You are successfully logged out of your my randstad account

You have successfully deleted your account

    Thank you for subscribing to your personalised job alerts.

    7 jobs found for Electrical Engineer

    filter2
    clear all
      • Burlington, Ontario
      • Permanent
      Our client located in Burlington is looking to add an Electrical Engineer to their hardware design team. This role is located out of Burlington however the qualified candidate must be able to travel internationally on project basis. This is a long term, permanent role for a person who has 5+ years of experience (P..Eng is an asset). Advantages- Competitive compensation with benefits- Company supported continuing education and opportunities for growth- Participating in developing industry-leading innovation with the freedom to be creative and take imitative - Team driven environment - Modern work environment - Collaborative mindset and company culture - Flexible work schedule - Opportunity to travel outside of Canada (International)Responsibilities- You will be part electrical hardware design team where you will be responsible for researching and developing control systems- You will be taking part of kick off meetings to determine the entire project scope, requirement, deliverables, budget, costing and schedules- You will work closely with the mechanical design team to confirm design details- Developing the equipment motor lists- Producing design documents, schematics and process control diagrams- Designing and developing drive panels and PLC control panels- Providing onsite installation, troubleshooting, debugging, commissioning and maintenance support for systems Qualifications- Electrical Engineering or related Degree with 5+ years of experience designing low voltage power distribution drive panels and PLC control panels- Advanced understanding of EPLAN (version 2.0 or above) - Advanced understanding of AutoCAD Electrical software or design and development of industrial electrical projects and documentation- Full understanding of Electrical Codes - - NFPA79, NEC, CEC, CSA and IEC/EN as well as Panel Design Standard UL5 08A is an asset- Detail Oriented- Excellent written and verbal communication skills in English- Ability to international travelling is a MUST- P.Eng license is an assetSummaryIf this a role you are interested in please apply or send your resume to Paulina Galinski at paulina.galinski@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our client located in Burlington is looking to add an Electrical Engineer to their hardware design team. This role is located out of Burlington however the qualified candidate must be able to travel internationally on project basis. This is a long term, permanent role for a person who has 5+ years of experience (P..Eng is an asset). Advantages- Competitive compensation with benefits- Company supported continuing education and opportunities for growth- Participating in developing industry-leading innovation with the freedom to be creative and take imitative - Team driven environment - Modern work environment - Collaborative mindset and company culture - Flexible work schedule - Opportunity to travel outside of Canada (International)Responsibilities- You will be part electrical hardware design team where you will be responsible for researching and developing control systems- You will be taking part of kick off meetings to determine the entire project scope, requirement, deliverables, budget, costing and schedules- You will work closely with the mechanical design team to confirm design details- Developing the equipment motor lists- Producing design documents, schematics and process control diagrams- Designing and developing drive panels and PLC control panels- Providing onsite installation, troubleshooting, debugging, commissioning and maintenance support for systems Qualifications- Electrical Engineering or related Degree with 5+ years of experience designing low voltage power distribution drive panels and PLC control panels- Advanced understanding of EPLAN (version 2.0 or above) - Advanced understanding of AutoCAD Electrical software or design and development of industrial electrical projects and documentation- Full understanding of Electrical Codes - - NFPA79, NEC, CEC, CSA and IEC/EN as well as Panel Design Standard UL5 08A is an asset- Detail Oriented- Excellent written and verbal communication skills in English- Ability to international travelling is a MUST- P.Eng license is an assetSummaryIf this a role you are interested in please apply or send your resume to Paulina Galinski at paulina.galinski@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Niagara Falls
      • Permanent
