Thank you for subscribing to your personalised job alerts.

    37 jobs found in Oldcastle, Ontario

    filter2
    clear all
      • Concord, Ontario
      • Contract
      We are looking to hire an Electronics test Professional for one of our global clients in the Concord area.The incumbent will be working in a dynamic team focusing n the electronics field and debugging digital & analog circuitries with excellent networking equipment hardware and software knowledge in a market-leading organization.AdvantagesThis is a 6-month long contract with a strong possibility of extension or being hired perm.Responsibilities• Hardware troubleshooting and failure analysisProvide technical training and support to production, repair service team and NPI qualification team• First line of contact for any difficult, unusual or critical failures• Provide DFS (Design for serviceability), DFM (Design for Manufacturing) & DFT (Design for Testing) feedback• Maintains professional skills and knowledge of emerging technologies necessary to execute the functions of a senior technician and training other team members• Work closely with Hardware & Software design teams to gain required knowledge on new products to train the repair service teamQualifications• Electronic diploma or equivalent• Engineering degree is considered an asset• Minimum 10 years of experience working as a technician in the electronics field and debugging digital & analog circuitries• Hands-on and fluent with lab equipment including spectrum analyzer, signal generator, oscilloscope, data logger, etc.• Excellent networking equipment hardware and software knowledge• Hands-on experience in prototype work and functional verification• Self-starter and Team Player• Excellent communication skills both verbal & written• Computer skills and good mechanical aptitude• Strong electronic knowledge• Work well under pressure with attention to detail• Experience in through-hole and SMT component solderingSummaryIf this sounds like a challenging next role for you then apply online today or send in your resume directly to swapna.nair@randstad.ca**ONLY QUALIFIED CANDIDATES WOULD BE CONTACTED.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      We are looking to hire an Electronics test Professional for one of our global clients in the Concord area.The incumbent will be working in a dynamic team focusing n the electronics field and debugging digital & analog circuitries with excellent networking equipment hardware and software knowledge in a market-leading organization.AdvantagesThis is a 6-month long contract with a strong possibility of extension or being hired perm.Responsibilities• Hardware troubleshooting and failure analysisProvide technical training and support to production, repair service team and NPI qualification team• First line of contact for any difficult, unusual or critical failures• Provide DFS (Design for serviceability), DFM (Design for Manufacturing) & DFT (Design for Testing) feedback• Maintains professional skills and knowledge of emerging technologies necessary to execute the functions of a senior technician and training other team members• Work closely with Hardware & Software design teams to gain required knowledge on new products to train the repair service teamQualifications• Electronic diploma or equivalent• Engineering degree is considered an asset• Minimum 10 years of experience working as a technician in the electronics field and debugging digital & analog circuitries• Hands-on and fluent with lab equipment including spectrum analyzer, signal generator, oscilloscope, data logger, etc.• Excellent networking equipment hardware and software knowledge• Hands-on experience in prototype work and functional verification• Self-starter and Team Player• Excellent communication skills both verbal & written• Computer skills and good mechanical aptitude• Strong electronic knowledge• Work well under pressure with attention to detail• Experience in through-hole and SMT component solderingSummaryIf this sounds like a challenging next role for you then apply online today or send in your resume directly to swapna.nair@randstad.ca**ONLY QUALIFIED CANDIDATES WOULD BE CONTACTED.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Concord, Ontario
      • Permanent
      Are you an Engineer that has been Supervising Production in an Automotive or related operation?Are you looking for an excellent company to make the next step in your career?If so, this could be the opportunity for you. We are looking for a Degreed Engineer to Supervise an advanced manufacturing operation.The position is for Afternoon shift : 3.30pm to 12 amOne position is for the Assembly department, one is for the Metal Plant Proven experience as Production Supervisor in a manufacturing company.Experience in Radiator manufacturing/ Automotive / equipment / sheet metal manufacturingExperience in using various types of manufacturing machinery and toolsKnowledge of machine repairs / Die changing / Tooling change AdvantagesPaid overtime after 40 hoursGroup benefits 100% company paidRRSP DPSP MatchingResponsibilitiesAbility to prioritize, plan and schedule work effectively with a production team in a fast paced environment Organize workflow by assigning responsibilities and preparing schedulesSet daily/weekly/monthly objectives and communicate them to employeesAble to meet Production targets in an efficient mannerKnowledge of Time and Method study.Able to set Production standards for various process.Identify issues in efficiency and suggest improvementsEnsure the safe use of equipment and schedule regular maintenanceEvaluate performance and progress of employeesMotivate and coach employeesTrain new employees on how to safely use machinery and follow proceduresEnforce strict safety guidelines and company standardsQualificationsAdvanced skills in MS OfficeGood Communication and interpersonal skillsSelf-motivated with a results-driven approachProblem-solving skillsStrong ethical skills to ensure confidentiality of sensitive information.Must have driving license with own vehicle.Degree in EngineeringSummaryTo apply, email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you an Engineer that has been Supervising Production in an Automotive or related operation?Are you looking for an excellent company to make the next step in your career?If so, this could be the opportunity for you. We are looking for a Degreed Engineer to Supervise an advanced manufacturing operation.The position is for