Thank you for subscribing to your personalised job alerts.

    17 jobs found in Concord, Ontario

    filter3
    clear all
      • Concord, Ontario
      • Contract
      We are looking to hire an Electronics test Professional for one of our global clients in the Concord area.The incumbent will be working in a dynamic team focusing n the electronics field and debugging digital & analog circuitries with excellent networking equipment hardware and software knowledge in a market-leading organization.AdvantagesThis is a 6-month long contract with a strong possibility of extension or being hired perm.Responsibilities• Hardware troubleshooting and failure analysisProvide technical training and support to production, repair service team and NPI qualification team• First line of contact for any difficult, unusual or critical failures• Provide DFS (Design for serviceability), DFM (Design for Manufacturing) & DFT (Design for Testing) feedback• Maintains professional skills and knowledge of emerging technologies necessary to execute the functions of a senior technician and training other team members• Work closely with Hardware & Software design teams to gain required knowledge on new products to train the repair service teamQualifications• Electronic diploma or equivalent• Engineering degree is considered an asset• Minimum 10 years of experience working as a technician in the electronics field and debugging digital & analog circuitries• Hands-on and fluent with lab equipment including spectrum analyzer, signal generator, oscilloscope, data logger, etc.• Excellent networking equipment hardware and software knowledge• Hands-on experience in prototype work and functional verification• Self-starter and Team Player• Excellent communication skills both verbal & written• Computer skills and good mechanical aptitude• Strong electronic knowledge• Work well under pressure with attention to detail• Experience in through-hole and SMT component solderingSummaryIf this sounds like a challenging next role for you then apply online today or send in your resume directly to swapna.nair@randstad.ca**ONLY QUALIFIED CANDIDATES WOULD BE CONTACTED.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      We are looking to hire an Electronics test Professional for one of our global clients in the Concord area.The incumbent will be working in a dynamic team focusing n the electronics field and debugging digital & analog circuitries with excellent networking equipment hardware and software knowledge in a market-leading organization.AdvantagesThis is a 6-month long contract with a strong possibility of extension or being hired perm.Responsibilities• Hardware troubleshooting and failure analysisProvide technical training and support to production, repair service team and NPI qualification team• First line of contact for any difficult, unusual or critical failures• Provide DFS (Design for serviceability), DFM (Design for Manufacturing) & DFT (Design for Testing) feedback• Maintains professional skills and knowledge of emerging technologies necessary to execute the functions of a senior technician and training other team members• Work closely with Hardware & Software design teams to gain required knowledge on new products to train the repair service teamQualifications• Electronic diploma or equivalent• Engineering degree is considered an asset• Minimum 10 years of experience working as a technician in the electronics field and debugging digital & analog circuitries• Hands-on and fluent with lab equipment including spectrum analyzer, signal generator, oscilloscope, data logger, etc.• Excellent networking equipment hardware and software knowledge• Hands-on experience in prototype work and functional verification• Self-starter and Team Player• Excellent communication skills both verbal & written• Computer skills and good mechanical aptitude• Strong electronic knowledge• Work well under pressure with attention to detail• Experience in through-hole and SMT component solderingSummaryIf this sounds like a challenging next role for you then apply online today or send in your resume directly to swapna.nair@randstad.ca**ONLY QUALIFIED CANDIDATES WOULD BE CONTACTED.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Ottawa, Ontario
      • Contract
      Under the supervision of the Manager, Maintenance/ Lead Technicians; the Equipment Technician’s primary responsibility is to support and perform maintenance of all Manufacturing equipment and related equipment issues. Duties and Responsibilities•Provides support and performs maintenance for all card Manufacturing equipment & related issues. Monitor, maintain and calibrate equipment in areas such as the card assembly line, HVAC units for card line enclosure, building air compressor, in according with approved procedures•Provides support to daily card production, R&D experiments and potential future projects•Assists in the determination of root cause of failures and problems with automation equipment. Communicates effectively, verbally and in writing, to various groups affiliated with card manufacturing•Assesses multiple process variables and their interactions and then provides a reasoned, rapid response to issues revealed by test results•Troubleshooting and repair of equipment failures and operational problems•Documentation of equipment maintenance activities in maintenance logs •Performs calibration procedures•Provides support as required for equipment mechanical and control system issues•Communicates equipment-related issues with Manufacturing and Mechanical Engineering•Creates consumables used in certain automated operations•Complies with documentation requirements to ensure equipment and production records are completed accuratelyAdvantagesKey Contacts•Reports directly to Manager, Maintenance.•Perform shift duties assigned by Lead technician.•Frequent interaction with engineers, Lead technicians, and card production operatorsResponsibilities•Flexibility to work overtime and on different shifts as required•Noisy and fast-paced manufacturing environment•Ability to work independently and take appropriate action as required•Flexibility to respond to a changing and evolving environment including the ability to interact effectively with all levels of the organization •Ability to participate in process, product, equipment, and component validations and verifications (e.g. new product introductions)•Adheres to change control protocols and maintenance procedures typical of medical device manufacturing settings•Excellent oral and written communication skills •Ability to work effectively in a team environment while satisfying personal responsibilities•Ready to speak up about concerns•PhysicaloManual dexterity oAbility to distinguish between coloursoExtended periods of standing and walkingoOccasional kneeling and crouchingQualifications•[Mechanical or Electrical Technician Diploma and/or an acceptable combination of education and experience •Mechanical and/or automation aptitude toward equipment troubleshooting and root cause analysis is considered as key asset•Familiarity with operation, assembly, and maintenance of electro-mechanical equipment•Experience working in a medical device manufacturing or electronic manufacturing setting is considered an asset•Proficient knowledge of MS Office (Word, Excel, Outlook, etc.)SummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.ca Thank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Under the supervision of the Manager, Maintenance/ Lead Technicians; the Equipment Technician’s primary responsibility is to support and perform maintenance of all Manufacturing equipment and related equipment issues. Duties and Responsibilities•Provides support and performs maintenance for all card Manufacturing equipment & related issues. Monitor, maintain and calibrate equipment in areas such as the card assembly line, HVAC units for card line enclosure, building air compressor, in according with approved procedures•Provides support to daily card production, R&D experiments and potential future projects•Assists in the determination of root cause of failures and problems with automation equipment. Communicates effectively, verbally and in writing, to various groups affiliated with card manufacturing•Assesses multiple process variables and their interactions and then provides a reasoned, rapid response to issues revealed by test results•Troubleshooting and repair of equipment failures and operational problems•Documentation of equipment maintenance activities in maintenance logs •Performs calibration procedures•Provides support as required for equipment mechanical and control system issues•Communicates equipment-related issues with Manufacturing and Mechanical Engineering•Creates consumables used in certain automated operations•Complies with documentation requirements to ensure equipment and production records are completed accuratelyAdvantagesKey Contacts•Reports directly to Manager, Maintenance.•Perform shift duties assigned by Lead technician.•Frequent interaction with engineers, Lead technicians, and card production operatorsResponsibilities•Flexibility to work overtime and on different shifts as required•Noisy and fast-paced manufacturing environment•Ability to work independently and take appropriate action as required•Flexibility to respond to a changing and evolving environment including the ability to interact effectively with all levels of the organization •Ability to participate in process, product, equipment, and component validations and verifications (e.g. new product introductions)•Adheres to change control protocols and maintenance procedures typical of medical device manufacturing settings•Excellent oral and written communication skills •Ability to work effectively in a team environment while satisfying personal responsibilities•Ready to speak up about concerns•PhysicaloManual dexterity oAbility to distinguish between coloursoExtended periods of standing and walkingoOccasional kneeling and crouchingQualifications•[Mechanical or Electrical Technician Diploma and/or an acceptable combination of education and experience •Mechanical and/or automation aptitude toward equipment troubleshooting and root cause analysis is considered as key asset•Familiarity with operation, assembly, and maintenance of electro-mechanical equipment•Experience working in a medical device manufacturing or electronic manufacturing setting is considered an asset•Proficient knowledge of MS Office (Word, Excel, Outlook, etc.)SummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.ca Thank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Ottawa, Ontario
      • Contract
      Primary Responsibilities • Purchase the highest quality materials at the lowest possible cost in correct amounts per specifications and drawings with buyouts. • Interface with various other departments and disciplines to evaluate and monitor contract performance, ensuring compliance with contractual obligations.• Confer with staff, users and vendors to discuss defective or unacceptable goods or service and determine corrective action. • Leverage vendors/subcontractors across multiple procurements to create cost savings to project(s).• Research and evaluate suppliers based on price, quality, selection, service, support, availability, reliability, production and distribution capabilities and the supplier’s reputation and history. • Participate in the supplier bid evaluation, bid analyst, development of terms and conditions and recommendations for commercial contracts. • Monitor shipments to ensure goods come in on time and resolve problems related to undelivered goods. • Prepare/issue Request for Proposals (RFP’s) and evaluate vendor/subcontractor proposals to identify vendors/subcontractors who meet project constraints of budget and schedule at the estimating, execution and site purchasing levels.Qualifications• Proficient in Microsoft Office (Power Point, Word, Excel) and have a general knowledge of database utilization; SAP Experience a plus • Bachelor’s degree in construction management, business, engineering, supply chain management, or equivalent degree or military experience• At least five years’ experience in an engineering and/or construction related role• Thorough understanding and at least five years’ experience in contract administration and RFP’s • Detail-oriented, highly motivated with ability to effectively manage time • Excellent interpersonal, written and verbal communication skills• Team player with the ability to work independently to meet deadlines, goals and objectives• Must be bilingual in French and EnglishPlease send your resume in confidence to paul.dusome@randstad.caAdvantagesCandidate must be bilingual (English & French) • Purchase the highest quality materials at the lowest possible cost in correct amounts per specifications and drawings with buyouts. • Interface with various other departments and disciplines to evaluate and monitor contract performance, ensuring compliance with contractual obligations.ResponsibilitiesPrimary Responsibilities • Purchase the highest quality materials at the lowest possible cost in correct amounts per specifications and drawings with buyouts. • Interface with various other departments and disciplines to evaluate and monitor contract performance, ensuring compliance with contractual obligations.• Confer with staff, users and vendors to discuss defective or unacceptable goods or service and determine corrective action. • Leverage vendors/subcontractors across multiple procurements to create cost savings to project(s).• Research and evaluate suppliers based on price, quality, selection, service, support, availability, reliability, production and distribution capabilities and the supplier’s reputation and history. • Participate in the supplier bid evaluation, bid analyst, development of terms and conditions and recommendations for commercial contracts. • Monitor shipments to ensure goods come in on time and resolve problems related to undelivered goods. • Prepare/issue Request for Proposals (RFP’s) and evaluate vendor/subcontractor proposals to identify vendors/subcontractors who meet project constraints of budget and schedule at the estimating, execution and site purchasing levels.Qualifications• Proficient in Microsoft Office (Power Point, Word, Excel) and have a general knowledge of database utilization; SAP Experience a plus • Bachelor’s degree in construction management, business, engineering, supply chain management, or equivalent degree or military experience• At least five years’ experience in an engineering and/or construction related role• Thorough understanding and at least five years’ experience in contract administration and RFP’s • Detail-oriented, highly motivated with ability to effectively manage time • Excellent interpersonal, written and verbal communication skills• Team player with the ability to work independently to meet deadlines, goals and objectives• Must be bilingual in French and EnglishPlease send your resume in confidence to paul.dusome@randstad.caQualificationsQualifications• Proficient in Microsoft Office (Power Point, Word, Excel) and have a general knowledge of database utilization; SAP Experience a plus • Bachelor’s degree in construction management, business, engineering, supply chain management, or equivalent degree or military experience• At least five years’ experience in an engineering and/or construction related role• Thorough understanding and at least five years’ experience in contract administration and RFP’s • Detail-oriented, highly motivated with ability to effectively manage time • Excellent interpersonal, written and verbal communication skills• Team player with the ability to work independently to meet deadlines, goals and objectives• Must be bilingual in French and EnglishSummaryPrimary Responsibilities • Purchase the highest quality materials at the lowest possible cost in correct amounts per specifications and drawings with buyouts. • Interface with various other departments and disciplines to evaluate and monitor contract performance, ensuring compliance with contractual obligations.• Confer with staff, users and vendors to discuss defective or unacceptable goods or service and determine corrective action. • Leverage vendors/subcontractors across multiple procurements to create cost savings to project(s).• Research and evaluate suppliers based on price, quality, selection, service, support, availability, reliability, production and distribution capabilities and the supplier’s reputation and history. • Participate in the supplier bid evaluation, bid analyst, development of terms and conditions and recommendations for commercial contracts. • Monitor shipments to ensure goods come in on time and resolve problems related to undelivered goods. • Prepare/issue Request for Proposals (RFP’s) and evaluate vendor/subcontractor proposals to identify vendors/subcontractors who meet project constraints of budget and schedule at the estimating, execution and site purchasing levels.Qualifications• Proficient in Microsoft Office (Power Point, Word, Excel) and have a general knowledge of database utilization; SAP Experience a plus • Bachelor’s degree in construction management, business, engineering, supply chain management, or equivalent degree or military experience• At least five years’ experience in an engineering and/or construction related role• Thorough understanding and at least five years’ experience in contract administration and RFP’s • Detail-oriented, highly motivated with ability to effectively manage time • Excellent interpersonal, written and verbal communication skills• Team player with the ability to work independently to meet deadlines, goals and objectives• Must be bilingual in French and EnglishPlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Primary Responsibilities • Purchase the highest quality materials at the lowest possible cost in correct amounts per specifications and drawings with buyouts. • Interface with various other departments and disciplines to evaluate and monitor contract performance, ensuring compliance with contractual obligations.