180 jobs found for Engineering - Page 3

Poste : Ingénieur manufacturierEmplacement : Saint-François-du-LacDomaine : Manufacturier*** Les applications par courriel avec cv au : stephanie.maurice@randstad.ca auront priorité sur les applications web ***Notre client situé dans la magnifique région de Saint-François-du-Lac est actuellement à la recherche d’un ingénieur manufacturier pour compléter son équipe. Nous recherchons une personne dynamique, qui désire travailler en équipe et qui souhaite faire la différence.Advantages-Salaire compétitif-Assurances collectives-RPDB-Généreux programme de vacances-Entreprise orientée vers l’avenir-Véritable tremplin pour votre carrièreResponsibilities•Assurer que le produit puisse être manufacturable en fonction des variantes demandées et selon les critères manufacturiers de géométrie, de soudure, tolérancement, d’ergonomie et logistique;• Établir les requis manufacturiers;•Évaluer les coûts de production, de projet et d'investissement;•Identifier et mitiger les risques reliés aux projets et à la gestion de changement;•Identifier et coordonner les livrables manufacturiers: outillages, équipements, documentations techniques, stratégies de validation, etc.;•Évaluer de nouveaux moyens technologique afin d’améliorer la fabrication du produit et l’efficacité des opérations;•Développer et optimiser les flux fabrication du produit et variantes ainsi que des matières afin d’assurer l’efficacité des opérations;•Analyser, proposer et implanter les méthodes de travail de façon à diminuer la non-valeur ajoutée, les sources de gaspillage et les risques d’accidents;•Estimer les temps d’opération et établir la séquence d’assemblage en collaboration avec l’équipe des opérations afin de produire les balancements de ligne appropriés;•Coordonner les changements de cadence de la production ainsi que l’évaluation des besoins de main-d’œuvre;•Toutes autres tâches connexes Qualifications-BAC en génie mécanique ou génie industriel-Minimum de 3 ans dans un poste similaire-Membre de l’OIQSummaryStéphanie Maurice Mon téléphone : 514.982.5927Mon courriel : stephanie.maurice@randstad.caAjoutez-moi à votre réseau LinkedIn pour rester à l’affût des nouvelles opportunités d’emplois ! Sachez que je suis en recrutement toute l’année pour des postes tels que : Planificateur , ingénieur, chargé de projets , acheteur, approvisionneur, coordonnateur qualité et plus encore. * L’emploi du genre masculin a pour but d’alléger le texte et d’en faciliter la lecture.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Roles and Responsibilities:•Define and prepare work packages for Mechanical/Static/Rotating Machinery/Electrical and Instrumentation & piping work in process units.•Manage assigned WO’s and backlog by priority and finish dates.•Prepare weekly and six weeks look ahead planning and update Scheduler on activities within the area.•Liaise with Operations, Engineering and other key stakeholders to review and validate scope of work order•Perform detailed planning, scheduling, resources estimation and allocation, progress and performance reporting in complex process plant:•Scope out each job through site visits and discussion or meetings with relevant stakeholders – understand the level of planning detail and documentation appropriate for each individual job•Identify steps on the work order based on specifications/procedures and Vendor best practices•Identify parts and services required to do the job and initiate the ordering process•Interact with Vendors on technical side•Generate bill of materials and identify materials with long lead delivery•Laisse and coordinate with E&I planers, EHT, Engineering and/or any other specialty to generate the work pack•Review along with execution the field execution plan•Be involved in routine/forced outages and scope of work creation•Maintain work orders/notifications to provide integrity of history tracking and maintenance repair costs data•Provide input and continuous improvement of the maintenance, planning, scheduling and data integrity processes and standards•Participate in the development of the Mechanical/Static/Rotating Machinery maintenance plans•Assist Supply Chain Management Group with initiatives for inventory reduction and control through reclassifying and cataloging of material in the CMMS•Coordinate with the maintenance team, Engineering support and Operations to ensure timely completion of maintenance activities and development of ongoing improvements•Integrate the safety reviews of the work packages involving all disciplines•Maintain accurate records and documentation•Coach Junior Planners in the WO and planning process•Be willing to support weekend coverage on an if required basis•Comply with all Health and Safety requirements establish within the Safety Management System set out by the Client•Comply with all regulations and legislative requirements of Occupational Health and Safety Act for the Province of Alberta and environmental standardsAdvantagesGreat opportunity to work in a very fast pasted environment with an amazing teamResponsibilitiesRoles and Responsibilities:•Define and prepare work packages for Mechanical/Static/Rotating Machinery/Electrical and Instrumentation & piping work in process units.•Manage assigned WO’s and backlog by priority and finish dates.•Prepare weekly and six weeks look ahead planning and update Scheduler on activities within the area.•Liaise with Operations, Engineering and other key stakeholders to review and validate scope of work order•Perform detailed planning, scheduling, resources estimation and allocation, progress and performance reporting in complex process plant:•Scope out each job through site visits and discussion or meetings with relevant stakeholders – understand the level of planning detail and documentation appropriate for each individual job•Identify steps on the work order based on specifications/procedures and Vendor best practices•Identify parts and services required to do the job and initiate the ordering process•Interact with Vendors on technical side•Generate bill of materials and identify materials with long lead delivery•Laisse and coordinate with E&I planers, EHT, Engineering and/or any other specialty to generate the work pack•Review along with execution the field execution plan•Be involved in routine/forced outages and scope of work creation•Maintain work orders/notifications to provide integrity of history tracking and maintenance repair costs data•Provide input and continuous improvement of the maintenance, planning, scheduling and data integrity processes and standards•Participate in the development of the Mechanical/Static/Rotating Machinery maintenance plans•Assist Supply Chain Management Group with initiatives for inventory reduction and control through reclassifying and cataloging of material in the CMMS•Coordinate with the maintenance team, Engineering support and Operations to ensure timely completion of maintenance activities and development of ongoing improvements•Integrate the safety reviews of the work packages involving all disciplines•Maintain accurate records and documentation•Coach Junior Planners in the WO and planning process•Be willing to support weekend coverage on an if required basis•Comply with all Health and Safety requirements establish within the Safety Management System set out by the Client•Comply with all regulations and legislative requirements of Occupational Health and Safety Act for the Province of Alberta and environmental standardsQualificationsQUALIFICATIONS:•Typically, 5+ years of related industry experience with interprovincial red seal in Boilermaker trade, Technical Diploma, University Degree (Mechanical Engineer) or equivalent.•Planning certification would be an asset.Expertise in:•Boilermaker trade in a maintenance Planning•Maintenance planning in an upgrader, refinery, Gas Plant or other industrial plant setting•Planning, budgeting and estimation•SAP or equivalent CMMS•Microsoft Office Suite & MS Project•Working in a fast pace environment with a proactive mindset•Excellent organization, time management, and communication skills.SummaryThis is a role that is based in NE British Columbia. If this is an opportunity that you quality for and would like more information, please reach out to Randstad for more information!dRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

We are seeking an experienced Quality Assurance Engineer for a high tech manufacturing client of ours in the Victoria area. The successful applicant will assume a key role to proactively prevent failure modes, reduce variation, improve product reliability, monitor quality concerns, initiate continuous improvements, and assist with product launches through risk evaluation and qualification testing. Advantages-Excellent compensation and benefits-Excellent company culture-Opportunities for advancementResponsibilities-Support the development of the Quality Management System (QMS) -Conducting internal audits, supplier qualification and performance evaluation reviews-Facilitate team-orientated root cause analysis activities, internal and external-Preparing and reviewing Corrective Action Report (CAR) submissions-Analyzing data and report results and Developing visual quality standards & standard operating procedures (SOP).-Lead the development of preventive methodologies:-Process Failure Mode & Effect Analysis (PFMEA)-Measurement Systems Analysis (MSA) through Gauge R&R and ANOVA process capability studies-Support the development of Statistical Process Control (SPC), Design of Experiments (DOE) and Equipment Validation (IQOQPQ).-Support New Product Introduction process from R&D into Manufacturing.-Collaborate with supporting departments & Manufacturing to drive Continuous Process Improvement initiatives including facilitating brainstorming & root cause analysis activities.-Conduct Reliability Analysis of products before and after launch.-Conduct Failure Analysis of products before and after launch.-Timely resolution of customer complaints and supplier non-conformances through corrective actions.-Support and assist the Quality Assurance Manager through: ISO, customer and regulatory audits & inspections; Preparation of QA reports; and Maintaining the effectiveness of the QMS.Qualifications-Bachelor’s degree in Mechanical, Electrical, Process or Industrial Engineering or equivalent B.Sc.-Minimum 5 years’ Medical Device or electronics manufacturing experience, with at least 3 years in a quality engineering function;-ISO 9001, ISO 13485 or GMP experience;-Strong working skills and experience with statistical software (such as JMP) and MS Office suite;-Excellent oral and written communications skills;-Excellent problem-solving skills;-SQL database development experience is a bonus.-Demonstrate positive attitude and self-motivationSummary If you would like to be considered for this opportunity please forward your resume via email to Nick Paraskeva | nick.paraskeva@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Position Summary:The Specialist, Cost will be responsible for the processing of overall Logistics Cost for imported goods from various Global points of Origin.The position will liaise directly with our Finance, Sales, Supply Chain Management and 3rd Party Logistics partners, as well as with our Customs Clearance providers and the CBSA / Border agencies as required.The role is responsible for a high-level understanding and control of Logistics Cost processes across different divisions, products and customer fulfillment directives, while ensuring that all practices follow the policy and procedures of Samsung Global and Canadian guidelines.Through this responsibility of cost management, the position will be expected to assist in providing proactive, solutions / suggestions for mitigating extraneous cost, avoiding exception-based spending in addition to implementing solutions for future-proof cost reduction and savings initiatives for entire Logistics budget.AdvantagesWork with a dynamic global company that is leader in their field.Position is an 18 month contract role, with internal long term possibilitiesResponsibilitiesEssential Duties and Responsibilities:•Monitor spend and create early warnings on cost issues, over-budget spend and divisional logistics cost of business•Processing and validation of invoices•Suggests, leads and implements cost-avoidance initiatives and savings protocols across the entire Logistics cost center spend for Canadian operations•Assist in providing leadership / training to all internal and external customers regarding cost avoidance and Best Practices for proper spend•Logistics Tariff Negotiation and coordination within partner requirements•CBSA coordination for Duties / HS classification / reclamation process as needed•Commercial Invoice / Trade Agreement liaison with Samsung’s Logistic partner company•Assist in tariff and cost process management within our internal customer database and external Importation / Customs provision affiliates•Single point of contact for invoice auditing•Reporting and validating Logistics budget and monthly accruals•Adhoc activities as requiredQualificationsEducation:•Post-secondary education from a recognized college or university required•Accounting / Economics / Cost professional •CCS (Certified Customs Specialist) an asset•Logistics designations / Professional Accreditation (CCLP, P.Log.,etc.) an assetKnowledge:•SAP / ERP competency required. •Intermediate MS Office (Excel, PowerPoint) required•Accounting and finance understandings required,•Excellent knowledge of Canadian Importation Law, •Customs management, •Tariff structures,•Risk / Control management of spend across multiple Logistics cost points. •Data retrieval and manipulation experience with demonstrable, verifiable output and report creation.Experience:•3+ years Logistics Cost Management inclusive of invoice verification process, Tariff master creation and maintenance.•Demonstrable understanding of cost-avoidance measures and implementation of same, with proven results.•Strong Consumer Goods market familiarity in Canada.SummaryApply online or email Brian Roach at Brian.Roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