      Your challenge!We are looking for an exceptional Electrical Project Lead to join our team in Niagara Falls. Reporting to the Maintenance Manager, you support the plant on a day-to-day by utilizing  your knowledge and understanding of the design and implementation of E&I projects with 24/7 heavy industrial equipment. You undertake project management responsibilities to ensure all electrical projects are brought to completion in the most safe and time effective manner. To be successful in this position, you require knowledge in High voltage, Heavy industrial equipment and possess DC experience and must be an excellent team player with a safety first mindset.  Your ResponsibilitiesProjects overseeing include both capital improvements and mill modificationsDetermine project scopes and designs, bid specifications, cost estimates,  material procurement, drawing review, project inspection and processing of job completion requirements for electrical and automation related projectsParticipate in the development of process flow diagrams, piping and instrumentation diagrams as well as electrical and automation drawingsDesign, support, and evaluate automation and control systems to ensure efficient and safe facility operations. Participate in start-up and commissioning of mill E&I capital and modification as well as resolution of open issuesProvide direct support and guidance for programmable logic controllers (PLC), distributed process control systems (DCS), human machine interfaces (HMI), Historian data logging and reporting, and associated instrumentation  Your Background and StrengthsMinimum of 5 years’ experience working in a similar role   Knowledge of 480, 2300, 4160 and 12kV power distribution and protective relayingPractical knowledge in troubleshooting AC and DC motors, drives and startersBachelor's degree in Electrical Engineering is preferredExperience in a heavy 24/7 industrial manufacturing setting is a definite assetAbility to manage workload of multiple projects of varying complexityMust be proficient in Microsoft Office, and computer aided design applicationsExperience with SAP as ERP system is considered an asset #revealyourpotential #LifeAtCascadesCascades believes in the success of an inclusive organization that values diversity within its team. All qualified candidates will be considered for this position in a fair manner. Use of the masculine in our communications refers equally to both women and men.About CascadesTo be part of Cascades is to reveal the full potential of materials, people and ideas. We are source of possibilities.Since 1964, we have been providing sustainable, innovative and value-creating solutions in packaging, hygiene and recovery.Join 12,000 women and men working in a network of more than 90 operating units located in North America and Europe.  
      Your challenge!We are looking for an exceptional Electrical Project Lead to join our team in Niagara Falls. Reporting to the Maintenance Manager, you support the plant on a day-to-day by utilizing  your knowledge and understanding of the design and implementation of E&I projects with 24/7 heavy industrial equipment. You undertake project management responsibilities to ensure all electrical projects are brought to completion in the most safe and time effective manner. To be successful in this position, you require knowledge in High voltage, Heavy industrial equipment and possess DC experience and must be an excellent team player with a safety first mindset.  Your ResponsibilitiesProjects overseeing include both capital improvements and mill modificationsDetermine project scopes and designs, bid specifications, cost estimates,  material procurement, drawing review, project inspection and processing of job completion requirements for electrical and automation related projectsParticipate in the development of process flow diagrams, piping and instrumentation diagrams as well as electrical and automation drawingsDesign, support, and evaluate automation and control systems to ensure efficient and safe facility operations. Participate in start-up and commissioning of mill E&I capital and modification as well as resolution of open issuesProvide direct support and guidance for programmable logic controllers (PLC), distributed process control systems (DCS), human machine interfaces (HMI), Historian data logging and reporting, and associated instrumentation  Your Background and StrengthsMinimum of 5 years’ experience working in a similar role   Knowledge of 480, 2300, 4160 and 12kV power distribution and protective relayingPractical knowledge in troubleshooting AC and DC motors, drives and startersBachelor's degree in Electrical Engineering is preferredExperience in a heavy 24/7 industrial manufacturing setting is a definite assetAbility to manage workload of multiple projects of varying complexityMust be proficient in Microsoft Office, and computer aided design applicationsExperience with SAP as ERP system is considered an asset #revealyourpotential #LifeAtCascadesCascades believes in the success of an inclusive organization that values diversity within its team. All qualified candidates will be considered for this position in a fair manner. Use of the masculine in our communications refers equally to both women and men.About CascadesTo be part of Cascades is to reveal the full potential of materials, people and ideas. We are source of possibilities.Since 1964, we have been providing sustainable, innovative and value-creating solutions in packaging, hygiene and recovery.Join 12,000 women and men working in a network of more than 90 operating units located in North America and Europe.  
