Thank you for subscribing to your personalised job alerts.

    16 jobs found in saint thomas, ontario

    filter2
    clear all
      • London, Ontario
      • Permanent
      Our client in London, ON has partnered with Randstad Engineering in their search for a Water Resources Engineer to join their growing team! In this role you will work in our clients Land Development Division, collaborating on a variety of projects at various stages, that are both challenging and impactful.AdvantagesThis is a permanent opportunity with a full service engineering organization that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, performance bonuses, Benefits, Vacation and Flexibility.ResponsibilitiesCompleting technical hydrologic and hydraulic analysis tasks to support the design and assessment of:• Hydrologic modeling, sizing of storm water management facilities• Hydraulic modeling of water courses (creeks/rivers)• Infrastructure for flood plain mapping• Stormwater management facility design• Water balance impact assessments.Preparation of technical reports and correspondence to document technical analyses undertaken, for submission to clients and approval authorities.Communications with project managers, clients and consultants to ensure design will work within the overall scope of the project.Coordinate with team members to ensure efficient project delivery.Evaluating project information using strong technical skills, experience, innovation, and engineering judgement to transform projects from concept to drawings and detailed design.QualificationsUniversity degree in Civil Engineering, Hydrology, Water Resources or Earth Sciences.A minimum of 3-5 years’ of relevant experienceProfessional Engineer designation (P.Eng) in good standing or pursuing the designation (EIT)SummaryIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our client in London, ON has partnered with Randstad Engineering in their search for a Water Resources Engineer to join their growing team! In this role you will work in our clients Land Development Division, collaborating on a variety of projects at various stages, that are both challenging and impactful.AdvantagesThis is a permanent opportunity with a full service engineering organization that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, performance bonuses, Benefits, Vacation and Flexibility.ResponsibilitiesCompleting technical hydrologic and hydraulic analysis tasks to support the design and assessment of:• Hydrologic modeling, sizing of storm water management facilities• Hydraulic modeling of water courses (creeks/rivers)• Infrastructure for flood plain mapping• Stormwater management facility design• Water balance impact assessments.Preparation of technical reports and correspondence to document technical analyses undertaken, for submission to clients and approval authorities.Communications with project managers, clients and consultants to ensure design will work within the overall scope of the project.Coordinate with team members to ensure efficient project delivery.Evaluating project information using strong technical skills, experience, innovation, and engineering judgement to transform projects from concept to drawings and detailed design.QualificationsUniversity degree in Civil Engineering, Hydrology, Water Resources or Earth Sciences.A minimum of 3-5 years’ of relevant experienceProfessional Engineer designation (P.Eng) in good standing or pursuing the designation (EIT)SummaryIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • London, Ontario
      • Contract
      Job Description:•Conduct repairs, modifications and retrofits on vehicles•Provide customer with technical assistance on repair procedures•Liaise with internal and external customers for resolution of data and technical issues•Prepare input for various management and log reports•Perform rework tasks and other general assembly tasks•Maintain safe work practices•Monitor parts usage and report on any material issuesAdvantagesHeavy Equipment TechnicianLondon Ontario12 month contract$24.00 – 33.50/hourResponsibilitiesREQUIRED Qualifications:•Truck, coach, automotive interprovincial certification or qualified Military Fire Control Systems Technician or Military Electro-Optical Repair Technician or Heavy Equipment Technician•Minimum 1 - 2 years’ experience in the operation and maintenance of vehicles•Ability to read and interpret technical drawings and documentation•Strong communication, organization and prioritization skills•Demonstrated strength in Microsoft Office applications•Experience working with teams and/or customers•Ability to work independently and take initiative•Ability to meet physical demands of the job•Possess a valid Driver’s License and ability to qualify for DZ license•Must possess or be able to obtain a valid Canadian Firearms Restricted Possession and Acquisition License (PAL)QualificationsPREFERRED (not required) Qualifications:•University degree, College diploma or equivalent Military Certification•Previous repair and maintenance experience with heavy equipment/machinery•Valid Secret Level 2 security clearanceSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Job Description:•Conduct repairs, modifications and retrofits on vehicles•Provide customer with technical assistance on repair procedures•Liaise with internal and external customers for resolution of data and technical issues•Prepare input for various management and log reports•Perform rework tasks and other general assembly tasks•Maintain safe work practices•Monitor parts usage and report on any material issuesAdvantagesHeavy Equipment TechnicianLondon Ontario12 month contract$24.00 – 33.50/hourResponsibilitiesREQUIRED Qualifications:•Truck, coach, automotive interprovincial certification or qualified Military Fire Control Systems Technician or Military Electro-Optical Repair Technician or Heavy Equipment Technician•Minimum 1 - 2 years’ experience in the operation and maintenance of vehicles•Ability to read and interpret technical drawings and documentation•Strong communication, organization and prioritization skills•Demonstrated strength in Microsoft Office applications•Experience working with teams and/or customers•Ability to work independently and take initiative•Ability to meet physical demands of the job•Possess a valid Driver’s License and ability to qualify for DZ license•Must possess or be able to obtain a valid Canadian Firearms Restricted Possession and Acquisition License (PAL)QualificationsPREFERRED (not required) Qualifications:•University degree, College diploma or equivalent Military Certification•Previous repair and maintenance experience with heavy equipment/machinery•Valid Secret Level 2 security clearanceSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • London, Ontario
      • Permanent