RESPONSIBILITIES:• This role primary accountability is delivering safe, reliable and cost-effective station designs for the south regions• Responsible for operations technical support, stations equipment troubleshooting and performance assessment• Deliver and lead Engineering Assessments, Capital and Maintenance Projects designs• Lead and track all engineering designs documentations with required oversight and governance• Support and lead Engineering Tasks for Integration Initiatives within the Team and the Broader Business to deliver optimization for Engineering and Operations including the Content Management Program (CMP)• Coordinate with Electrical and Control groups for relevant design requirements and reviews.• Participate in delivering turnkey packages design• Actively participate in risk review and asset management review sessions• Provide support for Stations Design and Operational Support Functions• Contribute to the various industry activities to support companies’ leadership position• Lead new stations products and equipment introductory and relevant engineering assessment• Taking lead on replies to request for changes submitted by stakeholders• Building strong relationships with regional operations, construction, system improvements and other stakeholdersQUALIFICATIONS:Required Qualifications: - *NEW requirement* - Must have at least 2 years + of engineering related work experience (post graduate) in order to be considered for the role.• A university degree in Engineering• 4+ years of direct experience in Station, Pipeline and System Modelling Designs• Exceptional communication and stakeholder skills – both written and verbal to internal and external audiences• Analytical and Problem-Solving Skills and Advanced computer technology skills and able to learn new systems.• Knowledge of Relevant codes and standard including (but not limited to): CSA Z662, B149.1, CSA B51, API 520/521, and applicable TSSA Regulation.• Facilitation, project management and analytical skills with the ability to establish good working relationships and communicate/work with employees at all levels of the organization.Preferred:• PMP Designation• Experience in related functions for broader business context (safety & reliability, asset management, field operations, contracts and compliance)• knowledge in ASME B31.3 and B31.8, CAN/BNQ D 1784-000-5, B149.15 and B149.6• knowledge of FMEA, QRA, and HAZOP methodologies for assessing process safety• Awareness of natural gas distribution and customer stations designs and associated packages such as odorization and heatingPlease send your resume in confidence to paul.dusome@randstad.ca Advantages• Responsible for operations technical support, stations equipment troubleshooting and performance assessment• Deliver and lead Engineering Assessments, Capital and Maintenance Projects designs• Lead and track all engineering designs documentations with required oversight and governance• Support and lead Engineering Tasks for Integration Initiatives within the Team and the Broader Business to deliver optimization for Engineering and Operations including the Content Management Program (CMP)• Coordinate with Electrical and Control groups for relevant design requirements and reviews.ResponsibilitiesRESPONSIBILITIES:• This role primary accountability is delivering safe, reliable and cost-effective station designs for the south regions• Responsible for operations technical support, stations equipment troubleshooting and performance assessment• Deliver and lead Engineering Assessments, Capital and Maintenance Projects designs• Lead and track all engineering designs documentations with required oversight and governance• Support and lead Engineering Tasks for Integration Initiatives within the Team and the Broader Business to deliver optimization for Engineering and Operations including the Content Management Program (CMP)• Coordinate with Electrical and Control groups for relevant design requirements and reviews.• Participate in delivering turnkey packages design• Actively participate in risk review and asset management review sessions• Provide support for Stations Design and Operational Support Functions• Contribute to the various industry activities to support companies’ leadership position• Lead new stations products and equipment introductory and relevant engineering assessment• Taking lead on replies to request for changes submitted by stakeholders• Building strong relationships with regional operations, construction, system improvements and other stakeholdersQUALIFICATIONS:Required Qualifications: - *NEW requirement* - Must have at least 2 years + of engineering related work experience (post graduate) in order to be considered for the role.• A university degree in Engineering• 4+ years of direct experience in Station, Pipeline and System Modelling Designs• Exceptional communication and stakeholder skills – both written and verbal to internal and external audiences• Analytical and Problem-Solving Skills and Advanced computer technology skills and able to learn new systems.• Knowledge of Relevant codes and standard including (but not limited to): CSA Z662, B149.1, CSA B51, API 520/521, and applicable TSSA Regulation.• Facilitation, project management and analytical skills with the ability to establish good working relationships and communicate/work with employees at all levels of the organization.Preferred:• PMP Designation• Experience in related functions for broader business context (safety & reliability, asset management, field operations, contracts and compliance)• knowledge in ASME B31.3 and B31.8, CAN/BNQ D 1784-000-5, B149.15 and B149.6• knowledge of FMEA, QRA, and HAZOP methodologies for assessing process safety• Awareness of natural gas distribution and customer stations designs and associated packages such as odorization and heatingPlease send your resume in confidence to paul.dusome@randstad.ca Qualifications• A university degree in Engineering• 4+ years of direct experience in Station, Pipeline and System Modelling Designs• Exceptional communication and stakeholder skills – both written and verbal to internal and external audiences• Analytical and Problem-Solving Skills and Advanced computer technology skills and able to learn new systems.• Knowledge of Relevant codes and standard including (but not limited to): CSA Z662, B149.1, CSA B51, API 520/521, and applicable TSSA Regulation.SummaryRESPONSIBILITIES:• This role primary accountability is delivering safe, reliable and cost-effective station designs for the south regions• Responsible for operations technical support, stations equipment troubleshooting and performance assessment• Deliver and lead Engineering Assessments, Capital and Maintenance Projects designs• Lead and track all engineering designs documentations with required oversight and governance• Support and lead Engineering Tasks for Integration Initiatives within the Team and the Broader Business to deliver optimization for Engineering and Operations including the Content Management Program (CMP)• Coordinate with Electrical and Control groups for relevant design requirements and reviews.• Participate in delivering turnkey packages design• Actively participate in risk review and asset management review sessions• Provide support for Stations Design and Operational Support Functions• Contribute to the various industry activities to support companies’ leadership position• Lead new stations products and equipment introductory and relevant engineering assessment• Taking lead on replies to request for changes submitted by stakeholders• Building strong relationships with regional operations, construction, system improvements and other stakeholdersQUALIFICATIONS:Required Qualifications: - *NEW requirement* - Must have at least 2 years + of engineering related work experience (post graduate) in order to be considered for the role.• A university degree in Engineering• 4+ years of direct experience in Station, Pipeline and System Modelling Designs• Exceptional communication and stakeholder skills – both written and verbal to internal and external audiences• Analytical and Problem-Solving Skills and Advanced computer technology skills and able to learn new systems.• Knowledge of Relevant codes and standard including (but not limited to): CSA Z662, B149.1, CSA B51, API 520/521, and applicable TSSA Regulation.• Facilitation, project management and analytical skills with the ability to establish good working relationships and communicate/work with employees at all levels of the organization.Preferred:• PMP Designation• Experience in related functions for broader business context (safety & reliability, asset management, field operations, contracts and compliance)• knowledge in ASME B31.3 and B31.8, CAN/BNQ D 1784-000-5, B149.15 and B149.6• knowledge of FMEA, QRA, and HAZOP methodologies for assessing process safety• Awareness of natural gas distribution and customer stations designs and associated packages such as odorization and heatingPlease send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

The Advisor SSC coordinates and executes sourcing and procurement of materials and/or services which includes, but is not limited to: liaison between Supply Chain Management and Operations and Suppliers to ensure that all materials are , tracked, expedited and received.Responsibilities:• Reviews and analyzes material requisitions.• Acts as a liaison between user departments and suppliers.• Assists other buyers, and expeditors as well as manage good receipts.• Maintains records in accordance with established policies and procedure, and audit guidelines/Sox requirements.• Investigates and facilitates issue resolution relative to procurement activities as requested• Enables Supply Chain strategic objectives by periodically reviewing and recommending adjustments to processes, systems, and tools.• Understands and participates in Supply Chain Management Department team initiatives.• Other duties as assigned.Qualifications:Required:• Related university degree (Purchasing / Supply Chain Management, Finance, Bus. Admin or other related areas)• 4-6 years of experience within Supply Chain, Finance, Accounting or related field.• Efficient in multi-tasking and time management skills.• Ability to facilitate and lead meetings to review critical items• Ability to manage a variety of work processes.• Ability to work independently with limited guidance.• Basic understanding of supply chain concepts including an understanding of current market conditions, key suppliers, industry knowledge and materials or services being procured (basic materials to complex services).• Proven operational and financial reporting skills( Oracle and SAP).• Proven application of relevant knowledge of Supply Chain systems (SAP/Oracle) in normal business situations without use of reference guides/assistance.• Advanced computer skills required – MS Office Suites; specifically MS Excel pivot tables.• Ability to effectively communicate within a team environment.• Ability to analyze invoice issues, identifying discrepancies and effectively moving to resolution.• Knowledge of SAP/Oracle operating systems.• Ability to multi-task in a fast-paced environment.• Ability to influence stakeholders/customers without authority.• Possess a “sense of urgency” and ability to thrive in an ambiguous environment.• Strong analytical and problem solving skills.• Knowledge of MS Office, MS Excel, MS Power Point and SharePointAdvantages• Acts as a liaison between user departments and suppliers.• Assists other buyers, and expeditors as well as manage good receipts.• Maintains records in accordance with established policies and procedure, and audit guidelines/Sox requirements.• Investigates and facilitates issue resolution relative to procurement activities as requested• Enables Supply Chain strategic objectives by periodically reviewing and recommending adjustments to processes, systems, and tools.• Understands and participates in Supply Chain Management Department team initiatives.ResponsibilitiesThe Advisor SSC coordinates and executes sourcing and procurement of materials and/or services which includes, but is not limited to: liaison between Supply Chain Management and Operations and Suppliers to ensure that all materials are , tracked, expedited and received.Responsibilities:• Reviews and analyzes material requisitions.• Acts as a liaison between user departments and suppliers.• Assists other buyers, and expeditors as well as manage good receipts.• Maintains records in accordance with established policies and procedure, and audit guidelines/Sox requirements.• Investigates and facilitates issue resolution relative to procurement activities as requested• Enables Supply Chain strategic objectives by periodically reviewing and recommending adjustments to processes, systems, and tools.• Understands and participates in Supply Chain Management Department team initiatives.• Other duties as assigned.Qualifications:Required:• Related university degree (Purchasing / Supply Chain Management, Finance, Bus. Admin or other related areas)• 4-6 years of experience within Supply Chain, Finance, Accounting or related field.• Efficient in multi-tasking and time management skills.• Ability to facilitate and lead meetings to review critical items• Ability to manage a variety of work processes.• Ability to work independently with limited guidance.• Basic understanding of supply chain concepts including an understanding of current market conditions, key suppliers, industry knowledge and materials or services being procured (basic materials to complex services).• Proven operational and financial reporting skills( Oracle and SAP).• Proven application of relevant knowledge of Supply Chain systems (SAP/Oracle) in normal business situations without use of reference guides/assistance.• Advanced computer skills required – MS Office Suites; specifically MS Excel pivot tables.