      • Concord, Ontario
      • Permanent
      Our steel producer client has partnered with us in the search for an Electrical Engineer to add to their engineering department.Role – Electrical Engineer - PLC HMI ProgrammingLocation – Vaughan/Concord areaIndustry - Steel ProducerSalary – Depends on experience + BonusUrgency – ASAPIf you are interested in this opportunity, please send your RESUME directly to Ankur Vaid at ankur.vaid@randstad.caStrong knowledge of PLC programming and HMI Programming is a Must.AdvantagesPosition Summary:Reporting directly to the Reliability Manager, is responsible for identifying and resolving control and drive system issues related to Process Control Systems and PLC programsHe/she has an Electrical Engineering degree (PEng or EIT*), with five or more years of progressive experience in a manufacturing plant or related industrial environment as well as experience with industrial electrical distribution and process control systems while leading and performing in a highly technical and production-oriented workplace. He /She reports on its status and effectiveness and ensures, through on-going condition-based monitoring, the state of the equipment to proactively address issues at the lowest cost possible. ResponsibilitiesResponsibilities:•Performing engineering design according to all applicable codes, standards, and industry best practices and related duties; including power system studies, equipment specifications and selection, management of vendor and/or equipment suppliers, power distribution layouts, grounding, cable distribution design, motor schematics, single line diagrams, lighting design and wiring design.•Coordinating project implementation with operations and maintenance while interfacing with electrical contractors, consulting engineers, and vendors.•Gathering and completing all the information related to electrical components and systems containing PLC programs, drawings, etc.•Managing cost, schedule, and scope of projects as well as prioritizing the ongoing activities.•Participating in all reliability improvement activities.•PLC programming as well as instrumentations setting up and configuration.•Supporting major maintenance and CAPEX projects as well as long-range electrical maintenance planning and management.•Constantly looking for continuous improvement opportunities while adhering to and promoting safe work practices.•Monitoring, troubleshooting, and determining the stability within a controlling system (drive speed/ torque controller or any process control loop) •Ensuring that documentation is current and reflects reality and is captured within the Maintenance Management system (i.e., MEX, other)•Performing routine electrical repair items as required•Must meet the physical demands of this position•Other duties as assigned for which he/she has received required training, possesses qualifications and/or is considered competentParticipating in plant safety, health, and environmental programs Carrying out duties and responsibilities as assigned by the reliability manager.QualificationsEducational and Experience Requirements for this position:•Degree in Electrical, Mechanical, or related engineering field•Working knowledge in reading electrical control system schematics and or programming logic•Minimum three (3) years of Process Control Systems practical experience.•Knowledge of related acts, guidelines, regulations and legislation and the PCS/SCADA Standards.•Computer skills including skill in MS Office, Access, PLC and HMI programming •Practical working knowledge of motor controls (A.C., D.C.), Motion servo controls, Allen-Bradley (or equivalent), Man-machine safety interfaces•Understanding of various industrial communication protocols•Basic knowledge of database and client-server model operation•Satisfactory criminal reference check in accordance with the company’s policySummaryIf you are interested in this opportunity, please send your resume directly to Ankur Vaid at ankur.vaid@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our steel producer client has partnered with us in the search for an Electrical Engineer to add to their engineering department.Role – Electrical Engineer - PLC HMI ProgrammingLocation – Vaughan/Concord areaIndustry - Steel ProducerSalary – Depends on experience + BonusUrgency – ASAPIf you are interested in this opportunity, please send your RESUME directly to Ankur Vaid at ankur.vaid@randstad.caStrong knowledge of PLC programming and HMI Programming is a Must.AdvantagesPosition Summary:Reporting directly to the Reliability Manager, is responsible for identifying and resolving control and drive system issues related to Process Control Systems and PLC programsHe/she has an Electrical Engineering degree (PEng or EIT*), with five or more years of progressive experience in a manufacturing plant or related industrial environment as well as experience with industrial electrical distribution and process control systems while leading and performing in a highly technical and production-oriented workplace. He /She reports on its status and effectiveness and ensures, through on-going condition-based monitoring, the state of the equipment to proactively address issues at the lowest cost possible. ResponsibilitiesResponsibilities:•Performing engineering design according to all applicable codes, standards, and industry best practices and related duties; including power system studies, equipment specifications and selection, management of vendor and/or equipment suppliers, power distribution layouts, grounding, cable distribution design, motor schematics, single line diagrams, lighting design and wiring design.