Thank you for subscribing to your personalised job alerts.

    13 jobs found in kanata, ontario

    filter2
    clear all
      • North York, Ontario
      • Contract
      LOCATION: 500 Consumer Rd, North YorkDuties & Responsibilities:Provide hydraulic modelling support using the Synergi software application.MUST HAVE qualifications:Related University Engineering Degree or CET ProgramNICE TO HAVE qualifications:Experience with Synergi software or similarWorking Conditions:- Office environment - working from home to start - after COVID restrictions are lifted and offices re-open worker will be onsite at VPCAdditional details / description:Are you looking to build relationships and make an impact at Enbridge from the ground up? Join us as an Engineer-in-Training, Distribution Optimization Engineering to become part of a dynamic team responsible for planning and analyzing Enbridge Gas Inc’s distribution pipeline systems.You will have the opportunity to interact with many groups across the organization, support innovative, high profile projects and develop leadership competencies. If you are a problem solver with strong communication skills. Apply today!What You Will Do: •Overall responsibility to create update and maintain hydraulic network system models for our gas distribution client.•Overall responsibility to examine, design and analyze the effects of various system alterations on system integrity and reliability, and propose new or altered infrastructure, such as reinforcements, as required.•Provide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.•Identify changes in customer load profiles and assist in incorporating these changes into the load gathering program and network analysis design standards, thereby ensuring accuracy of the annual simulation and forecast analysis•Analyze and forecast the short and long-range distribution system operating and infrastructure requirements under varying conditions for all regions within the EGI distribution system.•Conduct network impact reports and contingency plans as required ensuring system reliability and minimizing system disruptions.•Provide consultation to other internal groups, such as Network Operations, Gas Control, AR&I, Construction, Engineering, Integrity, Key Accounts, etc.Who You Are:You have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.Please send your resume in confidence to paul.dusome@randstad.caAdvantagesProvide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.ResponsibilitiesLOCATION: 500 Consumer Rd, North YorkDuties & Responsibilities:Provide hydraulic modelling support using the Synergi software application.MUST HAVE qualifications:Related University Engineering Degree or CET ProgramNICE TO HAVE qualifications:Experience with Synergi software or similarWorking Conditions:- Office environment - working from home to start - after COVID restrictions are lifted and offices re-open worker will be onsite at VPCAdditional details / description:Are you looking to build relationships and make an impact at Enbridge from the ground up? Join us as an Engineer-in-Training, Distribution Optimization Engineering to become part of a dynamic team responsible for planning and analyzing Enbridge Gas Inc’s distribution pipeline systems.You will have the opportunity to interact with many groups across the organization, support innovative, high profile projects and develop leadership competencies. If you are a problem solver with strong communication skills. Apply today!What You Will Do: •Overall responsibility to create update and maintain hydraulic network system models for our gas distribution client.•Overall responsibility to examine, design and analyze the effects of various system alterations on system integrity and reliability, and propose new or altered infrastructure, such as reinforcements, as required.•Provide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.•Identify changes in customer load profiles and assist in incorporating these changes into the load gathering program and network analysis design standards, thereby ensuring accuracy of the annual simulation and forecast analysis•Analyze and forecast the short and long-range distribution system operating and infrastructure requirements under varying conditions for all regions within the EGI distribution system.•Conduct network impact reports and contingency plans as required ensuring system reliability and minimizing system disruptions.•Provide consultation to other internal groups, such as Network Operations, Gas Control, AR&I, Construction, Engineering, Integrity, Key Accounts, etc.Who You Are:You have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.Please send your resume in confidence to paul.dusome@randstad.caQualificationsYou have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.SummaryLOCATION: 500 Consumer Rd, North YorkDuties & Responsibilities:Provide hydraulic modelling support using the Synergi software application.MUST HAVE qualifications:Related University Engineering Degree or CET ProgramNICE TO HAVE qualifications:Experience with Synergi software or similarWorking Conditions:- Office environment - working from home to start - after COVID restrictions are lifted and offices re-open worker will be onsite at VPCAdditional details / description:Are you looking to build relationships and make an impact at Enbridge from the ground up? Join us as an Engineer-in-Training, Distribution Optimization Engineering to become part of a dynamic team responsible for planning and analyzing Enbridge Gas Inc’s distribution pipeline systems.You will have the opportunity to interact with many groups across the organization, support innovative, high profile projects and develop leadership competencies. If you are a problem solver with strong communication skills. Apply today!What You Will Do: •Overall responsibility to create update and maintain hydraulic network system models for our gas distribution client.•Overall responsibility to examine, design and analyze the effects of various system alterations on system integrity and reliability, and propose new or altered infrastructure, such as reinforcements, as required.•Provide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.•Identify changes in customer load profiles and assist in incorporating these changes into the load gathering program and network analysis design standards, thereby ensuring accuracy of the annual simulation and forecast analysis•Analyze and forecast the short and long-range distribution system operating and infrastructure requirements under varying conditions for all regions within the EGI distribution system.•Conduct network impact reports and contingency plans as required ensuring system reliability and minimizing system disruptions.•Provide consultation to other internal groups, such as Network Operations, Gas Control, AR&I, Construction, Engineering, Integrity, Key Accounts, etc.Who You Are:You have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      LOCATION: 500 Consumer Rd, North YorkDuties & Responsibilities:Provide hydraulic modelling support using the Synergi software application.MUST HAVE qualifications:Related University Engineering Degree or CET ProgramNICE TO HAVE qualifications:Experience with Synergi software or similarWorking Conditions:- Office environment - working from home to start - after COVID restrictions are lifted and offices re-open worker will be onsite at VPCAdditional details / description:Are you looking to build relationships and make an impact at Enbridge from the ground up? Join us as an Engineer-in-Training, Distribution Optimization Engineering to become part of a dynamic team responsible for planning and analyzing Enbridge Gas Inc’s distribution pipeline systems.You will have the opportunity to interact with many groups across the organization, support innovative, high profile projects and develop leadership competencies. If you are a problem solver with strong communication skills. Apply today!What You Will Do: •Overall responsibility to create update and maintain hydraulic network system models for our gas distribution client.•Overall responsibility to examine, design and analyze the effects of various system alterations on system integrity and reliability, and propose new or altered infrastructure, such as reinforcements, as required.•Provide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.•Identify changes in customer load profiles and assist in incorporating these changes into the load gathering program and network analysis design standards, thereby ensuring accuracy of the annual simulation and forecast analysis•Analyze and forecast the short and long-range distribution system operating and infrastructure requirements under varying conditions for all regions within the EGI distribution system.•Conduct network impact reports and contingency plans as required ensuring system reliability and minimizing system disruptions.•Provide consultation to other internal groups, such as Network Operations, Gas Control, AR&I, Construction, Engineering, Integrity, Key Accounts, etc.Who You Are:You have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.Please send your resume in confidence to paul.dusome@randstad.caAdvantagesProvide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.ResponsibilitiesLOCATION: 500 Consumer Rd, North YorkDuties & Responsibilities:Provide hydraulic modelling support using the Synergi software application.MUST HAVE qualifications:Related University Engineering Degree or CET ProgramNICE TO HAVE qualifications:Experience with Synergi software or similarWorking Conditions:- Office environment - working from home to start - after COVID restrictions are lifted and offices re-open worker will be onsite at VPCAdditional details / description:Are you looking to build relationships and make an impact at Enbridge from the ground up? Join us as an Engineer-in-Training, Distribution Optimization Engineering to become part of a dynamic team responsible for planning and analyzing Enbridge Gas Inc’s distribution pipeline systems.You will have the opportunity to interact with many groups across the organization, support innovative, high profile projects and develop leadership competencies. If you are a problem solver with strong communication skills. Apply today!What You Will Do: •Overall responsibility to create update and maintain hydraulic network system models for our gas distribution client.•Overall responsibility to examine, design and analyze the effects of various system alterations on system integrity and reliability, and propose new or altered infrastructure, such as reinforcements, as required.•Provide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.•Identify changes in customer load profiles and assist in incorporating these changes into the load gathering program and network analysis design standards, thereby ensuring accuracy of the annual simulation and forecast analysis•Analyze and forecast the short and long-range distribution system operating and infrastructure requirements under varying conditions for all regions within the EGI distribution system.•Conduct network impact reports and contingency plans as required ensuring system reliability and minimizing system disruptions.•Provide consultation to other internal groups, such as Network Operations, Gas Control, AR&I, Construction, Engineering, Integrity, Key Accounts, etc.Who You Are:You have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.Please send your resume in confidence to paul.dusome@randstad.caQualificationsYou have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.SummaryLOCATION: 500 Consumer Rd, North YorkDuties & Responsibilities:Provide hydraulic modelling support using the Synergi software application.MUST HAVE qualifications:Related University Engineering Degree or CET ProgramNICE TO HAVE qualifications:Experience with Synergi software or similarWorking Conditions:- Office environment - working from home to start - after COVID restrictions are lifted and offices re-open worker will be onsite at VPCAdditional details / description:Are you looking to build relationships and make an impact at Enbridge from the ground up? Join us as an Engineer-in-Training, Distribution Optimization Engineering to become part of a dynamic team responsible for planning and analyzing Enbridge Gas Inc’s distribution pipeline systems.You will have the opportunity to interact with many groups across the organization, support innovative, high profile projects and develop leadership competencies. If you are a problem solver with strong communication skills. Apply today!What You Will Do: •Overall responsibility to create update and maintain hydraulic network system models for our gas distribution client.•Overall responsibility to examine, design and analyze the effects of various system alterations on system integrity and reliability, and propose new or altered infrastructure, such as reinforcements, as required.•Provide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.•Identify changes in customer load profiles and assist in incorporating these changes into the load gathering program and network analysis design standards, thereby ensuring accuracy of the annual simulation and forecast analysis•Analyze and forecast the short and long-range distribution system operating and infrastructure requirements under varying conditions for all regions within the EGI distribution system.