      Our client in the London area has partnered with Randstad Engineering in the search for a Service Manager to join their growing team! Do you have previous experience installing HVAC Systems? Do you enjoy managing a team of installers? This role may be for you! We are looking for a driven Service Manager to provide excellence in customer service and satisfaction.Advantages- Competitive compensation- Competitive bonus- Benefits- RSP match- Education reimbursement- Generous employee recognition programResponsibilities- Partner with local Managers to plan, budget and deliver on P & L targets- Maximize customer service and meet service commitments- Lead and support the development of a Growth through Install mentality that drives customer satisfaction and future business growth- Manage and coach a team of Technical professionals to maximize their performance, engagement and achievement of goals- Build and establish relationships with Independent HVAC Installation Contractors- Deliver prompt and efficient resolution to customer inquiries/complaints- Ensure exceeding install gross marginQualifications- 5 years HVAC experience- 3-5 years management experience- 3-5 years installation experience- Sales experience and a demonstrated ability to meet sales quotas- Demonstrated results in driving process control, productivity/quality improvement- Experience in a management role within a unionized environment is an assetSummaryApply online today! Or send your resume to Lisa Medeiros at Lisa.Medeiros@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our client in the London area has partnered with Randstad Engineering in the search for a Service Manager to join their growing team! Do you have previous experience installing HVAC Systems? Do you enjoy managing a team of installers? This role may be for you! We are looking for a driven Service Manager to provide excellence in customer service and satisfaction.Advantages- Competitive compensation- Competitive bonus- Benefits- RSP match- Education reimbursement- Generous employee recognition programResponsibilities- Partner with local Managers to plan, budget and deliver on P & L targets- Maximize customer service and meet service commitments- Lead and support the development of a Growth through Install mentality that drives customer satisfaction and future business growth- Manage and coach a team of Technical professionals to maximize their performance, engagement and achievement of goals- Build and establish relationships with Independent HVAC Installation Contractors- Deliver prompt and efficient resolution to customer inquiries/complaints- Ensure exceeding install gross marginQualifications- 5 years HVAC experience- 3-5 years management experience- 3-5 years installation experience- Sales experience and a demonstrated ability to meet sales quotas- Demonstrated results in driving process control, productivity/quality improvement- Experience in a management role within a unionized environment is an assetSummaryApply online today! Or send your resume to Lisa Medeiros at Lisa.Medeiros@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • London, Ontario
      • Permanent
      Our client in London, ON has partnered with Randstad Engineering in their search for a Project Manager for their Land Development division to join their growing team! This role will be responsible to managing and coordinating in the areas of planning, execution and delivery of land and site development projects.AdvantagesThis is a permanent opportunity with a full service engineering organization that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, performance bonuses, RRSP Matching Program, Benefits, Vacation and Flexibility.Responsibilities•Responsible for the planning, executing and delivery of land and site development projects, ensuring the project is within budget and on schedule while managing the clients’ expectations;•Manage day-to-day client interactions, communicate effectively with clients and internal/external project teams, and continually seek opportunities to increase client satisfaction;•Managing project execution by providing direction to the project team, appropriately scheduling time and acting as main point of contact between internal and external project teams;•Procure new projects and clients by identifying business development opportunities, understanding industry and development in the City of London and the London area, leading proposal efforts including completing project scoping and RFP assessments;•Managing project financials including invoicing, progress payment certificates, collecting accounts receivables and managing project budgets Qualifications• Civil Engineering Degree or in related field• 3+ years of experience in a similar role• P.Eng or C.E.T Designation• Strong knowledge of engineering principals and design standards• Working knowledge of MS Office software, including Outlook, Excel and Word• Familiarity with various civil design software – AutoCAD, Civil3DSummaryIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our client in London, ON has partnered with Randstad Engineering in their search for a Project Manager for their Land Development division to join their growing team! This role will be responsible to managing and coordinating in the areas of planning, execution and delivery of land and site development projects.AdvantagesThis is a permanent opportunity with a full service engineering organization that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, performance bonuses, RRSP Matching Program, Benefits, Vacation and Flexibility.Responsibilities•Responsible for the planning, executing and delivery of land and site development projects, ensuring the project is within budget and on schedule while managing the clients’ expectations;•Manage day-to-day client interactions, communicate effectively with clients and internal/external project teams, and continually seek opportunities to increase client satisfaction;•Managing project execution by providing direction to the project team, appropriately scheduling time and acting as main point of contact between internal and external project teams;•Procure new projects and clients by identifying business development opportunities, understanding industry and development in the City of London and the London area, leading proposal efforts including completing project scoping and RFP assessments;•Managing project financials including invoicing, progress payment certificates, collecting accounts receivables and managing project budgets Qualifications• Civil Engineering Degree or in related field• 3+ years of experience in a similar role• P.Eng or C.E.T Designation• Strong knowledge of engineering principals and design standards• Working knowledge of MS Office software, including Outlook, Excel and Word• Familiarity with various civil design software – AutoCAD, Civil3DSummaryIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • London, Ontario
      • Contract
