Thank you for subscribing to your personalised job alerts.

5 jobs found for project manager

filter3
clear all
    • Abbotsford, British Columbia
    • Permanent
    We are looking for an experienced Red Seal Millwright to manage projects at our company. You will be working under the facility project manager to manage installations on budget. You will be supervising contractors, and lead members of the teamStrong computer skills (MS Office Suite)Reading blueprints and drawingsInstalling new equipmentTroubleshooting and operating lifting devices - cranes, tractorsInspect the new equipmentAdvantagesCompetitive salary and working with a great team that is supportive and helpful to your development. Benefits package and company shares, and bonuses offered! Medical and dentalResponsibilitiesWork closely with the maintenance team and make sure to promote safety and a good time doing it!QualificationsExperience in a food manufacturing environment, would be preferred. Millwright, Electrical, Boiler or Power Engineering ticket is an assetSummaryGet in touch and apply here, or directly to:Lara.ivkovic@randstad.ca Or 604-346-9176Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    We are looking for an experienced Red Seal Millwright to manage projects at our company. You will be working under the facility project manager to manage installations on budget. You will be supervising contractors, and lead members of the teamStrong computer skills (MS Office Suite)Reading blueprints and drawingsInstalling new equipmentTroubleshooting and operating lifting devices - cranes, tractorsInspect the new equipmentAdvantagesCompetitive salary and working with a great team that is supportive and helpful to your development. Benefits package and company shares, and bonuses offered! Medical and dentalResponsibilitiesWork closely with the maintenance team and make sure to promote safety and a good time doing it!QualificationsExperience in a food manufacturing environment, would be preferred. Millwright, Electrical, Boiler or Power Engineering ticket is an assetSummaryGet in touch and apply here, or directly to:Lara.ivkovic@randstad.ca Or 604-346-9176Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • Oldcastle, Ontario
    • Permanent
    We have an exciting new opportunity for a Tool and Die maker in Windsor!! Our client in Windsor is expanding, and we need your help so that we can grow. We are looking for an experience tool and die maker, or someone who finished their apprenticeship and is looking to further their knowledge, as well as be a part of a company that is growing and does hire from within. Tool makers all have the opportunity to move into a project manager role and lead a team of tool makers. In this role you will be:- Read and interpret die drawings, CAD data, and sketches to identify information needed to produce an automotive metal stamping die.- Verify materials for type, grade, and dimensions, to ensure workpiece material is correct for the application according to engineering drawings.- Direct the fabrication, fitting, spotting, and assembly of dies and die sets.- Line up die components and assemblies to alignments and clearances required by engineering diagrams.- Set up and operate press for try-out and spotting of die.- Analyze and problem-solve any quality or functional defects in the die. Measure, modify, and re-test until the die passes final quality inspection.- Direct and organize the critical path of die build and trial to meet schedule constraints.- Analyze and rework tooling using circle grid analysis, CMM reports and blue spotting- Assist in training of apprentices.Advantages- shift flexibility. (4 weeks of day shift, 2 weeks of afternoons)- great starting pay rates: $24/hr to $33/hr depending on experience- very clean facility- focus on producing new die builds- benefits after 90 days- RRSP contribution after only 90 daysResponsibilities- Read and interpret die drawings, CAD data, and sketches to identify information needed to produce an automotive metal stamping die.- Verify materials for type, grade, and dimensions, to ensure workpiece material is correct for the application according to engineering drawings.- Direct the fabrication, fitting, spotting, and assembly of dies and die sets.- Line up die components and assemblies to alignments and clearances required by engineering diagrams.- Set up and operate press for try-out and spotting of die.- Analyze and problem-solve any quality or functional defects in the die. Measure, modify, and re-test until the die passes final quality inspection.- Direct and organize the critical path of die build and trial to meet schedule constraints.- Analyze and rework tooling using circle grid analysis, CMM reports and blue spotting- Assist in training of apprentices.Qualifications- Tool and die certification or equivalent experience- able to work in a team setting- able to work independently- 3 years experience in tool and die making SummaryWe have an exciting new opportunity for a Tool and Die maker in Windsor!! Our client in Windsor is expanding, and we need your help so that we can grow. We are looking for an experience tool and die maker, or someone who finished their apprenticeship and is looking to further their knowledge, as well as be a part of a company that is growing and does hire from within. Tool makers all have the opportunity to move into a project manager role and lead a team of tool makers. In this role you will be:- Read and interpret die drawings, CAD data, and sketches to identify information needed to produce an automotive metal stamping die.