•Conduct network impact reports and contingency plans as required ensuring system reliability and minimizing system disruptions.•Provide consultation to other internal groups, such as Network Operations, Gas Control, AR&I, Construction, Engineering, Integrity, Key Accounts, etc.Who You Are:You have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      LOCATION: 500 Consumer Rd, North YorkDuties & Responsibilities:Provide hydraulic modelling support using the Synergi software application.MUST HAVE qualifications:Related University Engineering Degree or CET ProgramNICE TO HAVE qualifications:Experience with Synergi software or similarWorking Conditions:- Office environment - working from home to start - after COVID restrictions are lifted and offices re-open worker will be onsite at VPCAdditional details / description:Are you looking to build relationships and make an impact at Enbridge from the ground up? Join us as an Engineer-in-Training, Distribution Optimization Engineering to become part of a dynamic team responsible for planning and analyzing Enbridge Gas Inc’s distribution pipeline systems.You will have the opportunity to interact with many groups across the organization, support innovative, high profile projects and develop leadership competencies. If you are a problem solver with strong communication skills. What You Will Do: •Overall responsibility to create update and maintain hydraulic network system models for our gas distribution client.•Overall responsibility to examine, design and analyze the effects of various system alterations on system integrity and reliability, and propose new or altered infrastructure, such as reinforcements, as required.•Provide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.•Identify changes in customer load profiles and assist in incorporating these changes into the load gathering program and network analysis design standards, thereby ensuring accuracy of the annual simulation and forecast analysis•Analyze and forecast the short and long-range distribution system operating and infrastructure requirements under varying conditions for all regions within the EGI distribution system.•Conduct network impact reports and contingency plans as required ensuring system reliability and minimizing system disruptions.•Provide consultation to other internal groups, such as Network Operations, Gas Control, AR&I, Construction, Engineering, Integrity, Key Accounts, etc.Who You Are:You have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.Please send your resume in confidence to paul.dusome@randstad.caAdvantagesProvide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.ResponsibilitiesLOCATION: 500 Consumer Rd, North YorkDuties & Responsibilities:Provide hydraulic modelling support using the Synergi software application.MUST HAVE qualifications:Related University Engineering Degree or CET ProgramNICE TO HAVE qualifications:Experience with Synergi software or similarWorking Conditions:- Office environment - working from home to start - after COVID restrictions are lifted and offices re-open worker will be onsite at VPCAdditional details / description:Are you looking to build relationships and make an impact at Enbridge from the ground up? Join us as an Engineer-in-Training, Distribution Optimization Engineering to become part of a dynamic team responsible for planning and analyzing Enbridge Gas Inc’s distribution pipeline systems.You will have the opportunity to interact with many groups across the organization, support innovative, high profile projects and develop leadership competencies. If you are a problem solver with strong communication skills. What You Will Do: •Overall responsibility to create update and maintain hydraulic network system models for our gas distribution client.•Overall responsibility to examine, design and analyze the effects of various system alterations on system integrity and reliability, and propose new or altered infrastructure, such as reinforcements, as required.•Provide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.•Identify changes in customer load profiles and assist in incorporating these changes into the load gathering program and network analysis design standards, thereby ensuring accuracy of the annual simulation and forecast analysis•Analyze and forecast the short and long-range distribution system operating and infrastructure requirements under varying conditions for all regions within the EGI distribution system.•Conduct network impact reports and contingency plans as required ensuring system reliability and minimizing system disruptions.•Provide consultation to other internal groups, such as Network Operations, Gas Control, AR&I, Construction, Engineering, Integrity, Key Accounts, etc.Who You Are:You have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.Please send your resume in confidence to paul.dusome@randstad.caQualificationsYou have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.SummaryLOCATION: 500 Consumer Rd, North YorkDuties & Responsibilities:Provide hydraulic modelling support using the Synergi software application.MUST HAVE qualifications:Related University Engineering Degree or CET ProgramNICE TO HAVE qualifications:Experience with Synergi software or similarWorking Conditions:- Office environment - working from home to start - after COVID restrictions are lifted and offices re-open worker will be onsite at VPCAdditional details / description:Are you looking to build relationships and make an impact at Enbridge from the ground up? Join us as an Engineer-in-Training, Distribution Optimization Engineering to become part of a dynamic team responsible for planning and analyzing Enbridge Gas Inc’s distribution pipeline systems.You will have the opportunity to interact with many groups across the organization, support innovative, high profile projects and develop leadership competencies. If you are a problem solver with strong communication skills. What You Will Do: •Overall responsibility to create update and maintain hydraulic network system models for our gas distribution client.•Overall responsibility to examine, design and analyze the effects of various system alterations on system integrity and reliability, and propose new or altered infrastructure, such as reinforcements, as required.•Provide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.•Identify changes in customer load profiles and assist in incorporating these changes into the load gathering program and network analysis design standards, thereby ensuring accuracy of the annual simulation and forecast analysis•Analyze and forecast the short and long-range distribution system operating and infrastructure requirements under varying conditions for all regions within the EGI distribution system.•Conduct network impact reports and contingency plans as required ensuring system reliability and minimizing system disruptions.•Provide consultation to other internal groups, such as Network Operations, Gas Control, AR&I, Construction, Engineering, Integrity, Key Accounts, etc.Who You Are:You have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      LOCATION: 500 Consumer Rd, North YorkDuties & Responsibilities:Provide hydraulic modelling support using the Synergi software application.MUST HAVE qualifications:Related University Engineering Degree or CET ProgramNICE TO HAVE qualifications:Experience with Synergi software or similarWorking Conditions:- Office environment - working from home to start - after COVID restrictions are lifted and offices re-open worker will be onsite at VPCAdditional details / description:Are you looking to build relationships and make an impact at Enbridge from the ground up? Join us as an Engineer-in-Training, Distribution Optimization Engineering to become part of a dynamic team responsible for planning and analyzing Enbridge Gas Inc’s distribution pipeline systems.You will have the opportunity to interact with many groups across the organization, support innovative, high profile projects and develop leadership competencies. If you are a problem solver with strong communication skills. What You Will Do: •Overall responsibility to create update and maintain hydraulic network system models for our gas distribution client.•Overall responsibility to examine, design and analyze the effects of various system alterations on system integrity and reliability, and propose new or altered infrastructure, such as reinforcements, as required.•Provide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.•Identify changes in customer load profiles and assist in incorporating these changes into the load gathering program and network analysis design standards, thereby ensuring accuracy of the annual simulation and forecast analysis•Analyze and forecast the short and long-range distribution system operating and infrastructure requirements under varying conditions for all regions within the EGI distribution system.•Conduct network impact reports and contingency plans as required ensuring system reliability and minimizing system disruptions.•Provide consultation to other internal groups, such as Network Operations, Gas Control, AR&I, Construction, Engineering, Integrity, Key Accounts, etc.Who You Are:You have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.Please send your resume in confidence to paul.dusome@randstad.caAdvantagesProvide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.ResponsibilitiesLOCATION: 500 Consumer Rd, North YorkDuties & Responsibilities:Provide hydraulic modelling support using the Synergi software application.MUST HAVE qualifications:Related University Engineering Degree or CET ProgramNICE TO HAVE qualifications:Experience with Synergi software or similarWorking Conditions:- Office environment - working from home to start - after COVID restrictions are lifted and offices re-open worker will be onsite at VPCAdditional details / description:Are you looking to build relationships and make an impact at Enbridge from the ground up? Join us as an Engineer-in-Training, Distribution Optimization Engineering to become part of a dynamic team responsible for planning and analyzing Enbridge Gas Inc’s distribution pipeline systems.You will have the opportunity to interact with many groups across the organization, support innovative, high profile projects and develop leadership competencies. If you are a problem solver with strong communication skills. What You Will Do: •Overall responsibility to create update and maintain hydraulic network system models for our gas distribution client.•Overall responsibility to examine, design and analyze the effects of various system alterations on system integrity and reliability, and propose new or altered infrastructure, such as reinforcements, as required.•Provide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.•Identify changes in customer load profiles and assist in incorporating these changes into the load gathering program and network analysis design standards, thereby ensuring accuracy of the annual simulation and forecast analysis•Analyze and forecast the short and long-range distribution system operating and infrastructure requirements under varying conditions for all regions within the EGI distribution system.•Conduct network impact reports and contingency plans as required ensuring system reliability and minimizing system disruptions.•Provide consultation to other internal groups, such as Network Operations, Gas Control, AR&I, Construction, Engineering, Integrity, Key Accounts, etc.Who You Are:You have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.Please send your resume in confidence to paul.dusome@randstad.caQualificationsYou have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.SummaryLOCATION: 500 Consumer Rd, North YorkDuties & Responsibilities:Provide hydraulic modelling support using the Synergi software application.MUST HAVE qualifications:Related University Engineering Degree or CET ProgramNICE TO HAVE qualifications:Experience with Synergi software or similarWorking Conditions:- Office environment - working from home to start - after COVID restrictions are lifted and offices re-open worker will be onsite at VPCAdditional details / description:Are you looking to build relationships and make an impact at Enbridge from the ground up? Join us as an Engineer-in-Training, Distribution Optimization Engineering to become part of a dynamic team responsible for planning and analyzing Enbridge Gas Inc’s distribution pipeline systems.You will have the opportunity to interact with many groups across the organization, support innovative, high profile projects and develop leadership competencies. If you are a problem solver with strong communication skills. What You Will Do: •Overall responsibility to create update and maintain hydraulic network system models for our gas distribution client.•Overall responsibility to examine, design and analyze the effects of various system alterations on system integrity and reliability, and propose new or altered infrastructure, such as reinforcements, as required.•Provide consultation to Planning and Design and Customer Connections when considering load additions to the system. Incorporate short term and long term customer additions targets prepared by Customer Connections and/or the Municipal Correspondence departments into the forecast analysis.•Identify changes in customer load profiles and assist in incorporating these changes into the load gathering program and network analysis design standards, thereby ensuring accuracy of the annual simulation and forecast analysis•Analyze and forecast the short and long-range distribution system operating and infrastructure requirements under varying conditions for all regions within the EGI distribution system.•Conduct network impact reports and contingency plans as required ensuring system reliability and minimizing system disruptions.•Provide consultation to other internal groups, such as Network Operations, Gas Control, AR&I, Construction, Engineering, Integrity, Key Accounts, etc.Who You Are:You have the following education & experience:•Related university Engineering degree and up to 2 years’ experience•Excellent computer skills including Microsoft Office Suite •Excellent written and oral communication skills.•Knowledge of fluid dynamics or system modeling is an asset – understanding of the Synergi software is preferred.Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Ottawa, Ontario
