thank you for subscribing to your personalised job alerts.

    7 jobs found for developer

    filter1
    clear all
      • London, Ontario
      • Contract
      Opportunity for an Integrated Logistic Support Analyst/Engineer in a 12 month full time contract with the guidance of a Team Leader and/or Subject Matter Expert perform one of the following Integrated Project Team roles;Provisioning/Parts Content Developer/Writer:•Receive, organize, and document system specifications, engineering drawings, bill of materials, and vendor data•Document the physical breakdown of the vehicle, assembly and/or subsystem(s) in accordance with applicable standards and approved customer maintenance concept•Document and maintain the parts data in the Logistics Support Analysis Record database•Develop/write procedures as part of overall development of technical manuals for vehiclesMaintenance Engineering Content Developer/Writer:•Analyze vehicle system functionality and identify probable failure modes that could impact system performance/safety•Identify and recommend specials tools and test equipment that the customer may require in order to effectively support their vehicles•Write clear, step-by-step maintenance instructions describing to clients how to remove, repair and replace vehicle system components and assemblies•Develop/write procedures as part of overall development of technical manuals for vehiclesDiagnostics Engineering Content Developer/Writer:•Analysis of electrical, hydraulic and mechanical system functionality to determine most efficient troubleshooting methodology (perform Fault Tree Analysis and/or Failure Mode Effect Analysis of system/component)•Support development of fault insertion tools and non-destructive faults for use in validation of troubleshooting procedures•Develop/write procedures as part of overall development of technical manuals for vehicles Support and/or potentially perform the following functions:•Read and interpret engineering blueprints and subcontractor data•Generate accurate illustration requests to support procedure development•Maintain the configuration and revision of the data in the database as well as all supporting documents•Proactively support and communicate with other Engineering teams and departments•Assist with aftermarket support requests•Plan and track progress of assigned activities Attend fit-ups as required Position Requirements •Completed University Degree or College Diploma in a technical discipline•1 to 3 years relevant experience•Knowledge in the operation, maintenance and integration of vehicle components and systems•Demonstrated high levels of written and oral communications skills, interpersonal and organizational skills•Ability to travel internationally and possess/be able to acquire and maintain a valid passportPreferred Qualifications:•Proficient knowledge in the operation, maintenance and integration of vehicle components and systems•Experience with VisMockup (Team Center Visualization) and Arbortext or other XML editing softwareLondon ONCompensation is $24.00 to $30.00/hour OT after 40 hrs in a weekIf you have the necessary qualifications to excel in this position, please apply online.Questions? I can be reached at 519-679-7539 or dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.RESPONSIBILITIESQUALIFICATIONS
      Opportunity for an Integrated Logistic Support Analyst/Engineer in a 12 month full time contract with the guidance of a Team Leader and/or Subject Matter Expert perform one of the following Integrated Project Team roles;Provisioning/Parts Content Developer/Writer:•Receive, organize, and document system specifications, engineering drawings, bill of materials, and vendor data•Document the physical breakdown of the vehicle, assembly and/or subsystem(s) in accordance with applicable standards and approved customer maintenance concept•Document and maintain the parts data in the Logistics Support Analysis Record database•Develop/write procedures as part of overall development of technical manuals for vehiclesMaintenance Engineering Content Developer/Writer:•Analyze vehicle system functionality and identify probable failure modes that could impact system performance/safety•Identify and recommend specials tools and test equipment that the customer may require in order to effectively support their vehicles•Write clear, step-by-step maintenance instructions describing to clients how to remove, repair and replace vehicle system components and assemblies•Develop/write procedures as part of overall development of technical manuals for vehiclesDiagnostics Engineering Content Developer/Writer:•Analysis of electrical, hydraulic and mechanical system functionality to determine most efficient troubleshooting methodology (perform Fault Tree Analysis and/or Failure Mode Effect Analysis of system/component)•Support development of fault insertion tools and non-destructive faults for use in validation of troubleshooting procedures•Develop/write procedures as part of overall development of technical manuals for vehicles Support and/or potentially perform the following functions:•Read and interpret engineering blueprints and subcontractor data•Generate