and install equipment using hand and power tools, rigging equipment, testers and meters as required.- Repair, maintain and install equipment using Forklifts, Skyjacks and Cranes as required.- Complete all required documentation.- Follow all safety and non-safety related procedures.- Follow all Environmental procedures.- Continuous participation in training programs and seminars.- Continuous participation in 5S program- Other duties as assignedQUALIFICATIONS:- 442A Industrial Electrical Ticket - Hydraulic and Pneumatic experience- 5+ years in a manufacturing environment- MIG and TIG welding capabilities- Proficient in electrical troubleshooting- 3+ years in injecting molding machines and auxiliary equipment- Good communication skills both written and verbal- Strong time management, organizational and attention to detail- Able to work independently with minimal supervisionThank you for your interest in our current open positions.If you are interested in Applying please visit www.randstad.ca and apply through the posting or send your resume to Dylan.lalta@randstad.caPlease check out www.randstad.ca for all of the roles currently open at Randstad! If this isn’t exactly what you are looking for, please let us know what you’re looking for and we would be happy to assist you in finding your career in the industrial field! We cover the following areas: Scarborough, North York, Markham, Richmond Hill, Concord, Aurora, and Newmarket area.Apply today! Randstad wants to hear from you and anyone you know looking for industrial positions!Dylan & Wayne,Phone Number:905.470.4248Fax Number:905.470.0578ADVANTAGES- Pay rate: $34-$36.50/hr- Shift: Weekday Day shift to start, then weekday continental- Full Benefits program (medical, dental & vision + more)- Generous bonus structure- Permanent Position- Growth Opportunities - Located in East York, ONRESPONSIBILITIES- Troubleshoot, repair and maintain Injection Molding machines and plastic processing equipment.- Troubleshoot, repair and maintain facility equipment and infrastructure.- Ensure all equipment, structures and tools are in safe operating condition as per manufacturer’s specifications.- Contribute to plant cost and downtime reduction.- Plan and execute work assignments utilizing equipment schematics, drawings and manuals.- Repair, maintain and install equipment using hand and power tools, rigging equipment, testers and meters as required.- Repair, maintain and install equipment using Forklifts, Skyjacks and Cranes as required.- Complete all required documentation.- Follow all safety and non-safety related procedures.- Follow all Environmental procedures.- Continuous participation in training programs and seminars.- Continuous participation in 5S program- Other duties as assignedQUALIFICATIONS- 442A Industrial Electrical Ticket - Hydraulic and Pneumatic experience- 5 years+ in a manufacturing environment- 3+ years in injecting molding machines and auxiliary equipment- Good communication skills both written and verbal- MIG and TIG welding capabilities- Proficient in electrical troubleshooting- Strong time management, organizational and attention to detail- Able to work independently with minimal supervision- Reliable transportation to and from workSUMMARYAre you an experienced industrial electrician looking for a new opportunity in a leading piping system company?Do you have your 442a electrical ticket?Are you looking for a position with a top performing company?Are you looking for a rewarding career that will keep you on your toes?If so, we are looking for a licensed industrial electricianCheck it out below!
        Are you an experienced industrial electrician looking for a new opportunity in a leading piping system company?Do you have your 442a electrical ticket?Are you looking for a position with a top performing company?Are you looking for a rewarding career that will keep you on your toes?If so, we are looking for a licensed industrial electricianCheck it out below!ADVANTAGES:- Pay rate: $34-$36.50/hr- Shift: Weekday Day shift to start, then weekday continental- Full Benefits program (medical, dental & vision + more)- Generous bonus structure- Permanent Position - Growth Opportunities- Located in East York, ONRESPONSIBILITIES:- Troubleshoot, repair and maintain Injection Molding machines and plastic processing equipment.- Troubleshoot, repair and maintain facility equipment and infrastructure.- Ensure all equipment, structures and tools are in safe operating condition as per manufacturer’s specifications.- Contribute to plant cost and downtime reduction.- Plan and execute work assignments utilizing equipment schematics, drawings and manuals.- Repair, maintain and install equipment using hand and power tools, rigging equipment, testers and meters as required.- Repair, maintain and install equipment using Forklifts, Skyjacks and Cranes as required.- Complete all required documentation.- Follow all safety and non-safety related procedures.- Follow all Environmental procedures.- Continuous participation in training programs and seminars.