Thank you for subscribing to your personalised job alerts.

    3 jobs found in Varennes, Québec

    filter2
    clear all
      • Montreal, Québec
      • Permanent
      Among the world's leading suppliers of the hydropower sector. It provides and installs equipment that accounts for nearly one-third of the hydroelectric power installed in the world.Taking into account safety and quality requirements, ensure the completion of commissioning activities on time and on a budget to ensure customer satisfaction.AdvantagesCompetitive compensation based on experience A permanent position in a stable and dynamic teamResponsibilitiesPlanning Analyze contract and elaborate a project-specific testing plan and schedule; Lead planning and execution of pre, dry and wet commissioning and ensure all interfacesbetween systems are covered; Track and mitigate schedule and budget deviations; Develop project and system-specific commissioning procedures; Identify possible risks and their impact on schedule and cost and develop associated relevant mitigation; Establish and maintain pre-established standard commissioning processes with customers, site (field service) and other commissioning engineers affected to the project; Participate in HSE procedure development for commissioning; Participate in the development of competitive commissioning and testing offers; Support team members (commissioning engineers/technicians) in the planning,commissioning and reporting phase of their specific project.Commissioning Coordinate testing activities with customer and site (field service); Drive and manage commissioning schedule and resources to archive project targets; Perform field tests and measurements and provide expert diagnostics and support; Act as the external and internal customer primary contact in respect to all commissioningtopics Meet, follow and promote all applicable HSE standards. Stop all activities if plant safetyrequirements are not met; Periodic control of site safety procedures and devices; Ensure execution of all testing activities as per contract requirements; Document and track all schedule and/or cost deviations as per applicable process.Reporting Ensure proper documentation of commissioning results (checksheets, reports) andcommissioning meetings; Daily / weekly/monthly reporting when applicable, with a focus on any activities impactingthe critical path. LL and Feedback Feed engineering with commissioning and troubleshooting experiences in design phase; Perform failure and root cause analysis when required; Drive internal and external commissioning Lessons Learned; Participate in department’s continuous improvement by promoting innovation and challengingactual processes and templates.Qualifications Bachelor degree in Electrical engineering combined with at least 5 to 10 years of experience in a similar position related to hydroelectricity; Clear interest in a multi-disciplinary role (electrical / mechanical); Expert in implementation of safety clearance procedure (Lock-Out / Tag-Out); Knowledge of the IEEE norm STD 115, IEC 60034, IEC 60041 and data acquisition (asset); Excellent communication skills in English, verbal and written (French would be an asset); Ability to prioritize and manage multiple tasks in a fast-paced environment; Self-directed with the desire to solve problems; Strong work ethic, positive attitude and proven teamwork skills; Ability to perform well under pressure; Available to travel approximately 40-50% of the time.SummaryIf you recognize yourself in this description and are interested in this opportunity, send your CV to:sogand.ladani@randstad.calucille.verrier@randstad.caDo not hesitate to contact me if you want more information.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Among the world's leading suppliers of the hydropower sector. It provides and installs equipment that accounts for nearly one-third of the hydroelectric power installed in the world.Taking into account safety and quality requirements, ensure the completion of commissioning activities on time and on a budget to ensure customer satisfaction.AdvantagesCompetitive compensation based on experience A permanent position in a stable and dynamic teamResponsibilitiesPlanning Analyze contract and elaborate a project-specific testing plan and schedule; Lead planning and execution of pre, dry and wet commissioning and ensure all interfacesbetween systems are covered; Track and mitigate schedule and budget deviations; Develop project and system-specific commissioning procedures; Identify possible risks and their impact on schedule and cost and develop associated relevant mitigation; Establish and maintain pre-established standard commissioning processes with customers, site (field service) and other commissioning engineers affected to the project; Participate in HSE procedure development for commissioning; Participate in the development of competitive commissioning and testing offers; Support team members (commissioning engineers/technicians) in the planning,commissioning and reporting phase of their specific project.Commissioning Coordinate testing activities with customer and site (field service); Drive and manage commissioning schedule and resources to archive project targets; Perform field tests and measurements and provide expert diagnostics and support; Act as the external and internal customer primary contact in respect to all commissioningtopics Meet, follow and promote all applicable HSE standards. Stop all activities if plant safetyrequirements are not met; Periodic control of site safety procedures and devices; Ensure execution of all testing activities as per contract requirements; Document and track all schedule and/or cost deviations as per applicable process.Reporting Ensure proper documentation of commissioning results (checksheets, reports) andcommissioning meetings; Daily / weekly/monthly reporting when applicable, with a focus on any activities impactingthe critical path. LL and Feedback Feed engineering with commissioning and troubleshooting experiences in design phase; Perform failure and root cause analysis when required; Drive internal and external commissioning Lessons Learned; Participate in department’s continuous improvement by promoting innovation and challengingactual processes and templates.Qualifications Bachelor degree in Electrical engineering combined with at least 5 to 10 years of experience in a similar position related to hydroelectricity; Clear interest in a multi-disciplinary role (electrical / mechanical); Expert in implementation of safety clearance procedure (Lock-Out / Tag-Out); Knowledge of the IEEE norm STD 115, IEC 60034, IEC 60041 and data acquisition (asset); Excellent communication skills in English, verbal and written (French would be an asset); Ability to prioritize and manage multiple tasks in a fast-paced environment; Self-directed with the desire to solve problems; Strong work ethic, positive attitude and proven teamwork skills; Ability to perform well under pressure; Available to travel approximately 40-50% of the time.SummaryIf you recognize yourself in this description and are interested in this opportunity, send your CV to:sogand.ladani@randstad.calucille.verrier@randstad.caDo not hesitate to contact me if you want more information.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Montréal, Québec
      • Contract
      En tant que technicien coordonnateur de chantier, vous serez le bras droit du responsable travaux sur les chantiers. En plus de veiller au bon fonctionnement du chantier, vous serez l’interlocuteur principal pour tous les intervenants du projet.Plus spécifiquement, vous serez amené à :•S’implique directement dans la gestion, incluant - élaboration des méthodes de travail, l’expertise technique en chantiers, la planification, la coordination ainsi que l’avancement des travaux et des coûts.AdvantagesCE QUE NOUS OFFRONS:•Un poste à long terme dans une équipe stable et dynamique•Un travail à l’air libre sur toute la province du Québec dans l’équipe Construction Hydro-Québec, qui agit à titre d’entrepreneur Hydro-Québec•Rémunération complète compétitive selon l’expérience•Formation rémunérée•Assurances collectivesResponsibilities•Est responsable du contrôle de la qualité des travaux.•Apporte un soutien technique au chantier de l’élaboration jusqu’à la fermeture du Plan qualité (interprétation des plans et devis utilisés au chantier, supporte les Responsables chantiers, réalisation des annotés en rouge ainsi que le suivi des QMT et NC).•Prépare les expressions de besoins (matériel, d’outils et d’équipements), participe à la gestion des contrats d’entrepreneurs et fait les relances auprès des fournisseurs. •Effectue les demandes journalières des ressources matérielles (béton, matériaux granulaires, équipements lourds et autres) et assure le contrôle des matériaux en chantier avec les laboratoires externes.•Voit au contrôle documentaire et rend disponible au chantier les normes et encadrements HQ applicables aux travaux.•Fait les démarches nécessaires pour l’obtention des permis et autorisations sur le chantier.•Participe au suivi de coûts hebdomadaire qui est transmis au client (planification, revue budgétaire, faits saillants•Les tâches mentionnées ci-dessus seront requises pour la durée de vie du mandat•Mobilité ProvincialeQualificationsCE QUE NOUS RECHERCHONS : •DEC en génie électrique ou civil ou équivalence•ASP pour le milieu de la construction•Permis de conduire valide et être apte à vous déplacer sur la province•Connaissance du milieu de la construction, de la lecture des plans électriques, devis•Maitrise de la suite Office, MS Project et autres logiciels pour la gestion de projets•Expérience en surveillance de travaux sur des chantiers Hydro Québec, un atoutSummarySi vous vous reconnaissez dans cette description et que vous êtes intéressé(e) par cette opportunité, envoyez votre CV à :sogand.ladani@randstad.ca ou lucille.verrier@randstad.caN'hésitez pas à communiquer avec nous si vous souhaitez plus d'informations.Prendre note que seuls les candidat(e)s ayant les qualifications requises liées au poste seront contacté(e)s.Vous n'êtes pas qualifié(e) pour le poste mais connaissez la perle rare ? Référez-nous cette personne ! Pour chaque candidat référé et embauché par un de nos clients, un bonus de référencement vous sera remis.