      • Contract
      Under the supervision of the Manager, Maintenance/ Lead Technicians; the Equipment Technician’s primary responsibility is to support and perform maintenance of all Manufacturing equipment and related equipment issues. Duties and Responsibilities•Provides support and performs maintenance for all card Manufacturing equipment & related issues. Monitor, maintain and calibrate equipment in areas such as the card assembly line, HVAC units for card line enclosure, building air compressor, in according with approved procedures•Provides support to daily card production, R&D experiments and potential future projects•Assists in the determination of root cause of failures and problems with automation equipment. Communicates effectively, verbally and in writing, to various groups affiliated with card manufacturing•Assesses multiple process variables and their interactions and then provides a reasoned, rapid response to issues revealed by test results•Troubleshooting and repair of equipment failures and operational problems•Documentation of equipment maintenance activities in maintenance logs •Performs calibration procedures•Provides support as required for equipment mechanical and control system issues•Communicates equipment-related issues with Manufacturing and Mechanical Engineering•Creates consumables used in certain automated operations•Complies with documentation requirements to ensure equipment and production records are completed accuratelyAdvantagesKey Contacts•Reports directly to Manager, Maintenance.•Perform shift duties assigned by Lead technician.•Frequent interaction with engineers, Lead technicians, and card production operatorsResponsibilities•Flexibility to work overtime and on different shifts as required•Noisy and fast-paced manufacturing environment•Ability to work independently and take appropriate action as required•Flexibility to respond to a changing and evolving environment including the ability to interact effectively with all levels of the organization •Ability to participate in process, product, equipment, and component validations and verifications (e.g. new product introductions)•Adheres to change control protocols and maintenance procedures typical of medical device manufacturing settings•Excellent oral and written communication skills •Ability to work effectively in a team environment while satisfying personal responsibilities•Ready to speak up about concerns•PhysicaloManual dexterity oAbility to distinguish between coloursoExtended periods of standing and walkingoOccasional kneeling and crouchingQualifications•[Mechanical or Electrical Technician Diploma and/or an acceptable combination of education and experience •Mechanical and/or automation aptitude toward equipment troubleshooting and root cause analysis is considered as key asset•Familiarity with operation, assembly, and maintenance of electro-mechanical equipment•Experience working in a medical device manufacturing or electronic manufacturing setting is considered an asset•Proficient knowledge of MS Office (Word, Excel, Outlook, etc.)SummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.ca Thank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Under the supervision of the Manager, Maintenance/ Lead Technicians; the Equipment Technician’s primary responsibility is to support and perform maintenance of all Manufacturing equipment and related equipment issues. Duties and Responsibilities•Provides support and performs maintenance for all card Manufacturing equipment & related issues. Monitor, maintain and calibrate equipment in areas such as the card assembly line, HVAC units for card line enclosure, building air compressor, in according with approved procedures•Provides support to daily card production, R&D experiments and potential future projects•Assists in the determination of root cause of failures and problems with automation equipment. Communicates effectively, verbally and in writing, to various groups affiliated with card manufacturing•Assesses multiple process variables and their interactions and then provides a reasoned, rapid response to issues revealed by test results•Troubleshooting and repair of equipment failures and operational problems•Documentation of equipment maintenance activities in maintenance logs •Performs calibration procedures•Provides support as required for equipment mechanical and control system issues•Communicates equipment-related issues with Manufacturing and Mechanical Engineering•Creates consumables used in certain automated operations•Complies with documentation requirements to ensure equipment and production records are completed accuratelyAdvantagesKey Contacts•Reports directly to Manager, Maintenance.•Perform shift duties assigned by Lead technician.•Frequent interaction with engineers, Lead technicians, and card production operatorsResponsibilities•Flexibility to work overtime and on different shifts as required•Noisy and fast-paced manufacturing environment•Ability to work independently and take appropriate action as required•Flexibility to respond to a changing and evolving environment including the ability to interact effectively with all levels of the organization •Ability to participate in process, product, equipment, and component validations and verifications (e.g. new product introductions)•Adheres to change control protocols and maintenance procedures typical of medical device manufacturing settings•Excellent oral and written communication skills •Ability to work effectively in a team environment while satisfying personal responsibilities•Ready to speak up about concerns•PhysicaloManual dexterity oAbility to distinguish between coloursoExtended periods of standing and walkingoOccasional kneeling and crouchingQualifications•[Mechanical or Electrical Technician Diploma and/or an acceptable combination of education and experience •Mechanical and/or automation aptitude toward equipment troubleshooting and root cause analysis is considered as key asset•Familiarity with operation, assembly, and maintenance of electro-mechanical equipment•Experience working in a medical device manufacturing or electronic manufacturing setting is considered an asset•Proficient knowledge of MS Office (Word, Excel, Outlook, etc.)SummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.ca Thank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      Responsibilities:Provides expertise in relation to engineering work associated with the design, operations, maintenance and rehabilitation of TTC's systems and components for traction power and all types of transit structures and facilities and subway and surface structures; provides engineering support and guidance to operational maintenance staff on a 24-hour basis; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO)Establishing concepts to meet identified criteria established by user groups and architectural space planningPerforming analysis and design calculation to confirm the agreed framing concepts and determine final designs which conform to all current codes and standardsProviding sketches and marked drawings for Design Draftspersons and Engineering TechnologistsReviewing structural design drawings prepared by Design Draftspersons, Engineering Technologists or Consultants for technical content, and approving/signing sameAssisting to prepare standard drawings, and performing field reviews and shop drawing reviewsRepresenting the section on development reviewsPreparing/presenting various reports and recommendations related to the workIn-depth knowledge of Civil Engineering (Structural) principles, methods and practices for the design and construction of transit facility major structuresComprehensive working knowledge of applicable codes and standards that govern structural design for buildings and bridges (i.e. National Building Code of Canada, Canadian Highway and Bridge Design Code, CSA A23.1/2/3, CSA S-16, CSA S413, etc.;)Familiarity with complex computational tools such as STAAD PRO and S-Concrete are essentialGood working knowledge of designs in plain and reinforced concrete and structural steel, as well as exposure to the applied design of pre-stressed and post-tensioned concrete, masonry and timber structuresProficient skills in MS Office applicationsAbility to produce design sketches and use CADD software is an assetSound judgement; well-developed technical, analytical, problem solving skills; good interpersonal, verbal communication and engineering report writing skillsEducation:Civil Engineering Degree Min 5 years of experience P.Eng is requiredAutoCAD and Microstation is required.Please send your resume in confidence to paul.dusome@randstad.ca Advantages· Preparing conceptual, preliminary and final design drawings for new or existing utility services, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. · Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. · Supporting the Senior Engineer as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for companies new construction and renovation projects. · Reviewing development proposals, consultant designs and Metrolinx submissions for potential impact on companies structures and facilities for compliance with regulatory and TTC Civil design requirements. · Participating in the development/update of Design Standards, specifications, and standard drawings.ResponsibilitiesResponsibilities:Provides expertise in relation to engineering work associated with the design, operations, maintenance and rehabilitation of TTC's systems and components for traction power and all types of transit structures and facilities and subway and surface structures; provides engineering support and guidance to operational maintenance staff on a 24-hour basis; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO)Establishing concepts to meet identified criteria established by user groups and architectural space planningPerforming analysis and design calculation to confirm the agreed framing concepts and determine final designs which conform to all current codes and standardsProviding sketches and marked drawings for Design Draftspersons and Engineering TechnologistsReviewing structural design drawings prepared by Design Draftspersons, Engineering Technologists or Consultants for technical content, and approving/signing sameAssisting to prepare standard drawings, and performing field reviews and shop drawing reviewsRepresenting the section on development reviewsPreparing/presenting various reports and recommendations related to the workIn-depth knowledge of Civil Engineering (Structural) principles, methods and practices for the design and construction of transit facility major structuresComprehensive working knowledge of applicable codes and standards that govern structural design for buildings and bridges (i.e. National Building Code of Canada, Canadian Highway and Bridge Design Code, CSA A23.1/2/3, CSA S-16, CSA S413, etc.;)Familiarity with complex computational tools such as STAAD PRO and S-Concrete are essentialGood working knowledge of designs in plain and reinforced concrete and structural steel, as well as exposure to the applied design of pre-stressed and post-tensioned concrete, masonry and timber structuresProficient skills in MS Office applicationsAbility to produce design sketches and use CADD software is an assetSound judgement; well-developed technical, analytical, problem solving skills; good interpersonal, verbal communication and engineering report writing skillsEducation:Civil Engineering Degree Min 5 years of experience P.Eng is requiredAutoCAD and Microstation is required.Please send your resume in confidence to paul.dusome@randstad.ca QualificationsCivil Engineering Degree Min 5 years of experience P.Eng is requiredAutoCAD and Microstation is required.SummaryResponsibilities:Provides expertise in relation to engineering work associated with the design, operations, maintenance and rehabilitation of TTC's systems and components for traction power and all types of transit structures and facilities and subway and surface structures; provides engineering support and guidance to operational maintenance staff on a 24-hour basis; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO)Establishing