• Confer with staff, users and vendors to discuss defective or unacceptable goods or service and determine corrective action. • Leverage vendors/subcontractors across multiple procurements to create cost savings to project(s).• Research and evaluate suppliers based on price, quality, selection, service, support, availability, reliability, production and distribution capabilities and the supplier’s reputation and history. • Participate in the supplier bid evaluation, bid analyst, development of terms and conditions and recommendations for commercial contracts. • Monitor shipments to ensure goods come in on time and resolve problems related to undelivered goods. • Prepare/issue Request for Proposals (RFP’s) and evaluate vendor/subcontractor proposals to identify vendors/subcontractors who meet project constraints of budget and schedule at the estimating, execution and site purchasing levels.Qualifications• Proficient in Microsoft Office (Power Point, Word, Excel) and have a general knowledge of database utilization; SAP Experience a plus • Bachelor’s degree in construction management, business, engineering, supply chain management, or equivalent degree or military experience• At least five years’ experience in an engineering and/or construction related role• Thorough understanding and at least five years’ experience in contract administration and RFP’s • Detail-oriented, highly motivated with ability to effectively manage time • Excellent interpersonal, written and verbal communication skills• Team player with the ability to work independently to meet deadlines, goals and objectives• Must be bilingual in French and EnglishPlease send your resume in confidence to paul.dusome@randstad.caAdvantagesCandidate must be bilingual (English & French) • Purchase the highest quality materials at the lowest possible cost in correct amounts per specifications and drawings with buyouts. • Interface with various other departments and disciplines to evaluate and monitor contract performance, ensuring compliance with contractual obligations.ResponsibilitiesPrimary Responsibilities • Purchase the highest quality materials at the lowest possible cost in correct amounts per specifications and drawings with buyouts. • Interface with various other departments and disciplines to evaluate and monitor contract performance, ensuring compliance with contractual obligations.• Confer with staff, users and vendors to discuss defective or unacceptable goods or service and determine corrective action. • Leverage vendors/subcontractors across multiple procurements to create cost savings to project(s).• Research and evaluate suppliers based on price, quality, selection, service, support, availability, reliability, production and distribution capabilities and the supplier’s reputation and history. • Participate in the supplier bid evaluation, bid analyst, development of terms and conditions and recommendations for commercial contracts. • Monitor shipments to ensure goods come in on time and resolve problems related to undelivered goods. • Prepare/issue Request for Proposals (RFP’s) and evaluate vendor/subcontractor proposals to identify vendors/subcontractors who meet project constraints of budget and schedule at the estimating, execution and site purchasing levels.Qualifications• Proficient in Microsoft Office (Power Point, Word, Excel) and have a general knowledge of database utilization; SAP Experience a plus • Bachelor’s degree in construction management, business, engineering, supply chain management, or equivalent degree or military experience• At least five years’ experience in an engineering and/or construction related role• Thorough understanding and at least five years’ experience in contract administration and RFP’s • Detail-oriented, highly motivated with ability to effectively manage time • Excellent interpersonal, written and verbal communication skills• Team player with the ability to work independently to meet deadlines, goals and objectives• Must be bilingual in French and EnglishPlease send your resume in confidence to paul.dusome@randstad.caQualificationsQualifications• Proficient in Microsoft Office (Power Point, Word, Excel) and have a general knowledge of database utilization; SAP Experience a plus • Bachelor’s degree in construction management, business, engineering, supply chain management, or equivalent degree or military experience• At least five years’ experience in an engineering and/or construction related role• Thorough understanding and at least five years’ experience in contract administration and RFP’s • Detail-oriented, highly motivated with ability to effectively manage time • Excellent interpersonal, written and verbal communication skills• Team player with the ability to work independently to meet deadlines, goals and objectives• Must be bilingual in French and EnglishSummaryPrimary Responsibilities • Purchase the highest quality materials at the lowest possible cost in correct amounts per specifications and drawings with buyouts. • Interface with various other departments and disciplines to evaluate and monitor contract performance, ensuring compliance with contractual obligations.• Confer with staff, users and vendors to discuss defective or unacceptable goods or service and determine corrective action. • Leverage vendors/subcontractors across multiple procurements to create cost savings to project(s).• Research and evaluate suppliers based on price, quality, selection, service, support, availability, reliability, production and distribution capabilities and the supplier’s reputation and history. • Participate in the supplier bid evaluation, bid analyst, development of terms and conditions and recommendations for commercial contracts. • Monitor shipments to ensure goods come in on time and resolve problems related to undelivered goods. • Prepare/issue Request for Proposals (RFP’s) and evaluate vendor/subcontractor proposals to identify vendors/subcontractors who meet project constraints of budget and schedule at the estimating, execution and site purchasing levels.Qualifications• Proficient in Microsoft Office (Power Point, Word, Excel) and have a general knowledge of database utilization; SAP Experience a plus • Bachelor’s degree in construction management, business, engineering, supply chain management, or equivalent degree or military experience• At least five years’ experience in an engineering and/or construction related role• Thorough understanding and at least five years’ experience in contract administration and RFP’s • Detail-oriented, highly motivated with ability to effectively manage time • Excellent interpersonal, written and verbal communication skills• Team player with the ability to work independently to meet deadlines, goals and objectives• Must be bilingual in French and EnglishPlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      Responsibilities: The role resides in the Integrity Data Assessment team in Integrity which focuses on risk modelling and assessment, data governance, and software administration for all types of assets in Integrity.This contract position will be dedicated to a multi-year integration project to integrate Legacy Union TIMP pipelines into the Pipeline Risk and Integrity Management (PRIM) software; the team is looking for a highly motivated and technically sound Engineering Analyst to perform the following duties:• Conduct detailed checks of converted pipeline dataset to ensure they meet reporting standards and accurately reflect the pipeline specifications• Review Engineering drawings, bill of materials, other company records to validate pipeline specifications• Review and assess pipeline Non-Destructive Testing (NDT) records and digitize pertinent information using the PRIM software package.• Create and manipulate GIS dataset using satellite imagery and basic tools in ESRI ArcMap software package• Obtain a technical understanding of Integrity documents and processes to drive improvements to the data supporting Integrity and Risk assessments.MUST HAVE qualifications:• Technology diploma, Engineering degree, or experience with Enbridge records• Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsNICE TO HAVE qualifications:• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Knowledge of Enbridge Gas Inc. policy and procedures• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesPlease send your resume in confidence to paul.dusome@randstad.caAdvantages• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesResponsibilitiesResponsibilities:The role resides in the Integrity Data Assessment team in Integrity which focuses on risk modelling and assessment, data governance, and software administration for all types of assets in Integrity.This contract position will be dedicated to a multi-year integration project to integrate Legacy Union TIMP pipelines into the Pipeline Risk and Integrity Management (PRIM) software; the team is looking for a highly motivated and technically sound Engineering Analyst to perform the following duties:• Conduct detailed checks of converted pipeline dataset to ensure they meet reporting standards and accurately reflect the pipeline specifications• Review Engineering drawings, bill of materials, other company records to validate pipeline specifications• Review and assess pipeline Non-Destructive Testing (NDT) records and digitize pertinent information using the PRIM software package.• Create and manipulate GIS dataset using satellite imagery and basic tools in ESRI ArcMap software package• Obtain a technical understanding of Integrity documents and processes to drive improvements to the data supporting Integrity and Risk assessments.MUST HAVE qualifications:• Technology diploma, Engineering degree, or experience with Enbridge records• Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsNICE TO HAVE qualifications:• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Knowledge of Enbridge Gas Inc. policy and procedures• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesPlease send your resume in confidence to paul.dusome@randstad.caQualifications• Technology diploma, Engineering degree, • Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsSummaryResponsibilities:The role resides in the Integrity Data Assessment team in Integrity which focuses on risk modelling and assessment, data governance, and software administration for all types of assets in Integrity.This contract position will be dedicated to a multi-year integration project to integrate Legacy Union TIMP pipelines into the Pipeline Risk and Integrity Management (PRIM) software; the team is looking for a highly motivated and technically sound Engineering Analyst to perform the following duties:• Conduct detailed checks of converted pipeline dataset to ensure they meet reporting standards and accurately reflect the pipeline specifications• Review Engineering drawings, bill of materials, other company records to validate pipeline specifications• Review and assess pipeline Non-Destructive Testing (NDT) records and digitize pertinent information using the PRIM software package.• Create and manipulate GIS dataset using satellite imagery and basic tools in ESRI ArcMap software package• Obtain a technical understanding of Integrity documents and processes to drive improvements to the data supporting Integrity and Risk assessments.MUST HAVE qualifications:• Technology diploma, Engineering degree, or experience with Enbridge records• Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsNICE TO HAVE qualifications:• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Knowledge of Enbridge Gas Inc. policy and procedures• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesPlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Responsibilities: The role resides in the Integrity Data Assessment team in Integrity which focuses on risk modelling and assessment, data governance, and software administration for all types of assets in Integrity.This contract position will be dedicated to a multi-year integration project to integrate Legacy Union TIMP pipelines into the Pipeline Risk and Integrity Management (PRIM) software; the team is looking for a highly motivated and technically sound Engineering Analyst to perform the following duties:• Conduct detailed checks of converted pipeline dataset to ensure they meet reporting standards and accurately reflect the pipeline specifications• Review Engineering drawings, bill of materials, other company records to validate pipeline specifications• Review and assess pipeline Non-Destructive Testing (NDT) records and digitize pertinent information using the PRIM software package.• Create and manipulate GIS dataset using satellite imagery and basic tools in ESRI ArcMap software package• Obtain a technical understanding of Integrity documents and processes to drive improvements to the data supporting Integrity and Risk assessments.MUST HAVE qualifications:• Technology diploma, Engineering degree, or experience with Enbridge records• Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsNICE TO HAVE qualifications:• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Knowledge of Enbridge Gas Inc. policy and procedures• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesPlease send your resume in confidence to paul.dusome@randstad.caAdvantages• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesResponsibilitiesResponsibilities:The role resides in the Integrity Data Assessment team in Integrity which focuses on risk modelling and assessment, data governance, and software administration for all types of assets in Integrity.This contract position will be dedicated to a multi-year integration project to integrate Legacy Union TIMP pipelines into the Pipeline Risk and Integrity Management (PRIM) software; the team is looking for a highly motivated and technically sound Engineering Analyst to perform the following duties:• Conduct detailed checks of converted pipeline dataset to ensure they meet reporting standards and accurately reflect the pipeline specifications• Review Engineering drawings, bill of materials, other company records to validate pipeline specifications• Review and assess pipeline Non-Destructive Testing (NDT) records and digitize pertinent information using the PRIM software package.• Create and manipulate GIS dataset using satellite imagery and basic tools in ESRI ArcMap software package• Obtain a technical understanding of Integrity documents and processes to drive improvements to the data supporting Integrity and Risk assessments.MUST HAVE qualifications:• Technology diploma, Engineering degree, or experience with Enbridge records• Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsNICE TO HAVE qualifications:• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Knowledge of Enbridge Gas Inc. policy and procedures• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesPlease send your resume in confidence to paul.dusome@randstad.caQualifications• Technology diploma, Engineering degree, • Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsSummaryResponsibilities:The role resides in the Integrity Data Assessment team in Integrity which focuses on risk modelling and assessment, data governance, and software administration for all types of assets in Integrity.This contract position will be dedicated to a multi-year integration project to integrate Legacy Union TIMP pipelines into the Pipeline Risk and Integrity Management (PRIM) software; the team is looking for a highly motivated and technically sound Engineering Analyst to perform the following duties:• Conduct detailed checks of converted pipeline dataset to ensure they meet reporting standards and accurately reflect the pipeline specifications• Review Engineering drawings, bill of materials, other company records to validate pipeline specifications• Review and assess pipeline Non-Destructive Testing (NDT) records and digitize pertinent information using the PRIM software package.• Create and manipulate GIS dataset using satellite imagery and basic tools in ESRI ArcMap software package• Obtain a technical understanding of Integrity documents and processes to drive improvements to the data supporting Integrity and Risk assessments.MUST HAVE qualifications:• Technology diploma, Engineering degree, or experience with Enbridge records• Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsNICE TO HAVE qualifications:• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Knowledge of Enbridge Gas Inc. policy and procedures• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesPlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      Duties & Responsibilities:• Work closely with engineers to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines.• Demonstrate strong work ethic in all areasMUST HAVE qualifications:• 7+ years of technical communications experience in an engineering, IT, or technical environment.• Solid understanding of single-sourcing principles and structured and topic-based authoring.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.• Familiarity with version control systems or component content management systems (Ixiasoft DITA CMS preferred).• Experience with Adobe Technical Communication Suite, including Photoshop, Illustrator, and InDesign.• Familiarity with SharePoint, XML, HTML, CSS is strongly desired.• Ability to work collaboratively in a sharing, supporting team environment.• University degree in any area of study and Technical Communications certificateNICE TO HAVE qualifications:• Expert editorial, grammar, and structured authoring knowledge.• Experience producing content across multiple channels.Please send your resume in confidence to paul.dusome@randstad.caAdvantages• Expert editorial, grammar, and structured authoring knowledge.• Experience producing content across multiple channels.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.ResponsibilitiesDuties & Responsibilities:• Work closely with engineers to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines.• Demonstrate strong work ethic in all areasMUST HAVE qualifications:• 7+ years of technical communications experience in an engineering, IT, or technical environment.• Solid understanding of single-sourcing principles and structured and topic-based authoring.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.• Familiarity with version control systems or component content management systems (Ixiasoft DITA CMS preferred).• Experience with Adobe Technical Communication Suite, including Photoshop, Illustrator, and InDesign.• Familiarity with SharePoint, XML, HTML, CSS is strongly desired.• Ability to work collaboratively in a sharing, supporting team environment.• University degree in any area of study and Technical Communications certificateNICE TO HAVE qualifications:• Expert editorial, grammar, and structured authoring knowledge.• Experience producing content across multiple channels.Please send your resume in confidence to paul.dusome@randstad.caQualifications• 7+ years of technical communications experience in an engineering, IT, or technical environment.• Solid understanding of single-sourcing principles and structured and topic-based authoring.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.SummaryDuties & Responsibilities:• Work closely with engineers to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines.• Demonstrate strong work ethic in all areasMUST HAVE qualifications:• 7+ years of technical communications experience in an engineering, IT, or technical environment.• Solid understanding of single-sourcing principles and structured and topic-based authoring.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.• Familiarity with version control systems or component content management systems (Ixiasoft DITA CMS preferred).• Experience with Adobe Technical Communication Suite, including Photoshop, Illustrator, and InDesign.• Familiarity with SharePoint, XML, HTML, CSS is strongly desired.• Ability to work collaboratively in a sharing, supporting team environment.• University degree in any area of study and Technical Communications certificateNICE TO HAVE qualifications:• Expert editorial, grammar, and structured authoring knowledge.• Experience producing content across multiple channels.Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Duties & Responsibilities:• Work closely with engineers to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines.• Demonstrate strong work ethic in all areasMUST HAVE qualifications:• 7+ years of technical communications experience in an engineering, IT, or technical environment.• Solid understanding of single-sourcing principles and structured and topic-based authoring.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.• Familiarity with version control systems or component content management systems (Ixiasoft DITA CMS preferred).• Experience with Adobe Technical Communication Suite, including Photoshop, Illustrator, and InDesign.• Familiarity with SharePoint, XML, HTML, CSS is strongly desired.• Ability to work collaboratively in a sharing, supporting team environment.• University degree in any area of study and Technical Communications certificateNICE TO HAVE qualifications:• Expert editorial, grammar, and structured authoring knowledge.• Experience producing content across multiple channels.Please send your resume in confidence to paul.dusome@randstad.caAdvantages• Expert editorial, grammar, and structured authoring knowledge.• Experience producing content across multiple channels.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.ResponsibilitiesDuties & Responsibilities:• Work closely with engineers to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines.• Demonstrate strong work ethic in all areasMUST HAVE qualifications:• 7+ years of technical communications experience in an engineering, IT, or technical environment.• Solid understanding of single-sourcing principles and structured and topic-based authoring.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.• Familiarity with version control systems or component content management systems (Ixiasoft DITA CMS preferred).• Experience with Adobe Technical Communication Suite, including Photoshop, Illustrator, and InDesign.• Familiarity with SharePoint, XML, HTML, CSS is strongly desired.• Ability to work collaboratively in a sharing, supporting team environment.• University degree in any area of study and Technical Communications certificateNICE TO HAVE qualifications:• Expert editorial, grammar, and structured authoring knowledge.• Experience producing content across multiple channels.Please send your resume in confidence to paul.dusome@randstad.caQualifications• 7+ years of technical communications experience in an engineering, IT, or technical environment.• Solid understanding of single-sourcing principles and structured and topic-based authoring.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.SummaryDuties & Responsibilities:• Work closely with engineers to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines.• Demonstrate strong work ethic in all areasMUST HAVE qualifications:• 7+ years of technical communications experience in an engineering, IT, or technical environment.• Solid understanding of single-sourcing principles and structured and topic-based authoring.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.• Familiarity with version control systems or component content management systems (Ixiasoft DITA CMS preferred).• Experience with Adobe Technical Communication Suite, including Photoshop, Illustrator, and InDesign.• Familiarity with SharePoint, XML, HTML, CSS is strongly desired.• Ability to work collaboratively in a sharing, supporting team environment.• University degree in any area of study and Technical Communications certificateNICE TO HAVE qualifications:• Expert editorial, grammar, and structured authoring knowledge.• Experience producing content across multiple channels.Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      • Create, manage, and maintain integrity assessment programs and plans to ensure Enbridge Gas’ storage wells remain safe, environmentally responsible, reliable, and in compliance with the requirements of applicable standards and regulations.• Provides technical support on integrity matters, including consultation on designs and procedures.• Development of engineering standards and procedures related to underground storage assets.• Provides analysis and recommendations for asset management related to storage assets.• Completes engineering evaluations of storage assets and provides recommendations for enhancement through maintenance and expansion projects.• Maintenance of asset records for underground storage wells.Education:A degree in Mechanical or Chemical Engineering Registered as an EIT Please send your resume in confidence to paul.dusome@randstad.caAdvantagesCurrent or previous experience in gas distribution or oil & gas Registered as an EIT Responsibilities• Create, manage, and maintain integrity assessment programs and plans to ensure Enbridge Gas’ storage wells remain safe, environmentally responsible, reliable, and in compliance with the requirements of applicable standards and regulations.• Provides technical support on integrity matters, including consultation on designs and procedures.• Development of engineering standards and procedures related to underground storage assets.• Provides analysis and recommendations for asset management related to storage assets.• Completes engineering evaluations of storage assets and provides recommendations for enhancement through maintenance and expansion projects.• Maintenance of asset records for underground storage wells.Education:A degree in Mechanical or Chemical Engineering Registered as an EIT Please send your resume in confidence to paul.dusome@randstad.caQualificationsEducation:A degree in Mechanical or Chemical Engineering Registered as an EIT Summary• Create, manage, and maintain integrity assessment programs and plans to ensure Enbridge Gas’ storage wells remain safe, environmentally responsible, reliable, and in compliance with the requirements of applicable standards and regulations.• Provides technical support on integrity matters, including consultation on designs and procedures.• Development of engineering standards and procedures related to underground storage assets.• Provides analysis and recommendations for asset management related to storage assets.• Completes engineering evaluations of storage assets and provides recommendations for enhancement through maintenance and expansion projects.• Maintenance of asset records for underground storage wells.Education:A degree in Mechanical or Chemical Engineering Registered as an EIT Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Create, manage, and maintain integrity assessment programs and plans to ensure Enbridge Gas’ storage wells remain safe, environmentally responsible, reliable, and in compliance with the requirements of applicable standards and regulations.• Provides technical support on integrity matters, including consultation on designs and procedures.• Development of engineering standards and procedures related to underground storage assets.• Provides analysis and recommendations for asset management related to storage assets.• Completes engineering evaluations of storage assets and provides recommendations for enhancement through maintenance and expansion projects.• Maintenance of asset records for underground storage wells.Education:A degree in Mechanical or Chemical Engineering Registered as an EIT Please send your resume in confidence to paul.dusome@randstad.caAdvantagesCurrent or previous experience in gas distribution or oil & gas Registered as an EIT Responsibilities• Create, manage, and maintain integrity assessment programs and plans to ensure Enbridge Gas’ storage wells remain safe, environmentally responsible, reliable, and in compliance with the requirements of applicable standards and regulations.• Provides technical support on integrity matters, including consultation on designs and procedures.• Development of engineering standards and procedures related to underground storage assets.• Provides analysis and recommendations for asset management related to storage assets.• Completes engineering evaluations of storage assets and provides recommendations for enhancement through maintenance and expansion projects.• Maintenance of asset records for underground storage wells.Education:A degree in Mechanical or Chemical Engineering Registered as an EIT Please send your resume in confidence to paul.dusome@randstad.caQualificationsEducation:A degree in Mechanical or Chemical Engineering Registered as an EIT Summary• Create, manage, and maintain integrity assessment programs and plans to ensure Enbridge Gas’ storage wells remain safe, environmentally responsible, reliable, and in compliance with the requirements of applicable standards and regulations.• Provides technical support on integrity matters, including consultation on designs and procedures.• Development of engineering standards and procedures related to underground storage assets.• Provides analysis and recommendations for asset management related to storage assets.• Completes engineering evaluations of storage assets and provides recommendations for enhancement through maintenance and expansion projects.• Maintenance of asset records for underground storage wells.Education:A degree in Mechanical or Chemical Engineering Registered as an EIT Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      Are you a Technical Safety Specialist with experience in Rail Signaling?Are you looking to join a company that's a leader in it's field?If so, this could be the opportunity for you!We are looking for a highly motivated, self-starter Technical Safety Specialist to join the Safety Engineering department in our client's Urban Rail Signaling business line.AdvantagesThe Technical Safety Specialist provides technical safety leadership to the safety team, is responsible for enforcing the safety strategy, developing and continuously improving safety methodologies, execution of Safety Engineering activities in accordance with the company’s process, applicable industry standards, best practices and sharing expert knowledge.ResponsibilitiesEnsure that the Safety Engineering activities are executed in accordance with the company’s process, applicable industry standards and best practices Perform hazard identification studies (HAZID, HAZOP), hazard analyses (PHA, SHA, OSHA, FTA), safety analyses (FFMEA, FMECA, FSA) and hazard management Define safety requirements; analyze and evaluate design compliance with safety requirements and safety principles Review the adequacy and completeness of the safety evidences and produce the corresponding Safety Case artifacts Provide technical safety leadership to the project Safety Engineering team; work as part of an integrated project team, promoting the company's safety policy, best practices and train other staff Report directly to the Manager, RAMS Engineering and liaise with the Chief Safety ArchitectQualificationsB.Sc. in Electronics, Computer Science, Electrical Engineering or equivalentMinimum 2-3 years of experience in train control systems or automationKnowledge of railway signaling systems, train control systems, fixed and moving block signaling principles, relay-based and/or computer-based interlocking designGood understanding of systems engineering, software engineering and functional safetyDetailed knowledge of system safety lifecycle, system requirements definition, safety design concepts (system and software), safety and risk analysisGood technical writing skills, excellent communication and analytical skills; excellent command of the English language, both written and oralPreferred Qualifications:: M.Sc. in Electronics, Computer Science, Electrical Engineering or equivalentExtensive experience with safety standards (CENELEC, IEC, IEEE, MIL), best practices, safety methods and techniques (HAZID, HAZOP, PHA, SHA, OSHA, FTA, FMEA/FMECA, FSA) and hazard managementWorking knowledge of Communications-Based Train Control (CBTC) and/or Solid-State Interlocking (SSI)Member of Professional Engineer of Ontario (PEO) or Institution of Railway Signal Engineers (IRSE)Education:B.Sc. in Electronics, Computer Science, Electrical Engineering or equivalentSummaryIf this is the position for you, APPLY ONLINE or email resume to Mina Khalil at mina.khalil@randstad.caOnly qualified candidates will be contacted.Please visit www.randstad.ca for a complete list of opportunitiesRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you a Technical Safety Specialist with experience in Rail Signaling?Are you looking to join a company that's a leader in it's field?If so, this could be the opportunity for you!We are looking for a highly motivated, self-starter Technical Safety Specialist to join the Safety Engineering department in our client's Urban Rail Signaling business line.AdvantagesThe Technical Safety Specialist provides technical safety leadership to the safety team, is responsible for enforcing the safety strategy, developing and continuously improving safety methodologies, execution of Safety Engineering activities in accordance with the company’s process, applicable industry standards, best practices and sharing expert knowledge.ResponsibilitiesEnsure that the Safety Engineering activities are executed in accordance with the company’s process, applicable industry standards and best practices Perform hazard identification studies (HAZID, HAZOP), hazard analyses (PHA, SHA, OSHA, FTA), safety analyses (FFMEA, FMECA, FSA) and hazard management Define safety requirements; analyze and evaluate design compliance with safety requirements and safety principles Review the adequacy and completeness of the safety evidences and produce the corresponding Safety Case artifacts Provide technical safety leadership to the project Safety Engineering team; work as part of an integrated project team, promoting the company's safety policy, best practices and train other staff Report directly to the Manager, RAMS Engineering and liaise with the Chief Safety ArchitectQualificationsB.Sc. in Electronics, Computer Science, Electrical Engineering or equivalentMinimum 2-3 years of experience in train control systems or automationKnowledge of railway signaling systems, train control systems, fixed and moving block signaling principles, relay-based and/or computer-based interlocking designGood understanding of systems engineering, software engineering and functional safetyDetailed knowledge of system safety lifecycle, system requirements definition, safety design concepts (system and software), safety and risk analysisGood technical writing skills, excellent communication and analytical skills; excellent command of the English language, both written and oralPreferred Qualifications:: M.Sc. in Electronics, Computer Science, Electrical Engineering or equivalentExtensive experience with safety standards (CENELEC, IEC, IEEE, MIL), best practices, safety methods and techniques (HAZID, HAZOP, PHA, SHA, OSHA, FTA, FMEA/FMECA, FSA) and hazard managementWorking knowledge of Communications-Based Train Control (CBTC) and/or Solid-State Interlocking (SSI)Member of Professional Engineer of Ontario (PEO) or Institution of Railway Signal Engineers (IRSE)Education:B.Sc. in Electronics, Computer Science, Electrical Engineering or equivalentSummaryIf this is the position for you, APPLY ONLINE or email resume to Mina Khalil at mina.khalil@randstad.caOnly qualified candidates will be contacted.Please visit www.randstad.ca for a complete list of opportunitiesRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Morriston, Ontario