•Coordinating project implementation with operations and maintenance while interfacing with electrical contractors, consulting engineers, and vendors.•Gathering and completing all the information related to electrical components and systems containing PLC programs, drawings, etc.•Managing cost, schedule, and scope of projects as well as prioritizing the ongoing activities.•Participating in all reliability improvement activities.•PLC programming as well as instrumentations setting up and configuration.•Supporting major maintenance and CAPEX projects as well as long-range electrical maintenance planning and management.•Constantly looking for continuous improvement opportunities while adhering to and promoting safe work practices.•Monitoring, troubleshooting, and determining the stability within a controlling system (drive speed/ torque controller or any process control loop) •Ensuring that documentation is current and reflects reality and is captured within the Maintenance Management system (i.e., MEX, other)•Performing routine electrical repair items as required•Must meet the physical demands of this position•Other duties as assigned for which he/she has received required training, possesses qualifications and/or is considered competentParticipating in plant safety, health, and environmental programs Carrying out duties and responsibilities as assigned by the reliability manager.QualificationsEducational and Experience Requirements for this position:•Degree in Electrical, Mechanical, or related engineering field•Working knowledge in reading electrical control system schematics and or programming logic•Minimum three (3) years of Process Control Systems practical experience.•Knowledge of related acts, guidelines, regulations and legislation and the PCS/SCADA Standards.•Computer skills including skill in MS Office, Access, PLC and HMI programming •Practical working knowledge of motor controls (A.C., D.C.), Motion servo controls, Allen-Bradley (or equivalent), Man-machine safety interfaces•Understanding of various industrial communication protocols•Basic knowledge of database and client-server model operation•Satisfactory criminal reference check in accordance with the company’s policySummaryIf you are interested in this opportunity, please send your resume directly to Ankur Vaid at ankur.vaid@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Vancouver, British Columbia
      • Permanent
      We are seeking an experienced Senior Electrical Hardware Engineer for an exciting opportunity with a cutting edge high tech manufacturing client of ours . Our clients products are robust with full custom ASIC/ASSP, embedded controller and FPGA based logic. The real world applications of these products can make a tremendous difference in medical device and other similar applications.Advantages-Excellent compensation-Excellent benefits (Extended Health Dental ,Life Insurance, Long Term Disability)-Relocation AllowanceResponsibilities● Bachelor’s or Master’s degree in electrical or electronics engineering, engineering-physics, or equivalent. ●Specification, design, implementation, and validation of the detector analog and digital electronics in application specific radiation detectors. ● Performing SPICE simulation, signal integrity analysis on existing detector module designs identifying the gaps and improving the designs ● Debugging and troubleshooting detector modules failing in the field, causing emissions etc. ● Board and module level integration of electronic components including FPGAs, uP, memories, and semicustom ASICs. ● Contributing to product improvement initiatives including reducing costs, enhancing yield, improving reliability, adding new customer value● Proactive identification of technologies that put our team in a leadership position to fulfill nextgeneration application requirements and customer needs. Qualifications● A minimum of 7 years designing electronic circuits ● Strong fundamental and experience in analog designs and simulation with SPICE tools ● Experience with schematic capture and PCB layout ● Experience designing power supply, high voltage and isolation circuits● Experience with signal integrity analysis of analog and digital signals ● Experience troubleshooting failing circuits and boards ● Experience with high speed digital circuitsHighly desired skills:● High voltage X-ray circuit design● Mixed signal including DSP, DAC/ADC● Experience with EMI/ Emissions testing. Using spectrometer, near field probes to identify the emission source● Altium PCB layout, Cadence Allegro electronic package/module design; Designing multi layer boards ● PCB thermal management ● Post layout analysis, experience with HDI is a plus ● Coding experience is a plus – Python, C++, HDLSummaryIf you would like to be considered for this opportunity, please forward your resume via email to Nick Paraskeva | nick.paraskeva@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      