concepts to meet identified criteria established by user groups and architectural space planningPerforming analysis and design calculation to confirm the agreed framing concepts and determine final designs which conform to all current codes and standardsProviding sketches and marked drawings for Design Draftspersons and Engineering TechnologistsReviewing structural design drawings prepared by Design Draftspersons, Engineering Technologists or Consultants for technical content, and approving/signing sameAssisting to prepare standard drawings, and performing field reviews and shop drawing reviewsRepresenting the section on development reviewsPreparing/presenting various reports and recommendations related to the workIn-depth knowledge of Civil Engineering (Structural) principles, methods and practices for the design and construction of transit facility major structuresComprehensive working knowledge of applicable codes and standards that govern structural design for buildings and bridges (i.e. National Building Code of Canada, Canadian Highway and Bridge Design Code, CSA A23.1/2/3, CSA S-16, CSA S413, etc.;)Familiarity with complex computational tools such as STAAD PRO and S-Concrete are essentialGood working knowledge of designs in plain and reinforced concrete and structural steel, as well as exposure to the applied design of pre-stressed and post-tensioned concrete, masonry and timber structuresProficient skills in MS Office applicationsAbility to produce design sketches and use CADD software is an assetSound judgement; well-developed technical, analytical, problem solving skills; good interpersonal, verbal communication and engineering report writing skillsEducation:Civil Engineering Degree Min 5 years of experience P.Eng is requiredAutoCAD and Microstation is required.Please send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Responsibilities:Provides expertise in relation to engineering work associated with the design, operations, maintenance and rehabilitation of TTC's systems and components for traction power and all types of transit structures and facilities and subway and surface structures; provides engineering support and guidance to operational maintenance staff on a 24-hour basis; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO)Establishing concepts to meet identified criteria established by user groups and architectural space planningPerforming analysis and design calculation to confirm the agreed framing concepts and determine final designs which conform to all current codes and standardsProviding sketches and marked drawings for Design Draftspersons and Engineering TechnologistsReviewing structural design drawings prepared by Design Draftspersons, Engineering Technologists or Consultants for technical content, and approving/signing sameAssisting to prepare standard drawings, and performing field reviews and shop drawing reviewsRepresenting the section on development reviewsPreparing/presenting various reports and recommendations related to the workIn-depth knowledge of Civil Engineering (Structural) principles, methods and practices for the design and construction of transit facility major structuresComprehensive working knowledge of applicable codes and standards that govern structural design for buildings and bridges (i.e. National Building Code of Canada, Canadian Highway and Bridge Design Code, CSA A23.1/2/3, CSA S-16, CSA S413, etc.;)Familiarity with complex computational tools such as STAAD PRO and S-Concrete are essentialGood working knowledge of designs in plain and reinforced concrete and structural steel, as well as exposure to the applied design of pre-stressed and post-tensioned concrete, masonry and timber structuresProficient skills in MS Office applicationsAbility to produce design sketches and use CADD software is an assetSound judgement; well-developed technical, analytical, problem solving skills; good interpersonal, verbal communication and engineering report writing skillsEducation:Civil Engineering Degree Min 5 years of experience P.Eng is requiredAutoCAD and Microstation is required.Please send your resume in confidence to paul.dusome@randstad.ca Advantages· Preparing conceptual, preliminary and final design drawings for new or existing utility services, traffic staging, paving, drainage, fencing and hoarding for roadways, parking lots, bus facilities, and transit right of ways. · Checking the work of the Design Draftsperson for conformance with design inputs, and coordinating the inclusion of working drawings and specifications to contract documents. · Supporting the Senior Engineer as required with public utility authorities/City of Toronto to obtain approvals, permits, etc., for companies new construction and renovation projects. · Reviewing development proposals, consultant designs and Metrolinx submissions for potential impact on companies structures and facilities for compliance with regulatory and TTC Civil design requirements. · Participating in the development/update of Design Standards, specifications, and standard drawings.ResponsibilitiesResponsibilities:Provides expertise in relation to engineering work associated with the design, operations, maintenance and rehabilitation of TTC's systems and components for traction power and all types of transit structures and facilities and subway and surface structures; provides engineering support and guidance to operational maintenance staff on a 24-hour basis; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO)Establishing concepts to meet identified criteria established by user groups and architectural space planningPerforming analysis and design calculation to confirm the agreed framing concepts and determine final designs which conform to all current codes and standardsProviding sketches and marked drawings for Design Draftspersons and Engineering TechnologistsReviewing structural design drawings prepared by Design Draftspersons, Engineering Technologists or Consultants for technical content, and approving/signing sameAssisting to prepare standard drawings, and performing field reviews and shop drawing reviewsRepresenting the section on development reviewsPreparing/presenting various reports and recommendations related to the workIn-depth knowledge of Civil Engineering (Structural) principles, methods and practices for the design and construction of transit facility major structuresComprehensive working knowledge of applicable codes and standards that govern structural design for buildings and bridges (i.e. National Building Code of Canada, Canadian Highway and Bridge Design Code, CSA A23.1/2/3, CSA S-16, CSA S413, etc.;)Familiarity with complex computational tools such as STAAD PRO and S-Concrete are essentialGood working knowledge of designs in plain and reinforced concrete and structural steel, as well as exposure to the applied design of pre-stressed and post-tensioned concrete, masonry and timber structuresProficient skills in MS Office applicationsAbility to produce design sketches and use CADD software is an assetSound judgement; well-developed technical, analytical, problem solving skills; good interpersonal, verbal communication and engineering report writing skillsEducation:Civil Engineering Degree Min 5 years of experience P.Eng is requiredAutoCAD and Microstation is required.Please send your resume in confidence to paul.dusome@randstad.ca QualificationsCivil Engineering Degree Min 5 years of experience P.Eng is requiredAutoCAD and Microstation is required.SummaryResponsibilities:Provides expertise in relation to engineering work associated with the design, operations, maintenance and rehabilitation of TTC's systems and components for traction power and all types of transit structures and facilities and subway and surface structures; provides engineering support and guidance to operational maintenance staff on a 24-hour basis; takes professional responsibility for engineering work as required by the Professional Engineers of Ontario (PEO)Establishing concepts to meet identified criteria established by user groups and architectural space planningPerforming analysis and design calculation to confirm the agreed framing concepts and determine final designs which conform to all current codes and standardsProviding sketches and marked drawings for Design Draftspersons and Engineering TechnologistsReviewing structural design drawings prepared by Design Draftspersons, Engineering Technologists or Consultants for technical content, and approving/signing sameAssisting to prepare standard drawings, and performing field reviews and shop drawing reviewsRepresenting the section on development reviewsPreparing/presenting various reports and recommendations related to the workIn-depth knowledge of Civil Engineering (Structural) principles, methods and practices for the design and construction of transit facility major structuresComprehensive working knowledge of applicable codes and standards that govern structural design for buildings and bridges (i.e. National Building Code of Canada, Canadian Highway and Bridge Design Code, CSA A23.1/2/3, CSA S-16, CSA S413, etc.;)Familiarity with complex computational tools such as STAAD PRO and S-Concrete are essentialGood working knowledge of designs in plain and reinforced concrete and structural steel, as well as exposure to the applied design of pre-stressed and post-tensioned concrete, masonry and timber structuresProficient skills in MS Office applicationsAbility to produce design sketches and use CADD software is an assetSound judgement; well-developed technical, analytical, problem solving skills; good interpersonal, verbal communication and engineering report writing skillsEducation:Civil Engineering Degree Min 5 years of experience P.Eng is requiredAutoCAD and Microstation is required.Please send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Saint Mary's, Ontario
      • Permanent
      Our client in the London area is looking for a Roll Forming Engineer to join their team! Do you have experience creating and developing procedures in an automotive manufacturing industry? Do you have knowledge of induction brazing? Are you passionate about reducing downtime and scrap? This role is for you! Advantages- Competitive compensation- Competitive benefits- RRSP match- Fitness reimbursement- BonusCompany cell phone and laptopResponsibilities- Measuring of mill tooling, inspecting tooling, tooling geometry development- Create, document, develop and implement procedures required to manufacture single and double wall tube- Review of daily scrap and creating plans to reduce downtime and scrap- Develop, evaluate, improve and document new manufacturing processes- Develop and implement process control techniques and procedures into manufacturing environments- Analyze manufacturing process flows continually for the enhancement of quality, cost reduction and throughput- Develop, coordinate, and implement technical training for employees- Design and develop manufacturing processes for enhancements, product changes, and new products, and related fixtures and tooling that are consistent with zero defect level and low product costQualifications- Engineering Degree or Diploma- 3-5 years automotive manufacturing experience- Knowledge of induction brazing processes- Previous experience creating, documenting developing and implementing procedures required to manufacture single and double wall tubeSummaryApply online today! Or send your resume to Lisa Medeiros at Lisa.Medeiros@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our client in the London area is looking for a Roll Forming Engineer to join their team! Do you have experience creating and developing procedures in an automotive manufacturing industry? Do you have knowledge of induction brazing? Are you passionate about reducing downtime and scrap? This role is for you! Advantages- Competitive compensation- Competitive benefits- RRSP match- Fitness reimbursement- BonusCompany cell phone and laptopResponsibilities- Measuring of mill tooling, inspecting tooling, tooling geometry development- Create, document, develop and implement procedures required to manufacture single and double wall tube- Review of daily scrap and creating plans to reduce downtime and scrap- Develop, evaluate, improve and document new manufacturing processes- Develop and implement process control techniques and procedures into manufacturing environments- Analyze manufacturing process flows continually for the enhancement of quality, cost reduction and throughput- Develop, coordinate, and implement technical training for employees- Design and develop manufacturing processes for enhancements, product changes, and new products, and related fixtures and tooling that are consistent with zero defect level and low product costQualifications- Engineering Degree or Diploma- 3-5 years automotive manufacturing experience- Knowledge of induction brazing processes- Previous experience creating, documenting developing and implementing procedures required to manufacture single and double wall tubeSummaryApply online today! Or send your resume to Lisa Medeiros at Lisa.Medeiros@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Permanent