accurate illustration requests to support procedure development•Maintain the configuration and revision of the data in the database as well as all supporting documents•Proactively support and communicate with other Engineering teams and departments•Assist with aftermarket support requests•Plan and track progress of assigned activities Attend fit-ups as required Position Requirements •Completed University Degree or College Diploma in a technical discipline•1 to 3 years relevant experience•Knowledge in the operation, maintenance and integration of vehicle components and systems•Demonstrated high levels of written and oral communications skills, interpersonal and organizational skills•Ability to travel internationally and possess/be able to acquire and maintain a valid passportPreferred Qualifications:•Proficient knowledge in the operation, maintenance and integration of vehicle components and systems•Experience with VisMockup (Team Center Visualization) and Arbortext or other XML editing softwareLondon ONCompensation is $24.00 to $30.00/hour OT after 40 hrs in a weekIf you have the necessary qualifications to excel in this position, please apply online.Questions? I can be reached at 519-679-7539 or dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.RESPONSIBILITIESQUALIFICATIONS
      • London, Ontario
      • Contract
      Embedded Developer, Advanced Product and TechnologyAre you an Embedded Developer looking to join a growing and stable team in an exciting 12 month contract, full time hours opportunity? Monday to Friday, DAY shift in the London area.Job Responsibilities•Work with Controls team to take Matlab models to final code-base•Create structured, well-documented, object-oriented, modern code•Strong desire to work within a robust test environment•Project build from concept through requirements and design before code is written•Code implementation through pragmatic application of loose and strict requirements•High level of expertise and/or interest in code repositories, versioning, & coding standards•Design and develop efficient embedded applications using C/C++.•Development using platforms including Window CE/Embedded and Linux•Participate in peer and design reviews•Build applications for State Machine Position Requirements •Bachelor of Computer Science or Computer Engineering or similar. Candidates with exceptional relevant experience will also be considered.•Minimum 5 years of professional embedded software development (x86/64 and ARM)•Demonstrated expertise in C/C++•Experience with Unified Modeling Language (UML) design and/or model driven development•Experience with serial protocols for communication and logging•Testing and debugging skills•Knowledge of vehicle communication network protocols (SAE J1939, TCP/IP, UDP)•Ability to participate in concept, UI, and feature development•Aptitude in hardware selection•Matlab / Simulink experience•Architecture, design, implementation, and deployment•Full SDLC experience•Two or more of Microsoft Visual Studio, Code Warrior, Eclipse, etc•Build Automation•Git and Bitbucket•Ability to travel (5% Cdn) and (5% US & Int'l) and possess/be able to acquire and maintain a valid passport•Must have or be able to obtain and maintain Secret Level clearance.•Development experience in the below areas:oControl theory / MechatronicsoMotoHawkoGood experience in LinuxoReal-time systemsoVehicle systemsoSafety Critical Systems – (i.e. ISO 26262/MISRA)oCyber Security – (i.e. SAE J3061)oAgile, V-Model, Atlassian SuiteoDevelopment experience with Qt, Xamarin Forms, Windows FormsPosition location - London ONCompensation - $28.00 to $44.00/hour OT after 40 hoursIf you have the necessary qualifications to excel in this position, please apply online.Questions? I can be reached at 519-679-7539 or dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.RESPONSIBILITIESQUALIFICATIONS
      Embedded Developer, Advanced Product and TechnologyAre you an Embedded Developer looking to join a growing and stable team in an exciting 12 month contract, full time hours opportunity? Monday to Friday, DAY shift in the London area.Job Responsibilities•Work with Controls team to take Matlab models to final code-base•Create structured, well-documented, object-oriented, modern code•Strong desire to work within a robust test environment•Project build from concept through requirements and design before code is written•Code implementation through pragmatic application of loose and strict requirements•High level of expertise and/or interest in code repositories, versioning, & coding standards•Design and develop efficient embedded applications using C/C++.•Development using platforms including Window CE/Embedded and Linux•Participate in peer and design reviews•Build applications for State Machine Position Requirements •Bachelor of Computer Science or Computer Engineering or similar. Candidates with exceptional relevant experience will also be considered.