- Continuous participation in 5S program- Other duties as assignedQUALIFICATIONS:- 442A Industrial Electrical Ticket - Hydraulic and Pneumatic experience- 5+ years in a manufacturing environment- MIG and TIG welding capabilities- Proficient in electrical troubleshooting- 3+ years in injecting molding machines and auxiliary equipment- Good communication skills both written and verbal- Strong time management, organizational and attention to detail- Able to work independently with minimal supervisionThank you for your interest in our current open positions.If you are interested in Applying please visit www.randstad.ca and apply through the posting or send your resume to Dylan.lalta@randstad.caPlease check out www.randstad.ca for all of the roles currently open at Randstad! If this isn’t exactly what you are looking for, please let us know what you’re looking for and we would be happy to assist you in finding your career in the industrial field! We cover the following areas: Scarborough, North York, Markham, Richmond Hill, Concord, Aurora, and Newmarket area.Apply today! Randstad wants to hear from you and anyone you know looking for industrial positions!Dylan & Wayne,Phone Number:905.470.4248Fax Number:905.470.0578ADVANTAGES- Pay rate: $34-$36.50/hr- Shift: Weekday Day shift to start, then weekday continental- Full Benefits program (medical, dental & vision + more)- Generous bonus structure- Permanent Position- Growth Opportunities - Located in East York, ONRESPONSIBILITIES- Troubleshoot, repair and maintain Injection Molding machines and plastic processing equipment.- Troubleshoot, repair and maintain facility equipment and infrastructure.- Ensure all equipment, structures and tools are in safe operating condition as per manufacturer’s specifications.- Contribute to plant cost and downtime reduction.- Plan and execute work assignments utilizing equipment schematics, drawings and manuals.- Repair, maintain and install equipment using hand and power tools, rigging equipment, testers and meters as required.- Repair, maintain and install equipment using Forklifts, Skyjacks and Cranes as required.- Complete all required documentation.- Follow all safety and non-safety related procedures.- Follow all Environmental procedures.- Continuous participation in training programs and seminars.- Continuous participation in 5S program- Other duties as assignedQUALIFICATIONS- 442A Industrial Electrical Ticket - Hydraulic and Pneumatic experience- 5 years+ in a manufacturing environment- 3+ years in injecting molding machines and auxiliary equipment- Good communication skills both written and verbal- MIG and TIG welding capabilities- Proficient in electrical troubleshooting- Strong time management, organizational and attention to detail- Able to work independently with minimal supervision- Reliable transportation to and from workSUMMARYAre you an experienced industrial electrician looking for a new opportunity in a leading piping system company?Do you have your 442a electrical ticket?Are you looking for a position with a top performing company?Are you looking for a rewarding career that will keep you on your toes?If so, we are looking for a licensed industrial electricianCheck it out below!
        • Toronto, Ontario
        • Contract
        This role is in the Integrity & Asset Management department at Enbridge Gas Inc (EGI). The goal of the Integrity department is to ensure the safe and reliable operation of all the company’s gas-carrying assets. The role resides in the Integrity Assessments team which focuses on risk modelling and assessment, Integrity data governance, and software administration for all integrity sub-programs.The focus of this position is to expand the current scope of risk assessment models, make improvements to existing models, and manage & oversee integrity data collection to support new models. Strong analytical and problem solving skills, and self learning of industry modelling techniques, basic understanding of statistics, and understanding of SQL and VB Script coding languages is required. Previous experience in the gas utility industry or integrity risk & reliability assessments is preferred.Qualifications:Required:- Professional Engineer (P. Eng) Designation with 4+ years engineering experience- Strong independent problem solver- Understanding of the gas utility industry- Strong communication skills to relay technical information clearly and conciselyPreferred:- Quantitative risk modeling in piping industry- Experience with SQL, VB Script, and VBA coding languages- Advanced mathematical and statistical techniques- Knowledge of ECDA- Knowledge of QRA techniques- Experience with creating PowerBI interactive dashboards- Knowledge of pipeline materials and metallurgy- Experience with TSSA/NEB Regulations and CSA Z662 standardPlease send your resume in confidence to paul.dusome@randstad.caRESPONSIBILITIESQUALIFICATIONS
        This role is in the Integrity & Asset Management department at Enbridge Gas Inc (EGI). The goal of the Integrity department is to ensure the safe and reliable operation of all the company’s gas-carrying assets. The role resides in the Integrity Assessments team which focuses on risk modelling and assessment, Integrity data governance, and software administration for all integrity sub-programs.The focus of this position is to expand the current scope of risk assessment models, make improvements to existing models, and manage & oversee integrity data collection to support new models. Strong analytical and problem solving skills, and self learning of industry modelling techniques, basic understanding of statistics, and understanding of SQL and VB Script coding languages is required. Previous experience in the gas utility industry or integrity risk & reliability assessments is preferred.Qualifications:Required:- Professional Engineer (P. Eng) Designation with 4+ years engineering experience- Strong independent problem solver- Understanding of the gas utility industry- Strong communication skills to relay technical information clearly and conciselyPreferred:- Quantitative risk modeling in piping industry- Experience with SQL, VB Script, and VBA coding languages- Advanced mathematical and statistical techniques- Knowledge of ECDA- Knowledge of QRA techniques- Experience with creating PowerBI interactive dashboards- Knowledge of pipeline materials and metallurgy- Experience with TSSA/NEB Regulations and CSA Z662 standardPlease send your resume in confidence to paul.dusome@randstad.caRESPONSIBILITIESQUALIFICATIONS