We are seeking an experienced Senior Electrical Hardware Engineer for an exciting opportunity with a cutting edge high tech manufacturing client of ours . Our clients products are robust with full custom ASIC/ASSP, embedded controller and FPGA based logic. The real world applications of these products can make a tremendous difference in medical device and other similar applications.Advantages-Excellent compensation-Excellent benefits (Extended Health Dental ,Life Insurance, Long Term Disability)-Relocation AllowanceResponsibilities● Bachelor’s or Master’s degree in electrical or electronics engineering, engineering-physics, or equivalent. ●Specification, design, implementation, and validation of the detector analog and digital electronics in application specific radiation detectors. ● Performing SPICE simulation, signal integrity analysis on existing detector module designs identifying the gaps and improving the designs ● Debugging and troubleshooting detector modules failing in the field, causing emissions etc. ● Board and module level integration of electronic components including FPGAs, uP, memories, and semicustom ASICs. ● Contributing to product improvement initiatives including reducing costs, enhancing yield, improving reliability, adding new customer value● Proactive identification of technologies that put our team in a leadership position to fulfill nextgeneration application requirements and customer needs. Qualifications● A minimum of 7 years designing electronic circuits ● Strong fundamental and experience in analog designs and simulation with SPICE tools ● Experience with schematic capture and PCB layout ● Experience designing power supply, high voltage and isolation circuits● Experience with signal integrity analysis of analog and digital signals ● Experience troubleshooting failing circuits and boards ● Experience with high speed digital circuitsHighly desired skills:● High voltage X-ray circuit design● Mixed signal including DSP, DAC/ADC● Experience with EMI/ Emissions testing. Using spectrometer, near field probes to identify the emission source● Altium PCB layout, Cadence Allegro electronic package/module design; Designing multi layer boards ● PCB thermal management ● Post layout analysis, experience with HDI is a plus ● Coding experience is a plus – Python, C++, HDLSummaryIf you would like to be considered for this opportunity, please forward your resume via email to Nick Paraskeva | nick.paraskeva@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Toronto, Ontario
      • Contract
      Are you a Senior Electrical Engineer with Mining project Experience?Are you looking for an opportunity with a dynamic organization that is growing?If so, this could be the role for you!Work will involve:• Leading an Electrical group in a growing Consulting Engineering environment• Electrical MV and LV distribution design and load calculations.• Power studies • Grounding studies • Electrical control system design and drawing packages.• RFQ for Equipment Vendors and Manufacturers.• Bid Evaluations from Equipment Vendors, Manufacturers and Contractors.• Single-line Diagrams, Layouts, Grounding, Lighting, Schematics, Cabling System design• Control loop diagrams• P&IDs, Selection and Procurement of instrumentation• Automation system design, network architecture, PLCs, HMIs• Functional Specifications, Design Criteria• Load Lists, Instrument Lists, Signal Lists, Cable Lists• Supervision of engineers, designers and drafters• Budget pricing• Project scheduling• Construction work package preparation• Preparation of MTO’s and cost estimates• Field inspection and on-site construction support• Startup and Commissioning supportAdvantagesAbility to work with a dynamic growing organization.Competitive compensation and an opportunity for long term work.Responsibilities• Electrical MV and LV distribution design and load calculations.• Power studies • Grounding studies • Electrical control system design and drawing packages.• RFQ for Equipment Vendors and Manufacturers.• Bid Evaluations from Equipment Vendors, Manufacturers and Contractors.• Single-line Diagrams, Layouts, Grounding, Lighting, Schematics, Cabling System design• Control loop diagrams• P&IDs, Selection and Procurement of instrumentation• Automation system design, network architecture, PLCs, HMIs• Functional Specifications, Design Criteria• Load Lists, Instrument Lists, Signal Lists, Cable Lists• Supervision of engineers, designers and drafters• Budget pricing• Project scheduling• Construction work package preparation• Preparation of MTO’s and cost estimates• Field inspection and on-site construction support• Startup and Commissioning supportQualificationsDegree in Electrical EngineeringExperience with established Consulting Engineering companiesMining Industry project experience an assetSummaryTo apply, email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you a Senior Electrical Engineer with Mining project Experience?Are you looking for an opportunity with a dynamic organization that is growing?If so, this could be the role for you!Work will involve:• Leading an Electrical group in a growing Consulting Engineering environment• Electrical MV and LV distribution design and load calculations.