- Verify materials for type, grade, and dimensions, to ensure workpiece material is correct for the application according to engineering drawings.- Direct the fabrication, fitting, spotting, and assembly of dies and die sets.- Line up die components and assemblies to alignments and clearances required by engineering diagrams.- Set up and operate press for try-out and spotting of die.- Analyze and problem-solve any quality or functional defects in the die. Measure, modify, and re-test until the die passes final quality inspection.- Direct and organize the critical path of die build and trial to meet schedule constraints.- Analyze and rework tooling using circle grid analysis, CMM reports and blue spotting- Assist in training of apprentices.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    We have an exciting new opportunity for a Tool and Die maker in Windsor!! Our client in Windsor is expanding, and we need your help so that we can grow. We are looking for an experience tool and die maker, or someone who finished their apprenticeship and is looking to further their knowledge, as well as be a part of a company that is growing and does hire from within. Tool makers all have the opportunity to move into a project manager role and lead a team of tool makers. In this role you will be:- Read and interpret die drawings, CAD data, and sketches to identify information needed to produce an automotive metal stamping die.- Verify materials for type, grade, and dimensions, to ensure workpiece material is correct for the application according to engineering drawings.- Direct the fabrication, fitting, spotting, and assembly of dies and die sets.- Line up die components and assemblies to alignments and clearances required by engineering diagrams.- Set up and operate press for try-out and spotting of die.- Analyze and problem-solve any quality or functional defects in the die. Measure, modify, and re-test until the die passes final quality inspection.- Direct and organize the critical path of die build and trial to meet schedule constraints.- Analyze and rework tooling using circle grid analysis, CMM reports and blue spotting- Assist in training of apprentices.Advantages- shift flexibility. (4 weeks of day shift, 2 weeks of afternoons)- great starting pay rates: $24/hr to $33/hr depending on experience- very clean facility- focus on producing new die builds- benefits after 90 days- RRSP contribution after only 90 daysResponsibilities- Read and interpret die drawings, CAD data, and sketches to identify information needed to produce an automotive metal stamping die.- Verify materials for type, grade, and dimensions, to ensure workpiece material is correct for the application according to engineering drawings.- Direct the fabrication, fitting, spotting, and assembly of dies and die sets.- Line up die components and assemblies to alignments and clearances required by engineering diagrams.- Set up and operate press for try-out and spotting of die.- Analyze and problem-solve any quality or functional defects in the die. Measure, modify, and re-test until the die passes final quality inspection.- Direct and organize the critical path of die build and trial to meet schedule constraints.- Analyze and rework tooling using circle grid analysis, CMM reports and blue spotting- Assist in training of apprentices.Qualifications- Tool and die certification or equivalent experience- able to work in a team setting- able to work independently- 3 years experience in tool and die making SummaryWe have an exciting new opportunity for a Tool and Die maker in Windsor!! Our client in Windsor is expanding, and we need your help so that we can grow. We are looking for an experience tool and die maker, or someone who finished their apprenticeship and is looking to further their knowledge, as well as be a part of a company that is growing and does hire from within. Tool makers all have the opportunity to move into a project manager role and lead a team of tool makers. In this role you will be:- Read and interpret die drawings, CAD data, and sketches to identify information needed to produce an automotive metal stamping die.- Verify materials for type, grade, and dimensions, to ensure workpiece material is correct for the application according to engineering drawings.- Direct the fabrication, fitting, spotting, and assembly of dies and die sets.- Line up die components and assemblies to alignments and clearances required by engineering diagrams.- Set up and operate press for try-out and spotting of die.- Analyze and problem-solve any quality or functional defects in the die. Measure, modify, and re-test until the die passes final quality inspection.- Direct and organize the critical path of die build and trial to meet schedule constraints.- Analyze and rework tooling using circle grid analysis, CMM reports and blue spotting- Assist in training of apprentices.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • Oldcastle, Ontario