        • East York, Ontario
        • Permanent
        Are you an experienced industrial millwright/mechanic looking for a new opportunity in a leading piping system company?Do you have your 433a electrical ticket?Are you looking for a position with a top performing company?Are you looking for a rewarding career that will keep you on your toes?If so, we are looking for a licensed industrial millwright/mechanicCheck it out below!ADVANTAGES:- Pay rate: $34-$36.50/hr- Shift: Weekday Day shift to start, then weekday continental (7:30AM-7:30PM)- Full Benefits program (medical, dental & vision + more)- Generous bonus structure- Permanent Position- Growth Opportunities- Located in East York, ONRESPONSIBILITIES:- Troubleshoot, repair and maintain Injection Molding machines and plastic processing equipment.- Troubleshoot, repair and maintain facility equipment and infrastructure.- Ensure all equipment, structures and tools are in safe operating condition as per manufacturer’s specifications.- Contribute to plant cost and downtime reduction.- Repair breakdown of equipment, machinery, and infrastructure- Plan and execute work assignments utilizing equipment schematics, drawings and manuals.- Repair, maintain and install equipment using hand and power tools, rigging equipment, testers and meters as required.- Repair, maintain and install equipment using Forklifts, Skyjacks and Cranes as required.- Complete all required documentation.- Follow all safety and non-safety related procedures.- Follow all Environmental procedures.- Continuous participation in training programs and seminars.- Continuous participation in 5S program- Other duties as assignedQUALIFICATIONS: - 433A Industrial Electrical Ticket- Hydraulic and Pneumatic experience- 5 years+ in a manufacturing environment- 3+ years in injecting molding machines and auxiliary equipment- Good communication skills both written and verbal- Demonstrated applied math, mechanical and basic electrical aptitude- Sound understanding of conveyors, pumps, granulators, pneumatic, and working knowledge of industrial tools- Experience with Mig, Tig and Arc welding equipment- Strong time management, organizational and attention to detail- Able to work independently with minimal supervision- Reliable transportation to and from workThank you for your interest in our current open positions.If you are interested in Applying please visit www.randstad.ca and apply through the posting or send your resume to Dylan.lalta@randstad.caPlease check out www.randstad.ca for all of the roles currently open at Randstad! If this isn’t exactly what you are looking for, please let us know what you’re looking for and we would be happy to assist you in finding your career in the industrial field! We cover the following areas: Scarborough, North York, Markham, Richmond Hill, Concord, Aurora, and Newmarket area.Apply today! Randstad wants to hear from you and anyone you know looking for industrial positions!Dylan & Wayne,Phone Number:905.470.4248Fax Number:905.470.0578ADVANTAGES- Pay rate: $34-$36.50/hr- Shift: Weekday Day shift to start, then weekday continental (7:30AM-7:30PM)- Full Benefits program (medical, dental & vision + more)- Generous bonus structure- Permanent Position- Growth Opportunities- Located in East York, ONRESPONSIBILITIES- Troubleshoot, repair and maintain Injection Molding machines and plastic processing equipment.- Troubleshoot, repair and maintain facility equipment and infrastructure.- Ensure all equipment, structures and tools are in safe operating condition as per manufacturer’s specifications.- Contribute to plant cost and downtime reduction.- Plan and execute work assignments utilizing equipment schematics, drawings and manuals.- Repair, maintain and install equipment using hand and power tools, rigging equipment, testers and meters as required.- Repair, maintain and install equipment using Forklifts, Skyjacks and Cranes as required.- Complete all required documentation.- Follow all safety and non-safety related procedures.- Follow all Environmental procedures.- Continuous participation in training programs and seminars.- Continuous participation in 5S program- Other duties as assignedQUALIFICATIONS- 433A Industrial Electrical Ticket- Hydraulic and Pneumatic experience- 5 years+ in a manufacturing environment- 3+ years in injecting molding machines and auxiliary equipment- Good communication skills both written and verbal- Demonstrated applied math, mechanical and basic electrical aptitude- Sound understanding of conveyors, pumps, granulators, pneumatic, and working knowledge of industrial tools- Experience with Mig, Tig and Arc welding equipment- Strong time management, organizational and attention to detail- Able to work independently with minimal supervision- Reliable transportation to and from workSUMMARYAre you an experienced industrial millwright/mechanic looking for a new opportunity in a leading piping system company?Do you have your 433a electrical ticket?Are you looking for a position with a top performing company?Are you looking for a rewarding career that will keep you on your toes?If so, we are looking for a licensed industrial millwright/mechanicCheck it out below!