• Ability to effectively communicate within a team environment.• Ability to analyze invoice issues, identifying discrepancies and effectively moving to resolution.• Knowledge of SAP/Oracle operating systems.• Ability to multi-task in a fast-paced environment.• Ability to influence stakeholders/customers without authority.• Possess a “sense of urgency” and ability to thrive in an ambiguous environment.• Strong analytical and problem solving skills.• Knowledge of MS Office, MS Excel, MS Power Point and SharePointQualifications• Related university degree (Purchasing / Supply Chain Management, Finance, Bus. Admin or other related areas)• 4-6 years of experience within Supply Chain, Finance, Accounting or related field.• Efficient in multi-tasking and time management skills.• Ability to facilitate and lead meetings to review critical items• Ability to manage a variety of work processes.• Ability to work independently with limited guidance.• Basic understanding of supply chain concepts including an understanding of current market conditions, key suppliers, industry knowledge and materials or services being procured (basic materials to complex services).• Proven operational and financial reporting skills( Oracle and SAP).• Proven application of relevant knowledge of Supply Chain systems (SAP/Oracle) in normal business situations without use of reference guides/assistance.• Advanced computer skills required – MS Office Suites; specifically MS Excel pivot tables.• Ability to effectively communicate within a team environment.• Ability to analyze invoice issues, identifying discrepancies and effectively moving to resolution.• Knowledge of SAP/Oracle operating systems.• Ability to multi-task in a fast-paced environment.• Ability to influence stakeholders/customers without authority.• Possess a “sense of urgency” and ability to thrive in an ambiguous environment.• Strong analytical and problem solving skills.• Knowledge of MS Office, MS Excel, MS Power Point and SharePointSummaryThe Advisor SSC coordinates and executes sourcing and procurement of materials and/or services which includes, but is not limited to: liaison between Supply Chain Management and Operations and Suppliers to ensure that all materials are , tracked, expedited and received.Responsibilities:• Reviews and analyzes material requisitions.• Acts as a liaison between user departments and suppliers.• Assists other buyers, and expeditors as well as manage good receipts.• Maintains records in accordance with established policies and procedure, and audit guidelines/Sox requirements.• Investigates and facilitates issue resolution relative to procurement activities as requested• Enables Supply Chain strategic objectives by periodically reviewing and recommending adjustments to processes, systems, and tools.• Understands and participates in Supply Chain Management Department team initiatives.• Other duties as assigned.Qualifications:Required:• Related university degree (Purchasing / Supply Chain Management, Finance, Bus. Admin or other related areas)• 4-6 years of experience within Supply Chain, Finance, Accounting or related field.• Efficient in multi-tasking and time management skills.• Ability to facilitate and lead meetings to review critical items• Ability to manage a variety of work processes.• Ability to work independently with limited guidance.• Basic understanding of supply chain concepts including an understanding of current market conditions, key suppliers, industry knowledge and materials or services being procured (basic materials to complex services).• Proven operational and financial reporting skills( Oracle and SAP).• Proven application of relevant knowledge of Supply Chain systems (SAP/Oracle) in normal business situations without use of reference guides/assistance.• Advanced computer skills required – MS Office Suites; specifically MS Excel pivot tables.• Ability to effectively communicate within a team environment.• Ability to analyze invoice issues, identifying discrepancies and effectively moving to resolution.• Knowledge of SAP/Oracle operating systems.• Ability to multi-task in a fast-paced environment.• Ability to influence stakeholders/customers without authority.• Possess a “sense of urgency” and ability to thrive in an ambiguous environment.• Strong analytical and problem solving skills.• Knowledge of MS Office, MS Excel, MS Power Point and SharePointRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Are you a specialist in Automation new product development?Are you looking for a new opportunity with a great organization?If so, this could be the opportunity for you!Utilizing the SAFe Methodology, support the objectives for one or more NPI projects through the stories they are assigned. Support story level planning to programs assigned. These team members are required to have good knowledge of the product they are supporting gained through experience or time spend with their development counterparts. A Sr. Engineering actively engage with the team members working stories associated with the same objectives across the required ART(s) and aligning with their Product Owners priority and timeline. At times, these engineering will also work with ISC Integration Managers on small programs. They are responsible for supporting the creation of a comprehensive Manufacturing Design Specification based on the work they complete on Design for Assembly, Test and Automation analysis that will be carried out by the Build team.AdvantagesWork with a global, growing organization that helps industry find solutionsStarts as a contract, with opportunity to go longer termResponsibilitiesKey Responsibilities:• With direction in the form of a SAFe stories and support from Architects or Product Owners or SME Project Engineers in the Industrial Design Organization support the introduction of new products through Design for initiatives and through the Manufacturing Design Specification in accordance with the RA Common Product Development (CPD) processes• Works with Engineering Design and Manufacturing Engineering Built team to ensure optimum product and process design for manufacturability for a New Product Introduction• Collaborates with development engineering to leverage Df(x) to obtain product cost.• Supports development of manufacturing specification and validate against Digital twins• Supports development of the associated documentation and estimates manufacturing cost• Works on issues of medium scope where analysis of situations or data requires an in-depth evaluation of variable factors.• Exercises judgement in supporting the selection of methods, techniques, and evaluation criteria for obtaining resultsQualificationsSkills, Knowledge, Experience and Education• Bachelor of Science degree in Industrial/Mechanical/Electrical Engineering, or equivalent degree or education• Minimum of 5 years’ experience in engineering• Demonstrated understanding of New Product Introduction process• Knowledge of Project Management• Understanding and can demonstrate Design for Assembly, Cost and Automation on an NPI• Knowledge of proven Manufacturing process and how to apply• Lead Process Failure Mode Effects Analysis (PFMEA)• Ability to execute transactions in an Enterprise Resource Planning system, preferably SAP.• Exhibit good organizational and interpersonal skills• Good written and verbal communications in English• Proficient using Microsoft Office programs• Acts as part of a cross functional project teams to ensure manufacturing validation strategies are efficient and stream-lined with an end-to-end perspective• Actively participate in the new product design evaluation process• Ability to lead and manage multiple story cards across different NPI Projects and teams• Support the development of strategies for the procurement and installation of all final functional assembly related capital equipment required for production facilitiesInformation Processing Capability (Factors of Complexity)• Works under general direction but must be able to be self-directed and can adjust to changes in priority and scope• Apply engineering problem solving skills and within Rockwell Automation systems to perform duties and responsibilities• Communicate well, both verbally and written form, to a broad audience of varying technical and cultural background• Use facts and logic to influence others• Contribute to development of group level goals and strategies for achieving those goals.• Work concurrently on multiple NPI and non-NPI projects.• Teach other Industrialization Engineers how to perform the work that is expected of them, the business processes that they participate in, and how to use the various tools (e.g. business system, computer programs, etc.) needed to complete their work.• Support research, development and implement or cost reduction and process improvement projects. May lead a small team to complete these projects• Ability to Support a Design for Manufacturability and Assembly (DFMA) and collaborate to achieve product cost• Basic understanding of Lean Six Sigma tools and methodologies• Works well with other and is able to think and act strategically when required• Some travel is required (10% - 15%); possibly international.• Ability to operate, respond, and work in multiple time zones as requiredKey Performance Metrics• Execute project work according to project schedules.• Support the Design Execution of NPI and CE initiative to meet objectives around total product cost using Df(x) tools and consistent feedback early in the design process.• When asked writing and /or validating Stores created to achieve these objectives and ensuring they are comprehensive and clear to the personal assigned the work.• Supporting on time delivery of a comprehensive Manufacturing Design Specification to be carried out but the Industrialization Build team located in operations locationSummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Are you a Hardware Engineer with an Electronics background?Are you looking for an opportunity to enhance your career?If so, this could be the opportunity for you!Working with a team of Developers, you will develop new products with your responsibilities including the following items,· Conceive new product development implementations to achieve defined requirements· Architect system and design sub-systems· Schematic and PCB layout using Cadence Tools· Interface with mechanical design· Prototyping and testing new hardware designsAdvantagesCompetitive compensation packageCustomer first cultureCompany has grown through extensive R&D and investmentResponsibilities· Conceive new product development implementations to achieve defined requirements· Architect system and design sub-systems· Schematic and PCB layout using Cadence Tools· Interface with mechanical design· Prototyping and testing new hardware designsQualificationsQualifications· Minimum 8 years development experience· ARM, x86 knowledge· Ethernet Switch, Ethernet PHY, USB, LTE Modules, GPS, other communications peripherals design experience· Power tree design· Excellent working knowledge of electronic componentsSummaryApply Online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Position Description:•Receive incoming TDP release and change control documentation, perform a basic check for completeness and log in the Configuration Management (CM) Configuration Status Accounting (CSA) system•Review, audit and prepare TDP release documentation (ERRs. SRRs. STRRs and new drawings) for final release•Review, audit and prepare change control documentation (Change requests, Deviations etc.) for Change Control Board (CCB) processing•Coordinate and chair CCB activities/meetings•Coordinate and support cross site change control activities with other client sites (i.e. SCCB)•Coordinate change activities with customer (Canada, USG) or designated NDQAR representatives•Interpret and apply Trade Compliance (ITAR, CGD, EAR) and Intellectual Property (IP) requirements for items being releasedAdvantagesChange Control London Ontario12 month contract$24.00 – 33.00/hour Responsibilities•Manage Teamcenter (TC) Change Management process•Manage Configuration Management controlled Items within Teamcenter•Review and execute GDLS-C Engineering, Production and TDP release (Models & Drawings)•Review and execute Special Tools & Test Equipment and Sustainment Services TDP release (Models & Drawings)•Review and execute supportability change Control process (Change Requests (CRs) Change Notices (CNs) and Supplier Engineering Change Proposals (ECPs))•Support Production Launch (PLP) and other production support activities•Manage all CM activities associated with the RRITS (Rework, Retrofit, Information Tracking System) system•Maintain Accurate CM files and recordsQualificationsPosition Requirements: •Completed University Degree or College Diploma•Minimum 1-2 years technical experience•Proficiency in analyzing technical data including Engineering drawings, Specifications and change documents•Proficiency in Configuration Management Identification, Release and Change Control processes•Strong problem solving and decision making ability•Proficient communication, organization and prioritization skills•Demonstrated skill in Microsoft Office applications•Goal oriented and able to work under time sensitive/demanding conditionsSummaryPreferred Requirements:•Configuration Management/Change Control experience•Product Life Cycle (PLM) or Product Data Management (PDM) (i.e. Teamcenter), and Enterprise Resource Systems (ERP) system experience If you have the necessary qualifications to excel in this position, please apply online. Questions?I can be reached at dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Our Automotive client in the GTA area has partnered with Randstad Engineering in their search for a Program Manager to add to their dynamic team. This opportunity is opened due to growth.Title - Program Manager (Tube Bending and perforators)Location - Mississauga, ONShift - Straight DaysSalary - Flexible as per experience and qualification.Industry - AutomotiveReporting to - Advanced Engineering ManagerIf you are interested in this opportunity, apply today online or send your resume directly to Ankur Vaid at ankur.vaid@randstad.caGENERAL RESPONSIBILITYFacilitates the development of programs by recommending, monitoring or adjusting appropriate plant operating procedures to meet program requirements. Coordinates program vendor activities including design, tooling, and parts suppliers to ensure cost and delivery and quality targets are met according to customer’s requirements and schedules.Provide design service including product concept generation, product and market research, 2D and 3D concept visualization, presentation materials, engineering and manufacturing process coordination. Assists production with troubleshooting daily manufacturing problems and continually evaluates current products in an effort to decrease costs. AdvantagesThis is a permanent opportunity, with a competitive compensation package in a thriving environment.ResponsibilitiesSPECIFIC RESPONSIBILITIES1.Responsible for the coordination of Engineering projects. 