      • Contract
      Looking for New Grads with a background in Chemistry!!Are you a new grad from a post secondary program in Chemistry (or related field)? Are you open to contract opportunities to gain experience? If so, this position could be for you! Our client in the Guelph area has partnered with Randstad Engineering in their search for contract Lab Support. AdvantagesThis is a short term contract opportunity, but with potential for extension!ResponsibilitiesIn this contract position, you would be working closely with the Quality and Food Safety team, providing lab support and completing various tasks. Qualifications•Post secondary education within Chemistry (or related field)•Hard working •Able to complete tasks with minimal supervision •Flexible to work a short term contract positionSummaryIf you are interested in this opportunity, apply today! We are excited to discuss this opportunity further with you! Please send your resume to Swapna Nair at swapna.nair@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Looking for New Grads with a background in Chemistry!!Are you a new grad from a post secondary program in Chemistry (or related field)? Are you open to contract opportunities to gain experience? If so, this position could be for you! Our client in the Guelph area has partnered with Randstad Engineering in their search for contract Lab Support. AdvantagesThis is a short term contract opportunity, but with potential for extension!ResponsibilitiesIn this contract position, you would be working closely with the Quality and Food Safety team, providing lab support and completing various tasks. Qualifications•Post secondary education within Chemistry (or related field)•Hard working •Able to complete tasks with minimal supervision •Flexible to work a short term contract positionSummaryIf you are interested in this opportunity, apply today! We are excited to discuss this opportunity further with you! Please send your resume to Swapna Nair at swapna.nair@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Ottawa, Ontario
      • Contract
      Under the supervision of the Manager of Technical Projects & Support; the Mechanical Engineer provides engineeringknowledge to support manufacturing of the existing as well as new products in development.The various manufacturing processes include automated machines incorporating robotics and complex material handling.The engineer will source or design new equipment, systems and components, as well as make updates or improvementsto current equipment. The engineer will prepare documentation packages related to manufacturing equipment such asoperating and maintenance procedures as well as contribute to verification and validation studies, protocols andreports. The engineer will be engaged in supporting and troubleshooting the manufacturing equipment to minimizeproduction interruption and ensure production and quality targets are met. An ideal candidate would be a professional who possesses a breadth of knowledge to be able to work and contribute to different aspects of manufacturing.Advantages6 months contract with potential to be hired perm or further extensionGlobal Brandlots of room for advancementResponsibilitiesDuties and Responsibilities• mechanical engineering support of existing tools and equipment• mechanical design of improvements or new stations and equipment• understand and improve manufacturing processes• develop upgrades to existing automation and roboticQualifications• Bachelors degree or higher in engineering (mechanical preferred)• Experience in working with automation or manufacturing equipment• Preferred knowledge of PLC programming and communications• Ability to perform tolerance and/or measurement analysis• Ability to troubleshoot mechanical as well as electromechanical issues• Excellent oral and written English communication skills• 3-5 years of engineering within manufacturing experience preferredSummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.ca Thank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Under the supervision of the Manager of Technical Projects & Support; the Mechanical Engineer provides engineeringknowledge to support manufacturing of the existing as well as new products in development.The various manufacturing processes include automated machines incorporating robotics and complex material handling.The engineer will source or design new equipment, systems and components, as well as make updates or improvementsto current equipment. The engineer will prepare documentation packages related to manufacturing equipment such asoperating and maintenance procedures as well as contribute to verification and validation studies, protocols andreports. The engineer will be engaged in supporting and troubleshooting the manufacturing equipment to minimizeproduction interruption and ensure production and quality targets are met. An ideal candidate would be a professional who possesses a breadth of knowledge to be able to work and contribute to different aspects of manufacturing.Advantages6 months contract with potential to be hired perm or further extensionGlobal Brandlots of room for advancementResponsibilitiesDuties and Responsibilities• mechanical engineering support of existing tools and equipment• mechanical design of improvements or new stations and equipment• understand and improve manufacturing processes• develop upgrades to existing automation and roboticQualifications• Bachelors degree or higher in engineering (mechanical preferred)• Experience in working with automation or manufacturing equipment• Preferred knowledge of PLC programming and communications• Ability to perform tolerance and/or measurement analysis• Ability to troubleshoot mechanical as well as electromechanical issues• Excellent oral and written English communication skills• 3-5 years of engineering within manufacturing experience preferredSummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.ca Thank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      Engineer-Materials Engineering.RESPONSIBILITIES• Develop and update company specifications and practices related to steel pipe and components, welding, and non-destructive examination to ensure compliance with current industry standards and regulations• Develop and maintain company welding procedures to ensure compliance with CSA Z662, ASME IX, and best practices.• Review and approve third-party welding procedures for compliance with CSA Z662 and ASME IX.• Support field welding operations through welding procedure selection, troubleshooting, and in-service welding assessments including weld modeling.• Support procurement processes by reviewing material test reports and technical exception requests from vendors to ensure compliance with codes, standards and best practices.• Provide materials and welding engineering and non-destructive examination support to pipeline and equipment integrity programs, capital and projects of all sizes, and company initiatives in business development and operational excellence.• Support the assessment of new materials and products of interest to the company.• Coordinate failure analysis testing when neededQUALIFICATIONS• Accredited University degree in Metallurgical or Materials Engineering, or equivalent• Working knowledge of metallic materials, welding engineering, NDE, and quality assurance• 4 or more years materials and welding engineering experience in the oil and gas industry• Must possess or be eligible to obtain P.Eng. designation in Ontario• Demonstrated strong technical, problem solving, and decision-making skills• Demonstrated strong communication skills (verbal and written)• Demonstrated strong interpersonal and teamwork skills. An ability to build and maintain a good working relationship with the client groups is critical to this role• Proficiency in MS Word, Excel, PowerPoint• Must be able to obtain a valid passport.• Valid Ontario Class G driver’s licenseDesired Qualifications:• Experience conducting root cause analysis, forensic metallurgical failure analysis, and material testing• Experience providing materials and welding support to major capital projects• Experience providing operations support in oil and gas production, pipelines, or refining• Familiar with the fundamentals of Quality Assurance from both a procurement and construction standpoint• Experience with applicable codes, standards, and regulatory requirements (i.e. CSA, ASME, API, MSS, Ont Reg 210/01, etc.)Please send your resume in confidence to paul.dusome@randstad.caAdvantages• Experience conducting root cause analysis, forensic metallurgical failure analysis, and material testing• Experience providing materials and welding support to major capital projects• Experience providing operations support in oil and gas production, pipelines, or refining• Familiar with the fundamentals of Quality Assurance from both a procurement and construction standpoint• Experience with applicable codes, standards, and regulatory requirements (i.e. CSA, ASME, API, MSS, Ont Reg 210/01, etc.)ResponsibilitiesEngineer-Materials Engineering.RESPONSIBILITIES• Develop and update company specifications and practices related to steel pipe and components, welding, and non-destructive examination to ensure compliance with current industry standards and regulations• Develop and maintain company welding procedures to ensure compliance with CSA Z662, ASME IX, and best practices.• Review and approve third-party welding procedures for compliance with CSA Z662 and ASME IX.• Support field welding operations through welding procedure selection, troubleshooting, and in-service welding assessments including weld modeling.• Support procurement processes by reviewing material test reports and technical exception requests from vendors to ensure compliance with codes, standards and best practices.• Provide materials and welding engineering and non-destructive examination support to pipeline and equipment integrity programs, capital and projects of all sizes, and company initiatives in business development and operational excellence.• Support the assessment of new materials and products of interest to the company.• Coordinate failure analysis testing when neededQUALIFICATIONS• Accredited University degree in Metallurgical or Materials Engineering, or equivalent• Working knowledge of metallic materials, welding engineering, NDE, and quality assurance• 4 or more years materials and welding engineering experience in the oil and gas industry• Must possess or be eligible to obtain P.Eng. designation in Ontario• Demonstrated strong technical, problem solving, and decision-making skills• Demonstrated strong communication skills (verbal and written)• Demonstrated strong interpersonal and teamwork skills. An ability to build and maintain a good working relationship with the client groups is critical to this role• Proficiency in MS Word, Excel, PowerPoint• Must be able to obtain a valid passport.• Valid Ontario Class G driver’s licenseDesired Qualifications:• Experience conducting root cause analysis, forensic metallurgical failure analysis, and material testing• Experience providing materials and welding support to major capital projects• Experience providing operations support in oil and gas production, pipelines, or refining• Familiar with the fundamentals of Quality Assurance from both a procurement and construction standpoint• Experience with applicable codes, standards, and regulatory requirements (i.e. CSA, ASME, API, MSS, Ont Reg 210/01, etc.)Please send your resume in confidence to paul.dusome@randstad.caQualifications• Accredited University degree in Metallurgical or Materials Engineering, or equivalent• Working knowledge of metallic materials, welding engineering, NDE, and quality assurance• 4 or more years materials and welding engineering experience in the oil and gas industry• Must possess or be eligible to obtain P.Eng. designation in Ontario• Demonstrated strong technical, problem solving, and decision-making skills• Demonstrated strong communication skills (verbal and written)• Demonstrated strong interpersonal and teamwork skills. An ability to build and maintain a good working relationship with the client groups is critical to this role• Proficiency in MS Word, Excel, PowerPoint• Must be able to obtain a valid passport.• Valid Ontario Class G driver’s licenseSummaryEngineer-Materials Engineering.RESPONSIBILITIES• Develop and update company specifications and practices related to steel pipe and components, welding, and non-destructive examination to ensure compliance with current industry standards and regulations• Develop and maintain company welding procedures to ensure compliance with CSA Z662, ASME IX, and best practices.• Review and approve third-party welding procedures for compliance with CSA Z662 and ASME IX.• Support field welding operations through welding procedure selection, troubleshooting, and in-service welding assessments including weld modeling.• Support procurement processes by reviewing material test reports and technical exception requests from vendors to ensure compliance with codes, standards and best practices.• Provide materials and welding engineering and non-destructive examination support to pipeline and equipment integrity programs, capital and projects of all sizes, and company initiatives in business development and operational excellence.• Support the assessment of new materials and products of interest to the company.• Coordinate failure analysis testing when neededQUALIFICATIONS• Accredited University degree in Metallurgical or Materials Engineering, or equivalent• Working knowledge of metallic materials, welding engineering, NDE, and quality assurance• 4 or more years materials and welding engineering experience in the oil and gas industry• Must possess or be eligible to obtain P.Eng. designation in Ontario• Demonstrated strong technical, problem solving, and decision-making skills• Demonstrated strong communication skills (verbal and written)• Demonstrated strong interpersonal and teamwork skills. An ability to build and maintain a good working relationship with the client groups is critical to this role• Proficiency in MS Word, Excel, PowerPoint• Must be able to obtain a valid passport.• Valid Ontario Class G driver’s licenseDesired Qualifications:• Experience conducting root cause analysis, forensic metallurgical failure analysis, and material testing• Experience providing materials and welding support to major capital projects• Experience providing operations support in oil and gas production, pipelines, or refining• Familiar with the fundamentals of Quality Assurance from both a procurement and construction standpoint• Experience with applicable codes, standards, and regulatory requirements (i.e. CSA, ASME, API, MSS, Ont Reg 210/01, etc.)Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Engineer-Materials Engineering.RESPONSIBILITIES• Develop and update company specifications and practices related to steel pipe and components, welding, and non-destructive examination to ensure compliance with current industry standards and regulations• Develop and maintain company welding procedures to ensure compliance with CSA Z662, ASME IX, and best practices.• Review and approve third-party welding procedures for compliance with CSA Z662 and ASME IX.• Support field welding operations through welding procedure selection, troubleshooting, and in-service welding assessments including weld modeling.• Support procurement processes by reviewing material test reports and technical exception requests from vendors to ensure compliance with codes, standards and best practices.