        Are you an experienced industrial millwright/mechanic looking for a new opportunity in a leading piping system company?Do you have your 433a electrical ticket?Are you looking for a position with a top performing company?Are you looking for a rewarding career that will keep you on your toes?If so, we are looking for a licensed industrial millwright/mechanicCheck it out below!ADVANTAGES:- Pay rate: $34-$36.50/hr- Shift: Weekday Day shift to start, then weekday continental (7:30AM-7:30PM)- Full Benefits program (medical, dental & vision + more)- Generous bonus structure- Permanent Position- Growth Opportunities- Located in East York, ONRESPONSIBILITIES:- Troubleshoot, repair and maintain Injection Molding machines and plastic processing equipment.- Troubleshoot, repair and maintain facility equipment and infrastructure.- Ensure all equipment, structures and tools are in safe operating condition as per manufacturer’s specifications.- Contribute to plant cost and downtime reduction.- Repair breakdown of equipment, machinery, and infrastructure- Plan and execute work assignments utilizing equipment schematics, drawings and manuals.- Repair, maintain and install equipment using hand and power tools, rigging equipment, testers and meters as required.- Repair, maintain and install equipment using Forklifts, Skyjacks and Cranes as required.- Complete all required documentation.- Follow all safety and non-safety related procedures.- Follow all Environmental procedures.- Continuous participation in training programs and seminars.- Continuous participation in 5S program- Other duties as assignedQUALIFICATIONS: - 433A Industrial Electrical Ticket- Hydraulic and Pneumatic experience- 5 years+ in a manufacturing environment- 3+ years in injecting molding machines and auxiliary equipment- Good communication skills both written and verbal- Demonstrated applied math, mechanical and basic electrical aptitude- Sound understanding of conveyors, pumps, granulators, pneumatic, and working knowledge of industrial tools- Experience with Mig, Tig and Arc welding equipment- Strong time management, organizational and attention to detail- Able to work independently with minimal supervision- Reliable transportation to and from workThank you for your interest in our current open positions.If you are interested in Applying please visit www.randstad.ca and apply through the posting or send your resume to Dylan.lalta@randstad.caPlease check out www.randstad.ca for all of the roles currently open at Randstad! If this isn’t exactly what you are looking for, please let us know what you’re looking for and we would be happy to assist you in finding your career in the industrial field! We cover the following areas: Scarborough, North York, Markham, Richmond Hill, Concord, Aurora, and Newmarket area.Apply today! Randstad wants to hear from you and anyone you know looking for industrial positions!Dylan & Wayne,Phone Number:905.470.4248Fax Number:905.470.0578ADVANTAGES- Pay rate: $34-$36.50/hr- Shift: Weekday Day shift to start, then weekday continental (7:30AM-7:30PM)- Full Benefits program (medical, dental & vision + more)- Generous bonus structure- Permanent Position- Growth Opportunities- Located in East York, ONRESPONSIBILITIES- Troubleshoot, repair and maintain Injection Molding machines and plastic processing equipment.- Troubleshoot, repair and maintain facility equipment and infrastructure.- Ensure all equipment, structures and tools are in safe operating condition as per manufacturer’s specifications.- Contribute to plant cost and downtime reduction.- Plan and execute work assignments utilizing equipment schematics, drawings and manuals.- Repair, maintain and install equipment using hand and power tools, rigging equipment, testers and meters as required.- Repair, maintain and install equipment using Forklifts, Skyjacks and Cranes as required.- Complete all required documentation.- Follow all safety and non-safety related procedures.- Follow all Environmental procedures.- Continuous participation in training programs and seminars.- Continuous participation in 5S program- Other duties as assignedQUALIFICATIONS- 433A Industrial Electrical Ticket- Hydraulic and Pneumatic experience- 5 years+ in a manufacturing environment- 3+ years in injecting molding machines and auxiliary equipment- Good communication skills both written and verbal- Demonstrated applied math, mechanical and basic electrical aptitude- Sound understanding of conveyors, pumps, granulators, pneumatic, and working knowledge of industrial tools- Experience with Mig, Tig and Arc welding equipment- Strong time management, organizational and attention to detail- Able to work independently with minimal supervision- Reliable transportation to and from workSUMMARYAre you an experienced industrial millwright/mechanic looking for a new opportunity in a leading piping system company?Do you have your 433a electrical ticket?Are you looking for a position with a top performing company?Are you looking for a rewarding career that will keep you on your toes?If so, we are looking for a licensed industrial millwright/mechanicCheck it out below!
        • Toronto, Ontario
        • Contract
        Randstad Engineering is seeking a Mechanical Plant Layout Designer on behalf of our Client, a Toronto-based consulting firm providing engineering and project delivery services for the mining sector.Duties and Responsibilities:- Production of mechanical layouts and plant design using Plant3D or related software- Extracting drawings from a 3-D model - Develop Equipment Lists with Engineering - Locate all equipment - Prepare and review drawings and designs to ensure standards of quality and accuracy are met - Read, understand, and comment on manufacturer equipment drawings and specifications, work and collaborate with other discipline team - Work in conjunction with the engineers, working from the engineer's directions - Creating CAD drawings as per customer rules and presentation requirements - Coordinate with all disciplines on requirements for assigned area - Coordinate with all disciplines on routing and space allotment - Coordinate with other offices/companies at interfaces between design areas - Review specifications and vendor documentation for associated equipment Skills / Qualifications - Degree in Mechanical Engineering Technology with North American experience in mining and mineral or similar industries - 5 - 7 years' design experience, preferably in the consulting industry, (preference will be given to those candidate with experience in Gold Mining projects) - Experience in process-plant mechanical design and layout design in 3D environment - Experience in site development - Experience designing in a large equipment and conveyors environment - Proficiency in the use of 3-D modeling platforms. - Experience with 3D Design tools such as Plant3D, Microstation V8, PDMS-E3D, Navisworks, Smart Plant Reviewer, Laser scan tools, Quanta point, Leica Geosystems TruView, etc- Experience in programing in any environment will be an advantage. - A good understanding of mechanical equipment in relation to operation and maintenance - A good understanding related to other disciplines (Civil, Structural, Architectural, Piping, Building Services, Electrical and Instrumentation & Controls) design, equipment and layout requirements - Ability to work in a multi discipline environment Interested? Apply online at www.randstad.ca or send your resume to jill.ventura@randstad.ca today.RESPONSIBILITIESQUALIFICATIONS