•Minimum 5 years of professional embedded software development (x86/64 and ARM)•Demonstrated expertise in C/C++•Experience with Unified Modeling Language (UML) design and/or model driven development•Experience with serial protocols for communication and logging•Testing and debugging skills•Knowledge of vehicle communication network protocols (SAE J1939, TCP/IP, UDP)•Ability to participate in concept, UI, and feature development•Aptitude in hardware selection•Matlab / Simulink experience•Architecture, design, implementation, and deployment•Full SDLC experience•Two or more of Microsoft Visual Studio, Code Warrior, Eclipse, etc•Build Automation•Git and Bitbucket•Ability to travel (5% Cdn) and (5% US & Int'l) and possess/be able to acquire and maintain a valid passport•Must have or be able to obtain and maintain Secret Level clearance.•Development experience in the below areas:oControl theory / MechatronicsoMotoHawkoGood experience in LinuxoReal-time systemsoVehicle systemsoSafety Critical Systems – (i.e. ISO 26262/MISRA)oCyber Security – (i.e. SAE J3061)oAgile, V-Model, Atlassian SuiteoDevelopment experience with Qt, Xamarin Forms, Windows FormsPosition location - London ONCompensation - $28.00 to $44.00/hour OT after 40 hoursIf you have the necessary qualifications to excel in this position, please apply online.Questions? I can be reached at 519-679-7539 or dawn.urbanowicz@randstad.caWhile we at Randstad Engineering appreciate all applicants who apply, only those selected for a preliminary interview will be contacted.RESPONSIBILITIESQUALIFICATIONS
      • Etobicoke, Ontario
      • Permanent
      Our client, is a world-class developer and manufacturer of next-generation Building Integrated Photovoltaic (BIPV) Cladding Systems for buildings and large structures. They believe that all vertical surface areas of buildings should be able to generate clean solar energy at a competitive price. Their patented, customizable "solar" cladding and glass panels are doing just that—effectively competing against existing non-solar cladding and glass solutions. What they are doing is helping to quickly move the world toward a sustainable future, one building at a time. Do you share our vision, passion, and drive to help reverse climate change? If so, then this is the place for you.They are an equal opportunity employer with a great company culture. The successful candidate will join their team in Etobicoke, and report to the group’s R&D Manager.ADVANTAGESThis is a permanent opportunity that offers a competitive compensation package and an excellent opportunity for growth!- Competitive Base salary - Annual Bonus- RRSP- Wellness programs- 2 Weeks vacation- Health & Dental RESPONSIBILITIES- Research different glass coatings using CVD techniques (or other thin-film technologies)- Investigate different glass/ceramic compositions which can be used in photovoltaics- Develop glass laser welding tools for bonding glass to glass or glass to metal - Optimize tempering/edge finish processes to increase durability- Implement acid wash procedures to texture glassQUALIFICATIONS- 2-3 years eperience- Experience working with glass- Background in thin-film Chemical Vapour Deposition(CVD), photovoltaics, material science, chemical/mechanical engineering, nanotechnology and/or related fields- Knowledge of multiple disciplines as they apply to solar energy and cladding technologies- Must be creative, analytical and be able to solve problems SUMMARYIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.
      Our client, is a world-class developer and manufacturer of next-generation Building Integrated Photovoltaic (BIPV) Cladding Systems for buildings and large structures. They believe that all vertical surface areas of buildings should be able to generate clean solar energy at a competitive price. Their patented, customizable "solar" cladding and glass panels are doing just that—effectively competing against existing non-solar cladding and glass solutions. What they are doing is helping to quickly move the world toward a sustainable future, one building at a time. Do you share our vision, passion, and drive to help reverse climate change? If so, then this is the place for you.They are an equal opportunity employer with a great company culture. The successful candidate will join their team in Etobicoke, and report to the group’s R&D Manager.ADVANTAGESThis is a permanent opportunity that offers a competitive compensation package and an excellent opportunity for growth!- Competitive Base salary - Annual Bonus- RRSP- Wellness programs- 2 Weeks vacation- Health & Dental RESPONSIBILITIES- Research different glass coatings using CVD techniques (or other thin-film technologies)- Investigate different glass/ceramic compositions which can be used in photovoltaics- Develop glass laser welding tools for bonding glass to glass or glass to metal - Optimize tempering/edge finish processes to increase durability- Implement acid wash procedures to texture glassQUALIFICATIONS- 2-3 years eperience- Experience working with glass- Background in thin-film Chemical Vapour Deposition(CVD), photovoltaics, material science, chemical/mechanical engineering, nanotechnology and/or related fields- Knowledge of multiple disciplines as they apply to solar energy and cladding technologies- Must be creative, analytical and be able to solve problems SUMMARYIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.