      Position Description •Collect, organize and store parts data/artifacts in support of approved customer maintenance concept•Document the physical breakdown of the vehicle, assembly and/or subsystem(s) in accordance with applicable standards and populate the applicable Data Element Definitions (DED) in the Logistics Support Analysis Record (LSAR) database•Obtain Interactive Electronic Technical Manual (IETM) source data•Develop/write procedures as part of overall development of Repair Parts and Special Tool List (RPSTL) and/or IETM•Generate accurate illustration request to support RPSTL and IETM development•Liaise with LE groups and other company departments for inputs•Assist in updating status logs of work assigned AdvantagesIntegrated Logistic Analyst/EngineerLondon Ontario12 month contract$24.00 – 32.00/hourResponsibilities•Ability to travel (5% Cdn) and (5% US & Int'l) and possess/be able to acquire and maintain a valid passport•Familiarity with vehicle standards and specifications•Experience with SGML/XML, Documentum or working in a Content Management System (CMS)QualificationsPosition Requirements •University Degree or College Diploma in a technical discipline•1-2 years relevant experience•Ability to interpret engineering drawings/schematics•Proficient communication, organization and prioritization skillsSummaryIf you have the necessary qualifications to excel in this position, please apply online.Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Position Description •Collect, organize and store parts data/artifacts in support of approved customer maintenance concept•Document the physical breakdown of the vehicle, assembly and/or subsystem(s) in accordance with applicable standards and populate the applicable Data Element Definitions (DED) in the Logistics Support Analysis Record (LSAR) database•Obtain Interactive Electronic Technical Manual (IETM) source data•Develop/write procedures as part of overall development of Repair Parts and Special Tool List (RPSTL) and/or IETM•Generate accurate illustration request to support RPSTL and IETM development•Liaise with LE groups and other company departments for inputs•Assist in updating status logs of work assigned AdvantagesIntegrated Logistic Analyst/EngineerLondon Ontario12 month contract$24.00 – 32.00/hourResponsibilities•Ability to travel (5% Cdn) and (5% US & Int'l) and possess/be able to acquire and maintain a valid passport•Familiarity with vehicle standards and specifications•Experience with SGML/XML, Documentum or working in a Content Management System (CMS)QualificationsPosition Requirements •University Degree or College Diploma in a technical discipline•1-2 years relevant experience•Ability to interpret engineering drawings/schematics•Proficient communication, organization and prioritization skillsSummaryIf you have the necessary qualifications to excel in this position, please apply online.Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • London, Ontario
      • Contract
      Technologist - Production Liaison/Support Lead, WeldLondon ON12 month contract$24-34/hourlyKey Job Elements•Provides support to shop floor colleagues and supervisors across all shifts to ensure efficient production processes•Participate in Start of Shift meetings to provide updates on changes in work instruction or introduction of new work instructions; provides reminders on break in points for new material•Participate in productivity improvement initiatives•Collect data to support root cause analysis performed by Process or Development Leads•Provide technical document control support•Issue rework packages•Represent Manufacturing Engineering department at all WSBM meetings•Provide briefings to Process and Development Leads as directed by Area Manager•Provide updates to WSBM teams and Change Agents as required•Attend Production meetings and provide updates to Process and Development Leads as directed by Area Manager•Supports 3 shiftsAdvantagesWork Environment•Nature of Supervision: Medium (Some Self-directed work)•Work Interruptions and Distractions: Minimal to medium•Physical Environment: manufacturing/shop floor, some office•Work Interruptions and Distractions: Minimal to mediumResponsibilities Required Qualifications•University degree or Manufacturing Engineering Technologist Diploma•1-3 years’ experience in heavy equipment manufacturing•Knowledge of TeamcenterQualifications Required Qualifications•University degree or Manufacturing Engineering Technologist Diploma•1-3 years’ experience in heavy equipment manufacturing•Knowledge of TeamcenterSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Technologist - Production Liaison/Support Lead, WeldLondon ON12 month contract$24-34/hourlyKey Job Elements•Provides support to shop floor colleagues and supervisors across all shifts to ensure efficient production processes•Participate in Start of Shift meetings to provide updates on changes in work instruction or introduction of new work instructions; provides reminders on break in points for new material•Participate in productivity improvement initiatives•Collect data to support root cause analysis performed by Process or Development Leads•Provide technical document control support•Issue rework packages•Represent Manufacturing Engineering department at all WSBM meetings•Provide briefings to Process and Development Leads as directed by Area Manager•Provide updates to WSBM teams and Change Agents as required•Attend Production meetings and provide updates to Process and Development Leads as directed by Area Manager•Supports 3 shiftsAdvantagesWork Environment•Nature of Supervision: Medium (Some Self-directed work)•Work Interruptions and Distractions: Minimal to medium•Physical Environment: manufacturing/shop floor, some office•Work Interruptions and Distractions: Minimal to mediumResponsibilities Required Qualifications•University degree or Manufacturing Engineering Technologist Diploma•1-3 years’ experience in heavy equipment manufacturing•Knowledge of TeamcenterQualifications Required Qualifications•University degree or Manufacturing Engineering Technologist Diploma•1-3 years’ experience in heavy equipment manufacturing•Knowledge of TeamcenterSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • London, Ontario
      • Contract
      Provisioning/Parts Content Developer London Ontario12 month contract$24.00 – 33.50/hour Position Description •Develop/write recommended repair parts catalogues as part of the overall development of technical manuals for vehicle systems and sub-systems•Document the physical breakdown of a vehicle, assembly and/or subsystem in accordance with applicable standards and approved customer maintenance concept•Referencing previously written material, engineering drawings, models and parts information from Logistic Support Analysis Record database•Working with Illustrators to ensure written instructions include appropriate graphics•Working with Edit and Validation personnel to ensure final product meets customer expectationsAdvantagesProvisioning/Parts Content Developer London Ontario12 month contract$24.00 – 33.50/hourResponsibilities Position Description •Develop/write recommended repair parts catalogues as part of the overall development of technical manuals for vehicle systems and sub-systems•Document the physical breakdown of a vehicle, assembly and/or subsystem in accordance with applicable standards and approved customer maintenance concept•Referencing previously written material, engineering drawings, models and parts information from Logistic Support Analysis Record database•Working with Illustrators to ensure written instructions include appropriate graphics•Working with Edit and Validation personnel to ensure final product meets customer expectationsQualifications Position Requirements •Completed University Degree or College Diploma specific to Engineering or Engineering Technology•Experience with HTML, XML, Coding, VBA/Macro development•Experience with maintenance, or assembly/disassembly of electrical and mechanical systems.