2.Part proposal drawings: starting from rough design concepts up to detail/final drawings. Responsible for all drawing information, including tolerance/fits, stack-ups, GD&T specifications and surface finishes. Carries out the design and development required to achieve project objectives and budgets. Processes new jobs for quotation and prepare all design development information for the APQP process. 3.Design of parts, tooling, jigs, fixtures and provides direction and coordination of all activities to ensure projects are completed as per the engineering Manager’s expectation and in a timely and cost-effective manner. 4.Specifies requests and coordinates all sub-contracted work (i.e. FEAs, Product Validation and Testing, CAD drawing file conversion) and assures timely completion. 5.Responsible for the on-time and on-budget completion of all customer-required deliverables for these projects.6.Main point of contact with our customers for the launch of new projects.7.Responsible for the direction and support of the APQP Launch Team for both prototype and production requirements.8.Develops and maintains part interim stage drawings. 9.Coordinate APQP new product launch process internally and externally with the customer and prepare work schedules with interim and end target estimates for all projects within his/her responsibility.10.Ensure that capital equipment purchases meet all safety requirements11.Designs new and/or improves production machines and tooling. 12.Evaluates the progress of the product launch activities.13.Coordinate the specification and procurement of capital equipment, tooling, gauging and personnel for new launches.14.Coordination and implementation of Engineering changes.15.Attends and/or conducts meetings with customers, with respect to design/launch reviews.16.Responsible for activities related to assigned projects, as per TS16949 Procedures. (i.e. APQP, Design FMEAs) or other applicable industry standards.17.Maintains proper filing systems including CAD file library, to ensure all information is properly stored and easily retrieved.18.Assist in the development of quotations for new work and engineering changes.19.Assists with the creation of quality documentation and work instruction for new equipment and tooling.20.Oversees development and maintenance of quality documentation in the area of Process Flow diagrams, PFMEA’s, DFMEA’s, QA Function and Work Instructions.21.Available for discussion in setting up for initial production runs and as requested in resolving production problems on new products. 22.Provides Engineering support to other departments within the company and performs duties and tasks as directed by the Engineering Manager.23.Initiates plans and ideas for cost reduction and/or quality improvement measures.24.Responsible for ensuring that the organization is working with the most up-to-date and pertinent engineering drawings, databases and parts lists.25.Accountable for on-time submission of customer requirements for product launch (PPAP, prototype requirements, volume ramp, etc…), on-budget launch of projects, High-quality submission to the customer (zero launch PR & R’s / QR’s etc…), 26. Overall project performance with respect to OEE, quoted manpower, quoted cycle times and scrap, Reporting to Management any perceived deficiencies in a program launch before failure to achieve a target is realized.QualificationsEXPERIENCE REQUIRED•Bachelor of Science diploma in Mechanical Engineering or college diploma in Mechanical Engineering•3-5 years’ previous work experience in a similar capacity within a manufacturing or automotive industry•Technical skills: APQP procedures, Quality Engineering, Supplier Management, Blueprint reading, Advanced measuring techniques, GD&T, QFD, Design for Manufacturing, Design for Assembly VE/VA, DOE, •Team Oriented Problem Solving, Problem Solving Techniques: 8D,5why, fishbone diagram, DFMEA/PFMEA, floor plans, process flow diagram, control plants, quoting procedures, AutoCAD, DraftSight, MS Project, MS Word, and MS Excel.SummaryIf you are interested in this opportunity, apply today online or send your resume directly to Ankur Vaid at ankur.vaid@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Are you Engineer in Training with interest in the field of pipeline integrity? Do you enjoy planning and executing processes, practices and projects for Integrity Management programs? We have an industry-leading pipeline integrity team and are looking for an EIT to join our team.Here's what you will do:• Ensure pipeline Threat Assessments and Integrity Plans are completed for assigned pipelines, including Fitness for Service assessments.• Execute on all threat management programs on assigned segments of the companies GDS system.• Ensure pipeline Integrity Plans are complete and designed for achieving safety targets including zero rupture and zero leak goals.• Conduct pipeline integrity assessment and analysis for pipeline integrity threat management programs related to the Enbridge GDS system, including Corrosion, Crack, Deformation Threat Management and interacting threats• Assess pipelines for retrofits prior to in-line inspection, select inspection technologies and techniques, determine re-inspection frequency of pipelines• Analyze data from Inline Inspection, Direct Assessment, Hydrotesting and Nondestructive Examination (NDE) field results and determine actionable requirements such as Integrity Digs and Repairs, as well as pipeline Fitness for Service• Ensure the continued compliance of integrity management processes with regulations, standards and best practices.• Support stakeholders on integrity mattersRequirementsUniversity Degree in Engineering• Valid class G drivers’ license and maintenance of a responsible driving record.• Ability to think analytically and perform detailed analysis.• Ability to coordinate multiple projects at one time and meet defined timelines.• Ability to work with minimal oversight• Must be computer literate (familiarity with PC applications).• Excellent verbal and written communication skills.• Strong interpersonal and team skills.• Organized and strategic thinker.• Self-starter.Please send your resume in confidence to paul.dusome@randstad.caAdvantages• Conduct pipeline integrity assessment and analysis for pipeline integrity threat management programs related to the Enbridge GDS system, including Corrosion, Crack, Deformation Threat Management and interacting threatsResponsibilitiesAre you Engineer in Training with interest in the field of pipeline integrity? Do you enjoy planning and executing processes, practices and projects for Integrity Management programs? We have an industry-leading pipeline integrity team and are looking for an EIT to join our team.Here's what you will do:• Ensure pipeline Threat Assessments and Integrity Plans are completed for assigned pipelines, including Fitness for Service assessments.• Execute on all threat management programs on assigned segments of the companies GDS system.• Ensure pipeline Integrity Plans are complete and designed for achieving safety targets including zero rupture and zero leak goals.• Conduct pipeline integrity assessment and analysis for pipeline integrity threat management programs related to the Enbridge GDS system, including Corrosion, Crack, Deformation Threat Management and interacting threats• Assess pipelines for retrofits prior to in-line inspection, select inspection technologies and techniques, determine re-inspection frequency of pipelines• Analyze data from Inline Inspection, Direct Assessment, Hydrotesting and Nondestructive Examination (NDE) field results and determine actionable requirements such as Integrity Digs and Repairs, as well as pipeline Fitness for Service• Ensure the continued compliance of integrity management processes with regulations, standards and best practices.• Support stakeholders on integrity mattersRequirementsUniversity Degree in Engineering• Valid class G drivers’ license and maintenance of a responsible driving record.• Ability to think analytically and perform detailed analysis.• Ability to coordinate multiple projects at one time and meet defined timelines.• Ability to work with minimal oversight• Must be computer literate (familiarity with PC applications).• Excellent verbal and written communication skills.• Strong interpersonal and team skills.• Organized and strategic thinker.• Self-starter.Please send your resume in confidence to paul.dusome@randstad.caQualificationsUniversity Degree in Engineering• Valid class G drivers’ license and maintenance of a responsible driving record.• Ability to think analytically and perform detailed analysis.• Ability to coordinate multiple projects at one time and meet defined timelines.• Ability to work with minimal oversight• Must be computer literate (familiarity with PC applications).• Excellent verbal and written communication skills.• Strong interpersonal and team skills.• Organized and strategic thinker.• Self-starter.SummaryAre you Engineer in Training with interest in the field of pipeline integrity? Do you enjoy planning and executing processes, practices and projects for Integrity Management programs? We have an industry-leading pipeline integrity team and are looking for an EIT to join our team.Here's what you will do:• Ensure pipeline Threat Assessments and Integrity Plans are completed for assigned pipelines, including Fitness for Service assessments.• Execute on all threat management programs on assigned segments of the companies GDS system.• Ensure pipeline Integrity Plans are complete and designed for achieving safety targets including zero rupture and zero leak goals.• Conduct pipeline integrity assessment and analysis for pipeline integrity threat management programs related to the Enbridge GDS system, including Corrosion, Crack, Deformation Threat Management and interacting threats• Assess pipelines for retrofits prior to in-line inspection, select inspection technologies and techniques, determine re-inspection frequency of pipelines• Analyze data from Inline Inspection, Direct Assessment, Hydrotesting and Nondestructive Examination (NDE) field results and determine actionable requirements such as Integrity Digs and Repairs, as well as pipeline Fitness for Service• Ensure the continued compliance of integrity management processes with regulations, standards and best practices.• Support stakeholders on integrity mattersRequirementsUniversity Degree in Engineering• Valid class G drivers’ license and maintenance of a responsible driving record.• Ability to think analytically and perform detailed analysis.• Ability to coordinate multiple projects at one time and meet defined timelines.• Ability to work with minimal oversight• Must be computer literate (familiarity with PC applications).• Excellent verbal and written communication skills.• Strong interpersonal and team skills.• Organized and strategic thinker.• Self-starter.Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Our global client in the Halifax area is looking to hire for Project Manager/Coordinator with industrial project experience. This will be a 12 months embedded contract (renewable) - Part-time (Ideally 2-3 days a week)If you are interested in this opportunity, please send your resume directly to Swapna Nair at swapna.nair@randstad.caOnly qualified candidates will be contacted.Advantagesone year extendable contractGlobal Brandcompetitive salaryOpen to hiring T4 or IncResponsibilitiesOur well-known client is looking to add a Project Manager to their team on a renewable contract. This is a great opportunity for a seasoned PM who is looking to play an important role on the team and work at their Waterville in Nova Scotia. This is a mobile role that requires travel within Nova Scotia.QualificationsA degree in Electrical (ideal) or Mechanical EngineeringPEng is good to have or an EIT.SummaryIf you are interested in this opportunity, please send your resume directly to Swapna Nair at swapna.nair@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Our global client in the Halifax area is looking to hire for Electrical/Mechanical Engineer with automation experience. Ideally worked in ICI or similar projects.This will be a 12 months embedded contract (renewable). If you are interested in this opportunity, please send your resume directly to Swapna Nair at swapna.nair@randstad.caOnly qualified candidates will be contacted.Advantagesone year extendable contractGlobal Brandcompetitive salaryOpen to hiring T4 or IncResponsibilities- Experienced with electrical design standards and able to complete controls systems designs using standard CAD design tools- Experienced with PLC programming standards & programming software, including GRAFCET, Ladder Logic, and Structured Text.- Specific experience with Rockwell and Siemens is a plus.- Experienced with Variable Frequency drives and Motion Control technologies. Specific experience with Rockwell, Siemens and Control Techniques is a plus.