        Randstad Engineering is seeking a Mechanical Plant Layout Designer on behalf of our Client, a Toronto-based consulting firm providing engineering and project delivery services for the mining sector.Duties and Responsibilities:- Production of mechanical layouts and plant design using Plant3D or related software- Extracting drawings from a 3-D model - Develop Equipment Lists with Engineering - Locate all equipment - Prepare and review drawings and designs to ensure standards of quality and accuracy are met - Read, understand, and comment on manufacturer equipment drawings and specifications, work and collaborate with other discipline team - Work in conjunction with the engineers, working from the engineer's directions - Creating CAD drawings as per customer rules and presentation requirements - Coordinate with all disciplines on requirements for assigned area - Coordinate with all disciplines on routing and space allotment - Coordinate with other offices/companies at interfaces between design areas - Review specifications and vendor documentation for associated equipment Skills / Qualifications - Degree in Mechanical Engineering Technology with North American experience in mining and mineral or similar industries - 5 - 7 years' design experience, preferably in the consulting industry, (preference will be given to those candidate with experience in Gold Mining projects) - Experience in process-plant mechanical design and layout design in 3D environment - Experience in site development - Experience designing in a large equipment and conveyors environment - Proficiency in the use of 3-D modeling platforms. - Experience with 3D Design tools such as Plant3D, Microstation V8, PDMS-E3D, Navisworks, Smart Plant Reviewer, Laser scan tools, Quanta point, Leica Geosystems TruView, etc- Experience in programing in any environment will be an advantage. - A good understanding of mechanical equipment in relation to operation and maintenance - A good understanding related to other disciplines (Civil, Structural, Architectural, Piping, Building Services, Electrical and Instrumentation & Controls) design, equipment and layout requirements - Ability to work in a multi discipline environment Interested? Apply online at www.randstad.ca or send your resume to jill.ventura@randstad.ca today.RESPONSIBILITIESQUALIFICATIONS
        • Saint-Laurent, Québec
        • Permanent
        Permanent opportunity in Ville Saint-Laurent!Interviews as soon as this week!A company that designs and manufactures piping products is looking for a granulator operator for its Ville-Saint-Laurent site.Tasks and Responsibilities:- Apply and respect the Health, Safety and Environment directives;- Report health / safety hazards (OHS) and wear PPE at all times;- Operate the granulator and the sprayer to promote product recovery;- Promote the movement of materials using a forklift / overhead crane;- Sort the packing items and materials / pipes to eliminate contamination;- Perform the required tasks related to the retention pipes;- Complete production reports to document progress at the manufacturing level;- Identify and weigh the boxes of recycled pellets;- Replace operators as needed to acquire new knowledge;- Ensure that the workplaces are clean at all times;Advantages- Hourly rate: $ 19.78 ($ 18.79 during probation) + night premium + overtime- Schedule: rotating shifts every two weeks day / night- Permanence after 720 hours worked- Program comprising a retirement savings plan and group insurance covered bythe companyQualifications- Hold a secondary school diploma (D.E.S.) or equivalent;- Have experience in the manufacturing environment, an asset;- Pass the mathematical knowledge test (unit of measures, conversion ...);- Master the French language;- Good manual dexterity;- Experience with overhead cranes or forklift or basket license (an asset);- Be able to work physically and in a hot environment.If you think you are the person we are looking for, contact Nata or Gabriel without delay to apply immediately at 514-332-0955. Send your resume to the following address: vslindus@randstad.caDid you know that for each person that you refer to us and that we will employ for at least 4 consecutive weeks or that we will hire for a permanent position, we will give you a minimum of $ 100. Easy, right? Invite your friends and family to come and open a case at one of our branches.Can't find a position that interests you? You are looking for a position in the industrial sector, whether it is for a day laborer position, order picker, machine operator, forklift driver ... Call us immediately at 514-332-0955 and ask for Nata or Gabriel.Human ForwardGabriel,Nata,KaterynaPhone Number:514.332.0955Georgia,Mathieu,Clémence,Gabriel,Nata,KaterynaPhone Number:514.332.0955Fax Number:514.332.8208RESPONSIBILITIESQUALIFICATIONS
        Permanent opportunity in Ville Saint-Laurent!Interviews as soon as this week!A company that designs and manufactures piping products is looking for a granulator operator for its Ville-Saint-Laurent site.Tasks and Responsibilities:- Apply and respect the Health, Safety and Environment directives;- Report health / safety hazards (OHS) and wear PPE at all times;- Operate the granulator and the sprayer to promote product recovery;- Promote the movement of materials using a forklift / overhead crane;- Sort the packing items and materials / pipes to eliminate contamination;- Perform the required tasks related to the retention pipes;- Complete production reports to document progress at the manufacturing level;- Identify and weigh the boxes of recycled pellets;- Replace operators as needed to acquire new knowledge;- Ensure that the workplaces are clean at all times;Advantages- Hourly rate: $ 19.78 ($ 18.79 during probation) + night premium + overtime- Schedule: rotating shifts every two weeks day / night- Permanence after 720 hours worked- Program comprising a retirement savings plan