• Provide materials and welding engineering and non-destructive examination support to pipeline and equipment integrity programs, capital and projects of all sizes, and company initiatives in business development and operational excellence.• Support the assessment of new materials and products of interest to the company.• Coordinate failure analysis testing when neededQUALIFICATIONS• Accredited University degree in Metallurgical or Materials Engineering, or equivalent• Working knowledge of metallic materials, welding engineering, NDE, and quality assurance• 4 or more years materials and welding engineering experience in the oil and gas industry• Must possess or be eligible to obtain P.Eng. designation in Ontario• Demonstrated strong technical, problem solving, and decision-making skills• Demonstrated strong communication skills (verbal and written)• Demonstrated strong interpersonal and teamwork skills. An ability to build and maintain a good working relationship with the client groups is critical to this role• Proficiency in MS Word, Excel, PowerPoint• Must be able to obtain a valid passport.• Valid Ontario Class G driver’s licenseDesired Qualifications:• Experience conducting root cause analysis, forensic metallurgical failure analysis, and material testing• Experience providing materials and welding support to major capital projects• Experience providing operations support in oil and gas production, pipelines, or refining• Familiar with the fundamentals of Quality Assurance from both a procurement and construction standpoint• Experience with applicable codes, standards, and regulatory requirements (i.e. CSA, ASME, API, MSS, Ont Reg 210/01, etc.)Please send your resume in confidence to paul.dusome@randstad.caAdvantages• Experience conducting root cause analysis, forensic metallurgical failure analysis, and material testing• Experience providing materials and welding support to major capital projects• Experience providing operations support in oil and gas production, pipelines, or refining• Familiar with the fundamentals of Quality Assurance from both a procurement and construction standpoint• Experience with applicable codes, standards, and regulatory requirements (i.e. CSA, ASME, API, MSS, Ont Reg 210/01, etc.)ResponsibilitiesEngineer-Materials Engineering.RESPONSIBILITIES• Develop and update company specifications and practices related to steel pipe and components, welding, and non-destructive examination to ensure compliance with current industry standards and regulations• Develop and maintain company welding procedures to ensure compliance with CSA Z662, ASME IX, and best practices.• Review and approve third-party welding procedures for compliance with CSA Z662 and ASME IX.• Support field welding operations through welding procedure selection, troubleshooting, and in-service welding assessments including weld modeling.• Support procurement processes by reviewing material test reports and technical exception requests from vendors to ensure compliance with codes, standards and best practices.• Provide materials and welding engineering and non-destructive examination support to pipeline and equipment integrity programs, capital and projects of all sizes, and company initiatives in business development and operational excellence.• Support the assessment of new materials and products of interest to the company.• Coordinate failure analysis testing when neededQUALIFICATIONS• Accredited University degree in Metallurgical or Materials Engineering, or equivalent• Working knowledge of metallic materials, welding engineering, NDE, and quality assurance• 4 or more years materials and welding engineering experience in the oil and gas industry• Must possess or be eligible to obtain P.Eng. designation in Ontario• Demonstrated strong technical, problem solving, and decision-making skills• Demonstrated strong communication skills (verbal and written)• Demonstrated strong interpersonal and teamwork skills. An ability to build and maintain a good working relationship with the client groups is critical to this role• Proficiency in MS Word, Excel, PowerPoint• Must be able to obtain a valid passport.• Valid Ontario Class G driver’s licenseDesired Qualifications:• Experience conducting root cause analysis, forensic metallurgical failure analysis, and material testing• Experience providing materials and welding support to major capital projects• Experience providing operations support in oil and gas production, pipelines, or refining• Familiar with the fundamentals of Quality Assurance from both a procurement and construction standpoint• Experience with applicable codes, standards, and regulatory requirements (i.e. CSA, ASME, API, MSS, Ont Reg 210/01, etc.)Please send your resume in confidence to paul.dusome@randstad.caQualifications• Accredited University degree in Metallurgical or Materials Engineering, or equivalent• Working knowledge of metallic materials, welding engineering, NDE, and quality assurance• 4 or more years materials and welding engineering experience in the oil and gas industry• Must possess or be eligible to obtain P.Eng. designation in Ontario• Demonstrated strong technical, problem solving, and decision-making skills• Demonstrated strong communication skills (verbal and written)• Demonstrated strong interpersonal and teamwork skills. An ability to build and maintain a good working relationship with the client groups is critical to this role• Proficiency in MS Word, Excel, PowerPoint• Must be able to obtain a valid passport.• Valid Ontario Class G driver’s licenseSummaryEngineer-Materials Engineering.RESPONSIBILITIES• Develop and update company specifications and practices related to steel pipe and components, welding, and non-destructive examination to ensure compliance with current industry standards and regulations• Develop and maintain company welding procedures to ensure compliance with CSA Z662, ASME IX, and best practices.• Review and approve third-party welding procedures for compliance with CSA Z662 and ASME IX.• Support field welding operations through welding procedure selection, troubleshooting, and in-service welding assessments including weld modeling.• Support procurement processes by reviewing material test reports and technical exception requests from vendors to ensure compliance with codes, standards and best practices.• Provide materials and welding engineering and non-destructive examination support to pipeline and equipment integrity programs, capital and projects of all sizes, and company initiatives in business development and operational excellence.• Support the assessment of new materials and products of interest to the company.• Coordinate failure analysis testing when neededQUALIFICATIONS• Accredited University degree in Metallurgical or Materials Engineering, or equivalent• Working knowledge of metallic materials, welding engineering, NDE, and quality assurance• 4 or more years materials and welding engineering experience in the oil and gas industry• Must possess or be eligible to obtain P.Eng. designation in Ontario• Demonstrated strong technical, problem solving, and decision-making skills• Demonstrated strong communication skills (verbal and written)• Demonstrated strong interpersonal and teamwork skills. An ability to build and maintain a good working relationship with the client groups is critical to this role• Proficiency in MS Word, Excel, PowerPoint• Must be able to obtain a valid passport.• Valid Ontario Class G driver’s licenseDesired Qualifications:• Experience conducting root cause analysis, forensic metallurgical failure analysis, and material testing• Experience providing materials and welding support to major capital projects• Experience providing operations support in oil and gas production, pipelines, or refining• Familiar with the fundamentals of Quality Assurance from both a procurement and construction standpoint• Experience with applicable codes, standards, and regulatory requirements (i.e. CSA, ASME, API, MSS, Ont Reg 210/01, etc.)Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      RESPONSIBILITIES• Support developing and updating company specifications and practices related to steel and Polyethylene pipes and components, welding and Heat and Electro Fusion joining to ensure compliance with current industry standards and regulations• Lead/support developing item master, approved material list and assessment of new materials and products of interest to the company.• Develop and maintain company welding and fusion procedures to ensure compliance with CSA Z662, ASME IX, ASTM F2620, ASTM F1290, CSA B137.4 and best practices.• Review and approve third-party welding and Polyethylene fusion procedures for compliance with CSA Z662, ASME IX, ASTM F2620, ASTM F1290 and CSA B137.4• Support field welding and Polyethylene Fusion operations through procedure selection and troubleshooting.QUALIFICATIONSBasic/Minimum Qualifications: • Accredited University degree in Metallurgical, Mechanical, Chemical or Materials Engineering, or equivalent• 3 or more years experience in oil and gas industry.• Must possess or be eligible to obtain P.Eng. designation in Ontario.• Demonstrated strong technical, problem solving, and decision-making skills.• Demonstrated strong communication skills (verbal and written).• Demonstrated strong interpersonal and teamwork skills. An ability to build and maintain a good working relationship with the client groups is critical to this role.• Proficiency in MS Word, Excel and PowerPoint and working knowledge of MS project, GIS and Maximo.• Ability to think analytically and perform detailed analysis.• Ability to coordinate multiple projects at one time and meet defined timelines.• Must be able to obtain a valid passport.  • Must be able to perform independently.• Valid Ontario Class G driver’s license.Desired Qualifications:• Experience conducting root cause analysis and project management.• Experience with applicable codes, standards, and regulatory requirements (i.e. CSA, ASME, ASTM, API, MSS, Ont Reg 210/01, etc.)Please send your resume in confidence to paul.dusome@randstad.caAdvantages• Experience conducting root cause analysis and project management. • Experience with applicable codes, standards, and regulatory requirements (i.e. CSA, ASME, ASTM, API, MSS, Ont Reg 210/01, etc.)ResponsibilitiesRESPONSIBILITIES• Support developing and updating company specifications and practices related to steel and Polyethylene pipes and components, welding and Heat and Electro Fusion joining to ensure compliance with current industry standards and regulations• Lead/support developing item master, approved material list and assessment of new materials and products of interest to the company.• Develop and maintain company welding and fusion procedures to ensure compliance with CSA Z662, ASME IX, ASTM F2620, ASTM F1290, CSA B137.4 and best practices.• Review and approve third-party welding and Polyethylene fusion procedures for compliance with CSA Z662, ASME IX, ASTM F2620, ASTM F1290 and CSA B137.4• Support field welding and Polyethylene Fusion operations through procedure selection and troubleshooting.QUALIFICATIONSBasic/Minimum Qualifications: • Accredited University degree in Metallurgical, Mechanical, Chemical or Materials Engineering, or equivalent• 3 or more years experience in oil and gas industry.• Must possess or be eligible to obtain P.Eng. designation in Ontario.• Demonstrated strong technical, problem solving, and decision-making skills.• Demonstrated strong communication skills (verbal and written).• Demonstrated strong interpersonal and teamwork skills. An ability to build and maintain a good working relationship with the client groups is critical to this role.• Proficiency in MS Word, Excel and PowerPoint and working knowledge of MS project, GIS and Maximo.• Ability to think analytically and perform detailed analysis.• Ability to coordinate multiple projects at one time and meet defined timelines.• Must be able to obtain a valid passport.  • Must be able to perform independently.• Valid Ontario Class G driver’s license.Desired Qualifications:• Experience conducting root cause analysis and project management.• Experience with applicable codes, standards, and regulatory requirements (i.e. CSA, ASME, ASTM, API, MSS, Ont Reg 210/01, etc.)Please send your resume in confidence to paul.dusome@randstad.caQualificationsAccredited University degree in Metallurgical, Mechanical, Chemical or Materials Engineering, or equivalent •3 or more years experience in oil and gas industry. SummaryRESPONSIBILITIES• Support developing and updating company specifications and practices related to steel and Polyethylene pipes and components, welding and Heat and Electro Fusion joining to ensure compliance with current industry standards and regulations• Lead/support developing item master, approved material list and assessment of new materials and products of interest to the company.• Develop and maintain company welding and fusion procedures to ensure compliance with CSA Z662, ASME IX, ASTM F2620, ASTM F1290, CSA B137.4 and best practices.• Review and approve third-party welding and Polyethylene fusion procedures for compliance with CSA Z662, ASME IX, ASTM F2620, ASTM F1290 and CSA B137.4• Support field welding and Polyethylene Fusion operations through procedure selection and troubleshooting.QUALIFICATIONSBasic/Minimum Qualifications: • Accredited University degree in Metallurgical, Mechanical, Chemical or Materials Engineering, or equivalent• 3 or more years experience in oil and gas industry.• Must possess or be eligible to obtain P.Eng. designation in Ontario.• Demonstrated strong technical, problem solving, and decision-making skills.• Demonstrated strong communication skills (verbal and written).• Demonstrated strong interpersonal and teamwork skills. An ability to build and maintain a good working relationship with the client groups is critical to this role.• Proficiency in MS Word, Excel and PowerPoint and working knowledge of MS project, GIS and Maximo.• Ability to think analytically and perform detailed analysis.• Ability to coordinate multiple projects at one time and meet defined timelines.• Must be able to obtain a valid passport.  • Must be able to perform independently.• Valid Ontario Class G driver’s license.Desired Qualifications:• Experience conducting root cause analysis and project management.• Experience with applicable codes, standards, and regulatory requirements (i.e. CSA, ASME, ASTM, API, MSS, Ont Reg 210/01, etc.)Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      RESPONSIBILITIES• Support developing and updating company specifications and practices related to steel and Polyethylene pipes and components, welding and Heat and Electro Fusion joining to ensure compliance with current industry standards and regulations• Lead/support developing item master, approved material list and assessment of new materials and products of interest to the company.• Develop and maintain company welding and fusion procedures to ensure compliance with CSA Z662, ASME IX, ASTM F2620, ASTM F1290, CSA B137.4 and best practices.• Review and approve third-party welding and Polyethylene fusion procedures for compliance with CSA Z662, ASME IX, ASTM F2620, ASTM F1290 and CSA B137.4• Support field welding and Polyethylene Fusion operations through procedure selection and troubleshooting.QUALIFICATIONSBasic/Minimum Qualifications: • Accredited University degree in Metallurgical, Mechanical, Chemical or Materials Engineering, or equivalent• 3 or more years experience in oil and gas industry.• Must possess or be eligible to obtain P.Eng. designation in Ontario.• Demonstrated strong technical, problem solving, and decision-making skills.• Demonstrated strong communication skills (verbal and written).• Demonstrated strong interpersonal and teamwork skills. An ability to build and maintain a good working relationship with the client groups is critical to this role.• Proficiency in MS Word, Excel and PowerPoint and working knowledge of MS project, GIS and Maximo.• Ability to think analytically and perform detailed analysis.• Ability to coordinate multiple projects at one time and meet defined timelines.• Must be able to obtain a valid passport.  • Must be able to perform independently.• Valid Ontario Class G driver’s license.Desired Qualifications:• Experience conducting root cause analysis and project management.• Experience with applicable codes, standards, and regulatory requirements (i.e. CSA, ASME, ASTM, API, MSS, Ont Reg 210/01, etc.)Please send your resume in confidence to paul.dusome@randstad.caAdvantages• Experience conducting root cause analysis and project management. • Experience with applicable codes, standards, and regulatory requirements (i.e. CSA, ASME, ASTM, API, MSS, Ont Reg 210/01, etc.)ResponsibilitiesRESPONSIBILITIES• Support developing and updating company specifications and practices related to steel and Polyethylene pipes and components, welding and Heat and Electro Fusion joining to ensure compliance with current industry standards and regulations• Lead/support developing item master, approved material list and assessment of new materials and products of interest to the company.• Develop and maintain company welding and fusion procedures to ensure compliance with CSA Z662, ASME IX, ASTM F2620, ASTM F1290, CSA B137.4 and best practices.