      • Etobicoke, Ontario
      • Permanent
      Our client, is a world-class developer and manufacturer of next-generation Building Integrated Photovoltaic (BIPV) Cladding Systems for buildings and large structures. They believe that all vertical surface areas of buildings should be able to generate clean solar energy at a competitive price. Their patented, customizable "solar" cladding and glass panels are doing just that—effectively competing against existing non-solar cladding and glass solutions. What they are doing is helping to quickly move the world toward a sustainable future, one building at a time. Do you share our vision, passion, and drive to help reverse climate change? If so, then this is the place for you.They are an equal opportunity employer with a great company culture. The successful candidate will join their team in Etobicoke, and report to the group’s R&D Manager.ADVANTAGESThis is a permanent opportunity that offers a competitive compensation package and an excellent opportunity for growth!RESPONSIBILITIESRESPONSIBILITIES:- Help to develop new solar panel products for the construction industry- Development of the glass component of our solar panel prototypes for testing, and production.- Work with our R&D team and senior management for product development, planning and production. QUALIFICATIONSRESPONSIBILITIES:- 5-7 years of experience in a similar field- Help to develop new solar panel products for the construction industry- Development of the glass component of our solar panel prototypes for testing, and production.- Work with our R&D team and senior management for product development, planning and production. SUMMARYIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.
      Our client, is a world-class developer and manufacturer of next-generation Building Integrated Photovoltaic (BIPV) Cladding Systems for buildings and large structures. They believe that all vertical surface areas of buildings should be able to generate clean solar energy at a competitive price. Their patented, customizable "solar" cladding and glass panels are doing just that—effectively competing against existing non-solar cladding and glass solutions. What they are doing is helping to quickly move the world toward a sustainable future, one building at a time. Do you share our vision, passion, and drive to help reverse climate change? If so, then this is the place for you.They are an equal opportunity employer with a great company culture. The successful candidate will join their team in Etobicoke, and report to the group’s R&D Manager.ADVANTAGESThis is a permanent opportunity that offers a competitive compensation package and an excellent opportunity for growth!RESPONSIBILITIESRESPONSIBILITIES:- Help to develop new solar panel products for the construction industry- Development of the glass component of our solar panel prototypes for testing, and production.- Work with our R&D team and senior management for product development, planning and production. QUALIFICATIONSRESPONSIBILITIES:- 5-7 years of experience in a similar field- Help to develop new solar panel products for the construction industry- Development of the glass component of our solar panel prototypes for testing, and production.- Work with our R&D team and senior management for product development, planning and production. SUMMARYIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.
      • Vancouver, British Columbia
      • Permanent
      We are seeking an experienced Project Manager with extensive concrete residential construction experience for a leading Developer client of ours in the Vancouver area. Responsibilities:-Having overall responsibility for projects until turnover to homeowners and tenants-Providing input on consultant selections and procurement of soils testing/reports and any necessary environmental testing/reports as required-Being involved and representing construction at the inception of a project-Providing value engineering and construction assistance up to the issuance of DP-Facilitating and directing material issues to resolution in a timely manner with input from the development team-Ensuring and enforcing quality control of the finished product-Delivering projects on schedule, on budget and updating monthly cash flow projections-Assisting in updating site safety practices and enforcing it on site-Providing estimates/budgets during the various stages of the development process as required-Mentoring and developing Jr. Project Managers and Project Coordinators Qualifications:-Minimum of 8+ years’ experience managing all phases of designing and construction of concrete residential projects-A thorough understanding of the specific needs, codes and regulations pertaining to building within B.C., specifically Vancouver-Competent computer skills to review and produce project documents and communicate effectively in an online real time environment-Knowledge of AutoCAD is desirableIf you would like to be considered for this opportunity please forward your resume via email to Nick Paraskeva | nick.paraskeva@randstad.ca-- Nick Paraskeva Principal Recruitment Advisor Randstad Engineering Elite, 2018 nick.paraskeva@randstad.carandstad.caRESPONSIBILITIESQUALIFICATIONS