      Are you looking for a challenging role as a Shift Engineer where you can join an industry leader?Do you enjoy working independently and having responsibility?If so, this role may be for you!Reporting to the Maintenance Supervisor, this position is accountable for contributing to various Operating Engineering and Maintenance tasks at the division. This position will maintain the life of equipment, minimize downtime, and ensure the safe and efficient operations of the plant. Team members are required with the following qualifications and will perform the duties listed below.Location: North YorkAdvantages- Rotating Continental shift- 1 Float day (paid per year)- 3 weeks (120 hours) vacation/yr.- Benefits start after 3 months of employment (health, dental, vision plan- employer paid premiums), co. STD plan, LTD- employee pays the premiums- Participation in Company Group RRSP program after 3 months. Company match to DPSP plan.- Paid sick days (within acceptable range)- 1 Volunteer Day (paid)- Training & Development opportunities as well.Qualifications: Must have: a valid TSSA 3rd Class Operating Engineer Certificate Industrial Millwright and/or Electrician License an asset.Well experienced to maintain and operate Steam Boilers, Air Compressors, Ammonia RefrigerationProven ability to maintain and repair various packaging and processing equipmentStrong troubleshooting skills and a positive, solutions-oriented team playerDedicated to safety and process excellenceA strong background in HACCP and GMP’s would be an assetMinimum 3 years maintenance experience in a manufacturing environment, preferably food industry, dairy industry would be an assetMust display excellent sanitary habits and possess knowledge of HACCPStrong preventative maintenance and troubleshooting abilitySolid knowledge of high-speed filling and packaging lines and PLCs Knowledge of GMPsFamiliar with continuous improvement processes and methodologies considered an assetGood communication skills, including written and verbalAbility to work independently and in a team environmentMust be flexible in terms of shift work and perform other duties as requiredPhysically capable of performing the demands of the jobComputer skills would be an assetResponsibilitiesMaintain and operate boilers, air compressors, ammonia refrigeration, water chillers, cooling tower, air compressors, and building facilitiesTroubleshoot and maintain processing equipment such as UHT, VTIS, Pasteurizer, Silos, AST tanks, valves and pumpsMaintain and troubleshoot bag and carton fillers and high-speed packaging equipmentResponsible to maintain all mechanical and electrical systems, all machinery at the facility Coordinate with Production, Maintenance and outside contractors and ensure that work is completed in a safe manner that complies with all necessary manufacturing codes, regulations and standards i.e. H&S, GMP’s, HACCP, WHMIS, MSDS etc.Communicate daily Engineering Activities with Chief Engineer and update all daily engineering logsImprove and maintain existing PM systemsEnsure that required parts are ordered Identify opportunities and make recommendations to continuously improve maintenance operations and efficienciesFood Safety & Quality responsibility as outlined in SOPs & other training materials provided and accurate record keepingAttend prescribed courses and training as requiredOther projects as assigned by Plant Management.Working Environment:Regular interruptions and exposure to noise. Occasional exposure to dust, extreme temperatures, odour, humidity, dry conditions, chemical substances, heights, hazardous machines and moving objects. Physical Demands:Standing, walking, and sitting for a considerable length of time. Crouching, working in confined spaces, climbing stairs and working in awkward positions at moderate lengths of time. Regular climbing of stairs (there are 22 stairs from the production floor to the lunch and rest rooms, as well as the office areas).QualificationsMust have: a valid TSSA 3rd Class Operating Engineer Certificate Industrial Millwright and/or Electrician License an asset.Well experienced to maintain and operate Steam Boilers, Air Compressors, Ammonia RefrigerationProven ability to maintain and repair various packaging and processing equipmentStrong troubleshooting skills and a positive, solutions-oriented team playerDedicated to safety and process excellenceA strong background in HACCP and GMP’s would be an assetMinimum 3 years maintenance experience in a manufacturing environment, preferably food industry, dairy industry would be an assetMust display excellent sanitary habits and possess knowledge of HACCPStrong preventative maintenance and troubleshooting abilitySolid knowledge of high-speed filling and packaging lines and PLCs Knowledge of GMPsFamiliar with continuous improvement processes and methodologies considered an assetGood communication skills, including written and verbalAbility to work independently and in a team environmentMust be flexible in terms of shift work and perform other duties as requiredPhysically capable of performing the demands of the jobComputer skills would be an assetSummaryEmail resume to Mina Khalil at mina.khalil@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you looking for a challenging role as a Shift Engineer where you can join an industry leader?Do you enjoy working independently and having responsibility?If so, this role may be for you!Reporting to the Maintenance Supervisor, this position is accountable for contributing to various Operating Engineering and Maintenance tasks at the division. This position will maintain the life of equipment, minimize downtime, and ensure the safe and efficient operations of the plant. Team members are required with the following qualifications and will perform the duties listed below.Location: North YorkAdvantages- Rotating Continental shift- 1 Float day (paid per year)- 3 weeks (120 hours) vacation/yr.- Benefits start after 3 months of employment (health, dental, vision plan- employer paid premiums), co. STD plan, LTD- employee pays the premiums- Participation in Company Group RRSP program after 3 months. Company match to DPSP plan.- Paid sick days (within acceptable range)- 1 Volunteer Day (paid)- Training & Development opportunities as well.Qualifications: Must have: a valid TSSA 3rd Class Operating Engineer Certificate Industrial Millwright and/or Electrician License an asset.Well experienced to maintain and operate Steam Boilers, Air Compressors, Ammonia RefrigerationProven ability to maintain and repair various packaging and processing equipmentStrong troubleshooting skills and a positive, solutions-oriented team playerDedicated to safety and process excellenceA strong background in HACCP and GMP’s would be an assetMinimum 3 years maintenance experience in a manufacturing environment, preferably food industry, dairy industry would be an assetMust display excellent sanitary habits and possess knowledge of HACCPStrong preventative maintenance and troubleshooting abilitySolid knowledge of high-speed filling and packaging lines and PLCs Knowledge of GMPsFamiliar with continuous improvement processes and methodologies considered an assetGood communication skills, including written and verbalAbility to work independently and in a team environmentMust be flexible in terms of shift work and perform other duties as requiredPhysically capable of performing the demands of the jobComputer skills would be an assetResponsibilitiesMaintain and operate boilers, air compressors, ammonia refrigeration, water chillers, cooling tower, air compressors, and building facilitiesTroubleshoot and maintain processing equipment such as UHT, VTIS, Pasteurizer, Silos, AST tanks, valves and pumpsMaintain and troubleshoot bag and carton fillers and high-speed packaging equipmentResponsible to maintain all mechanical and electrical systems, all machinery at the facility Coordinate with Production, Maintenance and outside contractors and ensure that work is completed in a safe manner that complies with all necessary manufacturing codes, regulations and standards i.e. H&S, GMP’s, HACCP, WHMIS, MSDS etc.Communicate daily Engineering Activities with Chief Engineer and update all daily engineering logsImprove and maintain existing PM systemsEnsure that required parts are ordered Identify opportunities and make recommendations to continuously improve maintenance operations and efficienciesFood Safety & Quality responsibility as outlined in SOPs & other training materials provided and accurate record keepingAttend prescribed courses and training as requiredOther projects as assigned by Plant Management.Working Environment:Regular interruptions and exposure to noise. Occasional exposure to dust, extreme temperatures, odour, humidity, dry conditions, chemical substances, heights, hazardous machines and moving objects. Physical Demands:Standing, walking, and sitting for a considerable length of time. Crouching, working in confined spaces, climbing stairs and working in awkward positions at moderate lengths of time. Regular climbing of stairs (there are 22 stairs from the production floor to the lunch and rest rooms, as well as the office areas).QualificationsMust have: a valid TSSA 3rd Class Operating Engineer Certificate Industrial Millwright and/or Electrician License an asset.Well experienced to maintain and operate Steam Boilers, Air Compressors, Ammonia RefrigerationProven ability to maintain and repair various packaging and processing equipmentStrong troubleshooting skills and a positive, solutions-oriented team playerDedicated to safety and process excellenceA strong background in HACCP and GMP’s would be an assetMinimum 3 years maintenance experience in a manufacturing environment, preferably food industry, dairy industry would be an assetMust display excellent sanitary habits and possess knowledge of HACCPStrong preventative maintenance and troubleshooting abilitySolid knowledge of high-speed filling and packaging lines and PLCs Knowledge of GMPsFamiliar with continuous improvement processes and methodologies considered an assetGood communication skills, including written and verbalAbility to work independently and in a team environmentMust be flexible in terms of shift work and perform other duties as requiredPhysically capable of performing the demands of the jobComputer skills would be an assetSummaryEmail resume to Mina Khalil at mina.khalil@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      EIT CET Utilization EngineeringDescription:Responsible for establishing policies, processes, procedures for Engineering Utilization focusing on best practices for safe installation and operation of gas piping and appliance work downstream of the gas utility customer’s meter and includes references to CSA B149.1Responsibilities• Write policies, procedures, processes using established templates, and by facilitating feedback meetings with associated stakeholders.• Follow program controls and attain approvals from all associated stakeholders prior to submitting to Content Management for Publishing• Using project management principles, evaluate and prioritize activities required to meet deliverables and milestone dates• Track, monitor and communicate document progress updates against the project plan.Scope• Processes• Procedures• Engineering Approval• Project Management• ControlsContacts/Working Relationships• Engineering Internal Departments• Field Personnel & External Contractors• Content Management Representatives• Operations Governance Representatives• Technical TrainersRequired:• EIT or CET Degree (preferably Mechanical);• Experience in the development of documentation including field work process and procedures• Technical experience related to residential/commercial natural gas pipe installation and gas-fired appliances• CSA B149.1 associated experience, policy and procedures coupled with an understanding of applicable regulatory codes and safety matters.• Able to independently and effectively manage projects with varying complexities requiring the application of engineering principles and business components.• Strong communication, customer service, inter-personal, organizational, conflict resolution and project management skills.• Able to manage and prioritize multiple deliverables at one time.Preferred:• PMP designation or associated experience is a plusPlease submit your resume in confidence to paul.dusome@randstad.caAdvantagesPreferred:• PMP designation or associated experience is a plus• EIT or CET Degree (preferably Mechanical);ResponsibilitiesEIT CET Utilization EngineeringDescription:Responsible for establishing policies, processes, procedures for Engineering Utilization focusing on best practices for safe installation and operation of gas piping and appliance work downstream of the gas utility customer’s meter and includes references to CSA B149.1Responsibilities• Write policies, procedures, processes using established templates, and by facilitating feedback meetings with associated stakeholders.