• Review and approve third-party welding and Polyethylene fusion procedures for compliance with CSA Z662, ASME IX, ASTM F2620, ASTM F1290 and CSA B137.4• Support field welding and Polyethylene Fusion operations through procedure selection and troubleshooting.QUALIFICATIONSBasic/Minimum Qualifications: • Accredited University degree in Metallurgical, Mechanical, Chemical or Materials Engineering, or equivalent• 3 or more years experience in oil and gas industry.• Must possess or be eligible to obtain P.Eng. designation in Ontario.• Demonstrated strong technical, problem solving, and decision-making skills.• Demonstrated strong communication skills (verbal and written).• Demonstrated strong interpersonal and teamwork skills. An ability to build and maintain a good working relationship with the client groups is critical to this role.• Proficiency in MS Word, Excel and PowerPoint and working knowledge of MS project, GIS and Maximo.• Ability to think analytically and perform detailed analysis.• Ability to coordinate multiple projects at one time and meet defined timelines.• Must be able to obtain a valid passport.  • Must be able to perform independently.• Valid Ontario Class G driver’s license.Desired Qualifications:• Experience conducting root cause analysis and project management.• Experience with applicable codes, standards, and regulatory requirements (i.e. CSA, ASME, ASTM, API, MSS, Ont Reg 210/01, etc.)Please send your resume in confidence to paul.dusome@randstad.caQualificationsAccredited University degree in Metallurgical, Mechanical, Chemical or Materials Engineering, or equivalent •3 or more years experience in oil and gas industry. SummaryRESPONSIBILITIES• Support developing and updating company specifications and practices related to steel and Polyethylene pipes and components, welding and Heat and Electro Fusion joining to ensure compliance with current industry standards and regulations• Lead/support developing item master, approved material list and assessment of new materials and products of interest to the company.• Develop and maintain company welding and fusion procedures to ensure compliance with CSA Z662, ASME IX, ASTM F2620, ASTM F1290, CSA B137.4 and best practices.• Review and approve third-party welding and Polyethylene fusion procedures for compliance with CSA Z662, ASME IX, ASTM F2620, ASTM F1290 and CSA B137.4• Support field welding and Polyethylene Fusion operations through procedure selection and troubleshooting.QUALIFICATIONSBasic/Minimum Qualifications: • Accredited University degree in Metallurgical, Mechanical, Chemical or Materials Engineering, or equivalent• 3 or more years experience in oil and gas industry.• Must possess or be eligible to obtain P.Eng. designation in Ontario.• Demonstrated strong technical, problem solving, and decision-making skills.• Demonstrated strong communication skills (verbal and written).• Demonstrated strong interpersonal and teamwork skills. An ability to build and maintain a good working relationship with the client groups is critical to this role.• Proficiency in MS Word, Excel and PowerPoint and working knowledge of MS project, GIS and Maximo.• Ability to think analytically and perform detailed analysis.• Ability to coordinate multiple projects at one time and meet defined timelines.• Must be able to obtain a valid passport.  • Must be able to perform independently.• Valid Ontario Class G driver’s license.Desired Qualifications:• Experience conducting root cause analysis and project management.• Experience with applicable codes, standards, and regulatory requirements (i.e. CSA, ASME, ASTM, API, MSS, Ont Reg 210/01, etc.)Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      Develop various Request for Proposals (RFPs)/RFIs for the SAP ProgramFocus on business scope, scope including Hardware, Software, and services including procurement of SAP enterprise software for both cloud and on premise technology.Authoring documents known as Requests for Proposal or RFP/Request for Information (RFI) and others; these request documents will be sent out to vendors so that they can bid on the proposal.Educate the team on the RFP sections to support team members not familiar with developing RFP’sResearch the requirements for the bid (where required), writing the RFP document and draft SOW, hardware and/or software agreement to be included in the RFP.Review and assess scope of work/specifications and requirements (e.g., budget/project approval, estimate, schedule, technical details, etc.)Prepare competitive tender/proposals for goods and services, development of evaluation criteria for proposals, evaluations of commercial submissions and recommendations for contract awards.Prepare and issue contract documents for the procurement of goods and services, standard letters, purchase orders and procurement tender/proposal documents.Review the scope of work, specifications and requirements to ensure that prerequisites have been provided (e.g., estimate, schedule, technical details, business requirements etc.).Work with project teams and collaborate with legal to include appropriate terms and conditions adhering to guidelines.Assist with proposal evaluations and contract negotiation and administration activities.Facilitate and manage the end-to-end procurement process to issue the RFPRFP Writer – Mandatory SkillsUniversity Degree or College Diploma in Business or a related discipline, or a combination of education, training, and experience deemed to be equivalent combined with progressively responsible experience in a hybrid or complex procurement and/or supply organization.Must demonstrate experience (detailed in resume) relevant to the scopeFive (5) years of demonstrated relevant experienceProven experience in authoring RFPs for complex Enterprise procurement of software, hardware, and implementation services.Preference will be given to SAP RFP authoring experiencePlease send your resume in confidence to paul.dusome@randstad.caAdvantagesUniversity Degree or College Diploma in Business or a related discipline, or a combination of education, training, and experience deemed to be equivalent combined with progressively responsible experience in a hybrid or complex procurement and/or supply organization.ResponsibilitiesDevelop various Request for Proposals (RFPs)/RFIs for the SAP ProgramFocus on business scope, scope including Hardware, Software, and services including procurement of SAP enterprise software for both cloud and on premise technology.Authoring documents known as Requests for Proposal or RFP/Request for Information (RFI) and others; these request documents will be sent out to vendors so that they can bid on the proposal.Educate the team on the RFP sections to support team members not familiar with developing RFP’sResearch the requirements for the bid (where required), writing the RFP document and draft SOW, hardware and/or software agreement to be included in the RFP.Review and assess scope of work/specifications and requirements (e.g., budget/project approval, estimate, schedule, technical details, etc.)Prepare competitive tender/proposals for goods and services, development of evaluation criteria for proposals, evaluations of commercial submissions and recommendations for contract awards.Prepare and issue contract documents for the procurement of goods and services, standard letters, purchase orders and procurement tender/proposal documents.Review the scope of work, specifications and requirements to ensure that prerequisites have been provided (e.g., estimate, schedule, technical details, business requirements etc.).Work with project teams and collaborate with legal to include appropriate terms and conditions adhering to guidelines.Assist with proposal evaluations and contract negotiation and administration activities.Facilitate and manage the end-to-end procurement process to issue the RFPRFP Writer – Mandatory SkillsUniversity Degree or College Diploma in Business or a related discipline, or a combination of education, training, and experience deemed to be equivalent combined with progressively responsible experience in a hybrid or complex procurement and/or supply organization.Must demonstrate experience (detailed in resume) relevant to the scopeFive (5) years of demonstrated relevant experienceProven experience in authoring RFPs for complex Enterprise procurement of software, hardware, and implementation services.Preference will be given to SAP RFP authoring experiencePlease send your resume in confidence to paul.dusome@randstad.caQualificationsUniversity Degree or College Diploma in Business or a related discipline, or a combination of education, training, and experience deemed to be equivalent combined with progressively responsible experience in a hybrid or complex procurement and/or supply organization.SummaryDevelop various Request for Proposals (RFPs)/RFIs for the SAP ProgramFocus on business scope, scope including Hardware, Software, and services including procurement of SAP enterprise software for both cloud and on premise technology.Authoring documents known as Requests for Proposal or RFP/Request for Information (RFI) and others; these request documents will be sent out to vendors so that they can bid on the proposal.Educate the team on the RFP sections to support team members not familiar with developing RFP’sResearch the requirements for the bid (where required), writing the RFP document and draft SOW, hardware and/or software agreement to be included in the RFP.Review and assess scope of work/specifications and requirements (e.g., budget/project approval, estimate, schedule, technical details, etc.)Prepare competitive tender/proposals for goods and services, development of evaluation criteria for proposals, evaluations of commercial submissions and recommendations for contract awards.Prepare and issue contract documents for the procurement of goods and services, standard letters, purchase orders and procurement tender/proposal documents.Review the scope of work, specifications and requirements to ensure that prerequisites have been provided (e.g., estimate, schedule, technical details, business requirements etc.).Work with project teams and collaborate with legal to include appropriate terms and conditions adhering to guidelines.Assist with proposal evaluations and contract negotiation and administration activities.Facilitate and manage the end-to-end procurement process to issue the RFPRFP Writer – Mandatory SkillsUniversity Degree or College Diploma in Business or a related discipline, or a combination of education, training, and experience deemed to be equivalent combined with progressively responsible experience in a hybrid or complex procurement and/or supply organization.Must demonstrate experience (detailed in resume) relevant to the scopeFive (5) years of demonstrated relevant experienceProven experience in authoring RFPs for complex Enterprise procurement of software, hardware, and implementation services.Preference will be given to SAP RFP authoring experiencePlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Develop various Request for Proposals (RFPs)/RFIs for the SAP ProgramFocus on business scope, scope including Hardware, Software, and services including procurement of SAP enterprise software for both cloud and on premise technology.Authoring documents known as Requests for Proposal or RFP/Request for Information (RFI) and others; these request documents will be sent out to vendors so that they can bid on the proposal.Educate the team on the RFP sections to support team members not familiar with developing RFP’sResearch the requirements for the bid (where required), writing the RFP document and draft SOW, hardware and/or software agreement to be included in the RFP.Review and assess scope of work/specifications and requirements (e.g., budget/project approval, estimate, schedule, technical details, etc.)Prepare competitive tender/proposals for goods and services, development of evaluation criteria for proposals, evaluations of commercial submissions and recommendations for contract awards.Prepare and issue contract documents for the procurement of goods and services, standard letters, purchase orders and procurement tender/proposal documents.Review the scope of work, specifications and requirements to ensure that prerequisites have been provided (e.g., estimate, schedule, technical details, business requirements etc.).Work with project teams and collaborate with legal to include appropriate terms and conditions adhering to guidelines.Assist with proposal evaluations and contract negotiation and administration activities.Facilitate and manage the end-to-end procurement process to issue the RFPRFP Writer – Mandatory SkillsUniversity Degree or College Diploma in Business or a related discipline, or a combination of education, training, and experience deemed to be equivalent combined with progressively responsible experience in a hybrid or complex procurement and/or supply organization.Must demonstrate experience (detailed in resume) relevant to the scopeFive (5) years of demonstrated relevant experienceProven experience in authoring RFPs for complex Enterprise procurement of software, hardware, and implementation services.Preference will be given to SAP RFP authoring experiencePlease send your resume in confidence to paul.dusome@randstad.caAdvantagesUniversity Degree or College Diploma in Business or a related discipline, or a combination of education, training, and experience deemed to be equivalent combined with progressively responsible experience in a hybrid or complex procurement and/or supply organization.ResponsibilitiesDevelop various Request for Proposals (RFPs)/RFIs for the SAP ProgramFocus on business scope, scope including Hardware, Software, and services including procurement of SAP enterprise software for both cloud and on premise technology.Authoring documents known as Requests for Proposal or RFP/Request for Information (RFI) and others; these request documents will be sent out to vendors so that they can bid on the proposal.Educate the team on the RFP sections to support team members not familiar with developing RFP’sResearch the requirements for the bid (where required), writing the RFP document and draft SOW, hardware and/or software agreement to be included in the RFP.Review and assess scope of work/specifications and requirements (e.g., budget/project approval, estimate, schedule, technical details, etc.)Prepare competitive tender/proposals for goods and services, development of evaluation criteria for proposals, evaluations of commercial submissions and recommendations for contract awards.Prepare and issue contract documents for the procurement of goods and services, standard letters, purchase orders and procurement tender/proposal documents.Review the scope of work, specifications and requirements to ensure that prerequisites have been provided (e.g., estimate, schedule, technical details, business requirements etc.).Work with project teams and collaborate with legal to include appropriate terms and conditions adhering to guidelines.Assist with proposal evaluations and contract negotiation and administration activities.Facilitate and manage the end-to-end procurement process to issue the RFPRFP Writer – Mandatory SkillsUniversity Degree or College Diploma in Business or a related discipline, or a combination of education, training, and experience deemed to be equivalent combined with progressively responsible experience in a hybrid or complex procurement and/or supply organization.Must demonstrate experience (detailed in resume) relevant to the scopeFive (5) years of demonstrated relevant experienceProven experience in authoring RFPs for complex Enterprise procurement of software, hardware, and implementation services.Preference will be given to SAP RFP authoring experiencePlease send your resume in confidence to paul.dusome@randstad.caQualificationsUniversity Degree or College Diploma in Business or a related discipline, or a combination of education, training, and experience deemed to be equivalent combined with progressively responsible experience in a hybrid or complex procurement and/or supply organization.SummaryDevelop various Request for Proposals (RFPs)/RFIs for the SAP ProgramFocus on business scope, scope including Hardware, Software, and services including procurement of SAP enterprise software for both cloud and on premise technology.Authoring documents known as Requests for Proposal or RFP/Request for Information (RFI) and others; these request documents will be sent out to vendors so that they can bid on the proposal.Educate the team on the RFP sections to support team members not familiar with developing RFP’sResearch the requirements for the bid (where required), writing the RFP document and draft SOW, hardware and/or software agreement to be included in the RFP.Review and assess scope of work/specifications and requirements (e.g., budget/project approval, estimate, schedule, technical details, etc.)Prepare competitive tender/proposals for goods and services, development of evaluation criteria for proposals, evaluations of commercial submissions and recommendations for contract awards.Prepare and issue contract documents for the procurement of goods and services, standard letters, purchase orders and procurement tender/proposal documents.Review the scope of work, specifications and requirements to ensure that prerequisites have been provided (e.g., estimate, schedule, technical details, business requirements etc.).Work with project teams and collaborate with legal to include appropriate terms and conditions adhering to guidelines.Assist with proposal evaluations and contract negotiation and administration activities.Facilitate and manage the end-to-end procurement process to issue the RFPRFP Writer – Mandatory SkillsUniversity Degree or College Diploma in Business or a related discipline, or a combination of education, training, and experience deemed to be equivalent combined with progressively responsible experience in a hybrid or complex procurement and/or supply organization.Must demonstrate experience (detailed in resume) relevant to the scopeFive (5) years of demonstrated relevant experienceProven experience in authoring RFPs for complex Enterprise procurement of software, hardware, and implementation services.Preference will be given to SAP RFP authoring experiencePlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      Duties & Responsibilities:• Accountable for the negotiation, application and acquisition of permits such as MTO, Conservation Authorities, Railways, Pipeline crossing agreements, building permits, demolition permits etc. for integrity, growth & maintenance projects• collaborative team player that is flexible and has excellent communication skills• Ability to manage numerous high-risk projects at one time.MUST HAVE qualifications:• 2-3 years’ permitting experience including environmental and permitting,• project management experience• Working knowledge of Conservation Authority regulations and Ontario Water Resources act regulations.