• Power studies • Grounding studies • Electrical control system design and drawing packages.• RFQ for Equipment Vendors and Manufacturers.• Bid Evaluations from Equipment Vendors, Manufacturers and Contractors.• Single-line Diagrams, Layouts, Grounding, Lighting, Schematics, Cabling System design• Control loop diagrams• P&IDs, Selection and Procurement of instrumentation• Automation system design, network architecture, PLCs, HMIs• Functional Specifications, Design Criteria• Load Lists, Instrument Lists, Signal Lists, Cable Lists• Supervision of engineers, designers and drafters• Budget pricing• Project scheduling• Construction work package preparation• Preparation of MTO’s and cost estimates• Field inspection and on-site construction support• Startup and Commissioning supportAdvantagesAbility to work with a dynamic growing organization.Competitive compensation and an opportunity for long term work.Responsibilities• Electrical MV and LV distribution design and load calculations.• Power studies • Grounding studies • Electrical control system design and drawing packages.• RFQ for Equipment Vendors and Manufacturers.• Bid Evaluations from Equipment Vendors, Manufacturers and Contractors.• Single-line Diagrams, Layouts, Grounding, Lighting, Schematics, Cabling System design• Control loop diagrams• P&IDs, Selection and Procurement of instrumentation• Automation system design, network architecture, PLCs, HMIs• Functional Specifications, Design Criteria• Load Lists, Instrument Lists, Signal Lists, Cable Lists• Supervision of engineers, designers and drafters• Budget pricing• Project scheduling• Construction work package preparation• Preparation of MTO’s and cost estimates• Field inspection and on-site construction support• Startup and Commissioning supportQualificationsDegree in Electrical EngineeringExperience with established Consulting Engineering companiesMining Industry project experience an assetSummaryTo apply, email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Vancouver, British Columbia
      • Permanent
      We are seeking an experienced Electrical Engineer with an analog/mixed signal background for an opportunity with a well established manufacturing client of ours in the clean energy industry. Our client is experiencing rapid growth and has the ability to provide rapid career advancement and a challenging and rewarding work environment. Advantages-Industry leading compensation-Excellent benefits-Flexible work environmentResponsibilitiesThis role is responsible for providing electronics hardware, firmware, and embedded systems engineering input to new product development projects and will need to understand the physics behind the design. They will be specifically involved in helping the design and development of new controls or algorithms, and system testing both in the lab and on real products Provide new product development support, specific to microprocessors/microcontrollers in the Clean Energy product area including; Creating and maintaining CAD models, drawings, and BOMs, Supporting product development plans (schedule, product cost, meeting design inputs), Interfacing with internal company personnel, Provide technical support for assigned projects.• Design of new control algorithms and performing Applications Engineering• Firmware architecture design;• Design embedded circuits using microprocessors/microcontrollers• Design embedded circuits encompassing both analog and digital circuitry• Design embedded circuits encompassing power electronics• Create, design and develop test specifications for new systems and firmware/software.• Conducts and evaluates test specification including testing firmware/hardware• Ensures project documentation, test procedures and manuals are accurate and complete• Take part in Design for Manufacturability and Design for Test Activities• Collaborates with internal manufacturing partners, contract manufacturers, designers and product specialists to optimize basic designs for manufacturability.• Utilizes simulation tools• Create and modify schematics using CAD tools• Create PC based testing tools• Troubleshoot designs to the component level• Participate in design reviewsQualifications• Bachelor of Science in Electrical Engineering, Computer Engineering, Computer Science or directly related Engineering discipline• 5 years of experience with Object Oriented languages: C++,C#, JavaPREFERRED QUALIFICATIONS:• Masters of Science or PhD in Electrical Engineering, Computer Engineering, or directly related Engineering degree• Experience with high voltage, high current power systems• Experience with IRQs and processor cycle timing• ARM ASM knowledge• Experience in RTOS, state machine and algorithm design using the “C” language• Experience in both analog and digital design utilizing microcontrollers• Experience of microprocessor hardware interfacing techniques (e.g. IIC, SPIbus, EEprom, etc.)