- Experienced with HMI configuration, programming and communication. Specific experience with Rockwell is a plus.- Experienced with controls systems network interfaces and various protocols for communications between devices including computer system databases.QualificationsA degree in Electrical (ideal) or Mechanical EngineeringPEng is good to have or an EIT.SummaryIf you are interested in discussing this opportunity further then please send your resume directly to Swapna Nair at swapna.nair@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Our client in Peterborough ON is looking for a Maintenance Manager to lead the maintenance team. The ideal candidate will be someone who has 7-10 years of experience managing a team preferably in the dairy, agribusiness, brewing or food industry. The manager will be in charge of setting the Engineering and Maintenance strategy for the site and lead capital and strategic projects.AdvantagesThe Maintenance Manager will develop annual budget and execute business plans, including the development & implementation of strategies, processes & programs.Responsibilities• Manages Engineering and Maintenance strategy for the site and lead capital and strategic projects.• Develops annual budget and executes business plans, including the development & implementation of strategies, processes & programs.• Lead capital projects and manage the capital spend start to finish along with managing internal workforce, contractors throughout the process and stakeholders.• Manage the departmental workload and effectively plan day to day and also short and long terms initiatives. • Responsible for supervision of maintenance team. Responsibilities include: the employing, the training, the supervising, the disciplining, and the discharging of the employees in the respective department; subject to the approval of the company. • Design, configuration, integration and implementation of process control solutions for various manufacturing specifications.• Develop P&IDs and loop descriptions for processes, and/or equipment• Develop user requirement specifications & design, write, implement, test and document PLC and HMI software. • Documentation of all schematic, diagram changes, and PLC programming Documentation changes to keep plant records current. • Develop control system validation/testing protocols. • Troubleshoot control systems from the field element up through operator interfaces and databases Create, edit, and document batch systems recipes • Creates and adheres to a work order planning and scheduling process; Ensure service calls and machinery repairs are completed in a timely manner• Oversee plant projects and account accurately for expenditures for each project.• Purchasing and Purchase Order control. • Serve as a resource and a technical expert for the plant in all disciplines of automation controls for line, utilities support and process equipment. • Performs training needs analyses, as appropriate, and initiates, develops, and/or coordinates the implementation of specific training and development programs for staff and associates. • Continually reduces equipment downtime and increase availability through the establishment of a preventive/predictive maintenance program (including failure analysis) designed, directed, monitored and continually improved. • Drive root cause corrective action for issues and continuous improvement in performance. • Supports plant facilities and equipment maintenance to produce quality products in an efficient and profitable manner • Responsible to maintain and repair all production equipment: pumps, Pasteurizers, homogenizers, process equipment, evaporators, dryers, valves, baggers, controls, etc. • Responsible to maintain and repair all support equipment: boiler, air-compressors, refrigeration equipment, compressors, thermal storage units, condensers, vacuum pumps, air conditioning units, sewer meters, waste water systems, conductivity meters, water meters, etc.• Be an active part of the emergency response team as prescribed by the company Safety Program. • Oversee the fabrication and manufacturing of equipment for production needs; product and process piping, sanitary equipment, steam lines, chemical lines, pneumatic lines, etc.• Establishes and maintains a stockroom operation that provides repair parts for critical process equipment as well as necessary consumables for the plant. • Participates in, and supports, the safety and environment programs. Be the safety and environment champion as required. • With the approval of management, enforce all company policies including working rules. • Perform other duties as assigned by management. Food Safety Responsibilities • Notify about any repairs or adjustments that are required that may affect product quality or food safety. • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas. • Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company. • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system. • Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system. • Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected. • In the event of absence, another employee with the same skill level will assume the duties and responsibilities as required Qualifications Qualifications• Bachelor Science degree in Electrical, Mechanical or Computer Engineering, at least 7 years of industrial experience that is directly related to the duties and responsibilities specified. • Experience in commissioning and startup of control systems • Experience in the Food Manufacturing industry preferred • Experience in the Dairy Industry is highly preferred.• Experience with Aseptic or low acid filling systems is highly preferred. • Knowledge of Provincial, Federal regulations for a dairy manufacturing facility is a plus. • Familiarity with dairy productions processes, Clean In Place, CFIA, DFO, OMAFRA, Pasteurized Milk Ordinance and legal pasteurization controls/requirements is a plus. • Specific knowledge of GMP’s and batch process control in the food science industry with validation experience is a plus. • Strong Engineering & Maintenance experience and working knowledge of plant maintenance software, SAP preferred. • Proficiency in commissioning and startup of control systems. • Ability to work with engineers, external vendors, operators and management to manage projects and assignments is essential. • Ability to troubleshoot control systems from the field element up through operator interfaces and databases. • Proficiency with control system networking technologies and PC networking technology. • Excellent written and verbal communication skills. • Skill in organizing resources and establishing priorities. • Ability to maintain confidentiality of records and information. • Strong interpersonal and communication skills and the ability to work effectively with a diverse community. • Proficiency designing and programming control systems with emphasis on PLCs, SCADA or HMI systems. • Familiarity with Canadian electrical and safety requirements • Knowledge of and familiarity with the Electric Code and international standards. • Wiring schematic capabilities. • Tolerance of ambiguity. • Ability to develop and implement standard electrical and automation engineering practices. • Working knowledge of national, provincial, and local regulatory requirements in the areas of food safety, safety, environment and emergency management. • Proficiency reading and red-lining PI&D drawings. • Programming experience with Allen Bradley ControlLogix, CompactLogix and SLC500 PLCs, Siemens, Mitsubishi, etc. • Familiarity with Allen Bradley VFDs, ControlNet networks. • Proficiency working with SQL Server, Oracle, or other relational databases. • Proficiency with Visual Basic scripting. • Familiarity with Endress + Hauser instrumentation (flow meters, level transmitters, RTDs/temperature transmitters, level probes, etc.) • HMI or SCADA programming and configuration of any of the following software packages Wonderware, Rockwell, Factory Talk, Siemens, US Data, etc. SummaryIf this is the position for you, APPLY ONLINE or email resume to Mina Khalil at mina.khalil@randstad.caOnly qualified candidates will be contacted.Please visit www.randstad.ca for a complete list of opportunitiesRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Under the supervision of the Clinical Lab Lead Hand; the Finishes Goods Quality Control Laboratory Technician is responsible for: Duties and Responsibilities•Testing of cards •Testing of Readers •Testing of Capillary tubes•Routine performance checks including Adaptive Process Control, linearity, lifetimes, and validations •Assistance with testing requirements for Process Engineering, Test Engineering and R&D experimentsAssisting in routine upkeep and operational tasks related to the Clinical Lab AdvantagesKey tasks and activities will be completed with guidance and supervision from a higher-level technician or team leader:•Testing for various purposes (using written instructions) of card lots/readers/capillary tubes coming from the assembly departments. •Carries out routine maintenance and basic troubleshooting of clinical lab testing equipment and records these activities in maintenance logs with assistance and guidance form a higher-level technician.•Ability to track inventory of clinical lab supplies and replace what is in house and communicate to responsible personnel reorder points.•Participates in testing process and equipment improvement efforts, including experimental testing. Maintains appropriate records for testing.Percent of TimeFrequencyActivity50DailyProduction card Lot, Reader and Capillary tube testing, Analysis45DailyExperimental Lot Testing5Daily / WeeklyTest Equipment Maintenance / PhlebotomyResponsibilitiesDemands•Routine, detailed nature of testing•Flexibility required for varied nature of testing•Regular and reoccurring exposure to blood from screened donors•Flexibility with adjusting work hours to follow up with overnight shifts as scheduled•Attention to detail is vital•Proven ability to work and communicate effectively in a team environment while satisfying personal responsibilities•Ability to function in a fast-paced environment•Ability to organize and prioritize responsibilities and multi-task•Ability to assess and troubleshoot computers, software applications and equipment•Ready to speak up about concerns•Satisfaction derived from solid completion of tasks •Clear understanding of health and safety in a lab environment•PhysicaloManual dexterity oAbility to distinguish between coloursoCombination of sitting and standingoExtended periods of detailed visual inspectionoInvolves regular and recurring exposure to blood from screened donorsoWork involves inventorying and processing cards, which requires walking, bending, stretching and occasionally lifting boxes of up to 20lbsQualificationsSkills & Qualifications (Education and Experience)•Post-secondary education in a field of Science or related field, and/or combination of education and technical experience acceptable to Epocal•Proficient in using MS Office Suite (i.e. Excel, Word, PowerPoint) and capable in troubleshooting basic technological issues•Clinical laboratory experience such as blood testing, use of pipettes, centrifuges, and table-top analyzers is an asset•Some working knowledge of GMP and Good lab practices•Knowledge of basic statistics is preferred•Trained phlebotomist is considered an assetSummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.caThank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Are you a seasoned project management professional within the construction industry?Do you have knowledge or experience working directly with healthcare or medical clients?We are looking to hire a Project Manager with project management experience in external client-facing healthcare medical imaging in construction management, who could manage multi-million projects while managing lower budgets and a good understanding of construction drawings, in Halifax, NS.Advantagesone year extendable contractGlobal Brandcompetitive salaryOpen to hiring T4 or IncResponsibilities• Manage concurrent multiple projects of $1-5 MM in a fast-paced environment.• Create and maintain MS Project schedule and initiate corrective action when deviating from the schedule.• Provide revenue forecast with utmost accuracy to Sales and Finance.• Room planning in cooperation with the Planning Department, Account Manager and the customer.• Work with site-specific drawings, acting as the main point of contact for the architect, consultant, contractors and the customer as well as internal/external project resources.• Monitor site preparation and readiness along with managing the production, delivery, design-build, installation of the equipment and the applications training schedule.• Accurately complete and submit all documentation related to the project. Including but not limited to, Last Call letter, checklists, MS project schedule, any applicable Nonconformance cost forms, Change Orders, Clinical Handover, Site Readiness checklist, pipe acceptance checklist and pressure drop calculation.• Coordinate and manage all resources associated with the project including but not limited to, delivery/rigging team, mechanical installer, commissioning FSR, the applications specialist.• Substitute for and/or assist department staff and perform other duties as required.Qualifications• Bachelor’s degree in engineering, construction management, healthcare.• PMP (Project Management Professional) Certification or similar designation.• 5-10 years of demonstrated project management experience in external client-facing healthcare medical will be an asset.• Experience with MS Project, and other Microsoft Office applications including word processing, spreadsheet, and PowerPoint.• A familiarity with construction drawings and practices is a must.• Fluency in French and English is an asset.• Strong written and verbal communication skills to interact effectively with stakeholders.• Travel time is around 50%-75% of the time on project sites across Canada.SummaryIf you are interested in discussing this opportunity further then please send your resume directly to Swapna Nair at swapna.nair@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