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      En tant que technicien coordonnateur de chantier, vous serez le bras droit du responsable travaux sur les chantiers. En plus de veiller au bon fonctionnement du chantier, vous serez l’interlocuteur principal pour tous les intervenants du projet.Plus spécifiquement, vous serez amené à :•S’implique directement dans la gestion, incluant - élaboration des méthodes de travail, l’expertise technique en chantiers, la planification, la coordination ainsi que l’avancement des travaux et des coûts.AdvantagesCE QUE NOUS OFFRONS:•Un poste à long terme dans une équipe stable et dynamique•Un travail à l’air libre sur toute la province du Québec dans l’équipe Construction Hydro-Québec, qui agit à titre d’entrepreneur Hydro-Québec•Rémunération complète compétitive selon l’expérience•Formation rémunérée•Assurances collectivesResponsibilities•Est responsable du contrôle de la qualité des travaux.•Apporte un soutien technique au chantier de l’élaboration jusqu’à la fermeture du Plan qualité (interprétation des plans et devis utilisés au chantier, supporte les Responsables chantiers, réalisation des annotés en rouge ainsi que le suivi des QMT et NC).•Prépare les expressions de besoins (matériel, d’outils et d’équipements), participe à la gestion des contrats d’entrepreneurs et fait les relances auprès des fournisseurs. •Effectue les demandes journalières des ressources matérielles (béton, matériaux granulaires, équipements lourds et autres) et assure le contrôle des matériaux en chantier avec les laboratoires externes.•Voit au contrôle documentaire et rend disponible au chantier les normes et encadrements HQ applicables aux travaux.•Fait les démarches nécessaires pour l’obtention des permis et autorisations sur le chantier.•Participe au suivi de coûts hebdomadaire qui est transmis au client (planification, revue budgétaire, faits saillants•Les tâches mentionnées ci-dessus seront requises pour la durée de vie du mandat•Mobilité ProvincialeQualificationsCE QUE NOUS RECHERCHONS : •DEC en génie électrique ou civil ou équivalence•ASP pour le milieu de la construction•Permis de conduire valide et être apte à vous déplacer sur la province•Connaissance du milieu de la construction, de la lecture des plans électriques, devis•Maitrise de la suite Office, MS Project et autres logiciels pour la gestion de projets•Expérience en surveillance de travaux sur des chantiers Hydro Québec, un atoutSummarySi vous vous reconnaissez dans cette description et que vous êtes intéressé(e) par cette opportunité, envoyez votre CV à :sogand.ladani@randstad.ca ou lucille.verrier@randstad.caN'hésitez pas à communiquer avec nous si vous souhaitez plus d'informations.Prendre note que seuls les candidat(e)s ayant les qualifications requises liées au poste seront contacté(e)s.Vous n'êtes pas qualifié(e) pour le poste mais connaissez la perle rare ? Référez-nous cette personne ! Pour chaque candidat référé et embauché par un de nos clients, un bonus de référencement vous sera remis.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Montreal, Québec
      • Permanent
      Your challenge! Reporting to the Plant Manager, the Production Manager's mission is to achieve the manufacturing objectives associated with the unit's business strategy by optimizing available resources, rigorously applying business processes and establishing an effective communication system. You participate in the implementation of processes, practices and tools specific to your unit aimed at optimizing operational efficiency. You also build a mobilized and competent team and support their production efforts while nurturing a culture of continuous improvement and health and safety. As such, you contribute to the achievement of your unit's strategic plan by positively influencing the adoption of healthy and safe behaviours, operating costs, performance, and production capacity and quality. As Cascades has a culture of succession development, we are looking for a Junior Production Manager who will be on a succession program. This person will be paired with an experienced manager to learn about Cascades' operations and culture in order to eventually move into a production manager position in a plant. The position is based in Montreal for the first few years and may be called upon to change depending on the positions available and the needs in the plants. Your responsibilities As a Production Manager you will be responsible for Ensure employee commitment, respect and compliance in OHS mattersEnsure leadership development of production supervisorsFollow up on the performance evaluation of production employeesEnsure compliance with customer specifications during the manufacturing and production of productsApprove work instructions in collaboration with the quality managerControl labor and raw material costsParticipate in the preparation of the production budget and capital projects Plan, organize, direct, control and evaluate the activities of the production departmentIncrease efficiency and participate in continuous improvement projectsMaintain