• Experience in new product design and development• Experience with schematic capture toolsSummaryIf you would like to be considered for this opportunity, please forward your resume via email to Nick Paraskeva | nick.paraskeva@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      We are seeking an experienced Electrical Engineer with an analog/mixed signal background for an opportunity with a well established manufacturing client of ours in the clean energy industry. Our client is experiencing rapid growth and has the ability to provide rapid career advancement and a challenging and rewarding work environment. Advantages-Industry leading compensation-Excellent benefits-Flexible work environmentResponsibilitiesThis role is responsible for providing electronics hardware, firmware, and embedded systems engineering input to new product development projects and will need to understand the physics behind the design. They will be specifically involved in helping the design and development of new controls or algorithms, and system testing both in the lab and on real products Provide new product development support, specific to microprocessors/microcontrollers in the Clean Energy product area including; Creating and maintaining CAD models, drawings, and BOMs, Supporting product development plans (schedule, product cost, meeting design inputs), Interfacing with internal company personnel, Provide technical support for assigned projects.• Design of new control algorithms and performing Applications Engineering• Firmware architecture design;• Design embedded circuits using microprocessors/microcontrollers• Design embedded circuits encompassing both analog and digital circuitry• Design embedded circuits encompassing power electronics• Create, design and develop test specifications for new systems and firmware/software.• Conducts and evaluates test specification including testing firmware/hardware• Ensures project documentation, test procedures and manuals are accurate and complete• Take part in Design for Manufacturability and Design for Test Activities• Collaborates with internal manufacturing partners, contract manufacturers, designers and product specialists to optimize basic designs for manufacturability.• Utilizes simulation tools• Create and modify schematics using CAD tools• Create PC based testing tools• Troubleshoot designs to the component level• Participate in design reviewsQualifications• Bachelor of Science in Electrical Engineering, Computer Engineering, Computer Science or directly related Engineering discipline• 5 years of experience with Object Oriented languages: C++,C#, JavaPREFERRED QUALIFICATIONS:• Masters of Science or PhD in Electrical Engineering, Computer Engineering, or directly related Engineering degree• Experience with high voltage, high current power systems• Experience with IRQs and processor cycle timing• ARM ASM knowledge• Experience in RTOS, state machine and algorithm design using the “C” language• Experience in both analog and digital design utilizing microcontrollers• Experience of microprocessor hardware interfacing techniques (e.g. IIC, SPIbus, EEprom, etc.)• Experience in new product design and development• Experience with schematic capture toolsSummaryIf you would like to be considered for this opportunity, please forward your resume via email to Nick Paraskeva | nick.paraskeva@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Piscataway
      • Permanent
      Your challenge!Reporting to the General Manager, the Plant Manager - Succesion's  mission is to support the current Plant Manager in establishing the unit’s performance standards and achieving the established objectives by developing an action plan that respects business rules and processes as well as best manufacturing practices.  You will be paired with the existing Plant Manager and undergo a 18month  to 24months mentoring period where you will be exposed to various department and decision making processes of your assigned plant under the responsibility of the current Plant Manager. When the mentoring period is completed and the Plant Manager -Succession has gained all the necessary knowledge, the candidate will be relocated to the facility requiring a Plant Manager. You therefore participate in the implementation of specific processes, practices and tools within your unit aimed at optimizing operational efficiency while prioritizing health and safety. You also use your leadership to build a mobilized and competent team and support their production efforts while nurturing a culture of continuous improvement and health and safety. As a result, you promote the achievement of your unit's business objectives by positively influencing the adoption of healthy and safe behaviours, operating costs, performance and production capacity and quality.Your responsibilitiesEnsure the safety of its employeesEnsure optimal execution of operations by achieving targets in terms of occupational health and safety, production capacity, standardization of operating costs and qualityEnsure compliance with business processesPrepare and execute investment and asset maintenance plans, and meet return on investment targetsEngage and develop all your employeesEnsure the execution of the Collective Bargaining Agreement/Employee Handbook and highlight areas for improvement with the union/committeeMaintain a safe environment for its employees and eliminate risksEnsure the application of all of Cascades’ processes in the plant in compliance with business rules and established best practicesEstablish performance standards (availability, efficiency, OEE) in collaboration with the General ManagerLead weekly meetings with your team and SUs to analyze