One of our global Food Manufacturing clients has partnered with us in the search for a Deployment Planner to add to their planning department.Role – Deployment PlannerLocation – Toronto- Completely remoteIndustry - Food Manufacturing preferredRole- Contract for 3 Months with a possibility to extend or go permMUST have experience with SAP.If you are interested in this opportunity, please send your RESUME directly to Swapna Nair at swapna.nair@randstad.caAdvantagesOpportunity to work with one of the largest Food ClientAmple of growth opportunitiesResponsibilitiesDetermine deployment/redeployment of finished goods to manage Distribution Center Level Days of Supply by SKU and fulfillment of customer orders. •Accountable to achieve service level targets, ensure balanced inventory across the network, and minimize transportation costs •Create Stock Transfer Orders to deploy inventory and build truckload/railroad orders to minimize freight costs.•Resolve any dispatch or delivery time issues with warehousing or transportation.•Identify and assist in resolving slow-moving, aged, obsolete and discontinued finished goods items at all assigned warehouse locations. •Maintain accurate inventories of hold product and assist in disposition within policy guidelines. Assist with product recall, stock withdrawals and stock traces. •Review and recommend forecast adjustments to Demand Planning based on day-to-day experience in inventory management of SKUs. Work with Demand Planning to stay ahead of sales trends to ensure forecast accuracy and prevent customer shortages.Qualifications a candidate with 1 – 5 years of inventory management experience· someone who is driven, a hard worker, self sufficient and possess strong communication skills· an individual who can leverage help by utilizing internal staff members and is solution oriented· has the ability to determine deployment/redeployment of finished goods to manage Distribution Center Level Days of Supply by SKU and fulfillment of customer orders· can achieve service level targets, ensure balanced inventory across the network, and minimize transportation costs · resolve any delivery or diss-patch issues as they arise· ability to work on a team of roughly 30 staff· maintain accurate inventories of hold product and assist in disposition within policy guidelines. · other deliverables and requirements as listed on the job outline This is a remote working position, working hours are Monday to Friday 8:15 AM - 5:00 PM.SummaryIf you are interested in this opportunity, please send your resume directly to Swapna Nair at swapna.nair@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Project Manager- L2 - Infrastructure This is a Project Manager opportunity in BC. with the largest power distribution organization in British Columbia and been recognized for excellence and been named one of B.C.’s Top Employers and one of Canada’s Best Diversity Employers for four years in a row.AdvantagesThis is a full time, one year contract located in Burnaby, BC. We are looking for a Project Manager responsible for the successful completion of medium to high risk and highly complex infrastructure or other construction projects by leading cross-functional, multi-disciplinary teams through project activities so that projects are successfully completed safely, with quality, within budget, and on time.ResponsibilitiesProject Manager Infrastructure Responsibilities:• A minimum nine (9) years of project management experience or equivalent for infrastructure projects.• Must have experience in project management in a fast-pace environment•Must have experience with transmission lines and transmission project experience in the utility industry• Utilities industry experience is preferred, open to EPCM companies • Electrical Substation experience and PMP preferred• Experience with project closing• SAP and NERC knowledge is an asset• Experience managing projects for brownfield substations, specifically in feeder sections• Experience managing high volume programs (15+ simultaneous projects)• Must have experience managing multiple concurrent projects• Plan, direct, and report on infrastructure and other construction project activities by consistently monitoring project benefits, resources and status and creating documents such as project plans, action logs, communication plans, status reports and post implementation reviews so that the project is implemented as planned.• Develop project plans and risk management plans for medium to high risk and highly complex infrastructure or other construction projects with a capital cost that is generally up to $50 million for effective management throughout the project lifecycle.• Complete project management activities including scoping, planning, managing, monitoring, and reporting on project tasks by using advanced skills in Microsoft Office as well as project management programs • Maintain meaningful relationships with stakeholders including customers, engineers and field crews through regular communication using excellent verbal, written, and presentation skills enabling timely progression of projects.QualificationsProject Manager Infrastructure Skills and Qualifications:• Bachelor's degree in Engineering, Business, Economics or related discipline• Bachelor’s degree Engineering, an asset• Project Management Professional (PMP®) designation, preferred• Advanced MS Office skills (Word, Excel, PowerPoint, and Project)• Advanced English skills for a professional environment, written and spoken• Candidates located in the lower mainland is preferred.SummaryIf you would like to be considered for this Project Manager opportunity in BC. please forward your resume via email to Dora Pang, dora.pang@randstad.ca or call 236-334-4381.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

We are seeking a Senior Electrical Engineer opportunity in BC. with the largest power distribution organization in British Columbia and been recognized for excellence and been named one of B.C.’s Top Employers and one of Canada’s Best Diversity Employers for four years in a row.This is a full time one year contract located in Burnaby, BC. We are looking for a Project Manager responsible for the successful completion of medium to high risk and highly complex infrastructure or other construction projects by leading cross-functional, multi-disciplinary teams through project activities so that projects are successfully completed safely, with quality, within budget, and on time.AdvantagesThe Stations Maintenance–Generation Electrical team has an exciting opportunity for a Senior Electrical Engineer to do facility ratings updates and maintenance of rotating and reactive equipment.ResponsibilitiesSenior Electrical Engineer Responsibilities• This Electrical Engineer will facility ratings updates and maintenance of rotating and reactive equipment. • Must have 8 + years experience as an Engineer (electrical)• Must have substation experience • Must have valid class 5 drivers licence • Experience with Generators is an asset • Maintenance and Reliability engineering experience is an asset 6) Experience with Facility Ratings is an asset• Develop safe engineering solutions by using initiative and judgement to perform tasks including developing designs, analyzing and resolving problems, and interpreting engineering specifications on medium complexity and scope assignments for projects and operations.• Assist project or operations management to meet safety, cost, quality, and time objectives by proposing changes in plans and estimated costs, recommending payment for work completed by contractors, preparing progress reports, coordinating work schedules and other similar tasks.• Resolve highly technical and unusual design and field engineering problems by conducting independent studies and analysis, exercising independent judgment in selecting and interpreting information, recommending safe engineering designs to support successful operations and/or project completion • The work includes updates to facility rating drawings, maintenance, diagnostics, testing, repairs, failure investigation/analysis, inspections, condition assessments, equipment health rating (EHR) reviews and updates, maintenance program reviews, maintenance instructions, and preparation of standards, specifications and cost estimates of generating equipment (i.e. generators, rotating exciters, transformers, circuit breakers). Furthermore, the team is responsible for managing fleet-wide programs such as Arc Flash assessments and Ground Grid studies QualificationsSenior Electrical Engineer Skills and Qualifications:• Registered Professional Engineer (P.Eng.) or Professional Geoscientist (P.Geo.) with Engineers & Geoscientists BC or with another jurisdiction and eligible for registration as such with Engineers & Geoscientists BC• A Digital Sign and Seal Technology. You may be required to subscribe to a digital seal technology service offered by Notarius• Intermediate English skills for professional environment, written and spoken• Familiarity with CAD systems and drawing standards• Ability to use standard industry design/analysis software• Intermediate MS Office skills (Word, Excel, and PowerPoint)• This role requires experience with the design of electrical utility generation system and demonstrated experience working with utility design solutions a in an electric utility environment.• Prepare project documentation and deliverables in accordance with project and Engineering Design Practices (i.e. evaluation reports, specifications, proposals, estimates, design basis', calculations, hazard logs, test plans).• Prepare design work packages including scope, duration, and level of effort estimates.• Prepare signed/sealed engineering deliverables as a Professional of Record (PoR) in accordance with EGBC • Provide technical assistance and construction support in the field, and undertake field reviews as required by EGBC.• Prepare detailed designs and documentation for electrical systems and electrical equipment in generation stations in accordance with industry standards and practices* Root-cause analysis skills* Grounding (including switchyard grounding) and bonding* Arc FlashHydro and Turbo Generators* AC and DC Overvoltage Test* Power Factor / Dissipation Factor Test* Electromagnetic Core Imperfection Detection (ELCID) and Core Loop Test* Rotor Flux Test* Recurrent Surge Oscillation (RSO) and Surge Test* Partial Discharge Test* Stator Wedge Test* TC and VE Accelerated Aging TestDC Machines* Armature and Field TestsPower Transformers* Partial Discharge Test* Gas-In-Oil and Oil Quality Test* Power Factor TestGas-Insulated SwitchgearSummaryIf you would like to be considered for this Senior Electrical Engineer opportunity in BC. please forward your resume via email to Dora Pang, dora.pang@randstad.ca or call 236-334-4381.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Description:Responsible for establishing policies, processes, procedures for Engineering Utilization focusing on best practices for safe installation and operation of gas piping and appliance work downstream of the gas utility customer’s meter and includes references to CSA B149.1Responsibilities• Write policies, procedures, processes using established templates, and by facilitating feedback meetings with associated stakeholders.• Follow program controls and attain approvals from all associated stakeholders prior to submitting to Content Management for Publishing• Using project management principles, evaluate and prioritize activities required to meet deliverables and milestone dates• Track, monitor and communicate document progress updates against the project plan.Scope• Processes• Procedures• Engineering Approval• Project Management• ControlsContacts/Working Relationships• Engineering Internal Departments• Field Personnel & External Contractors• Content Management Representatives• Operations Governance Representatives• Technical TrainersRequired:• EIT or CET Degree (preferably Mechanical);• Experience in the development of documentation including field work process and procedures• Technical experience related to residential/commercial natural gas pipe installation and gas-fired appliances• CSA B149.1 associated experience, policy and procedures coupled with an understanding of applicable regulatory codes and safety matters.• Able to independently and effectively manage projects with varying complexities requiring the application of engineering principles and business components.• Strong communication, customer service, inter-personal, organizational, conflict resolution and project management skills.• Able to manage and prioritize multiple deliverables at one time.Preferred:• PMP designation or associated experience is a plusPlease send your resume in confidence to paul.dusome@randstad.ca Advantages• CSA B149.1 associated experience, policy and procedures coupled with an understanding of applicable regulatory codes and safety matters.• Able to independently and effectively manage projects with varying complexities requiring the application of engineering principles and business components.ResponsibilitiesDescription:Responsible for establishing policies, processes, procedures for Engineering Utilization focusing on best practices for safe installation and operation of gas piping and appliance work downstream of the gas utility customer’s meter and includes references to CSA B149.1Responsibilities• Write policies, procedures, processes using established templates, and by facilitating feedback meetings with associated stakeholders.