    • Permanent
    We have an exciting new opportunity for a Tool and Die maker in Windsor!! Our client in Windsor is expanding, and we need your help so that we can grow. We are looking for an experience tool and die maker, or someone who finished their apprenticeship and is looking to further their knowledge, as well as be a part of a company that is growing and does hire from within. Tool makers all have the opportunity to move into a project manager role and lead a team of tool makers. In this role you will be:- Read and interpret die drawings, CAD data, and sketches to identify information needed to produce an automotive metal stamping die.- Verify materials for type, grade, and dimensions, to ensure workpiece material is correct for the application according to engineering drawings.- Direct the fabrication, fitting, spotting, and assembly of dies and die sets.- Line up die components and assemblies to alignments and clearances required by engineering diagrams.- Set up and operate press for try-out and spotting of die.- Analyze and problem-solve any quality or functional defects in the die. Measure, modify, and re-test until the die passes final quality inspection.- Direct and organize the critical path of die build and trial to meet schedule constraints.- Analyze and rework tooling using circle grid analysis, CMM reports and blue spotting- Assist in training of apprentices.Advantages- shift flexibility. (4 weeks of day shift, 2 weeks of afternoons)- great starting pay rates: $24/hr to $33/hr depending on experience- very clean facility- focus on producing new die builds- benefits after 90 days- RRSP contribution after only 90 daysResponsibilities- Read and interpret die drawings, CAD data, and sketches to identify information needed to produce an automotive metal stamping die.- Verify materials for type, grade, and dimensions, to ensure workpiece material is correct for the application according to engineering drawings.- Direct the fabrication, fitting, spotting, and assembly of dies and die sets.- Line up die components and assemblies to alignments and clearances required by engineering diagrams.- Set up and operate press for try-out and spotting of die.- Analyze and problem-solve any quality or functional defects in the die. Measure, modify, and re-test until the die passes final quality inspection.- Direct and organize the critical path of die build and trial to meet schedule constraints.- Analyze and rework tooling using circle grid analysis, CMM reports and blue spotting- Assist in training of apprentices.Qualifications- Tool and die certification or equivalent experience- able to work in a team setting- able to work independently- 3 years experience in tool and die making SummaryWe have an exciting new opportunity for a Tool and Die maker in Windsor!! Our client in Windsor is expanding, and we need your help so that we can grow. We are looking for an experience tool and die maker, or someone who finished their apprenticeship and is looking to further their knowledge, as well as be a part of a company that is growing and does hire from within. Tool makers all have the opportunity to move into a project manager role and lead a team of tool makers. In this role you will be:- Read and interpret die drawings, CAD data, and sketches to identify information needed to produce an automotive metal stamping die.- Verify materials for type, grade, and dimensions, to ensure workpiece material is correct for the application according to engineering drawings.- Direct the fabrication, fitting, spotting, and assembly of dies and die sets.- Line up die components and assemblies to alignments and clearances required by engineering diagrams.- Set up and operate press for try-out and spotting of die.- Analyze and problem-solve any quality or functional defects in the die. Measure, modify, and re-test until the die passes final quality inspection.- Direct and organize the critical path of die build and trial to meet schedule constraints.- Analyze and rework tooling using circle grid analysis, CMM reports and blue spotting- Assist in training of apprentices.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    We have an exciting new opportunity for a Tool and Die maker in Windsor!! Our client in Windsor is expanding, and we need your help so that we can grow. We are looking for an experience tool and die maker, or someone who finished their apprenticeship and is looking to further their knowledge, as well as be a part of a company that is growing and does hire from within. Tool makers all have the opportunity to move into a project manager role and lead a team of tool makers. In this role you will be:- Read and interpret die drawings, CAD data, and sketches to identify information needed to produce an automotive metal stamping die.- Verify materials for type, grade, and dimensions, to ensure workpiece material is correct for the application according to engineering drawings.