•Experience with Standards, Technical Writing or Illustrating.•1 to 3 years relevant experienceSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Provisioning/Parts Content Developer London Ontario12 month contract$24.00 – 33.50/hour Position Description •Develop/write recommended repair parts catalogues as part of the overall development of technical manuals for vehicle systems and sub-systems•Document the physical breakdown of a vehicle, assembly and/or subsystem in accordance with applicable standards and approved customer maintenance concept•Referencing previously written material, engineering drawings, models and parts information from Logistic Support Analysis Record database•Working with Illustrators to ensure written instructions include appropriate graphics•Working with Edit and Validation personnel to ensure final product meets customer expectationsAdvantagesProvisioning/Parts Content Developer London Ontario12 month contract$24.00 – 33.50/hourResponsibilities Position Description •Develop/write recommended repair parts catalogues as part of the overall development of technical manuals for vehicle systems and sub-systems•Document the physical breakdown of a vehicle, assembly and/or subsystem in accordance with applicable standards and approved customer maintenance concept•Referencing previously written material, engineering drawings, models and parts information from Logistic Support Analysis Record database•Working with Illustrators to ensure written instructions include appropriate graphics•Working with Edit and Validation personnel to ensure final product meets customer expectationsQualifications Position Requirements •Completed University Degree or College Diploma specific to Engineering or Engineering Technology•Experience with HTML, XML, Coding, VBA/Macro development•Experience with maintenance, or assembly/disassembly of electrical and mechanical systems.•Experience with Standards, Technical Writing or Illustrating.•1 to 3 years relevant experienceSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • London, Ontario
      • Contract
      Technical Maintenance WriterLondon Ontario12 month contract$24.00 – 33.50/hourPosition Description As a member of the Integrated Product Team, your primary responsibility will be development of the Technical Manuals that are used by our customers for operation and maintenance of our vehicles.As part of our training program, we will provide vendor data, engineering drawings/models and field service inputs to help you better understand how the vehicle is put together, or how a maintenance task should be performed. With this knowledge, you will develop instructions that are reviewed by quality and publishing experts and assembled into a final product (PDF and Interactive Electronic Manual (IETM) formats).The data that is created is also used cross-departmentally to support various Integrated Logistics Support (ILS) functions, such as determining product reliability and life cycle costs. As such, your role will involve teamwork with Design Engineering, Supply Chain Management and Sustainment Services departments, among others.AdvantagesTechnical Maintenance WriterLondon Ontario12 month contract$24.00 – 33.50/hourResponsibilities•Write clear, step-by-step maintenance instructions describing how to remove, repair and replace vehicle system components and assemblies oReferencing previously written material, engineering drawings, modelsoIdentifying tools and test equipment requiredoWorking with Illustrators to ensure written instructions include appropriate graphicsoWorking with Edit and Validation personnel to ensure final product meets customer expectationsQualificationsPosition Requirements •Completed University Degree or College Diploma in Engineering or Engineering Technology•Experience with maintenance, or assembly/disassembly of electrical and mechanical systems.•Experience with HTML, XML, Coding, VBA/Macro development•Experience with Standards, Technical Writing or Illustrating.•1 to 3 years relevant experienceSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Technical Maintenance WriterLondon Ontario12 month contract$24.00 – 33.50/hourPosition Description As a member of the Integrated Product Team, your primary responsibility will be development of the Technical Manuals that are used by our customers for operation and maintenance of our vehicles.As part of our training program, we will provide vendor data, engineering drawings/models and field service inputs to help you better understand how the vehicle is put together, or how a maintenance task should be performed. With this knowledge, you will develop instructions that are reviewed by quality and publishing experts and assembled into a final product (PDF and Interactive Electronic Manual (IETM) formats).The data that is created is also used cross-departmentally to support various Integrated Logistics Support (ILS) functions, such as determining product reliability and life cycle costs. As such, your role will involve teamwork with Design Engineering, Supply Chain Management and Sustainment Services departments, among others.AdvantagesTechnical Maintenance WriterLondon Ontario12 month contract$24.00 – 33.50/hourResponsibilities•Write clear, step-by-step maintenance instructions describing how to remove, repair and replace vehicle system components and assemblies oReferencing previously written material, engineering drawings, modelsoIdentifying tools and test equipment requiredoWorking with Illustrators to ensure written instructions include appropriate graphicsoWorking with Edit and Validation personnel to ensure final product meets customer expectationsQualificationsPosition Requirements •Completed University Degree or College Diploma in Engineering or Engineering Technology•Experience with maintenance, or assembly/disassembly of electrical and mechanical systems.•Experience with HTML, XML, Coding, VBA/Macro development•Experience with Standards, Technical Writing or Illustrating.•1 to 3 years relevant experienceSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • London, Ontario
      • Contract