and group insurance covered bythe companyQualifications- Hold a secondary school diploma (D.E.S.) or equivalent;- Have experience in the manufacturing environment, an asset;- Pass the mathematical knowledge test (unit of measures, conversion ...);- Master the French language;- Good manual dexterity;- Experience with overhead cranes or forklift or basket license (an asset);- Be able to work physically and in a hot environment.If you think you are the person we are looking for, contact Nata or Gabriel without delay to apply immediately at 514-332-0955. Send your resume to the following address: vslindus@randstad.caDid you know that for each person that you refer to us and that we will employ for at least 4 consecutive weeks or that we will hire for a permanent position, we will give you a minimum of $ 100. Easy, right? Invite your friends and family to come and open a case at one of our branches.Can't find a position that interests you? You are looking for a position in the industrial sector, whether it is for a day laborer position, order picker, machine operator, forklift driver ... Call us immediately at 514-332-0955 and ask for Nata or Gabriel.Human ForwardGabriel,Nata,KaterynaPhone Number:514.332.0955Georgia,Mathieu,Clémence,Gabriel,Nata,KaterynaPhone Number:514.332.0955Fax Number:514.332.8208RESPONSIBILITIESQUALIFICATIONS
        • Markham, Ontario
        • Contract
        Responsibilities:• Overall responsibility for the analysis, design, technical specifications and picklines for all new sales and district stations, replacement district stations, subdivisions, main extensions, multi-family dwelling, reinforcements, relocations, replacements and headers.• Responsible for design and costing for both upstream and downstream piping on district stations.• Overall responsibility to analyze, plan and design parameters for the Measurement & Regulation Department for all pressure gas sales stations• The Analyst must also ensure projects are prioritized in a cost-effective manner. Negotiate with municipalities and external agencies to minimize conflicts and maximize cost sharing opportunities where potential main relocations are identified.• Project management responsibilities include completion of pickline, cost estimation and tracking for budget accuracy. Ensure timely communication of accurate pressure and flow parameters for design, costing and station selection.• The Analyst is responsible to attend Public Utility Coordinating Committee meetings in order to negotiate with utility and municipal managers and staff to settle conflicts, co-ordinate joint projects, minimized overall costs while maximizing cost sharing and maintain a mutually efficient environment to operate within the municipality.• Represent the client and the Distribution Planning Department at other stakeholder meetings, such as other utilities or agencies to negotiate the company’s position on various planning issues or projects such as relocations.• Overall responsibility for the development of the program for prioritizing and justifying replacement of distribution plant, to ensure integrity of the system.• Responsible to develop and cost estimate a group of replacement projects to meet an overall targeted budget amount.• Overall responsibility for performing an On-Call coordinating role, supporting field forces, for system occurring anywhere across the entire clients System. Emergency response is covered on a 24 hour, 7-day rotating schedule.• The Analyst is required to serve as a key contact for field staff and is accountable to provide accurate planning record information, network analysis, affected customer data, system isolation information and other distribution planning information during system emergencies.• The Analyst is required to serve as a key contact for field staff and is accountable to provide accurate record information, network analysis, customer information, system isolation information and other distribution planning information during system emergencies.• Design and co-ordinate pressure elevations.• Conduct compression coupling searches and contingency plans as required ensuring construction crews are not working in potentially dangerous situations Qualifications• Project management certificate/experience and thorough understanding of Distribution Operations procedures and policies.• Excellent organizational, analytical, communication and negotiation skills• Demonstrate effective working relationships with peers and internal/external customers• 4-6 years’ experience in an operations and/or engineering environment• Thorough knowledge of various computer software programs including spreadsheet and word processor• Thorough knowledge of Planning, Design & Records, Operation & Maintenance, and Construction policies and procedures• Working Knowledge with Maximo, e-GIS, planning and records is an asset• Job shadow, cross training or work experience from any of the following departments: Construction, M&R, Corrosion, Leak Survey• In depth business, industrial and company knowledge is required to perform design analysis function effectively, recognizing impacts on capital dollars and understanding Codes, Standards and regulations is required.• Certified Engineering Technician/Technologist or equivalent, or Project management certificate/experience is an asset• Successful completion of Pipeline inspection school/additional on the job training is an assetPlease send your resume in confidence to paul.dusome@randstad.caRESPONSIBILITIESQUALIFICATIONS
        Responsibilities:• Overall responsibility for the analysis, design, technical specifications and picklines for all new sales and district stations, replacement district stations, subdivisions, main extensions, multi-family dwelling, reinforcements, relocations, replacements and headers.• Responsible for design and costing for both upstream and downstream piping on district stations.• Overall responsibility to analyze, plan and design parameters for the Measurement & Regulation Department for all pressure gas sales stations• The Analyst must also ensure projects are prioritized in a cost-effective manner. Negotiate with municipalities and external agencies to minimize conflicts and maximize cost sharing opportunities where potential main relocations are identified.• Project management responsibilities include completion of pickline, cost estimation and tracking for budget accuracy. Ensure timely communication of accurate pressure and flow parameters for design, costing and station selection.• The Analyst is responsible to attend Public Utility Coordinating Committee meetings in order to negotiate with utility and municipal managers and staff to settle conflicts, co-ordinate joint projects, minimized overall costs while maximizing cost sharing and maintain a mutually efficient environment to operate within the municipality.