• Follow program controls and attain approvals from all associated stakeholders prior to submitting to Content Management for Publishing• Using project management principles, evaluate and prioritize activities required to meet deliverables and milestone dates• Track, monitor and communicate document progress updates against the project plan.Scope• Processes• Procedures• Engineering Approval• Project Management• ControlsContacts/Working Relationships• Engineering Internal Departments• Field Personnel & External Contractors• Content Management Representatives• Operations Governance Representatives• Technical TrainersRequired:• EIT or CET Degree (preferably Mechanical);• Experience in the development of documentation including field work process and procedures• Technical experience related to residential/commercial natural gas pipe installation and gas-fired appliances• CSA B149.1 associated experience, policy and procedures coupled with an understanding of applicable regulatory codes and safety matters.• Able to independently and effectively manage projects with varying complexities requiring the application of engineering principles and business components.• Strong communication, customer service, inter-personal, organizational, conflict resolution and project management skills.• Able to manage and prioritize multiple deliverables at one time.Preferred:• PMP designation or associated experience is a plusPlease submit your resume in confidence to paul.dusome@randstad.caQualificationsRequired:• EIT or CET Degree (preferably Mechanical);• Experience in the development of documentation including field work process and procedures• Technical experience related to residential/commercial natural gas pipe installation and gas-fired appliances• CSA B149.1 associated experience, policy and procedures coupled with an understanding of applicable regulatory codes and safety matters.• Able to independently and effectively manage projects with varying complexities requiring the application of engineering principles and business components.• Strong communication, customer service, inter-personal, organizational, conflict resolution and project management skills.• Able to manage and prioritize multiple deliverables at one time.SummaryEIT CET Utilization EngineeringDescription:Responsible for establishing policies, processes, procedures for Engineering Utilization focusing on best practices for safe installation and operation of gas piping and appliance work downstream of the gas utility customer’s meter and includes references to CSA B149.1Responsibilities• Write policies, procedures, processes using established templates, and by facilitating feedback meetings with associated stakeholders.• Follow program controls and attain approvals from all associated stakeholders prior to submitting to Content Management for Publishing• Using project management principles, evaluate and prioritize activities required to meet deliverables and milestone dates• Track, monitor and communicate document progress updates against the project plan.Scope• Processes• Procedures• Engineering Approval• Project Management• ControlsContacts/Working Relationships• Engineering Internal Departments• Field Personnel & External Contractors• Content Management Representatives• Operations Governance Representatives• Technical TrainersRequired:• EIT or CET Degree (preferably Mechanical);• Experience in the development of documentation including field work process and procedures• Technical experience related to residential/commercial natural gas pipe installation and gas-fired appliances• CSA B149.1 associated experience, policy and procedures coupled with an understanding of applicable regulatory codes and safety matters.• Able to independently and effectively manage projects with varying complexities requiring the application of engineering principles and business components.• Strong communication, customer service, inter-personal, organizational, conflict resolution and project management skills.• Able to manage and prioritize multiple deliverables at one time.Preferred:• PMP designation or associated experience is a plusPlease submit your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      EIT CET Utilization EngineeringDescription:Responsible for establishing policies, processes, procedures for Engineering Utilization focusing on best practices for safe installation and operation of gas piping and appliance work downstream of the gas utility customer’s meter and includes references to CSA B149.1Responsibilities• Write policies, procedures, processes using established templates, and by facilitating feedback meetings with associated stakeholders.• Follow program controls and attain approvals from all associated stakeholders prior to submitting to Content Management for Publishing• Using project management principles, evaluate and prioritize activities required to meet deliverables and milestone dates• Track, monitor and communicate document progress updates against the project plan.Scope• Processes• Procedures• Engineering Approval• Project Management• ControlsContacts/Working Relationships• Engineering Internal Departments• Field Personnel & External Contractors• Content Management Representatives• Operations Governance Representatives• Technical TrainersRequired:• EIT or CET Degree (preferably Mechanical);• Experience in the development of documentation including field work process and procedures• Technical experience related to residential/commercial natural gas pipe installation and gas-fired appliances• CSA B149.1 associated experience, policy and procedures coupled with an understanding of applicable regulatory codes and safety matters.• Able to independently and effectively manage projects with varying complexities requiring the application of engineering principles and business components.• Strong communication, customer service, inter-personal, organizational, conflict resolution and project management skills.• Able to manage and prioritize multiple deliverables at one time.Preferred:• PMP designation or associated experience is a plusPlease submit your resume in confidence to paul.dusome@randstad.caAdvantagesPreferred:• PMP designation or associated experience is a plus• EIT or CET Degree (preferably Mechanical);ResponsibilitiesEIT CET Utilization EngineeringDescription:Responsible for establishing policies, processes, procedures for Engineering Utilization focusing on best practices for safe installation and operation of gas piping and appliance work downstream of the gas utility customer’s meter and includes references to CSA B149.1Responsibilities• Write policies, procedures, processes using established templates, and by facilitating feedback meetings with associated stakeholders.• Follow program controls and attain approvals from all associated stakeholders prior to submitting to Content Management for Publishing• Using project management principles, evaluate and prioritize activities required to meet deliverables and milestone dates• Track, monitor and communicate document progress updates against the project plan.Scope• Processes• Procedures• Engineering Approval• Project Management• ControlsContacts/Working Relationships• Engineering Internal Departments• Field Personnel & External Contractors• Content Management Representatives• Operations Governance Representatives• Technical TrainersRequired:• EIT or CET Degree (preferably Mechanical);• Experience in the development of documentation including field work process and procedures• Technical experience related to residential/commercial natural gas pipe installation and gas-fired appliances• CSA B149.1 associated experience, policy and procedures coupled with an understanding of applicable regulatory codes and safety matters.• Able to independently and effectively manage projects with varying complexities requiring the application of engineering principles and business components.• Strong communication, customer service, inter-personal, organizational, conflict resolution and project management skills.• Able to manage and prioritize multiple deliverables at one time.Preferred:• PMP designation or associated experience is a plusPlease submit your resume in confidence to paul.dusome@randstad.caQualificationsRequired:• EIT or CET Degree (preferably Mechanical);• Experience in the development of documentation including field work process and procedures• Technical experience related to residential/commercial natural gas pipe installation and gas-fired appliances• CSA B149.1 associated experience, policy and procedures coupled with an understanding of applicable regulatory codes and safety matters.• Able to independently and effectively manage projects with varying complexities requiring the application of engineering principles and business components.• Strong communication, customer service, inter-personal, organizational, conflict resolution and project management skills.• Able to manage and prioritize multiple deliverables at one time.SummaryEIT CET Utilization EngineeringDescription:Responsible for establishing policies, processes, procedures for Engineering Utilization focusing on best practices for safe installation and operation of gas piping and appliance work downstream of the gas utility customer’s meter and includes references to CSA B149.1Responsibilities• Write policies, procedures, processes using established templates, and by facilitating feedback meetings with associated stakeholders.• Follow program controls and attain approvals from all associated stakeholders prior to submitting to Content Management for Publishing• Using project management principles, evaluate and prioritize activities required to meet deliverables and milestone dates• Track, monitor and communicate document progress updates against the project plan.Scope• Processes• Procedures• Engineering Approval• Project Management• ControlsContacts/Working Relationships• Engineering Internal Departments• Field Personnel & External Contractors• Content Management Representatives• Operations Governance Representatives• Technical TrainersRequired:• EIT or CET Degree (preferably Mechanical);• Experience in the development of documentation including field work process and procedures• Technical experience related to residential/commercial natural gas pipe installation and gas-fired appliances• CSA B149.1 associated experience, policy and procedures coupled with an understanding of applicable regulatory codes and safety matters.• Able to independently and effectively manage projects with varying complexities requiring the application of engineering principles and business components.• Strong communication, customer service, inter-personal, organizational, conflict resolution and project management skills.• Able to manage and prioritize multiple deliverables at one time.Preferred:• PMP designation or associated experience is a plusPlease submit your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      Duties and Responsibilities:Provide graphic design and technical support related to signage work required for capital projects.Prepare detailed designs and contract documentation for graphic projects as required based on Signage standards, Directive Drawings and Master Specifications. Reviewing and checking designs, drawings, specifications, costs and work completion estimates for accuracy, technical detail, schedule compliance, code compliance and compliance with clients requirements and standards.Assisting in liaising with advisory and technical review committees.Review shop drawings and conducting field reviews. Participating in signage development stakeholder meetings as required. Review and commenting on the design and technical documents prepared by consultants for developers.Skills/Knowledge:Requires comprehensive of Graphic Design principles and practices with specific knowledge of transit systems.Familiar with relevant construction related standards, codes, statues and their application.Conversant with and having experience using the current version of Adobe Photoshop, Adobe Acrobat (PDF Creator) Corel DRaw, Sketch UP, Microstation V8i , MS Office Suite and Adobe Illustrator.Relevant Diploma, combined with 10 years of experience in the Wayfinding and signage industry.Please send your resume in confidence to paul.dusome@randstad.ca AdvantagesReviewing and checking designs, drawings, specifications, costs and work completion estimates for accuracy, technical detail, schedule compliance, code compliance and compliance with clients requirements and standards.Assisting in liaising with advisory and technical review committees.Review shop drawings and conducting field reviews. Participating in signage development stakeholder meetings as required. ResponsibilitiesDuties and Responsibilities:Provide graphic design and technical support related to signage work required for capital projects.Prepare detailed designs and contract documentation for graphic projects as required based on Signage standards, Directive Drawings and Master Specifications. Reviewing and checking designs, drawings, specifications, costs and work completion estimates for accuracy, technical detail, schedule compliance, code compliance and compliance with clients requirements and standards.Assisting in liaising with advisory and technical review committees.Review shop drawings and conducting field reviews. Participating in signage development stakeholder meetings as required. Review and commenting on the design and technical documents prepared by consultants for developers.Skills/Knowledge:Requires comprehensive of Graphic Design principles and practices with specific knowledge of transit systems.Familiar with relevant construction related standards, codes, statues and their application.Conversant with and having experience using the current