      Maintenance EngineeringLondon Ontario12 month contract$24.00 – 33.50/hourPosition Description •As a member of the Integrated Product Team, your primary responsibility will be development of the Technical Manuals that are used by our customers for operation and maintenance of our vehicles.As part of our training program, we will provide vendor data, engineering drawings/models and field service inputs to help you better understand how the product is put together, or how a maintenance task should be performed. With this knowledge, you will develop instructions that are reviewed by quality and publishing experts and assembled into a final product (PDF and Interactive Electronic Manual (IETM) formats).The data that is created is also used cross-departmentally to support various Integrated Logistics Support (ILS) functions, such as determining product reliability and life cycle costs. As such, your role will involve teamwork with Design Engineering, Supply Chain Management and Sustainment Services departments, among others.AdvantagesMaintenance EngineeringLondon Ontario12 month contract$24.00 – 33.50/hourResponsibilities•Supports development and/or documentation of critical maintenance dataoAnalyze vehicle system functionality and identify probable failure modes that could impact system performance/safetyoAnalyze and document Failure Mode Effect & Criticality Analysis (FMECA) dataoSupport other departments in the creation of reliability data used for Life Cycle Cost estimates which are used fleet management decision makingoParticipating in Engineering discussions to ensure maintainability best practices are considered in the designoDetermine the tooling and skill sets required to support varying levels of maintenance and locations•Write or support clear, step-by-step maintenance instructions describing how to remove, repair and replace vehicle system components and assembliesoReferencing previously written material, engineering drawings and modelsoIdentifying tools and test equipment requiredoWorking with Illustrators to ensure written instructions include appropriate graphicsoWorking with Edit and Validation personnel to ensure final product meets customer expectationsQualificationsPosition Requirements •Completed University Degree or College Diploma in Engineering or Engineering Technology•Demonstrated experience with FMECA or Logistic Support Analysis Record (LSAR) development.•Experience with maintenance, or assembly/disassembly of electrical and mechanical systems.•Experience with Standards, Technical Writing or Illustrating.•Experience with XML, Coding or VBA/Macro development•1 to 3 years relevant experienceSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Maintenance EngineeringLondon Ontario12 month contract$24.00 – 33.50/hourPosition Description •As a member of the Integrated Product Team, your primary responsibility will be development of the Technical Manuals that are used by our customers for operation and maintenance of our vehicles.As part of our training program, we will provide vendor data, engineering drawings/models and field service inputs to help you better understand how the product is put together, or how a maintenance task should be performed. With this knowledge, you will develop instructions that are reviewed by quality and publishing experts and assembled into a final product (PDF and Interactive Electronic Manual (IETM) formats).The data that is created is also used cross-departmentally to support various Integrated Logistics Support (ILS) functions, such as determining product reliability and life cycle costs. As such, your role will involve teamwork with Design Engineering, Supply Chain Management and Sustainment Services departments, among others.AdvantagesMaintenance EngineeringLondon Ontario12 month contract$24.00 – 33.50/hourResponsibilities•Supports development and/or documentation of critical maintenance dataoAnalyze vehicle system functionality and identify probable failure modes that could impact system performance/safetyoAnalyze and document Failure Mode Effect & Criticality Analysis (FMECA) dataoSupport other departments in the creation of reliability data used for Life Cycle Cost estimates which are used fleet management decision makingoParticipating in Engineering discussions to ensure maintainability best practices are considered in the designoDetermine the tooling and skill sets required to support varying levels of maintenance and locations•Write or support clear, step-by-step maintenance instructions describing how to remove, repair and replace vehicle system components and assembliesoReferencing previously written material, engineering drawings and modelsoIdentifying tools and test equipment requiredoWorking with Illustrators to ensure written instructions include appropriate graphicsoWorking with Edit and Validation personnel to ensure final product meets customer expectationsQualificationsPosition Requirements •Completed University Degree or College Diploma in Engineering or Engineering Technology•Demonstrated experience with FMECA or Logistic Support Analysis Record (LSAR) development.•Experience with maintenance, or assembly/disassembly of electrical and mechanical systems.•Experience with Standards, Technical Writing or Illustrating.•Experience with XML, Coding or VBA/Macro development•1 to 3 years relevant experienceSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • London, Ontario
      • Contract
      Diagnostics EngineeringLondon Ontario12 month contract$24.00 – 33.50/hour•Supports development and/or documentation of critical maintenance dataoAnalysis of electrical, hydraulic and mechanical system functionality to determine most efficient troubleshooting methodology (perform Fault Tree Analysis and/or Failure Mode Effect Analysis of system/component)oSupport development of fault insertion tools and non-destructive faults for use in validation of troubleshooting proceduresoMaintain the configuration and revision of the data in the database as well as all supporting documentsoProactively support and communicate with other Engineering teams and departmentsoAssist with aftermarket support requestsoAttend fit-ups as requiredAdvantagesDiagnostics EngineeringLondon Ontario12 month contract$24.00 – 33.50/hourResponsibilities•Write or support clear, step-by-step fault location instructions describing how to determine which vehicle system components or assemblies require repair or replacementoReferencing previously written material, engineering drawings and models, schematicsoWorking with Illustrators to ensure written instructions include appropriate graphicsoWorking with Edit and Validation personnel to ensure final product meets customer expectationsQualificationsPosition Requirements •Completed University Degree or College Diploma in a technical discipline (Engineering or Engineering Technology)•Logistic Support Analysis Record (LSAR) development•Experience with XML, Coding or VBA/Macro development•Experience with maintenance, troubleshooting, or assembly/disassembly of electrical and mechanical systems•Experience with Standards, Technical Writing or Illustrating.•1 to 3 years relevant experienceSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Diagnostics EngineeringLondon Ontario12 month contract$24.00 – 33.50/hour•Supports development and/or documentation of critical maintenance dataoAnalysis of electrical, hydraulic and mechanical system functionality to determine most efficient troubleshooting methodology (perform Fault Tree Analysis and/or Failure Mode Effect Analysis of system/component)oSupport development of fault insertion tools and non-destructive faults for use in validation of troubleshooting proceduresoMaintain the configuration and revision of the data in the database as well as all supporting documentsoProactively support and communicate with other Engineering teams and departmentsoAssist with aftermarket support requestsoAttend fit-ups as requiredAdvantagesDiagnostics EngineeringLondon Ontario12 month contract$24.00 – 33.50/hourResponsibilities•Write or support clear, step-by-step fault location instructions describing how to determine which vehicle system components or assemblies require repair or replacementoReferencing previously written material, engineering drawings and models, schematicsoWorking with Illustrators to ensure written instructions include appropriate graphicsoWorking with Edit and Validation personnel to ensure final product meets customer expectationsQualificationsPosition Requirements •Completed University Degree or College Diploma in a technical discipline (Engineering or Engineering Technology)•Logistic Support Analysis Record (LSAR) development•Experience with XML, Coding or VBA/Macro development•Experience with maintenance, troubleshooting, or assembly/disassembly of electrical and mechanical systems•Experience with Standards, Technical Writing or Illustrating.•1 to 3 years relevant experienceSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • London, Ontario