• Represent the client and the Distribution Planning Department at other stakeholder meetings, such as other utilities or agencies to negotiate the company’s position on various planning issues or projects such as relocations.• Overall responsibility for the development of the program for prioritizing and justifying replacement of distribution plant, to ensure integrity of the system.• Responsible to develop and cost estimate a group of replacement projects to meet an overall targeted budget amount.• Overall responsibility for performing an On-Call coordinating role, supporting field forces, for system occurring anywhere across the entire clients System. Emergency response is covered on a 24 hour, 7-day rotating schedule.• The Analyst is required to serve as a key contact for field staff and is accountable to provide accurate planning record information, network analysis, affected customer data, system isolation information and other distribution planning information during system emergencies.• The Analyst is required to serve as a key contact for field staff and is accountable to provide accurate record information, network analysis, customer information, system isolation information and other distribution planning information during system emergencies.• Design and co-ordinate pressure elevations.• Conduct compression coupling searches and contingency plans as required ensuring construction crews are not working in potentially dangerous situations Qualifications• Project management certificate/experience and thorough understanding of Distribution Operations procedures and policies.• Excellent organizational, analytical, communication and negotiation skills• Demonstrate effective working relationships with peers and internal/external customers• 4-6 years’ experience in an operations and/or engineering environment• Thorough knowledge of various computer software programs including spreadsheet and word processor• Thorough knowledge of Planning, Design & Records, Operation & Maintenance, and Construction policies and procedures• Working Knowledge with Maximo, e-GIS, planning and records is an asset• Job shadow, cross training or work experience from any of the following departments: Construction, M&R, Corrosion, Leak Survey• In depth business, industrial and company knowledge is required to perform design analysis function effectively, recognizing impacts on capital dollars and understanding Codes, Standards and regulations is required.• Certified Engineering Technician/Technologist or equivalent, or Project management certificate/experience is an asset• Successful completion of Pipeline inspection school/additional on the job training is an assetPlease send your resume in confidence to paul.dusome@randstad.caRESPONSIBILITIESQUALIFICATIONS
        • Calgary, Alberta
        • Contract
        JOB DESCRIPTIONProcess Controls Engineer – Compressor Stations and PipelinesCalgary, ABContractRecruiting for our client from the midstream sector, the focus of this position is to provide excellent technical support to Western Canadian Transmission assets ensuring the safe, reliable operations of compressor stations and pipelines.The incumbent will need to perform process design calculations, develop or review process flow diagrams and piping and instrumentation diagrams. Identify overpressure scenarios for various types of processing equipment. Calculate relief loads for all types of overpressure scenarios. Evaluate pressure relief device capacities. Design equipment, understand reactions taking place, install control systems, and start, run and upgrade the processes. Requires 10+ years of experience.SPECIFIC ACCOUNTABILITIES:• Accountable for control system troubleshooting and PLC & HMI programming support.• Support Baker Hughes Mark Vie Hardware with Toolbox ST, Workstation, Trender as well as Emerson (previously GE Fanuc) GE 90-70/90-30, Versamax, RX3i ( background with RX3i within JetPac Platform of value) or RX7i PLC systems, Genius I/O systems, GE Cimplicity/Proficy Machine Edition Software, Cimplicity HMI software, Controller communications – ProfiNet, Devicenet, Modbus, Allen-Bradley PLC5, SLC-500 and Control Logix systems, Flex I/O systems, Rockwell RSLogix 5, 500 and 5000 software, Bently Nevada 3500 system hardware and software, Industrial instrumentation and controllers; P/T transmitters, valve actuators, servo position controllers, and LAN systems.• Experience supporting LM2500 DLE & SAC, LM1600, Solar Titan and Taurus, and Spey or Allision Turbine Units• Accountable for identifying and managing control system risks (both hardware and software) to ensure safe, reliable and efficient operation.• Participate in incident and root cause failure/risk analysis. Develop and spearhead risk mitigation plans.• Accountable for identifying and managing Management of Change requests related to instrumentation/control systems and maintaining change logs of all PLC changes. Maintain control system documentation such as ESD keys.• Accountable for the evaluation of control equipment failure modes to identify systemic and repeat issues.• Proactively develop action plans to minimize & eliminate mean time between failures.• Accountable to be the Operations interface for Expansion and Maintenance Capital Projects.• Participate in key project reviews and provide inputs on instrumentation and control designs to ensure that appropriate design specifications and standards are utilized.• Assist in commissioning and start-up.• Support O&M processes by completing engineering investigations and providing root causes for solution development.• Ensure communication between PLCs and HMIs are maintained to enable trouble-free operation of the Compressor Stations.• Support regulatory audits as requiredSCOPE:• This position is highly autonomous, and has significant empowerment to affect the technical direction across the Busines Unit.• The employee plays a major role in the implementation and maintenance of safety systems such as Overpressure Protection, Emergency Shutdown, Fire/Gas detection, etc.• The duties performed in this role have an immediate impact on operational reliability and Organization’s ability to meet its customer deliveries.KNOWLEDGE, SKILLS AND ABILITIES:• Bachelor’s Degree in Automation / Controls/ Electrical Engineering or equivalent discipline from an accredited university or college.• Professional Engineer or Licensed Professional Technologist (P.L. Eng.) eligible for membership with APEGA and/or APEGBC.