• Follow program controls and attain approvals from all associated stakeholders prior to submitting to Content Management for Publishing• Using project management principles, evaluate and prioritize activities required to meet deliverables and milestone dates• Track, monitor and communicate document progress updates against the project plan.Scope• Processes• Procedures• Engineering Approval• Project Management• ControlsContacts/Working Relationships• Engineering Internal Departments• Field Personnel & External Contractors• Content Management Representatives• Operations Governance Representatives• Technical TrainersRequired:• EIT or CET Degree (preferably Mechanical);• Experience in the development of documentation including field work process and procedures• Technical experience related to residential/commercial natural gas pipe installation and gas-fired appliances• CSA B149.1 associated experience, policy and procedures coupled with an understanding of applicable regulatory codes and safety matters.• Able to independently and effectively manage projects with varying complexities requiring the application of engineering principles and business components.• Strong communication, customer service, inter-personal, organizational, conflict resolution and project management skills.• Able to manage and prioritize multiple deliverables at one time.Preferred:• PMP designation or associated experience is a plusPlease send your resume in confidence to paul.dusome@randstad.ca Qualifications• EIT or CET Degree (preferably Mechanical);• Experience in the development of documentation including field work process and procedures• Technical experience related to residential/commercial natural gas pipe installation and gas-fired appliances• CSA B149.1 associated experience, policy and procedures coupled with an understanding of applicable regulatory codes and safety matters.SummaryDescription:Responsible for establishing policies, processes, procedures for Engineering Utilization focusing on best practices for safe installation and operation of gas piping and appliance work downstream of the gas utility customer’s meter and includes references to CSA B149.1Responsibilities• Write policies, procedures, processes using established templates, and by facilitating feedback meetings with associated stakeholders.• Follow program controls and attain approvals from all associated stakeholders prior to submitting to Content Management for Publishing• Using project management principles, evaluate and prioritize activities required to meet deliverables and milestone dates• Track, monitor and communicate document progress updates against the project plan.Scope• Processes• Procedures• Engineering Approval• Project Management• ControlsContacts/Working Relationships• Engineering Internal Departments• Field Personnel & External Contractors• Content Management Representatives• Operations Governance Representatives• Technical TrainersRequired:• EIT or CET Degree (preferably Mechanical);• Experience in the development of documentation including field work process and procedures• Technical experience related to residential/commercial natural gas pipe installation and gas-fired appliances• CSA B149.1 associated experience, policy and procedures coupled with an understanding of applicable regulatory codes and safety matters.• Able to independently and effectively manage projects with varying complexities requiring the application of engineering principles and business components.• Strong communication, customer service, inter-personal, organizational, conflict resolution and project management skills.• Able to manage and prioritize multiple deliverables at one time.Preferred:• PMP designation or associated experience is a plusPlease send your resume in confidence to paul.dusome@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Our client in Burlington has partnered with Randstad Engineering in their search for an Inventor CAD Drafter to join their growing, but established, construction team! In this role, you will be responsible for designing infrastructure and design-build projects, working with designers, engineers and project managers to produce complete drawing deliverables.AdvantagesThis is a permanent opportunity with a specialized heavy construction and engineering organization that is focused on positive working relationships, and a high caliber of professional service; Offering a competitive salary, performance bonuses, RRSP Matching Program, Benefits, Vacation and WFH Flexibility.Responsibilities• Coordinate with engineers, shop and construction operations to meet fabrication and constructability requirements• Develop reinforced concrete drawings based on design provided by engineers• Develop mechanical drawings based on contractual requirements• Develop annotative details and sections• Mentor junior staffQualifications• High proficient use of Autodesk Inventor• Experienced with structural steel, steel plate and mechanical design.• Understanding of engineering principles, assembly, fabrication, and construction• Strong knowledge and experience with parametric modelling including skeletal and use of Frame Generator• Proficient use of AutoCAD• Experience with using Vault / PDM softwareSummaryIf you are interested in this opportunity please email lindsay.lambert@randstad.ca and apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Our client in the construction / mining industry located in North York is looking for a Senior Buyer to add to their team. Reporting to the Manger of Procurement , the ideal candidate will be required to drive best practices in procurement as well as develop and execute total cost savings strategies. This is a hybrid role where you will be required to work both in office and remote. Advantages- Full time work- Competitive salary- Benefits package- Annual bonuses- Hybrid role (work from home and office)Responsibilities- Look for innovative ways on how to reduce total cost and enhance value - Planning, managing and coordinating sourcing and procurement of materials, equipment and supplies - Managing and organizing shipments (understanding of Incoterms 2020) / Importing and exporting- Work with the Manager on ways to standardize compliance of the procedure to pay process- RFQ (Request for Quotation) - sound understanding of how bidders lists work, RFQ preparation and administration, commercial negotiation with bidders, including PO's, terms and conditions, discounts, and delivery schedule - Preparation of PO documentation for award, assurance of compliance, PO day to day administration, PO closeout, including settlement of backcharges Qualifications- Bachelors Degree- Previous experience working as a Senior Buyer, preferably in the construction or engineering mining industry- 5+ years of experience in procurement, materials purchasing, supply chain- Knowledge and ability to train procurement policies and best practices to non-procurement professionals - Analytical with solid proficiency in Excel. Knowledge of procure to pay systems, processes, and associated ERPs (Microsoft Dynamics AX) preferred- CPSM, CPM or equivalent certificates preferred that help demonstrate proficiency in Procurement and Strategic SourcingSummaryIf this is something you are interested in please submit your resume or send it to Paulina Galinski - paulina.galinski@randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Our client that is in the cannabis industry, located in St Thomas is looking to add an Operations Lead. The ideal candidate will be someone who has 7-10 years of experience managing a team preferably in the cannabis, agribusiness, brewing or food industry. Reporting to the Operations VP, the selected candidate will be in charge of planning, directing, organizing, coordinating, and leading the Manufacturing Team. Advantages- Full time Hours- Stock Options- Competitive Salary- Benefits Package - Exposure to a new up and coming industry of CannabisResponsibilities- Plan, organize, direct, manage, and evaluate the operations of the manufacturing department- Develop and implement operating policies and procedures- Review production costs and quality, modify production and inventory control programs and maintain and enhance profitable operation of the plant- Establish and monitor overall plant performance for production, scrap, quality standards, on time delivery, & profitability- Troubleshoot and resolve operational, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays- Identify and coordinate improvements in the operations area necessary to meet the variance commitments for the plant and cost objectives. Ensure that cost gaps are identified, action plans developed, and adequate resources allocated to meet all financial objectives- Develop and maintain a working knowledge of the Quality Management System, Manufacturing Processes and all relevant SOP’s and apply appropriatelyQualifications- A minimum 7 to 10 years’ progressive management experience with more than 5 years in a significant production management role preferably in either an agribusiness, brewing environment, or similar industry; or any equivalent combination of experience and education- Comprehensive knowledge of Good Manufacturing Practices and/or Good Production Practices- Demonstrated ability to instill a culture of high performance, accountability, and quality- Demonstrated interpersonal savvy and relationship management/networking skills- Strong ability to deal with ambiguity and manage through difficult situations- Knowledge of and experience in LEAN Manufacturing and Key Process Indicators (KPI’s), preference being given to experience in agribusiness- Experience with Hazard Awareness & Critical Control Points (HACCP) and Global Food Safety Initiative (GFSI) systems would be an asset- Must have the ability to obtain A/RPIC status as per Health Canada Access to Cannabis for Medical Purposes RegulationsSummaryIf this is something you are interested in please submit your resume. We thank all applicants! Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Our client in Burlington, ON has partnered with Randstad Engineering in their search for a Manager of Civil Engineering to join their growing team! This position will manage and support the current civil design and project team in relation to storm and sanitary sewer design, water distribution system design, detailed grading analysis, and storm water management design.AdvantagesThis is a permanent opportunity with a full service engineering organization that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, performance bonuses, RRSP Matching Program, Benefits, Vacation and WFH Flexibility.Responsibilities•Responsible for technical report writing to support the consulting work performed •Day to day management of Civil Engineering staff•Provide mentoring and guidance to team members•Provide technical assistance and input on projects, for the purpose of ensuring delivery of a consistent, quality product to the client•Provide design and constructability feedback and suggestions; perform land development design and analysis to meet client requirementsQualifications•Civil Engineering Degree•10+ years of relevant experience in both Project and People Management•P. Eng Designation•Strong knowledge of engineering principals and design standards•Working knowledge of MS Office software, including Outlook, Excel and WordSummaryIf you are interested in this opportunity please email lindsay.lambert@randstad.ca and apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Our client in Kitchener, ON has partnered with Randstad Engineering in their search for a Ontario Land Surveyor - Division Manager, to join their growing team! This position will manage and support the current OLS Team, develop and execute annual business plans, monitor financial performance including revenue, gross margin and income for the division.AdvantagesThis is a permanent opportunity with a full service engineering organization that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, performance bonuses, RRSP Matching Program, Benefits, Vacation and WFH Flexibility.Responsibilities•Responsible for technical report writing to support the consulting work performed •Day to day management of Ontario Land Survey staff•Provide mentoring and guidance to team members•Provide technical assistance and input on projects, for the purpose of ensuring delivery of a consistent, quality product to the client•Provide design and constructability feedback and suggestions; perform land development design and analysis to meet client requirementsQualifications•Civil Engineering Degree or Geomatics Engineering Degree•10+ years of relevant experience in both Project and People Management•OLS Licensed•Strong knowledge of engineering principals and design standards•Working knowledge of MS Office software, including Outlook, Excel and WordSummaryIf you are interested in this opportunity please email lindsay.lambert@randstad.ca and apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Our client in London, ON has partnered with Randstad Engineering in their search for a Project Manager for their Civil Engineering division to join their growing team! This role will be responsible to managing and coordinating in the areas of planning, execution and delivery of land and site development projects.AdvantagesThis is a permanent opportunity with a full service engineering organization that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, performance bonuses, RRSP Matching Program, Benefits, Vacation and Flexibility.Responsibilities•Responsible for the planning, executing and delivery of land development and civil engineering projects, ensuring the project is within budget and on schedule while managing the clients’ expectations;•Manage day-to-day client interactions, communicate effectively with clients and internal/external project teams, and continually seek opportunities to increase client satisfaction;•Managing project execution by providing direction to the project team, appropriately scheduling time and acting as main point of contact between internal and external project teams;•Procure new projects and clients by identifying business development opportunities, understanding industry and development in the City of London and the London area, leading proposal efforts including completing project scoping and RFP assessments;•Managing project financials including invoicing, progress payment certificates, collecting accounts receivables and managing project budgets Qualifications• Civil Engineering Degree or in related field• 6+ years of experience in a similar role• P.Eng or C.E.T Designation• Strong knowledge of engineering principals and design standards• Working knowledge of MS Office software, including Outlook, Excel and Word• Familiarity with various civil design software – AutoCAD, Civil3DSummaryIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Do you have a background in Customs Compliance and RegulationDo you have a CIFFA certificate or are in the middle of completing it?If so, this could be the opportunity for Our team is growing again to meet customer demand! Seeking applicants for immediate openings.We are built on experienced staff with a clear understanding of what is expected, the precautions needed, and the absolute care required when handling shipments. This position requires demonstrated knowledge of the international shipping industry and customs processes as well as exceptional customer service to high-profile clients. You will be required to be proactive and coordinate with international parties, operations departments, and clients to ensure successful project completion.You must be proactive with clients and operations to ensure seamless project management, and immediately communicate any changes that may arise to stakeholders.AdvantagesWork with a large, growing, multinational organizationStart as a contract but can lead to permanent opportunityResponsibilities• Prepare shipping documentation, and work closely with International customs brokerage, warehouse and road transport departments.