      • Permanent
      Our client in the Middlesex County area has partnered with Randstad Engineering in the search for a Quality Engineering Specialist to join their team! If you consider yourself someone that can lead the development of parts, devices , and processes for assembly of medical devices from a QA perspective, this role is for you!Advantages•Competitive compensation•Competitive benefits•Being a part of a world-class manufacturer of highly specialized medical devicesResponsibilities• Lead manufacturing quality engineering actions for new product / part development • Lead the QA portion of new development projects • Assist in the development of component drawings and finished goods drawings • Lead development of automated inspection equipment • Lead the creation and revision of measurement plans and work instructions • Lead the QA portion of manufacturing process control documents • Lead supplier PPAP activities for new development projects • Lead QA portion of the part approval process for new development projects • Lead supplier CAPAs of development programs • Investigate and resolve quality issues for development projects • Ensure that adequate supplier process controls are in place for new product launch • Apply statistical process control to strive for high product quality and lower cost • Lead QA software and QA equipment validation activities • Liaise with Quality Engineering Specialist, Production for approval of new suppliers Qualifications• University degree in mechanical/industrial/electrical engineering or related discipline • Professional Engineer designation, or able to acquire the designation • 5 years of related job experience Specialized Skill or Knowledge • Advanced knowledge in statistical methods and data analysis • Experience in project management • Experience in automation (e.g. microcontrollers, plc’s and sensors, robotics) • Advanced knowledge using Solid works or equivalent CAD software • Advanced knowledge in interpreting blueprints with GD&T • Ability to develop, implement and verify measurement techniques and testing of products (silicone and plastic components, electrical components, etc.) • Advanced knowledge of using and programming CMM’s is an asset • Advanced knowledge using MS Excel and Power BI is an asset -Experience in working in an ISO 13485 or another regulated environment is an asset -Experience with GDP and cGMP is an asset SummaryApply online today! Or send your resume to Lisa Medeiros at Lisa.Medeiros@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our client in the Middlesex County area has partnered with Randstad Engineering in the search for a Quality Engineering Specialist to join their team! If you consider yourself someone that can lead the development of parts, devices , and processes for assembly of medical devices from a QA perspective, this role is for you!Advantages•Competitive compensation•Competitive benefits•Being a part of a world-class manufacturer of highly specialized medical devicesResponsibilities• Lead manufacturing quality engineering actions for new product / part development • Lead the QA portion of new development projects • Assist in the development of component drawings and finished goods drawings • Lead development of automated inspection equipment • Lead the creation and revision of measurement plans and work instructions • Lead the QA portion of manufacturing process control documents • Lead supplier PPAP activities for new development projects • Lead QA portion of the part approval process for new development projects • Lead supplier CAPAs of development programs • Investigate and resolve quality issues for development projects • Ensure that adequate supplier process controls are in place for new product launch • Apply statistical process control to strive for high product quality and lower cost • Lead QA software and QA equipment validation activities • Liaise with Quality Engineering Specialist, Production for approval of new suppliers Qualifications• University degree in mechanical/industrial/electrical engineering or related discipline • Professional Engineer designation, or able to acquire the designation • 5 years of related job experience Specialized Skill or Knowledge • Advanced knowledge in statistical methods and data analysis • Experience in project management • Experience in automation (e.g. microcontrollers, plc’s and sensors, robotics) • Advanced knowledge using Solid works or equivalent CAD software • Advanced knowledge in interpreting blueprints with GD&T • Ability to develop, implement and verify measurement techniques and testing of products (silicone and plastic components, electrical components, etc.) • Advanced knowledge of using and programming CMM’s is an asset • Advanced knowledge using MS Excel and Power BI is an asset -Experience in working in an ISO 13485 or another regulated environment is an asset -Experience with GDP and cGMP is an asset SummaryApply online today! Or send your resume to Lisa Medeiros at Lisa.Medeiros@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • London, Ontario
      • Contract
      Technical IllustratorLondon Ontario12 month contract$24.00 – 33.50/hourPosition Description •Develop electronic technical illustrations IAW contractual and stylistic requirements for operator, maintenance and component technical publications.•Liaison with source data groups to collect data required to complete the illustrations to meet contractual requirements.Advantages•Electronically draw technical illustrations from engineering drawings or source data files using Adobe products.•Responsible for detailing engineering models using Unigraphics NX for the purpose of illustrating.•Responsible for maintaining and managing electronic files IAW departmental requirements using a Content Management System.•Ensure customer satisfaction by meeting quality, cost, and schedule obligations.•Ensure that illustrations are created IAW with the Integrated Master Schedule.•Monitor budgets to ensure that work is performed within the allotted budget.ResponsibilitiesPosition Requirements •College Diploma or University Degree in a related field.•Minimum 1-2 years technical illustration experience.•Proficient communication, organization and prioritization skills•Strong engineering drawing reading skills.•Excellent knowledge of Adobe Illustrator/Photoshop.•Proficiency with Windows network environment and desktop office applications.