version of Adobe Photoshop, Adobe Acrobat (PDF Creator) Corel DRaw, Sketch UP, Microstation V8i , MS Office Suite and Adobe Illustrator.Relevant Diploma, combined with 10 years of experience in the Wayfinding and signage industry.Please send your resume in confidence to paul.dusome@randstad.ca QualificationsRelevant Diploma, combined with 10 years of experience in the Wayfinding and signage industry.SummaryDuties and Responsibilities:Provide graphic design and technical support related to signage work required for capital projects.Prepare detailed designs and contract documentation for graphic projects as required based on Signage standards, Directive Drawings and Master Specifications. Reviewing and checking designs, drawings, specifications, costs and work completion estimates for accuracy, technical detail, schedule compliance, code compliance and compliance with clients requirements and standards.Assisting in liaising with advisory and technical review committees.Review shop drawings and conducting field reviews. Participating in signage development stakeholder meetings as required. Review and commenting on the design and technical documents prepared by consultants for developers.Skills/Knowledge:Requires comprehensive of Graphic Design principles and practices with specific knowledge of transit systems.Familiar with relevant construction related standards, codes, statues and their application.Conversant with and having experience using the current version of Adobe Photoshop, Adobe Acrobat (PDF Creator) Corel DRaw, Sketch UP, Microstation V8i , MS Office Suite and Adobe Illustrator.Relevant Diploma, combined with 10 years of experience in the Wayfinding and signage industry.Please send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Duties and Responsibilities:Provide graphic design and technical support related to signage work required for capital projects.Prepare detailed designs and contract documentation for graphic projects as required based on Signage standards, Directive Drawings and Master Specifications. Reviewing and checking designs, drawings, specifications, costs and work completion estimates for accuracy, technical detail, schedule compliance, code compliance and compliance with clients requirements and standards.Assisting in liaising with advisory and technical review committees.Review shop drawings and conducting field reviews. Participating in signage development stakeholder meetings as required. Review and commenting on the design and technical documents prepared by consultants for developers.Skills/Knowledge:Requires comprehensive of Graphic Design principles and practices with specific knowledge of transit systems.Familiar with relevant construction related standards, codes, statues and their application.Conversant with and having experience using the current version of Adobe Photoshop, Adobe Acrobat (PDF Creator) Corel DRaw, Sketch UP, Microstation V8i , MS Office Suite and Adobe Illustrator.Relevant Diploma, combined with 10 years of experience in the Wayfinding and signage industry.Please send your resume in confidence to paul.dusome@randstad.ca AdvantagesReviewing and checking designs, drawings, specifications, costs and work completion estimates for accuracy, technical detail, schedule compliance, code compliance and compliance with clients requirements and standards.Assisting in liaising with advisory and technical review committees.Review shop drawings and conducting field reviews. Participating in signage development stakeholder meetings as required. ResponsibilitiesDuties and Responsibilities:Provide graphic design and technical support related to signage work required for capital projects.Prepare detailed designs and contract documentation for graphic projects as required based on Signage standards, Directive Drawings and Master Specifications. Reviewing and checking designs, drawings, specifications, costs and work completion estimates for accuracy, technical detail, schedule compliance, code compliance and compliance with clients requirements and standards.Assisting in liaising with advisory and technical review committees.Review shop drawings and conducting field reviews. Participating in signage development stakeholder meetings as required. Review and commenting on the design and technical documents prepared by consultants for developers.Skills/Knowledge:Requires comprehensive of Graphic Design principles and practices with specific knowledge of transit systems.Familiar with relevant construction related standards, codes, statues and their application.Conversant with and having experience using the current version of Adobe Photoshop, Adobe Acrobat (PDF Creator) Corel DRaw, Sketch UP, Microstation V8i , MS Office Suite and Adobe Illustrator.Relevant Diploma, combined with 10 years of experience in the Wayfinding and signage industry.Please send your resume in confidence to paul.dusome@randstad.ca QualificationsRelevant Diploma, combined with 10 years of experience in the Wayfinding and signage industry.SummaryDuties and Responsibilities:Provide graphic design and technical support related to signage work required for capital projects.Prepare detailed designs and contract documentation for graphic projects as required based on Signage standards, Directive Drawings and Master Specifications. Reviewing and checking designs, drawings, specifications, costs and work completion estimates for accuracy, technical detail, schedule compliance, code compliance and compliance with clients requirements and standards.Assisting in liaising with advisory and technical review committees.Review shop drawings and conducting field reviews. Participating in signage development stakeholder meetings as required. Review and commenting on the design and technical documents prepared by consultants for developers.Skills/Knowledge:Requires comprehensive of Graphic Design principles and practices with specific knowledge of transit systems.Familiar with relevant construction related standards, codes, statues and their application.Conversant with and having experience using the current version of Adobe Photoshop, Adobe Acrobat (PDF Creator) Corel DRaw, Sketch UP, Microstation V8i , MS Office Suite and Adobe Illustrator.Relevant Diploma, combined with 10 years of experience in the Wayfinding and signage industry.Please send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Concord, Ontario
      • Permanent
      Our client in the Vaughan area has partnered with Randstad Engineering in their search for a Sr CNC Programmer. Job Title: Senior CNC Programmer / Operator - Type - Lathe Programming using MastercamIndustry - Automotive Parts Manufacturer Shift - Day ShiftFull Time permanentIf you are interested in this opportunity, apply today online or send your resume directly to ankur.vaid@randstad.ca. Only qualified candidates will be contacted.JOB DESCRIPTIONManufacture tooling and prototype components as directed by blueprint or instructions using CNC equipmentVerify that tooling and prototype components are to blueprint specificationsTakes all required safety precautions when working; advises people nearby of sameManufacture advanced/complex tooling and prototype componentsQUALIFICATIONSMinimum seven years experience programming, and operating CNC Lathes. using MastercamCAD/CAM designing (Delcam and SolidWorks software) experience is an asset.Must be able to do own set-ups and read blueprintsMust have excellent mathematical skillsMust be able to work independentlyAble to fulfill physical requirements as requiredAdvantagesThis is a permanent opportunity, with a competitive compensation package in a thriving environment.ResponsibilitiesJOB DESCRIPTIONManufacture tooling and prototype components as directed by blueprint or instructions using CNC equipmentVerify that tooling and prototype components are to blueprint specificationsTakes all required safety precautions when working; advises people nearby of sameManufacture advanced/complex tooling and prototype componentsQualificationsQUALIFICATIONSMinimum seven years experience programming, and operating CNC Lathes. using MastercamCAD/CAM designing (Delcam and SolidWorks software) experience is an asset.Must be able to do own set-ups and read blueprintsMust have excellent mathematical skillsMust be able to work independentlyAble to fulfill physical requirements as requiredSummaryIf you are interested in this opportunity, apply today online or send your resume directly to ankur.vaid@randstad.ca. Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our client in the Vaughan area has partnered with Randstad Engineering in their search for a Sr CNC Programmer. Job Title: Senior CNC Programmer / Operator - Type - Lathe Programming using MastercamIndustry - Automotive Parts Manufacturer Shift - Day ShiftFull Time permanentIf you are interested in this opportunity, apply today online or send your resume directly to ankur.vaid@randstad.ca. Only qualified candidates will be contacted.JOB DESCRIPTIONManufacture tooling and prototype components as directed by blueprint or instructions using CNC equipmentVerify that tooling and prototype components are to blueprint specificationsTakes all required safety precautions when working; advises people nearby of sameManufacture advanced/complex tooling and prototype componentsQUALIFICATIONSMinimum seven years experience programming, and operating CNC Lathes. using MastercamCAD/CAM designing (Delcam and SolidWorks software) experience is an asset.Must be able to do own set-ups and read blueprintsMust have excellent mathematical skillsMust be able to work independentlyAble to fulfill physical requirements as requiredAdvantagesThis is a permanent opportunity, with a competitive compensation package in a thriving environment.ResponsibilitiesJOB DESCRIPTIONManufacture tooling and prototype components as directed by blueprint or instructions using CNC equipmentVerify that tooling and prototype components are to blueprint specificationsTakes all required safety precautions when working; advises people nearby of sameManufacture advanced/complex tooling and prototype componentsQualificationsQUALIFICATIONSMinimum seven years experience programming, and operating CNC Lathes. using MastercamCAD/CAM designing (Delcam and SolidWorks software) experience is an asset.Must be able to do own set-ups and read blueprintsMust have excellent mathematical skillsMust be able to work independentlyAble to fulfill physical requirements as requiredSummaryIf you are interested in this opportunity, apply today online or send your resume directly to ankur.vaid@randstad.ca. Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Permanent
      Our client in Toronto is seeking an experienced Construction Project Manager to plan and oversee a wide variety of pool construction projects from beginning to end.In this role, you will be hiring subcontractors and working with engineers and architects as needed and keeping track of an inventory of equipment and materials.AdvantagesThis is a permanent year-round opportunity with a reputable Pool & Landscaping organization, that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, commission incentives, RRSP Matching Program, Benefits, Vacation and Flexibility.Responsibilities•Oversee construction projects from beginning to end•Prepare reports regarding job status•Train and mentor construction workers and construction laborers depending on the size of the project•Collaborate with subcontractors, engineers, architects, and key team members of the project team•Negotiate with external vendors on contract agreements•Obtain the appropriate permits and licenses from authorities for construction sites•Manage the budget and estimate costs•Determine the necessary equipment, materials, and manpower needed•Keep track of inventory, tools and equipment•Ensure supplies and equipment are ordered and delivered according to schedule•Allocate and manage resources to ensure that they are available when they are needed throughout the construction projects•Keep all stakeholders aware of the progress on projects and prepare progress reports regularly•Handle any environmental or local community issues that may come up during a projectQualifications•Extensive previous work experience managing budgets for construction projects•Pool construction knowledge and experience•PMP or an equivalent certification would be considered an asset•BSc/BA degree in Architecture, Building Science, Engineering, Construction Management, or another related fieldSummaryIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our client in Toronto is seeking an experienced Construction Project Manager to plan and oversee a wide variety of pool construction projects from beginning to end.In this role, you will be hiring subcontractors and working with engineers and architects as needed and keeping track of an inventory of equipment and materials.AdvantagesThis is a permanent year-round opportunity with a reputable Pool & Landscaping organization, that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, commission incentives, RRSP Matching Program, Benefits, Vacation and Flexibility.Responsibilities•Oversee construction projects from beginning to end•Prepare reports regarding job status•Train and mentor construction workers and construction laborers depending on the size of the project•Collaborate with subcontractors, engineers, architects, and key team members of the project team•Negotiate with external vendors on contract agreements•Obtain the appropriate permits and licenses from authorities for construction sites•Manage the budget and estimate costs•Determine the necessary equipment, materials, and manpower needed•Keep track of inventory, tools and equipment•Ensure supplies and equipment are ordered and delivered according to schedule•Allocate and manage resources to ensure that they are available when they are needed throughout the construction projects•Keep all stakeholders aware of the progress on projects and prepare progress reports regularly•Handle any environmental or local community issues that may come up during a projectQualifications•Extensive previous work experience managing budgets for construction projects•Pool construction knowledge and experience•PMP or an equivalent certification would be considered an asset•BSc/BA degree in Architecture, Building Science, Engineering, Construction Management, or another related fieldSummaryIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Hannon, Ontario