• Ability to manage multiple tasks and to work with minimal supervision.• Excellent organization skills and positive professional performing highly independent, technical and coordination work.• Demonstrated ability to communicate and interact effectively in a team environment.• Computer skills using Microsoft Office products.• Valid driver’s license.NICE TO HAVE qualifications:• Ability to read and understand construction drawings (plan, profile, and cross-section), internal/external standards, industry regulations, and associated reports, in support of permit applications. Request drawing revision, if necessary• Planning experience, legal knowledge with respect to permit acquisitions• Previous utility, natural gas pipeline or construction experiences an asset.Working Conditions:Office based position that requires infrequent travel to construction site for field visits and some off site meetings with external clients.Location can be either Chatham or North York ONPlease send your resume in confidence to paul.dusome@randstad.caAdvantagesNICE TO HAVE qualifications:• Ability to read and understand construction drawings (plan, profile, and cross-section), internal/external standards, industry regulations, and associated reports, in support of permit applications. Request drawing revision, if necessary• Planning experience, legal knowledge with respect to permit acquisitions• Previous utility, natural gas pipeline or construction experiences an asset.ResponsibilitiesDuties & Responsibilities:• Accountable for the negotiation, application and acquisition of permits such as MTO, Conservation Authorities, Railways, Pipeline crossing agreements, building permits, demolition permits etc. for integrity, growth & maintenance projects• collaborative team player that is flexible and has excellent communication skills• Ability to manage numerous high-risk projects at one time.MUST HAVE qualifications:• 2-3 years’ permitting experience including environmental and permitting,• project management experience• Working knowledge of Conservation Authority regulations and Ontario Water Resources act regulations.• Ability to manage multiple tasks and to work with minimal supervision.• Excellent organization skills and positive professional performing highly independent, technical and coordination work.• Demonstrated ability to communicate and interact effectively in a team environment.• Computer skills using Microsoft Office products.• Valid driver’s license.NICE TO HAVE qualifications:• Ability to read and understand construction drawings (plan, profile, and cross-section), internal/external standards, industry regulations, and associated reports, in support of permit applications. Request drawing revision, if necessary• Planning experience, legal knowledge with respect to permit acquisitions• Previous utility, natural gas pipeline or construction experiences an asset.Working Conditions:Office based position that requires infrequent travel to construction site for field visits and some off site meetings with external clients.Location can be either Chatham or North York ONPlease send your resume in confidence to paul.dusome@randstad.caQualifications• 2-3 years’ permitting experience including environmental and permitting,• project management experience• Working knowledge of Conservation Authority regulations and Ontario Water Resources act regulations.• Ability to manage multiple tasks and to work with minimal supervision.• Excellent organization skills and positive professional performing highly independent, technical and coordination work.• Demonstrated ability to communicate and interact effectively in a team environment.• Computer skills using Microsoft Office products.• Valid driver’s license.SummaryDuties & Responsibilities:• Accountable for the negotiation, application and acquisition of permits such as MTO, Conservation Authorities, Railways, Pipeline crossing agreements, building permits, demolition permits etc. for integrity, growth & maintenance projects• collaborative team player that is flexible and has excellent communication skills• Ability to manage numerous high-risk projects at one time.MUST HAVE qualifications:• 2-3 years’ permitting experience including environmental and permitting,• project management experience• Working knowledge of Conservation Authority regulations and Ontario Water Resources act regulations.• Ability to manage multiple tasks and to work with minimal supervision.• Excellent organization skills and positive professional performing highly independent, technical and coordination work.• Demonstrated ability to communicate and interact effectively in a team environment.• Computer skills using Microsoft Office products.• Valid driver’s license.NICE TO HAVE qualifications:• Ability to read and understand construction drawings (plan, profile, and cross-section), internal/external standards, industry regulations, and associated reports, in support of permit applications. Request drawing revision, if necessary• Planning experience, legal knowledge with respect to permit acquisitions• Previous utility, natural gas pipeline or construction experiences an asset.Working Conditions:Office based position that requires infrequent travel to construction site for field visits and some off site meetings with external clients.Location can be either Chatham or North York ONPlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Duties & Responsibilities:• Accountable for the negotiation, application and acquisition of permits such as MTO, Conservation Authorities, Railways, Pipeline crossing agreements, building permits, demolition permits etc. for integrity, growth & maintenance projects• collaborative team player that is flexible and has excellent communication skills• Ability to manage numerous high-risk projects at one time.MUST HAVE qualifications:• 2-3 years’ permitting experience including environmental and permitting,• project management experience• Working knowledge of Conservation Authority regulations and Ontario Water Resources act regulations.• Ability to manage multiple tasks and to work with minimal supervision.• Excellent organization skills and positive professional performing highly independent, technical and coordination work.• Demonstrated ability to communicate and interact effectively in a team environment.• Computer skills using Microsoft Office products.• Valid driver’s license.NICE TO HAVE qualifications:• Ability to read and understand construction drawings (plan, profile, and cross-section), internal/external standards, industry regulations, and associated reports, in support of permit applications. Request drawing revision, if necessary• Planning experience, legal knowledge with respect to permit acquisitions• Previous utility, natural gas pipeline or construction experiences an asset.Working Conditions:Office based position that requires infrequent travel to construction site for field visits and some off site meetings with external clients.Location can be either Chatham or North York ONPlease send your resume in confidence to paul.dusome@randstad.caAdvantagesNICE TO HAVE qualifications:• Ability to read and understand construction drawings (plan, profile, and cross-section), internal/external standards, industry regulations, and associated reports, in support of permit applications. Request drawing revision, if necessary• Planning experience, legal knowledge with respect to permit acquisitions• Previous utility, natural gas pipeline or construction experiences an asset.ResponsibilitiesDuties & Responsibilities:• Accountable for the negotiation, application and acquisition of permits such as MTO, Conservation Authorities, Railways, Pipeline crossing agreements, building permits, demolition permits etc. for integrity, growth & maintenance projects• collaborative team player that is flexible and has excellent communication skills• Ability to manage numerous high-risk projects at one time.MUST HAVE qualifications:• 2-3 years’ permitting experience including environmental and permitting,• project management experience• Working knowledge of Conservation Authority regulations and Ontario Water Resources act regulations.• Ability to manage multiple tasks and to work with minimal supervision.• Excellent organization skills and positive professional performing highly independent, technical and coordination work.• Demonstrated ability to communicate and interact effectively in a team environment.• Computer skills using Microsoft Office products.• Valid driver’s license.NICE TO HAVE qualifications:• Ability to read and understand construction drawings (plan, profile, and cross-section), internal/external standards, industry regulations, and associated reports, in support of permit applications. Request drawing revision, if necessary• Planning experience, legal knowledge with respect to permit acquisitions• Previous utility, natural gas pipeline or construction experiences an asset.Working Conditions:Office based position that requires infrequent travel to construction site for field visits and some off site meetings with external clients.Location can be either Chatham or North York ONPlease send your resume in confidence to paul.dusome@randstad.caQualifications• 2-3 years’ permitting experience including environmental and permitting,• project management experience• Working knowledge of Conservation Authority regulations and Ontario Water Resources act regulations.• Ability to manage multiple tasks and to work with minimal supervision.• Excellent organization skills and positive professional performing highly independent, technical and coordination work.• Demonstrated ability to communicate and interact effectively in a team environment.• Computer skills using Microsoft Office products.• Valid driver’s license.SummaryDuties & Responsibilities:• Accountable for the negotiation, application and acquisition of permits such as MTO, Conservation Authorities, Railways, Pipeline crossing agreements, building permits, demolition permits etc. for integrity, growth & maintenance projects• collaborative team player that is flexible and has excellent communication skills• Ability to manage numerous high-risk projects at one time.MUST HAVE qualifications:• 2-3 years’ permitting experience including environmental and permitting,• project management experience• Working knowledge of Conservation Authority regulations and Ontario Water Resources act regulations.• Ability to manage multiple tasks and to work with minimal supervision.• Excellent organization skills and positive professional performing highly independent, technical and coordination work.• Demonstrated ability to communicate and interact effectively in a team environment.• Computer skills using Microsoft Office products.• Valid driver’s license.NICE TO HAVE qualifications:• Ability to read and understand construction drawings (plan, profile, and cross-section), internal/external standards, industry regulations, and associated reports, in support of permit applications. Request drawing revision, if necessary• Planning experience, legal knowledge with respect to permit acquisitions• Previous utility, natural gas pipeline or construction experiences an asset.Working Conditions:Office based position that requires infrequent travel to construction site for field visits and some off site meetings with external clients.Location can be either Chatham or North York ONPlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Ottawa, Ontario
      • Contract
      Under the supervision of the Clinical Lab Lead Hand; the Finishes Goods Quality Control Laboratory Technician is responsible for: Duties and Responsibilities•Testing of cards •Testing of Readers •Testing of Capillary tubes•Routine performance checks including Adaptive Process Control, linearity, lifetimes, and validations •Assistance with testing requirements for Process Engineering, Test Engineering and R&D experimentsAssisting in routine upkeep and operational tasks related to the Clinical Lab AdvantagesKey tasks and activities will be completed with guidance and supervision from a higher-level technician or team leader:•Testing for various purposes (using written instructions) of card lots/readers/capillary tubes coming from the assembly departments. •Carries out routine maintenance and basic troubleshooting of clinical lab testing equipment and records these activities in maintenance logs with assistance and guidance form a higher-level technician.•Ability to track inventory of clinical lab supplies and replace what is in house and communicate to responsible personnel reorder points.•Participates in testing process and equipment improvement efforts, including experimental testing. Maintains appropriate records for testing.Percent of TimeFrequencyActivity50DailyProduction card Lot, Reader and Capillary tube testing, Analysis45DailyExperimental Lot Testing5Daily / WeeklyTest Equipment Maintenance / PhlebotomyResponsibilitiesDemands•Routine, detailed nature of testing•Flexibility required for varied nature of testing•Regular and reoccurring exposure to blood from screened donors•Flexibility with adjusting work hours to follow up with overnight shifts as scheduled•Attention to detail is vital•Proven ability to work and communicate effectively in a team environment while satisfying personal responsibilities•Ability to function in a fast-paced environment•Ability to organize and prioritize responsibilities and multi-task•Ability to assess and troubleshoot computers, software applications and equipment•Ready to speak up about concerns•Satisfaction derived from solid completion of tasks •Clear understanding of health and safety in a lab environment•PhysicaloManual dexterity oAbility to distinguish between coloursoCombination of sitting and standingoExtended periods of detailed visual inspectionoInvolves regular and recurring exposure to blood from screened donorsoWork involves inventorying and processing cards, which requires walking, bending, stretching and occasionally lifting boxes of up to 20lbsQualificationsSkills & Qualifications (Education and Experience)•Post-secondary education in a field of Science or related field, and/or combination of education and technical experience acceptable to Epocal•Proficient in using MS Office Suite (i.e. Excel, Word, PowerPoint) and capable in troubleshooting basic technological issues•Clinical laboratory experience such as blood testing, use of pipettes, centrifuges, and table-top analyzers is an asset•Some working knowledge of GMP and Good lab practices•Knowledge of basic statistics is preferred•Trained phlebotomist is considered an assetSummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.caThank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Under the supervision of the Clinical Lab Lead Hand; the Finishes Goods Quality Control Laboratory Technician is responsible for: Duties and Responsibilities•Testing of cards •Testing of Readers •Testing of Capillary tubes•Routine performance checks including Adaptive Process Control, linearity, lifetimes, and validations •Assistance with testing requirements for Process Engineering, Test Engineering and R&D experimentsAssisting in routine upkeep and operational tasks related to the Clinical Lab AdvantagesKey tasks and activities will be completed with guidance and supervision from a higher-level technician or team leader:•Testing for various purposes (using written instructions) of card lots/readers/capillary tubes coming from the assembly departments. •Carries out routine maintenance and basic troubleshooting of clinical lab testing equipment and records these activities in maintenance logs with assistance and guidance form a higher-level technician.