- Direct the fabrication, fitting, spotting, and assembly of dies and die sets.- Line up die components and assemblies to alignments and clearances required by engineering diagrams.- Set up and operate press for try-out and spotting of die.- Analyze and problem-solve any quality or functional defects in the die. Measure, modify, and re-test until the die passes final quality inspection.- Direct and organize the critical path of die build and trial to meet schedule constraints.- Analyze and rework tooling using circle grid analysis, CMM reports and blue spotting- Assist in training of apprentices.Advantages- shift flexibility. (4 weeks of day shift, 2 weeks of afternoons)- great starting pay rates: $24/hr to $33/hr depending on experience- very clean facility- focus on producing new die builds- benefits after 90 days- RRSP contribution after only 90 daysResponsibilities- Read and interpret die drawings, CAD data, and sketches to identify information needed to produce an automotive metal stamping die.- Verify materials for type, grade, and dimensions, to ensure workpiece material is correct for the application according to engineering drawings.- Direct the fabrication, fitting, spotting, and assembly of dies and die sets.- Line up die components and assemblies to alignments and clearances required by engineering diagrams.- Set up and operate press for try-out and spotting of die.- Analyze and problem-solve any quality or functional defects in the die. Measure, modify, and re-test until the die passes final quality inspection.- Direct and organize the critical path of die build and trial to meet schedule constraints.- Analyze and rework tooling using circle grid analysis, CMM reports and blue spotting- Assist in training of apprentices.Qualifications- Tool and die certification or equivalent experience- able to work in a team setting- able to work independently- 3 years experience in tool and die making SummaryWe have an exciting new opportunity for a Tool and Die maker in Windsor!! Our client in Windsor is expanding, and we need your help so that we can grow. We are looking for an experience tool and die maker, or someone who finished their apprenticeship and is looking to further their knowledge, as well as be a part of a company that is growing and does hire from within. Tool makers all have the opportunity to move into a project manager role and lead a team of tool makers. In this role you will be:- Read and interpret die drawings, CAD data, and sketches to identify information needed to produce an automotive metal stamping die.- Verify materials for type, grade, and dimensions, to ensure workpiece material is correct for the application according to engineering drawings.- Direct the fabrication, fitting, spotting, and assembly of dies and die sets.- Line up die components and assemblies to alignments and clearances required by engineering diagrams.- Set up and operate press for try-out and spotting of die.- Analyze and problem-solve any quality or functional defects in the die. Measure, modify, and re-test until the die passes final quality inspection.- Direct and organize the critical path of die build and trial to meet schedule constraints.- Analyze and rework tooling using circle grid analysis, CMM reports and blue spotting- Assist in training of apprentices.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • Oldcastle, Ontario
    • Permanent
    We have an exciting new opportunity for a Tool and Die maker in Windsor!! Our client in Windsor is expanding, and we need your help so that we can grow. We are looking for an experience tool and die maker, or someone who finished their apprenticeship and is looking to further their knowledge, as well as be a part of a company that is growing and does hire from within. Tool makers all have the opportunity to move into a project manager role and lead a team of tool makers. In this role you will be:- Read and interpret die drawings, CAD data, and sketches to identify information needed to produce an automotive metal stamping die.- Verify materials for type, grade, and dimensions, to ensure workpiece material is correct for the application according to engineering drawings.- Direct the fabrication, fitting, spotting, and assembly of dies and die sets.- Line up die components and assemblies to alignments and clearances required by engineering diagrams.- Set up and operate press for try-out and spotting of die.- Analyze and problem-solve any quality or functional defects in the die. Measure, modify, and re-test until the die passes final quality inspection.- Direct and organize the critical path of die build and trial to meet schedule constraints.- Analyze and rework tooling using circle grid analysis, CMM reports and blue spotting- Assist in training of apprentices.Advantages- shift flexibility. (4 weeks of day shift, 2 weeks of afternoons)- great starting pay rates: $24/hr to $33/hr depending on experience- very clean facility- focus on producing new die builds- benefits after 90 days- RRSP contribution after only 90 daysResponsibilities- Read and interpret die drawings, CAD data, and sketches to identify information needed to produce an automotive metal stamping die.