      • Permanent
      Our client in the Hamilton area has partnered with Randstad Engineering in the search for a Mechanical Designer to join their growing team! Do you have experience designing, drafting and developing wastewater systems? Have you worked closely with customers, supporting the installation and maintenance of wastewater systems? This role is for you!Advantages- competitive compensation- immediate benefits- immediate RSP match- opportunity to travel internationallyResponsibilities- review RFPs and Contracts to endure products are designed in full compliance and project costs are in line- design, develop and drafting of drawings- perform site inspections to identify defects-review and discuss change orders with customers and contactors- evaluation and selection of mechanical systems and materialsQualifications- post-secondary degree in Mechanical or Mechatronics Engineering- intermediate drafting designer with 5 years experience- competent in 3D and 2D design using Solidworks, AutoCAD, or Bentley Microstation software- familiar with Canadian standards and American codes such as CSA Z662, CSA Z245,CSA W59, ASME B31.1, ASME B31.3, ASME BPE, MSS SP-58- competent in performing calculations and design of pressure vessels, tanks, blowers, valves and instrumentation- experience in wastewater treatment plant design an assetSummaryApply online today! Or send your resume to Lisa Medeiros at lisa.medeiros@randsta.ca. Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our client in the Hamilton area has partnered with Randstad Engineering in the search for a Mechanical Designer to join their growing team! Do you have experience designing, drafting and developing wastewater systems? Have you worked closely with customers, supporting the installation and maintenance of wastewater systems? This role is for you!Advantages- competitive compensation- immediate benefits- immediate RSP match- opportunity to travel internationallyResponsibilities- review RFPs and Contracts to endure products are designed in full compliance and project costs are in line- design, develop and drafting of drawings- perform site inspections to identify defects-review and discuss change orders with customers and contactors- evaluation and selection of mechanical systems and materialsQualifications- post-secondary degree in Mechanical or Mechatronics Engineering- intermediate drafting designer with 5 years experience- competent in 3D and 2D design using Solidworks, AutoCAD, or Bentley Microstation software- familiar with Canadian standards and American codes such as CSA Z662, CSA Z245,CSA W59, ASME B31.1, ASME B31.3, ASME BPE, MSS SP-58- competent in performing calculations and design of pressure vessels, tanks, blowers, valves and instrumentation- experience in wastewater treatment plant design an assetSummaryApply online today! Or send your resume to Lisa Medeiros at lisa.medeiros@randsta.ca. Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Hannon, Ontario
      • Permanent
      Our client in the Hamilton area has partnered with Randstad Engineering in the search for an Intermediate Controls Engineer to join their team! Do you have hands on experience executing the electrical controls portion of projects.? Do you have a passion for mentoring junior engineers? This role is for you!Advantages- competitive compensation- immediate benefits - Opportunity to grow and develop a teamResponsibilities- Manage the delivery of the controls for all projects- Manage the delivery of the controls and automation for the factory automation and robots- Develop and approve conceptual designs in: Controls documentation; PLC and HMI programs; Control panel designs; BOMs; Schematics and system architectures- Develop and manage remote data collection and processing to facilitate warrantee compliance and plant optimization- Develop and implement new technologies to enhance abilities and design and deliver robust contras systems Qualifications- B.Sc. or CET Electrical and Controls- 5 years controls and programing engineering experience- Experience programming and design of Siemens and Allen Bradley Process Controls systems;- Experience programming SCADA systems- Willing to travel internationally and locally 25%- Ability to travel internationallySummaryApply online today! Or send your resume to Lisa Medeiros at lisa.medeiros@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our client in the Hamilton area has partnered with Randstad Engineering in the search for an Intermediate Controls Engineer to join their team! Do you have hands on experience executing the electrical controls portion of projects.? Do you have a passion for mentoring junior engineers? This role is for you!Advantages- competitive compensation- immediate benefits - Opportunity to grow and develop a teamResponsibilities- Manage the delivery of the controls for all projects- Manage the delivery of the controls and automation for the factory automation and robots- Develop and approve conceptual designs in: Controls documentation; PLC and HMI programs; Control panel designs; BOMs; Schematics and system architectures- Develop and manage remote data collection and processing to facilitate warrantee compliance and plant optimization- Develop and implement new technologies to enhance abilities and design and deliver robust contras systems Qualifications- B.Sc. or CET Electrical and Controls- 5 years controls and programing engineering experience- Experience programming and design of Siemens and Allen Bradley Process Controls systems;- Experience programming SCADA systems- Willing to travel internationally and locally 25%- Ability to travel internationallySummaryApply online today! Or send your resume to Lisa Medeiros at lisa.medeiros@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Ottawa, Ontario
      • Permanent
      Our client in the Ottawa area has partnered with Randstad Engineering in their search for a Technical Service Technician to join their team! As a Technical Representative, you are responsible for performing routine periodic manufacturer’s certification on medical equipment at customer locations.Technical Service Representative, OttawaLocation - Territory - Ottawa ON Industry -Medical Equipment.Ideal Experienced (3 - 5 Years) Full time - Permanent Must be a fluent Bilingual (English and French)If you are interested in this opportunity, apply today online or send your resume directly to ankur.vaid@randstad.ca.AdvantagesThis is a permanent opportunity, with a competitive compensation package in a thriving environment.ResponsibilitiesPrevious technical service experience, preferably at customer sites. ■Minimum three to five years of experience. ■Computer networking experience preferred ■Must have a valid driver’s license and acceptable driving record ■Must be able to travel outside of territory when needed ■Bilingual fluency (French/English) is a requirement. ■Must be customer-focused and able to build positive work relations ■Must have effective communication skills with both external and internal customers. ■Must have proficient computer skills (MS Suite)Main Accountabilities:Schedule and perform routine periodic manufacturer’s certification on medical equipment at customer locations in accordance with a service contract and company procedures and standards. Work may be closely supervised during the training phase.■Evaluate, diagnose and repair malfunctioning equipment in response to service calls. Be on-site when and where necessary, and "on-call" to provide emergency service, per the rotating schedule, outside of normal business hours.TSR may provide service via telephone communication■Install new equipment. Provide technical support for upgrades and other special service programs to support field service activities.■Promote customer satisfaction through proactive, professional communication with the Customer.■Use a company-supplied laptop to access service dispatches and customer information; document service work performance; extract equipment documentation and diagnostic information; place inventory and parts orders, and perform other electronic data communications and transfers as may be directed or required to effectively perform their job responsibilities.■Manage dispatches and time effectively and efficiently to drive high-impact services to customers. ■Adhere to key performance indicators, policies, and guidelines assigned both individually and departmentally, to ensure that final deliverables are in line with quality processes and business objectives.QualificationsYour QualificationsAssociates degree in Electronics, Biomedical Engineering or related discipline or equivalent combination of education and experienceSummaryIf you are interested in this opportunity, apply today online or send your resume directly to ankur.vaid@randstad.ca. Only qualified candidates will be contacted. Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our client in the Ottawa area has partnered with Randstad Engineering in their search for a Technical Service Technician to join their team! As a Technical Representative, you are responsible for performing routine periodic manufacturer’s certification on medical equipment at customer locations.Technical Service Representative, OttawaLocation - Territory - Ottawa ON Industry -Medical Equipment.Ideal Experienced (3 - 5 Years) Full time - Permanent Must be a fluent Bilingual (English and French)If you are interested in this opportunity, apply today online or send your resume directly to ankur.vaid@randstad.ca.AdvantagesThis is a permanent opportunity, with a competitive compensation package in a thriving environment.ResponsibilitiesPrevious technical service experience, preferably at customer sites. ■Minimum three to five years of experience. ■Computer networking experience preferred ■Must have a valid driver’s license and acceptable driving record ■Must be able to travel outside of territory when needed ■Bilingual fluency (French/English) is a requirement. ■Must be customer-focused and able to build positive work relations ■Must have effective communication skills with both external and internal customers. ■Must have proficient computer skills (MS Suite)Main Accountabilities:Schedule and perform routine periodic manufacturer’s certification on medical equipment at customer locations in accordance with a service contract and company procedures and standards. Work may be closely supervised during the training phase.■Evaluate, diagnose and repair malfunctioning equipment in response to service calls. Be on-site when and where necessary, and "on-call" to provide emergency service, per the rotating schedule, outside of normal business hours.TSR may provide service via telephone communication■Install new equipment. Provide technical support for upgrades and other special service programs to support field service activities.■Promote customer satisfaction through proactive, professional communication with the Customer.■Use a company-supplied laptop to access service dispatches and customer information; document service work performance; extract equipment documentation and diagnostic information; place inventory and parts orders, and perform other electronic data communications and transfers as may be directed or required to effectively perform their job responsibilities.■Manage dispatches and time effectively and efficiently to drive high-impact services to customers. ■Adhere to key performance indicators, policies, and guidelines assigned both individually and departmentally, to ensure that final deliverables are in line with quality processes and business objectives.QualificationsYour QualificationsAssociates degree in Electronics, Biomedical Engineering or related discipline or equivalent combination of education and experienceSummaryIf you are interested in this opportunity, apply today online or send your resume directly to ankur.vaid@randstad.ca. Only qualified candidates will be contacted. Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

    Thank you for subscribing to your personalised job alerts.

    explore over 5451 jobs with randstad.

    It looks like you want to switch your language. This will reset your filters on your current job search.