      We are seeking an experienced Project Manager with extensive concrete residential construction experience for a leading Developer client of ours in the Vancouver area. Responsibilities:-Having overall responsibility for projects until turnover to homeowners and tenants-Providing input on consultant selections and procurement of soils testing/reports and any necessary environmental testing/reports as required-Being involved and representing construction at the inception of a project-Providing value engineering and construction assistance up to the issuance of DP-Facilitating and directing material issues to resolution in a timely manner with input from the development team-Ensuring and enforcing quality control of the finished product-Delivering projects on schedule, on budget and updating monthly cash flow projections-Assisting in updating site safety practices and enforcing it on site-Providing estimates/budgets during the various stages of the development process as required-Mentoring and developing Jr. Project Managers and Project Coordinators Qualifications:-Minimum of 8+ years’ experience managing all phases of designing and construction of concrete residential projects-A thorough understanding of the specific needs, codes and regulations pertaining to building within B.C., specifically Vancouver-Competent computer skills to review and produce project documents and communicate effectively in an online real time environment-Knowledge of AutoCAD is desirableIf you would like to be considered for this opportunity please forward your resume via email to Nick Paraskeva | nick.paraskeva@randstad.ca-- Nick Paraskeva Principal Recruitment Advisor Randstad Engineering Elite, 2018 nick.paraskeva@randstad.carandstad.caRESPONSIBILITIESQUALIFICATIONS
      • Vancouver, British Columbia
      • Permanent
      We are seeking Superintendents with wood frame or concrete residential experience for a well established Developer client of ours in the Vancouver area. Responsibilities:-Assuming overall responsibility for all on-site construction activities-Leading and directing all field personnel on the project-Maintaining constant communications with Senior Management, Consultants, Inspectors and all applicable officials related to the ongoing construction of the project-Ensuring all work is performed by contractors and suppliers to contract documents (including drawings, specifications and contract scopes of work)-Reviewing all project plans, specifications, applicable documentation and report any omissions or discrepancies directly to the Construction Manager-Reviewing and maintaining the construction schedule and ensure that all contractors and suppliers comply with the critical dates they are required to meet-Taking full responsibility to ensure that all Municipal Inspections, Professional Inspections, Occupancy Permits and possession dates have been achieved to the satisfaction of the Construction Manager-Assuming direct responsibility to ensure the quality of construction, products and finishing are of superior quality.-Enforcing and monitoring the Occupational Health & Safety Act and Work Safe BC regulations to ensure a safe job site.-Understanding thoroughly our clients Construction Health and Safety Plan and execute its requirements-Responding to emergencies on the site in the off hours Qualifications:-Minimum of 10+ years’ experience in Wood Frame or Concrete residential construction required-Minimum of 5+ years construction experience in a supervisory or management capacityIf you would like to be considered for this opportunity please forward your resume via email to Nick Paraskeva | nick.paraskeva@randstad.caNick Paraskeva Principal Recruitment Advisor nick.paraskeva@randstad.carandstad.caRESPONSIBILITIESQUALIFICATIONS
      We are seeking Superintendents with wood frame or concrete residential experience for a well established Developer client of ours in the Vancouver area. Responsibilities:-Assuming overall responsibility for all on-site construction activities-Leading and directing all field personnel on the project-Maintaining constant communications with Senior Management, Consultants, Inspectors and all applicable officials related to the ongoing construction of the project-Ensuring all work is performed by contractors and suppliers to contract documents (including drawings, specifications and contract scopes of work)-Reviewing all project plans, specifications, applicable documentation and report any omissions or discrepancies directly to the Construction Manager-Reviewing and maintaining the construction schedule and ensure that all contractors and suppliers comply with the critical dates they are required to meet-Taking full responsibility to ensure that all Municipal Inspections, Professional Inspections, Occupancy Permits and possession dates have been achieved to the satisfaction of the Construction Manager-Assuming direct responsibility to ensure the quality of construction, products and finishing are of superior quality.-Enforcing and monitoring the Occupational Health & Safety Act and Work Safe BC regulations to ensure a safe job site.-Understanding thoroughly our clients Construction Health and Safety Plan and execute its requirements-Responding to emergencies on the site in the off hours Qualifications:-Minimum of 10+ years’ experience in Wood Frame or Concrete residential construction required-Minimum of 5+ years construction experience in a supervisory or management capacityIf you would like to be considered for this opportunity please forward your resume via email to Nick Paraskeva | nick.paraskeva@randstad.caNick Paraskeva Principal Recruitment Advisor nick.paraskeva@randstad.carandstad.caRESPONSIBILITIESQUALIFICATIONS
      • Scarborough, Ontario
      • Contract