•Experience with Unigraphics NX and Teamcenter Engineering.Qualifications•Ability to travel (5% Cdn) and (5% US & Int'l) and possess/be able to acquire and maintain a valid passport.•Must be able to meet Anthropometrical Size Restrictions for confined space.•Working knowledge of Content Management SystemSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Technical IllustratorLondon Ontario12 month contract$24.00 – 33.50/hourPosition Description •Develop electronic technical illustrations IAW contractual and stylistic requirements for operator, maintenance and component technical publications.•Liaison with source data groups to collect data required to complete the illustrations to meet contractual requirements.Advantages•Electronically draw technical illustrations from engineering drawings or source data files using Adobe products.•Responsible for detailing engineering models using Unigraphics NX for the purpose of illustrating.•Responsible for maintaining and managing electronic files IAW departmental requirements using a Content Management System.•Ensure customer satisfaction by meeting quality, cost, and schedule obligations.•Ensure that illustrations are created IAW with the Integrated Master Schedule.•Monitor budgets to ensure that work is performed within the allotted budget.ResponsibilitiesPosition Requirements •College Diploma or University Degree in a related field.•Minimum 1-2 years technical illustration experience.•Proficient communication, organization and prioritization skills•Strong engineering drawing reading skills.•Excellent knowledge of Adobe Illustrator/Photoshop.•Proficiency with Windows network environment and desktop office applications.•Experience with Unigraphics NX and Teamcenter Engineering.Qualifications•Ability to travel (5% Cdn) and (5% US & Int'l) and possess/be able to acquire and maintain a valid passport.•Must be able to meet Anthropometrical Size Restrictions for confined space.•Working knowledge of Content Management SystemSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • London, Ontario
      • Contract
      Validation Verification Engineer London Ontario12 month contract$24.00 – 33.00/hourKey Job Elements•Support the validation and verification activities at vehicle level, which consist of;•Coordinate and track test assets•Coordinate and track testing activities•Support the development of test plans and reports (including sign off process)Advantages•Prepare and hold regular verification/validation status meetings•Attend status and working meetings with external customer related to vehicle level verification/validation effortResponsibilities Position Requirements Required Qualifications:•University Degree in Engineering•2 years’ experience in Project Engineering or Systems Engineering•Demonstrated ability to develop / manage budgets and schedules•Strong technical and analytical ability•Basic knowledge of Earned value management system•Excellent communication and strong interpersonal skillsQualificationsPreferred Qualification: •Strong knowledge of cross-departmental procedures / practices•Strong knowledge of design practices•Basic understanding of system verification processes.•Working knowledge of Systems Engineering FundamentalsSummaryQuestions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Validation Verification Engineer London Ontario12 month contract$24.00 – 33.00/hourKey Job Elements•Support the validation and verification activities at vehicle level, which consist of;•Coordinate and track test assets•Coordinate and track testing activities•Support the development of test plans and reports (including sign off process)Advantages•Prepare and hold regular verification/validation status meetings•Attend status and working meetings with external customer related to vehicle level verification/validation effortResponsibilities Position Requirements Required Qualifications:•University Degree in Engineering•2 years’ experience in Project Engineering or Systems Engineering•Demonstrated ability to develop / manage budgets and schedules•Strong technical and analytical ability•Basic knowledge of Earned value management system•Excellent communication and strong interpersonal skillsQualificationsPreferred Qualification: •Strong knowledge of cross-departmental procedures / practices•Strong knowledge of design practices•Basic understanding of system verification processes.•Working knowledge of Systems Engineering FundamentalsSummaryQuestions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • London, Ontario
      • Contract
      Requirements & Analysis Engineer London Ontario12 month contract$24.00 – 33.00/hourGeneral Description:The Contract Requirements Engineer with the Systems Engineering team will participates in Industry Research and Development, and customer-funded projects by writing system, sub-system, and component requirements, assisting the team in managing requirements throughout the life of the project.AdvantagesTasks with the role include:•Write requirements at system/sub-system level•Establish appropriate traceability (up, down, sideways) for developed specifications•Establish and track compliance matrices against developed requirements•Establish verification matrices•Release and manage changes for system/sub-system specifications•Support and participate in Design Reviews•Support engineering team with analyzing and decomposing high level requirements•Participate in brainstorming sessions to develop system/sub-system architecture•Use software to create functional and/or physical system block•Release and update specification documentsResponsibilitiesRequired Qualifications•Recognized University Degree in Engineering (Relevant Discipline)•A minimum of 2 years’ experience in product development environment•Effective computer skills (MS Office as a minimum)•Experience with tools specific to requirements development (DOORS & VISIO)•Effective interpersonal and communications skills and proven ability to work in a team environmentQualificationsPreferred Qualifications•Experience with vehicle system design and operation•Experience with Systems requirements definition, analysis, allocations•Knowledge of relevant Specifications and StandardsSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Requirements & Analysis Engineer London Ontario12 month contract$24.00 – 33.00/hourGeneral Description:The Contract Requirements Engineer with the Systems Engineering team will participates in Industry Research and Development, and customer-funded projects by writing system, sub-system, and component requirements, assisting the team in managing requirements throughout the life of the project.AdvantagesTasks with the role include:•Write requirements at system/sub-system level•Establish appropriate traceability (up, down, sideways) for developed specifications•Establish and track compliance matrices against developed requirements•Establish verification matrices•Release and manage changes for system/sub-system specifications•Support and participate in Design Reviews•Support engineering team with analyzing and decomposing high level requirements•Participate in brainstorming sessions to develop system/sub-system architecture•Use software to create functional and/or physical system block•Release and update specification documentsResponsibilitiesRequired Qualifications•Recognized University Degree in Engineering (Relevant Discipline)•A minimum of 2 years’ experience in product development environment•Effective computer skills (MS Office as a minimum)•Experience with tools specific to requirements development (DOORS & VISIO)•Effective interpersonal and communications skills and proven ability to work in a team environmentQualificationsPreferred Qualifications•Experience with vehicle system design and operation•Experience with Systems requirements definition, analysis, allocations•Knowledge of relevant Specifications and StandardsSummaryIf you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • London, Ontario