•Ability to track inventory of clinical lab supplies and replace what is in house and communicate to responsible personnel reorder points.•Participates in testing process and equipment improvement efforts, including experimental testing. Maintains appropriate records for testing.Percent of TimeFrequencyActivity50DailyProduction card Lot, Reader and Capillary tube testing, Analysis45DailyExperimental Lot Testing5Daily / WeeklyTest Equipment Maintenance / PhlebotomyResponsibilitiesDemands•Routine, detailed nature of testing•Flexibility required for varied nature of testing•Regular and reoccurring exposure to blood from screened donors•Flexibility with adjusting work hours to follow up with overnight shifts as scheduled•Attention to detail is vital•Proven ability to work and communicate effectively in a team environment while satisfying personal responsibilities•Ability to function in a fast-paced environment•Ability to organize and prioritize responsibilities and multi-task•Ability to assess and troubleshoot computers, software applications and equipment•Ready to speak up about concerns•Satisfaction derived from solid completion of tasks •Clear understanding of health and safety in a lab environment•PhysicaloManual dexterity oAbility to distinguish between coloursoCombination of sitting and standingoExtended periods of detailed visual inspectionoInvolves regular and recurring exposure to blood from screened donorsoWork involves inventorying and processing cards, which requires walking, bending, stretching and occasionally lifting boxes of up to 20lbsQualificationsSkills & Qualifications (Education and Experience)•Post-secondary education in a field of Science or related field, and/or combination of education and technical experience acceptable to Epocal•Proficient in using MS Office Suite (i.e. Excel, Word, PowerPoint) and capable in troubleshooting basic technological issues•Clinical laboratory experience such as blood testing, use of pipettes, centrifuges, and table-top analyzers is an asset•Some working knowledge of GMP and Good lab practices•Knowledge of basic statistics is preferred•Trained phlebotomist is considered an assetSummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.caThank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      Duties & Responsibilities:• Work closely with engineers to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines• Demonstrate strong work ethic in all areasMUST HAVE qualifications:DITA/XMLNICE TO HAVE qualifications:CCMSWorking Conditions:- working from home to start - expectation to be onsite once provincial guidelines allow for offices to re-openPlease send your resume in confidence to paul.dusome@randstad.caAdvantagesMUST HAVE qualifications:DITA/XMLNICE TO HAVE qualifications:CCMS• Manage multiple streams of work and parallel deadlinesResponsibilitiesDuties & Responsibilities:• Work closely with engineers to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines• Demonstrate strong work ethic in all areasMUST HAVE qualifications:DITA/XMLNICE TO HAVE qualifications:CCMSWorking Conditions:- working from home to start - expectation to be onsite once provincial guidelines allow for offices to re-openPlease send your resume in confidence to paul.dusome@randstad.caQualifications3-5 years of experience in a writing environment Must have DITA/XML experience SummaryDuties & Responsibilities:• Work closely with engineers to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines• Demonstrate strong work ethic in all areasMUST HAVE qualifications:DITA/XMLNICE TO HAVE qualifications:CCMSWorking Conditions:- working from home to start - expectation to be onsite once provincial guidelines allow for offices to re-openPlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Duties & Responsibilities:• Work closely with engineers to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines• Demonstrate strong work ethic in all areasMUST HAVE qualifications:DITA/XMLNICE TO HAVE qualifications:CCMSWorking Conditions:- working from home to start - expectation to be onsite once provincial guidelines allow for offices to re-openPlease send your resume in confidence to paul.dusome@randstad.caAdvantagesMUST HAVE qualifications:DITA/XMLNICE TO HAVE qualifications:CCMS• Manage multiple streams of work and parallel deadlinesResponsibilitiesDuties & Responsibilities:• Work closely with engineers to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines• Demonstrate strong work ethic in all areasMUST HAVE qualifications:DITA/XMLNICE TO HAVE qualifications:CCMSWorking Conditions:- working from home to start - expectation to be onsite once provincial guidelines allow for offices to re-openPlease send your resume in confidence to paul.dusome@randstad.caQualifications3-5 years of experience in a writing environment Must have DITA/XML experience SummaryDuties & Responsibilities:• Work closely with engineers to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines• Demonstrate strong work ethic in all areasMUST HAVE qualifications:DITA/XMLNICE TO HAVE qualifications:CCMSWorking Conditions:- working from home to start - expectation to be onsite once provincial guidelines allow for offices to re-openPlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Morriston, Ontario
      • Contract
      Looking for New Grads with a background in Chemistry!!Are you a new grad from a post secondary program in Chemistry (or related field)? Are you open to contract opportunities to gain experience? If so, this position could be for you! Our client in the Guelph area has partnered with Randstad Engineering in their search for contract Lab Support. AdvantagesThis is a short term contract opportunity, but with potential for extension!ResponsibilitiesIn this contract position, you would be working closely with the Quality and Food Safety team, providing lab support and completing various tasks. Qualifications•Post secondary education within Chemistry (or related field)•Hard working •Able to complete tasks with minimal supervision •Flexible to work a short term contract positionSummaryIf you are interested in this opportunity, apply today! Or send your resume to Lisa Medeiros at Lisa.Medeiros@randstad.ca. We are excited to discuss this opportunity further with you!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Looking for New Grads with a background in Chemistry!!Are you a new grad from a post secondary program in Chemistry (or related field)? Are you open to contract opportunities to gain experience? If so, this position could be for you! Our client in the Guelph area has partnered with Randstad Engineering in their search for contract Lab Support. AdvantagesThis is a short term contract opportunity, but with potential for extension!ResponsibilitiesIn this contract position, you would be working closely with the Quality and Food Safety team, providing lab support and completing various tasks. Qualifications•Post secondary education within Chemistry (or related field)•Hard working •Able to complete tasks with minimal supervision •Flexible to work a short term contract positionSummaryIf you are interested in this opportunity, apply today! Or send your resume to Lisa Medeiros at Lisa.Medeiros@randstad.ca. We are excited to discuss this opportunity further with you!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      Work Location: 500 Consumers Rd, North York, Ontario, CAN, M2J 1P8Job Title: Technical WriterDuties & Responsibilities:Candidates MUST HAVE qualifications in order to be interviewed: -demonstrated professional experience authoring technical documentation in DITA XML in a CCMS environment (Ixiasoft preferred) for a minimum of 2 years.- Must be able to work at either one of our Ontario offices (North York or Chatham Kent)- Must be able to begin returning to the office starting at one day per week in August and then increasing that frequency as more restrictions are lifted.• Work closely with engineers and other projects stakeholders including SMEs to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines• Demonstrate strong work ethic in all areas-Strong demonstrated time management skills-Strong candidates will be those who take initiative and work well under minimal supervision, acting as project managers for all their documentation projects-Displays positive attitude and team spirit-Comfortable conducting and leading meetings with clients and other project stakeholders-Very familiar with topic-based authoring and minimalist writing principles-Demonstrate professional demeanor in all engagements both with clients and team members-Able to adapt to digital transformation initiatives-Demonstrate short learning curve when exposed to new DITA XML conceptsPreferred experience:-Sharepoint-Adobe Experience Manager-JIRAPlease send your resume in confidence to paul.dusome@randstad.caAdvantages-Sharepoint-Adobe Experience Manager-JIRADITA XML in a CCMS environment (Ixiasoft preferred) for a minimum of 2 years.ResponsibilitiesWork Location: 500 Consumers Rd, North York, Ontario, CAN, M2J 1P8Job Title: Technical WriterDuties & Responsibilities:Candidates MUST HAVE qualifications in order to be interviewed: -demonstrated professional experience authoring technical documentation in DITA XML in a CCMS environment (Ixiasoft preferred) for a minimum of 2 years.- Must be able to work at either one of our Ontario offices (North York or Chatham Kent)- Must be able to begin returning to the office starting at one day per week in August and then increasing that frequency as more restrictions are lifted.• Work closely with engineers and other projects stakeholders including SMEs to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines• Demonstrate strong work ethic in all areas-Strong demonstrated time management skills-Strong candidates will be those who take initiative and work well under minimal supervision, acting as project managers for all their documentation projects-Displays positive attitude and team spirit-Comfortable conducting and leading meetings with clients and other project stakeholders-Very familiar with topic-based authoring and minimalist writing principles-Demonstrate professional demeanor in all engagements both with clients and team members-Able to adapt to digital transformation initiatives-Demonstrate short learning curve when exposed to new DITA XML conceptsPreferred experience:-Sharepoint-Adobe Experience Manager-JIRAPlease send your resume in confidence to paul.dusome@randstad.caQualifications-demonstrated professional experience authoring technical documentation in DITA XML in a CCMS environment (Ixiasoft preferred) for a minimum of 2 years.• Work closely with engineers and other projects stakeholders including SMEs to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.SummaryWork Location: 500 Consumers Rd, North York, Ontario, CAN, M2J 1P8Job Title: Technical WriterDuties & Responsibilities:Candidates MUST HAVE qualifications in order to be interviewed: -demonstrated professional experience authoring technical documentation in DITA XML in a CCMS environment (Ixiasoft preferred) for a minimum of 2 years.- Must be able to work at either one of our Ontario offices (North York or Chatham Kent)- Must be able to begin returning to the office starting at one day per week in August and then increasing that frequency as more restrictions are lifted.• Work closely with engineers and other projects stakeholders including SMEs to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines• Demonstrate strong work ethic in all areas-Strong demonstrated time management skills-Strong candidates will be those who take initiative and work well under minimal supervision, acting as project managers for all their documentation projects-Displays positive attitude and team spirit-Comfortable conducting and leading meetings with clients and other project stakeholders-Very familiar with topic-based authoring and minimalist writing principles-Demonstrate professional demeanor in all engagements both with clients and team members-Able to adapt to digital transformation initiatives-Demonstrate short learning curve when exposed to new DITA XML conceptsPreferred experience:-Sharepoint-Adobe Experience Manager-JIRAPlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Work Location: 500 Consumers Rd, North York, Ontario, CAN, M2J 1P8Job Title: Technical WriterDuties & Responsibilities:Candidates MUST HAVE qualifications in order to be interviewed: -demonstrated professional experience authoring technical documentation in DITA XML in a CCMS environment (Ixiasoft preferred) for a minimum of 2 years.- Must be able to work at either one of our Ontario offices (North York or Chatham Kent)- Must be able to begin returning to the office starting at one day per week in August and then increasing that frequency as more restrictions are lifted.• Work closely with engineers and other projects stakeholders including SMEs to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines• Demonstrate strong work ethic in all areas-Strong demonstrated time management skills-Strong candidates will be those who take initiative and work well under minimal supervision, acting as project managers for all their documentation projects-Displays positive attitude and team spirit-Comfortable conducting and leading meetings with clients and other project stakeholders-Very familiar with topic-based authoring and minimalist writing principles-Demonstrate professional demeanor in all engagements both with clients and team members-Able to adapt to digital transformation initiatives-Demonstrate short learning curve when exposed to new DITA XML conceptsPreferred experience:-Sharepoint-Adobe Experience Manager-JIRAPlease send your resume in confidence to paul.dusome@randstad.caAdvantages-Sharepoint-Adobe Experience Manager-JIRADITA XML in a CCMS environment (Ixiasoft preferred) for a minimum of 2 years.ResponsibilitiesWork Location: 500 Consumers Rd, North York, Ontario, CAN, M2J 1P8Job Title: Technical WriterDuties & Responsibilities:Candidates MUST HAVE qualifications in order to be interviewed: -demonstrated professional experience authoring technical documentation in DITA XML in a CCMS environment (Ixiasoft preferred) for a minimum of 2 years.- Must be able to work at either one of our Ontario offices (North York or Chatham Kent)- Must be able to begin returning to the office starting at one day per week in August and then increasing that frequency as more restrictions are lifted.• Work closely with engineers and other projects stakeholders including SMEs to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines• Demonstrate strong work ethic in all areas-Strong demonstrated time management skills-Strong candidates will be those who take initiative and work well under minimal supervision, acting as project managers for all their documentation projects-Displays positive attitude and team spirit-Comfortable conducting and leading meetings with clients and other project stakeholders-Very familiar with topic-based authoring and minimalist writing principles-Demonstrate professional demeanor in all engagements both with clients and team members-Able to adapt to digital transformation initiatives-Demonstrate short learning curve when exposed to new DITA XML conceptsPreferred experience:-Sharepoint-Adobe Experience Manager-JIRAPlease send your resume in confidence to paul.dusome@randstad.caQualifications-demonstrated professional experience authoring technical documentation in DITA XML in a CCMS environment (Ixiasoft preferred) for a minimum of 2 years.• Work closely with engineers and other projects stakeholders including SMEs to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.SummaryWork Location: 500 Consumers Rd, North York, Ontario, CAN, M2J 1P8Job Title: Technical WriterDuties & Responsibilities:Candidates MUST HAVE qualifications in order to be interviewed: -demonstrated professional experience authoring technical documentation in DITA XML in a CCMS environment (Ixiasoft preferred) for a minimum of 2 years.- Must be able to work at either one of our Ontario offices (North York or Chatham Kent)- Must be able to begin returning to the office starting at one day per week in August and then increasing that frequency as more restrictions are lifted.• Work closely with engineers and other projects stakeholders including SMEs to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines• Demonstrate strong work ethic in all areas-Strong demonstrated time management skills-Strong candidates will be those who take initiative and work well under minimal supervision, acting as project managers for all their documentation projects-Displays positive attitude and team spirit-Comfortable conducting and leading meetings with clients and other project stakeholders-Very familiar with topic-based authoring and minimalist writing principles-Demonstrate professional demeanor in all engagements both with clients and team members-Able to adapt to digital transformation initiatives-Demonstrate short learning curve when exposed to new DITA XML conceptsPreferred experience:-Sharepoint-Adobe Experience Manager-JIRAPlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

    Thank you for subscribing to your personalised job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.