- Verify materials for type, grade, and dimensions, to ensure workpiece material is correct for the application according to engineering drawings.- Direct the fabrication, fitting, spotting, and assembly of dies and die sets.- Line up die components and assemblies to alignments and clearances required by engineering diagrams.- Set up and operate press for try-out and spotting of die.- Analyze and problem-solve any quality or functional defects in the die. Measure, modify, and re-test until the die passes final quality inspection.- Direct and organize the critical path of die build and trial to meet schedule constraints.- Analyze and rework tooling using circle grid analysis, CMM reports and blue spotting- Assist in training of apprentices.Qualifications- Tool and die certification or equivalent experience- able to work in a team setting- able to work independently- 3 years experience in tool and die making SummaryWe have an exciting new opportunity for a Tool and Die maker in Windsor!! Our client in Windsor is expanding, and we need your help so that we can grow. We are looking for an experience tool and die maker, or someone who finished their apprenticeship and is looking to further their knowledge, as well as be a part of a company that is growing and does hire from within. Tool makers all have the opportunity to move into a project manager role and lead a team of tool makers. In this role you will be:- Read and interpret die drawings, CAD data, and sketches to identify information needed to produce an automotive metal stamping die.- Verify materials for type, grade, and dimensions, to ensure workpiece material is correct for the application according to engineering drawings.- Direct the fabrication, fitting, spotting, and assembly of dies and die sets.- Line up die components and assemblies to alignments and clearances required by engineering diagrams.- Set up and operate press for try-out and spotting of die.- Analyze and problem-solve any quality or functional defects in the die. Measure, modify, and re-test until the die passes final quality inspection.- Direct and organize the critical path of die build and trial to meet schedule constraints.- Analyze and rework tooling using circle grid analysis, CMM reports and blue spotting- Assist in training of apprentices.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    We have an exciting new opportunity for a Tool and Die maker in Windsor!! Our client in Windsor is expanding, and we need your help so that we can grow. We are looking for an experience tool and die maker, or someone who finished their apprenticeship and is looking to further their knowledge, as well as be a part of a company that is growing and does hire from within. Tool makers all have the opportunity to move into a project manager role and lead a team of tool makers. In this role you will be:- Read and interpret die drawings, CAD data, and sketches to identify information needed to produce an automotive metal stamping die.- Verify materials for type, grade, and dimensions, to ensure workpiece material is correct for the application according to engineering drawings.- Direct the fabrication, fitting, spotting, and assembly of dies and die sets.- Line up die components and assemblies to alignments and clearances required by engineering diagrams.- Set up and operate press for try-out and spotting of die.- Analyze and problem-solve any quality or functional defects in the die. Measure, modify, and re-test until the die passes final quality inspection.- Direct and organize the critical path of die build and trial to meet schedule constraints.- Analyze and rework tooling using circle grid analysis, CMM reports and blue spotting- Assist in training of apprentices.Advantages- shift flexibility. (4 weeks of day shift, 2 weeks of afternoons)- great starting pay rates: $24/hr to $33/hr depending on experience- very clean facility- focus on producing new die builds- benefits after 90 days- RRSP contribution after only 90 daysResponsibilities- Read and interpret die drawings, CAD data, and sketches to identify information needed to produce an automotive metal stamping die.- Verify materials for type, grade, and dimensions, to ensure workpiece material is correct for the application according to engineering drawings.- Direct the fabrication, fitting, spotting, and assembly of dies and die sets.- Line up die components and assemblies to alignments and clearances required by engineering diagrams.- Set up and operate press for try-out and spotting of die.- Analyze and problem-solve any quality or functional defects in the die. Measure, modify, and re-test until the die passes final quality inspection.- Direct and organize the critical path of die build and trial to meet schedule constraints.