      • Contract
      Duties and Responsibilities:•Prepare monthly remittances to benefit providers ensuring accurate reconciliation and account coding•Prepare cheque requisitions for invoice payment•Liaise with Finance department to resolve issues with invoices•Maintain and update employee files and HR records•Track leaves of absence for both hourly and salaried employeesAdvantagesHuman Resources Administrator London Ontario12 month contract$18.00 – 25.00/hourResponsibilities•Track leaves of absence for both hourly and salaried employees•Create and update reports for Total Rewards, Global Mobility and other teams as required•Assist with company credit card program including issuing new cards to travelers, resolving delinquent accounts and closing out balances•Assist in ad-hoc HR projects•Support other HR teams as requiredQualificationsPosition Requirements •Post-secondary education in Human Resources•Proficiency with Excel (v lookups, formulas and pivot tables)•Strong attention to detail and accuracy•Able to work independentlySummaryIf you have the necessary qualifications to excel in this position, please apply online.Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Duties and Responsibilities:•Prepare monthly remittances to benefit providers ensuring accurate reconciliation and account coding•Prepare cheque requisitions for invoice payment•Liaise with Finance department to resolve issues with invoices•Maintain and update employee files and HR records•Track leaves of absence for both hourly and salaried employeesAdvantagesHuman Resources Administrator London Ontario12 month contract$18.00 – 25.00/hourResponsibilities•Track leaves of absence for both hourly and salaried employees•Create and update reports for Total Rewards, Global Mobility and other teams as required•Assist with company credit card program including issuing new cards to travelers, resolving delinquent accounts and closing out balances•Assist in ad-hoc HR projects•Support other HR teams as requiredQualificationsPosition Requirements •Post-secondary education in Human Resources•Proficiency with Excel (v lookups, formulas and pivot tables)•Strong attention to detail and accuracy•Able to work independentlySummaryIf you have the necessary qualifications to excel in this position, please apply online.Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • London, Ontario
      • Permanent
      Our client in London has partnered with Randstad Engineering in their search for a Civil Project Manager (Land Development) to join their growing team! This role will include support in identifying business development opportunities, understanding industry and development in the Region of Waterloo, leading proposal efforts including completing project scoping and RFP assessments.AdvantagesThis is a permanent opportunity with a full service engineering organization that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, performance bonuses, RRSP Matching Program, Benefits, Vacation and Flexibility.Responsibilities•Manage day-to-day client interactions, communicate effectively with clients and internal/external project teams, and continually seek opportunities to increase client satisfaction;•Managing project execution by providing direction to the project team, appropriately scheduling time and acting as main point of contact between internal and external project teams;•Responsible for the planning, executing and delivery of land and site development projects, ensuring the project is within budget and on schedule while managing the clients’ expectations;•Procure new projects and clients by identifying business development opportunities, understanding industry and development in the City of London and the London area, leading proposal efforts including completing project scoping and RFP assessments;•Managing project financials including invoicing, progress payment certificates, collecting accounts receivables and managing project budgets Qualifications• Civil Engineering Degree• 5 years of experience in a similar role• P.Eng or C.E.T Designation• Strong knowledge of Subdivision and Site Plan review process• Strong technical report writing skills, as well as written and verbal communication skills• Working knowledge of MS Office software, including Outlook, Excel and WordSummaryIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our client in London has partnered with Randstad Engineering in their search for a Civil Project Manager (Land Development) to join their growing team! This role will include support in identifying business development opportunities, understanding industry and development in the Region of Waterloo, leading proposal efforts including completing project scoping and RFP assessments.AdvantagesThis is a permanent opportunity with a full service engineering organization that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, performance bonuses, RRSP Matching Program, Benefits, Vacation and Flexibility.Responsibilities•Manage day-to-day client interactions, communicate effectively with clients and internal/external project teams, and continually seek opportunities to increase client satisfaction;•Managing project execution by providing direction to the project team, appropriately scheduling time and acting as main point of contact between internal and external project teams;•Responsible for the planning, executing and delivery of land and site development projects, ensuring the project is within budget and on schedule while managing the clients’ expectations;•Procure new projects and clients by identifying business development opportunities, understanding industry and development in the City of London and the London area, leading proposal efforts including completing project scoping and RFP assessments;•Managing project financials including invoicing, progress payment certificates, collecting accounts receivables and managing project budgets Qualifications• Civil Engineering Degree• 5 years of experience in a similar role• P.Eng or C.E.T Designation• Strong knowledge of Subdivision and Site Plan review process• Strong technical report writing skills, as well as written and verbal communication skills• Working knowledge of MS Office software, including Outlook, Excel and WordSummaryIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

    Thank you for subscribing to your personalised job alerts.

    explore over 11003 jobs with randstad.

    It looks like you want to switch your language. This will reset your filters on your current job search.