• Demonstrated proficiency in the above described accountabilities• Excellent personal management capability, including time and priority management, organization, and accountability based management• Demonstrated proficiency in computer applications• Valid driver’s license with a good driving record.PREFERRED:• Strong interpersonal and communication skills.• Good leadership and team building skills utilizing collaborative methods.• Ability to manage, coordinate, and meet the needs of multiple initiatives and stakeholders with tight deadlines.WORKING CONDITIONS:This role requires travel and additional time commitments outside of regular hours to ensure Operations/Project Support is delivered successfullyIf this sounds like the right role for you and you are confident at what you bring to the table, apply now!Please note: All candidates are subject to Criminal, Reference, Drug and Alcohol Test, Driver’s Abstract, and other checks.Although we appreciate all applications, only those that meet the minimum job qualifications will be considered for this role. We thank you all for your interest.Not the right fit this time? Follow us on our career’s social media pages!The interested candidate is also encouraged to submit a copy of the updated resume to Resource Manager, Geraldine Valiarayil at geraldine.valiarayil@randstad.ca, with the Job Order Number / Position Name in the subject line outlining how you meet the qualifications required for the job.RESPONSIBILITIESQUALIFICATIONS
        JOB DESCRIPTIONProcess Controls Engineer – Compressor Stations and PipelinesCalgary, ABContractRecruiting for our client from the midstream sector, the focus of this position is to provide excellent technical support to Western Canadian Transmission assets ensuring the safe, reliable operations of compressor stations and pipelines.The incumbent will need to perform process design calculations, develop or review process flow diagrams and piping and instrumentation diagrams. Identify overpressure scenarios for various types of processing equipment. Calculate relief loads for all types of overpressure scenarios. Evaluate pressure relief device capacities. Design equipment, understand reactions taking place, install control systems, and start, run and upgrade the processes. Requires 10+ years of experience.SPECIFIC ACCOUNTABILITIES:• Accountable for control system troubleshooting and PLC & HMI programming support.• Support Baker Hughes Mark Vie Hardware with Toolbox ST, Workstation, Trender as well as Emerson (previously GE Fanuc) GE 90-70/90-30, Versamax, RX3i ( background with RX3i within JetPac Platform of value) or RX7i PLC systems, Genius I/O systems, GE Cimplicity/Proficy Machine Edition Software, Cimplicity HMI software, Controller communications – ProfiNet, Devicenet, Modbus, Allen-Bradley PLC5, SLC-500 and Control Logix systems, Flex I/O systems, Rockwell RSLogix 5, 500 and 5000 software, Bently Nevada 3500 system hardware and software, Industrial instrumentation and controllers; P/T transmitters, valve actuators, servo position controllers, and LAN systems.• Experience supporting LM2500 DLE & SAC, LM1600, Solar Titan and Taurus, and Spey or Allision Turbine Units• Accountable for identifying and managing control system risks (both hardware and software) to ensure safe, reliable and efficient operation.• Participate in incident and root cause failure/risk analysis. Develop and spearhead risk mitigation plans.• Accountable for identifying and managing Management of Change requests related to instrumentation/control systems and maintaining change logs of all PLC changes. Maintain control system documentation such as ESD keys.• Accountable for the evaluation of control equipment failure modes to identify systemic and repeat issues.• Proactively develop action plans to minimize & eliminate mean time between failures.• Accountable to be the Operations interface for Expansion and Maintenance Capital Projects.• Participate in key project reviews and provide inputs on instrumentation and control designs to ensure that appropriate design specifications and standards are utilized.• Assist in commissioning and start-up.• Support O&M processes by completing engineering investigations and providing root causes for solution development.• Ensure communication between PLCs and HMIs are maintained to enable trouble-free operation of the Compressor Stations.• Support regulatory audits as requiredSCOPE:• This position is highly autonomous, and has significant empowerment to affect the technical direction across the Busines Unit.• The employee plays a major role in the implementation and maintenance of safety systems such as Overpressure Protection, Emergency Shutdown, Fire/Gas detection, etc.• The duties performed in this role have an immediate impact on operational reliability and Organization’s ability to meet its customer deliveries.KNOWLEDGE, SKILLS AND ABILITIES:• Bachelor’s Degree in Automation / Controls/ Electrical Engineering or equivalent discipline from an accredited university or college.• Professional Engineer or Licensed Professional Technologist (P.L. Eng.) eligible for membership with APEGA and/or APEGBC.• Demonstrated proficiency in the above described accountabilities• Excellent personal management capability, including time and priority management, organization, and accountability based management• Demonstrated proficiency in computer applications• Valid driver’s license with a good driving record.PREFERRED:• Strong interpersonal and communication skills.• Good leadership and team building skills utilizing collaborative methods.• Ability to manage, coordinate, and meet the needs of multiple initiatives and stakeholders with tight deadlines.WORKING CONDITIONS:This role requires travel and additional time commitments outside of regular hours to ensure Operations/Project Support is delivered successfullyIf this sounds like the right role for you and you are confident at what you bring to the table, apply now!Please note: All candidates are subject to Criminal, Reference, Drug and Alcohol Test, Driver’s Abstract, and other checks.Although we appreciate all applications, only those that meet the minimum job qualifications will be considered for this role. We thank you all for your interest.Not the right fit this time? Follow us on our career’s social media pages!The interested candidate is also encouraged to submit a copy of the updated resume to Resource Manager, Geraldine Valiarayil at geraldine.valiarayil@randstad.ca, with the Job Order Number / Position Name in the subject line outlining how you meet the qualifications required for the job.RESPONSIBILITIESQUALIFICATIONS

      thank you for subscribing to your personalised job alerts.

      It looks like you want to switch your language. This will reset your filters on your current job search.