      Responsible to Supervise the safety, integrity & cost effectiveness of plant installation, & the completion & accuracy of records.Ensure plant installations are in compliance with all applicable codes & standards (internal & external).Accountable for the overall daily Operational performance of a JUT and or EA Field - Coordination of day to day activities related to Construction Projects including records, status reporting, and financial processes.Recommend changes to Construction drawings/details to improve costs and installation efficiencies.Monitoring and awareness of potential financial impacts due to on site scope of Construction Project changes or field related issues.Ensure safety and pipeline integrity standards are complied with on Construction Projects and related activities.Specific Accountabilities:Effectively manage the overall efficiency of the daily Operation within area of responsibility.Responsible for day to day management of JUT and EA Contractors to ensure adherence to contract specifications and ensure stakeholder requirements are met.Provide field assistance completing pick lines pre-inspections, inspection and environmental surveys and other technical support for/with Distribution Planning, Construction, O&M & Customer Connection and review all Construction drawings to ensure proper fittings/tie-ins are utilized, purge procedures and appropriate, line locations are workable, etc.Review, assess and process associated invoicing for all Project and Service related work.Oversight of projects to ensure safety, quality and conformance standards are present and maintained.Complete QC reports on all inspected work and record results in EQMT.Where shortfalls have been identified ( via QA/QC ) follow up with coaching and mentoring of Contractors.Oversee the Construction of Major Projects.Maintain good working relationship with all municipalities, internal & external customers and EA Contractors.Resolve Customer/Municipalities/Utilities complaints and concerns and resolve in an appropriate & timely manner.Coordinate work and or inspection of all Joint Trench work including day to day work assignments with the Joint Trench Contractors to meet builder and developer scheduling.Review and Approve paperwork submitted by Company & Contractor Construction crews for payment, accuracy and timeliness of records submission (e.g. as-laid drawings, field notes, appurtenances, DPR¡¦s, cost plus extras).Supervise Company Construction Crews as required.Utilize effective communication skills and relationship building to promote positive relationships with internal/external key stakeholders.Please send your resume in confidence to paul.dusome@randstad.caRESPONSIBILITIESQUALIFICATIONS
      Responsible to Supervise the safety, integrity & cost effectiveness of plant installation, & the completion & accuracy of records.Ensure plant installations are in compliance with all applicable codes & standards (internal & external).Accountable for the overall daily Operational performance of a JUT and or EA Field - Coordination of day to day activities related to Construction Projects including records, status reporting, and financial processes.Recommend changes to Construction drawings/details to improve costs and installation efficiencies.Monitoring and awareness of potential financial impacts due to on site scope of Construction Project changes or field related issues.Ensure safety and pipeline integrity standards are complied with on Construction Projects and related activities.Specific Accountabilities:Effectively manage the overall efficiency of the daily Operation within area of responsibility.Responsible for day to day management of JUT and EA Contractors to ensure adherence to contract specifications and ensure stakeholder requirements are met.Provide field assistance completing pick lines pre-inspections, inspection and environmental surveys and other technical support for/with Distribution Planning, Construction, O&M & Customer Connection and review all Construction drawings to ensure proper fittings/tie-ins are utilized, purge procedures and appropriate, line locations are workable, etc.Review, assess and process associated invoicing for all Project and Service related work.Oversight of projects to ensure safety, quality and conformance standards are present and maintained.Complete QC reports on all inspected work and record results in EQMT.Where shortfalls have been identified ( via QA/QC ) follow up with coaching and mentoring of Contractors.Oversee the Construction of Major Projects.Maintain good working relationship with all municipalities, internal & external customers and EA Contractors.Resolve Customer/Municipalities/Utilities complaints and concerns and resolve in an appropriate & timely manner.Coordinate work and or inspection of all Joint Trench work including day to day work assignments with the Joint Trench Contractors to meet builder and developer scheduling.Review and Approve paperwork submitted by Company & Contractor Construction crews for payment, accuracy and timeliness of records submission (e.g. as-laid drawings, field notes, appurtenances, DPR¡¦s, cost plus extras).Supervise Company Construction Crews as required.Utilize effective communication skills and relationship building to promote positive relationships with internal/external key stakeholders.Please send your resume in confidence to paul.dusome@randstad.caRESPONSIBILITIESQUALIFICATIONS

    thank you for subscribing to your personalised job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.