and improve the equipment operational maintenance programFollow up on the program and ensure compliance with the preventive maintenance schedule.Your background and strengths The Production Manager must have the following qualifications: Have a Bachelor's degree in Operations Management, Engineering or other education deemed relevant;Have 1 to 5 years of experience in production supervision in the manufacturing field;Demonstrate collaborative, open and team-oriented leadership, goal setting, performance evaluation, recognition and training;Excellent communication and change management skills;Ability to manage multiple projects simultaneously while respecting deadlines and priorities;Lean manufacturing certification (an asset);Master production management software such as SAP (an asset);Have a good command of French and English (spoken and written). #revealyourpotential #LifeAtCascadesCascades believes in the success of an inclusive organization that values diversity within its team. All qualified candidates will be considered for this position in a fair manner. Use of the masculine in our communications refers equally to both women and men. About CascadesTo be part of Cascades is to reveal the full potential of materials, people and ideas. We are source of possibilities.Since 1964, we have been providing sustainable, innovative and value-creating solutions in packaging, hygiene and recovery.Join 12,000 women and men working in a network of more than 90 operating units located in North America and Europe.  
      Your challenge! Reporting to the Plant Manager, the Production Manager's mission is to achieve the manufacturing objectives associated with the unit's business strategy by optimizing available resources, rigorously applying business processes and establishing an effective communication system. You participate in the implementation of processes, practices and tools specific to your unit aimed at optimizing operational efficiency. You also build a mobilized and competent team and support their production efforts while nurturing a culture of continuous improvement and health and safety. As such, you contribute to the achievement of your unit's strategic plan by positively influencing the adoption of healthy and safe behaviours, operating costs, performance, and production capacity and quality. As Cascades has a culture of succession development, we are looking for a Junior Production Manager who will be on a succession program. This person will be paired with an experienced manager to learn about Cascades' operations and culture in order to eventually move into a production manager position in a plant. The position is based in Montreal for the first few years and may be called upon to change depending on the positions available and the needs in the plants. Your responsibilities As a Production Manager you will be responsible for Ensure employee commitment, respect and compliance in OHS mattersEnsure leadership development of production supervisorsFollow up on the performance evaluation of production employeesEnsure compliance with customer specifications during the manufacturing and production of productsApprove work instructions in collaboration with the quality managerControl labor and raw material costsParticipate in the preparation of the production budget and capital projects Plan, organize, direct, control and evaluate the activities of the production departmentIncrease efficiency and participate in continuous improvement projectsMaintain and improve the equipment operational maintenance programFollow up on the program and ensure compliance with the preventive maintenance schedule.Your background and strengths The Production Manager must have the following qualifications: Have a Bachelor's degree in Operations Management, Engineering or other education deemed relevant;Have 1 to 5 years of experience in production supervision in the manufacturing field;Demonstrate collaborative, open and team-oriented leadership, goal setting, performance evaluation, recognition and training;Excellent communication and change management skills;Ability to manage multiple projects simultaneously while respecting deadlines and priorities;Lean manufacturing certification (an asset);Master production management software such as SAP (an asset);Have a good command of French and English (spoken and written). #revealyourpotential #LifeAtCascadesCascades believes in the success of an inclusive organization that values diversity within its team. All qualified candidates will be considered for this position in a fair manner. Use of the masculine in our communications refers equally to both women and men. About CascadesTo be part of Cascades is to reveal the full potential of materials, people and ideas. We are source of possibilities.Since 1964, we have been providing sustainable, innovative and value-creating solutions in packaging, hygiene and recovery.Join 12,000 women and men working in a network of more than 90 operating units located in North America and Europe.  

    Thank you for subscribing to your personalised job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.