- Analyze and rework tooling using circle grid analysis, CMM reports and blue spotting- Assist in training of apprentices.Qualifications- Tool and die certification or equivalent experience- able to work in a team setting- able to work independently- 3 years experience in tool and die making SummaryWe have an exciting new opportunity for a Tool and Die maker in Windsor!! Our client in Windsor is expanding, and we need your help so that we can grow. We are looking for an experience tool and die maker, or someone who finished their apprenticeship and is looking to further their knowledge, as well as be a part of a company that is growing and does hire from within. Tool makers all have the opportunity to move into a project manager role and lead a team of tool makers. In this role you will be:- Read and interpret die drawings, CAD data, and sketches to identify information needed to produce an automotive metal stamping die.- Verify materials for type, grade, and dimensions, to ensure workpiece material is correct for the application according to engineering drawings.- Direct the fabrication, fitting, spotting, and assembly of dies and die sets.- Line up die components and assemblies to alignments and clearances required by engineering diagrams.- Set up and operate press for try-out and spotting of die.- Analyze and problem-solve any quality or functional defects in the die. Measure, modify, and re-test until the die passes final quality inspection.- Direct and organize the critical path of die build and trial to meet schedule constraints.- Analyze and rework tooling using circle grid analysis, CMM reports and blue spotting- Assist in training of apprentices.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    • Etobicoke, Ontario
    • Permanent
    Randstad has an immediate AFTERNOON shift opening for a Maintenance Technician role in the Etobicoke area. As a Maintenance Technician you will be responsible for the following critical tasks. Reporting directly to the on site Project ManagerThis position is responsible for performing highly diversified duties to troubleshoot, repair and maintain production and facility equipment. Keep safety at the top of minds. predictive and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives.Advantages- Straight Afternoon SHIFT- Competitive pay rate (based on experience, licensing and skill level)- Benefits plan- Excellent work atmosphere and colleaguesResponsibilities-Perform regular preventive maintenance (PM) on machines, equipment and plant facilities as per our PM program and schedule.-Assist in implementation of new equipment.-Maintain maintenance parts inventory by checking in / out parts on every transaction. Complete cycle counts &/or physical inventory as directed.-Perform building, maintenance, and electrical repairs as required to maintain the assets at base condition-Perform highly diversified duties to maintain production machines and the plant facility’s equipment.-Perform mechanic duties including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines.-Read and interpret equipment manuals and work orders to perform required maintenance and service.Qualifications442A3 years hands on experience in a manufacturing maintenance role3 years’ experience working with automated equipment (i.e. robotic palletizer machines and automated stretch wrapping machines)2 years forklift experience requiredcomfortable with heightsSummaryApply now, or if you would like more information about this opportunity email your resume. sarah.dinis@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
    Randstad has an immediate AFTERNOON shift opening for a Maintenance Technician role in the Etobicoke area. As a Maintenance Technician you will be responsible for the following critical tasks. Reporting directly to the on site Project ManagerThis position is responsible for performing highly diversified duties to troubleshoot, repair and maintain production and facility equipment. Keep safety at the top of minds. predictive and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives.Advantages- Straight Afternoon SHIFT- Competitive pay rate (based on experience, licensing and skill level)- Benefits plan- Excellent work atmosphere and colleaguesResponsibilities-Perform regular preventive maintenance (PM) on machines, equipment and plant facilities as per our PM program and schedule.-Assist in implementation of new equipment.-Maintain maintenance parts inventory by checking in / out parts on every transaction. Complete cycle counts &/or physical inventory as directed.-Perform building, maintenance, and electrical repairs as required to maintain the assets at base condition-Perform highly diversified duties to maintain production machines and the plant facility’s equipment.-Perform mechanic duties including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines.-Read and interpret equipment manuals and work orders to perform required maintenance and service.Qualifications442A3 years hands on experience in a manufacturing maintenance role3 years’ experience working with automated equipment (i.e. robotic palletizer machines and automated stretch wrapping machines)2 years forklift experience requiredcomfortable with heightsSummaryApply now, or if you would like more information about this opportunity email your resume. sarah.dinis@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Thank you for subscribing to your personalised job alerts.

explore over 12716 jobs with randstad.

It looks like you want to switch your language. This will reset your filters on your current job search.