KPIs, and discuss and launch required action plansCollaborate in the implementation of optimization projects specific to your unitFoster a culture of continuous improvementYour background and strengthsBachelor's degree in Mechanical or Electrical engineer will be considered an assetExtensive experience in management in the manufacturing environmentLeadership and a collaborative spirit that inspire and engage teams to achieve excellenceWillingness to relocate after the mentorship periodAbility to understand customer needs, issues and interests in order to develop solutions that support their experienceSound judgment to ensure follow-up and effective implementation of solutions in accordance with company priorities and to make appropriate decisionsStrong communication skills, tact and diplomacy#revealyourpotential  #LifeAtCascadesCascades believes in the success of an inclusive organization that values diversity within its team. It will fairly consider all those qualified for this position. The use of the masculine in our communication refers to both women and men. About Cascades Being part of Cascades means revealing the full potential of matter, people and ideas. We are a source of possibilities. Since 1964, we have been offering sustainable, innovative and value-creating solutions in terms of packaging, hygiene and recovery. Join 12,000 women and men working in a network of more than 90 business units located in North America and Europe. 
      Your challenge!Reporting to the General Manager, the Plant Manager - Succesion's  mission is to support the current Plant Manager in establishing the unit’s performance standards and achieving the established objectives by developing an action plan that respects business rules and processes as well as best manufacturing practices.  You will be paired with the existing Plant Manager and undergo a 18month  to 24months mentoring period where you will be exposed to various department and decision making processes of your assigned plant under the responsibility of the current Plant Manager. When the mentoring period is completed and the Plant Manager -Succession has gained all the necessary knowledge, the candidate will be relocated to the facility requiring a Plant Manager. You therefore participate in the implementation of specific processes, practices and tools within your unit aimed at optimizing operational efficiency while prioritizing health and safety. You also use your leadership to build a mobilized and competent team and support their production efforts while nurturing a culture of continuous improvement and health and safety. As a result, you promote the achievement of your unit's business objectives by positively influencing the adoption of healthy and safe behaviours, operating costs, performance and production capacity and quality.Your responsibilitiesEnsure the safety of its employeesEnsure optimal execution of operations by achieving targets in terms of occupational health and safety, production capacity, standardization of operating costs and qualityEnsure compliance with business processesPrepare and execute investment and asset maintenance plans, and meet return on investment targetsEngage and develop all your employeesEnsure the execution of the Collective Bargaining Agreement/Employee Handbook and highlight areas for improvement with the union/committeeMaintain a safe environment for its employees and eliminate risksEnsure the application of all of Cascades’ processes in the plant in compliance with business rules and established best practicesEstablish performance standards (availability, efficiency, OEE) in collaboration with the General ManagerLead weekly meetings with your team and SUs to analyze KPIs, and discuss and launch required action plansCollaborate in the implementation of optimization projects specific to your unitFoster a culture of continuous improvementYour background and strengthsBachelor's degree in Mechanical or Electrical engineer will be considered an assetExtensive experience in management in the manufacturing environmentLeadership and a collaborative spirit that inspire and engage teams to achieve excellenceWillingness to relocate after the mentorship periodAbility to understand customer needs, issues and interests in order to develop solutions that support their experienceSound judgment to ensure follow-up and effective implementation of solutions in accordance with company priorities and to make appropriate decisionsStrong communication skills, tact and diplomacy#revealyourpotential  #LifeAtCascadesCascades believes in the success of an inclusive organization that values diversity within its team. It will fairly consider all those qualified for this position. The use of the masculine in our communication refers to both women and men. About Cascades Being part of Cascades means revealing the full potential of matter, people and ideas. We are a source of possibilities. Since 1964, we have been offering sustainable, innovative and value-creating solutions in terms of packaging, hygiene and recovery. Join 12,000 women and men working in a network of more than 90 business units located in North America and Europe. 

    Thank you for subscribing to your personalised job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.