• Build and maintain excellent, direct working relationship with the client and carriers.• Create, maintain and adhere to client Standard Operating Procedures (SOPs) and Exceptions to Standard Procedures (ESPs).• Provide support, guidance and mentoring to Release Operations members to ensure accurate release and rating activities are completed to achieve service levels.• Work directly with clients/carriers to obtain missing documentation, information and/or instructions.• Works directly with Customs and PGAs (Partner Government Agency) as necessary.• Participate fully with other team members in the day-to-day operations of the team, including setting priorities, organizing and scheduling work, coordinating with others, problem solving and decision-making, participating in meetings and handling special projects.• Perform other related duties as assigned by management. Adhere to established policies and procedures.• Schedule & coordinate shipment bookings with clients with a focus on international moves.• Work with and provide support to senior fine arts staff & management.• Handle all emails and calls with authority and professionalism.• Work in a fast-paced environment, keeping acute attention to detail.Qualifications• 3+ years of experience with a strong understanding of the International freight forwarding business – air, ocean, and over the road experience required.• CIFFA certification is a must, CITT and/or DG certification an asset.• Comprehensive understanding of operational procedures regarding International and domestic air transport, ocean transport, and international import/export process.• Knowledge of permits, international import/export restrictions as related to client projects.• Excellent computer skills (Microsoft Office suite, database experience, etc.)• Able to take charge, make decisions and positively manage change as and when needed.• Understanding best practices for the handling and transporting needs, with a focus on the customer demand.• Ability to work both independently and collaboratively• Strong administrative and organizational capabilities; attention to detail is an ABSOLUTE MUST.• Excellent understanding of customer needs – particularly within the international freight forwarding industry.• Outstanding communication, interpersonal and negotiation skills.• Excellent analytical and problem-solving skillsSchedule:• Regular working hours apply for this position; however, working beyond these hours may be required by business needs.Language Skills:• English is the principal language for this position. This position requires good written and verbal communication skills and the ability to communicate effectively in a diversemulticultural environment.**Interviews are to be conducted as applications are received. Position based in Brampton, ON or Pointe Claire QC depending on Candidate locationSummaryApply Online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Our client in Kitchener, ON has partnered with Randstad Engineering in their search for a Mechanical Design Engineer to join their growing team! This role will include support in the design, planning, execution and delivery of design-build commercial, industrial construction projects with the Greater Toronto Area.AdvantagesThis is a permanent opportunity with a specialized ICI construction and engineering organization that is focused on positive working relationships, and a high caliber of professional service; Offering a competitive salary, bonuses,, Benefits, and paid Vacation.Responsibilities· Provide technical and administrative support through all phases of projects.· Perform field reviews and participate in construction site meetings.· Work with project team to ensure timely project completion.· Understanding of mechanical equipment and design of mechanical systems.· Review and comprehend relevant Codes and Standards and design calculations.· Prepare reports, drawings and specifications.Qualifications· Knowledge of plumbing, HVAC, fire protection, power distribution, lighting, life safety, communications, IT and security.· Graduate of a diploma program in the field of engineering or construction - P.Eng an asset but not required.· Experience with AutoCAD and Revit/BIM software.· Team player consistently able to meet deadlines, with a strong ability to prioritize.· Maintain a valid Ontario driver’s license.SummaryIf you are interested in this opportunity please email lindsay.lambert@randstad.ca with your resume and apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Our client in London ON is looking for a Project Manager to join their growing team, this is a permanent full-time position.As the Commercial Project Manager, you will oversee the product commercialization process for the full organization. This includes facilitating product commercialization and gate approval meetings with the leadership team and driving continuous improvement in the way new product launches are executed to meet the targets and objectives.AdvantagesThis position competes within a dynamic environment and its commercialization agenda must be able to react quickly to changing customer, consumer and internal needs. As a result, the category project portfolio covers a broad array of long term strategic and short-term tactical initiatives.This individual will interface extensively with key stakeholders of all levels of leadership and across multiple functions including Marketing, Sales, R&D, Finance, and all functions within supply chain to deliver projects on time and within cost and quality parameters.Responsibilities• Oversee and manage the end-to-end execution of medium to high complexity projects. Manage cross-functional stakeholders to collect their inputs and commitments to deliver on time innovation and renovation projects.• Facilitate project kick off meetings with functional stakeholders and put in place best practice guidelines for defining project scope, timeline, complexity, and resource needs impacting launch feasibility.• Facilitate weekly site meetings to enable discussion on new product commercialization readiness and secure approval to progress gates.• Drive the implementation of line extension pipeline and management tools to ensure all critical projects are properly classified, scoped and relevant assumptions are properly defined, documented, and communicated to stakeholders.• Own and manage multi work-stream timelines through the project lifecycle, collaborating with working groups and budget owners to facilitate delivery of overall projects on time.• Lead cross-functional operational teams in the execution of strategic and highly complex projects to meet revenue, volume, growth, productivity and quality goals and priorities across multiple business units.• Engage the Project Commercialization team in continuously assess opportunities to improve the effectiveness and efficiency of the product commercialization.• Lead cross functional team deep dives to identify and address process inefficiencies. Employ standardized PDCA and root causes analysis frameworks to identify the key issues, develop detailed project plans and impactful solutions to be communicated to senior stakeholders.• Leverage change management best practices to drive implementation of new processes and facilitate cross functional buy-in from stakeholders of all levels.• Leadership and support for continuous improvement initiatives and projects.• Participates in other Supply Chain projects and listings process as required.• Foster Vendor Relationships (e.g. print, agency, operations, etc).Qualifications• Extensive project management knowledge.• Bachelor’s degree required (accounting/finance, marketing, logistics, engineering, quality, operations).• Minimum 5 years’ experience.• Competence: Organization skills with high attention to detail and ability to thrive in a fast‐paced environment and manage multiple priorities and tasks simultaneously necessary.• Collaboration: Experience in getting teams together, identifying new processes, procedures, and driving change within an organization.• Project Coordinator certification, or working towards CAPM® designation is preferred• Demonstrated ability to communicate with colleagues and stakeholders from diverse professional backgrounds.• Computer literacy and advanced Excel skills required. Experience with project planning software (e.g. Smartsheet, MS Project) preferred.• Strong and competent decision-making: assess situations to determine the importance, urgency and risks, and make clear decisions which are timely and in the best interests of the organization.SummaryIf this is the position for you, APPLY ONLINE or email resume to Mina Khalil at mina.khalil@randstad.caOnly qualified candidates will be contacted.Please visit www.randstad.ca for a complete list of opportunitiesRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

Responsibilities: Working closely with project engineers on equipment design, layout design and piping design.Evaluating, selecting, specifying all mechanical components during design process.Creating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.Participating in design reviews and providing resource information and design input.Generating and updating detail engineering documents by using Autodesk Inventor and other 2D and 3D tools for part drawings, assembly drawings, layout drawings, bill of material and equipment manuals.Work on multiple projects and accountable for schedule on assigned projects.Qualifications: Minimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.AdvantagesCreating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.ResponsibilitiesResponsibilities: Working closely with project engineers on equipment design, layout design and piping design.Evaluating, selecting, specifying all mechanical components during design process.Creating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.Participating in design reviews and providing resource information and design input.Generating and updating detail engineering documents by using Autodesk Inventor and other 2D and 3D tools for part drawings, assembly drawings, layout drawings, bill of material and equipment manuals.Work on multiple projects and accountable for schedule on assigned projects.Qualifications: Minimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.QualificationsMinimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.SummaryResponsibilities: Working closely with project engineers on equipment design, layout design and piping design.Evaluating, selecting, specifying all mechanical components during design process.Creating conceptual designs and detailed designs which may include material handling equipment, plant layouts and piping layout, and incorporating engineering changes into existing designs.Collaborating with internal teams, suppliers and other vendors on technical issues, ensuring engineering designs and product standards are maintained throughout the designing process.Participating in design reviews and providing resource information and design input.Generating and updating detail engineering documents by using Autodesk Inventor and other 2D and 3D tools for part drawings, assembly drawings, layout drawings, bill of material and equipment manuals.Work on multiple projects and accountable for schedule on assigned projects.Qualifications: Minimum 3 years engineering experience on mechanical equipment design and drawing preparation.A Bachelor’s Degree in Mechanical Engineering or equivalentProficient and hands-on experience in 2D drafting and 3D modeling by using AutoCAD and Inventor.Familiarity with any of the following tools is considered an asset: AutoCAD Plant 3D, Navisworks, ReCap, Autodesk Vault, CAESAR IIMaterial handling or heavy machinery design experience would be an asset.Knowledge of piping design standards and experience in piping layout design would be an asset.Ability to function and complete tasks independently with minimal supervision.Demonstrated attention to detail and accuracy, excellent on drafting technique and practice including GD&T.Proficient with MS Office.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.