Afternoon shift : 3.30pm to 12 amOne position is for the Assembly department, one is for the Metal Plant Proven experience as Production Supervisor in a manufacturing company.Experience in Radiator manufacturing/ Automotive / equipment / sheet metal manufacturingExperience in using various types of manufacturing machinery and toolsKnowledge of machine repairs / Die changing / Tooling change AdvantagesPaid overtime after 40 hoursGroup benefits 100% company paidRRSP DPSP MatchingResponsibilitiesAbility to prioritize, plan and schedule work effectively with a production team in a fast paced environment Organize workflow by assigning responsibilities and preparing schedulesSet daily/weekly/monthly objectives and communicate them to employeesAble to meet Production targets in an efficient mannerKnowledge of Time and Method study.Able to set Production standards for various process.Identify issues in efficiency and suggest improvementsEnsure the safe use of equipment and schedule regular maintenanceEvaluate performance and progress of employeesMotivate and coach employeesTrain new employees on how to safely use machinery and follow proceduresEnforce strict safety guidelines and company standardsQualificationsAdvanced skills in MS OfficeGood Communication and interpersonal skillsSelf-motivated with a results-driven approachProblem-solving skillsStrong ethical skills to ensure confidentiality of sensitive information.Must have driving license with own vehicle.Degree in EngineeringSummaryTo apply, email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Ottawa, Ontario
      • Contract
      Primary Responsibilities • Purchase the highest quality materials at the lowest possible cost in correct amounts per specifications and drawings with buyouts. • Interface with various other departments and disciplines to evaluate and monitor contract performance, ensuring compliance with contractual obligations.• Confer with staff, users and vendors to discuss defective or unacceptable goods or service and determine corrective action. • Leverage vendors/subcontractors across multiple procurements to create cost savings to project(s).• Research and evaluate suppliers based on price, quality, selection, service, support, availability, reliability, production and distribution capabilities and the supplier’s reputation and history. • Participate in the supplier bid evaluation, bid analyst, development of terms and conditions and recommendations for commercial contracts. • Monitor shipments to ensure goods come in on time and resolve problems related to undelivered goods. • Prepare/issue Request for Proposals (RFP’s) and evaluate vendor/subcontractor proposals to identify vendors/subcontractors who meet project constraints of budget and schedule at the estimating, execution and site purchasing levels.Qualifications• Proficient in Microsoft Office (Power Point, Word, Excel) and have a general knowledge of database utilization; SAP Experience a plus • Bachelor’s degree in construction management, business, engineering, supply chain management, or equivalent degree or military experience• At least five years’ experience in an engineering and/or construction related role• Thorough understanding and at least five years’ experience in contract administration and RFP’s • Detail-oriented, highly motivated with ability to effectively manage time • Excellent interpersonal, written and verbal communication skills• Team player with the ability to work independently to meet deadlines, goals and objectives• Must be bilingual in French and EnglishPlease send your resume in confidence to paul.dusome@randstad.caAdvantagesCandidate must be bilingual (English & French) • Purchase the highest quality materials at the lowest possible cost in correct amounts per specifications and drawings with buyouts. • Interface with various other departments and disciplines to evaluate and monitor contract performance, ensuring compliance with contractual obligations.ResponsibilitiesPrimary Responsibilities • Purchase the highest quality materials at the lowest possible cost in correct amounts per specifications and drawings with buyouts. • Interface with various other departments and disciplines to evaluate and monitor contract performance, ensuring compliance with contractual obligations.• Confer with staff, users and vendors to discuss defective or unacceptable goods or service and determine corrective action. • Leverage vendors/subcontractors across multiple procurements to create cost savings to project(s).• Research and evaluate suppliers based on price, quality, selection, service, support, availability, reliability, production and distribution capabilities and the supplier’s reputation and history. • Participate in the supplier bid evaluation, bid analyst, development of terms and conditions and recommendations for commercial contracts. • Monitor shipments to ensure goods come in on time and resolve problems related to undelivered goods. • Prepare/issue Request for Proposals (RFP’s) and evaluate vendor/subcontractor proposals to identify vendors/subcontractors who meet project constraints of budget and schedule at the estimating, execution and site purchasing levels.Qualifications• Proficient in Microsoft Office (Power Point, Word, Excel) and have a general knowledge of database utilization; SAP Experience a plus • Bachelor’s degree in construction management, business, engineering, supply chain management, or equivalent degree or military experience• At least five years’ experience in an engineering and/or construction related role• Thorough understanding and at least five years’ experience in contract administration and RFP’s • Detail-oriented, highly motivated with ability to effectively manage time • Excellent interpersonal, written and verbal communication skills• Team player with the ability to work independently to meet deadlines, goals and objectives• Must be bilingual in French and EnglishPlease send your resume in confidence to paul.dusome@randstad.caQualificationsQualifications• Proficient in Microsoft Office (Power Point, Word, Excel) and have a general knowledge of database utilization; SAP Experience a plus • Bachelor’s degree in construction management, business, engineering, supply chain management, or equivalent degree or military experience• At least five years’ experience in an engineering and/or construction related role• Thorough understanding and at least five years’ experience in contract administration and RFP’s • Detail-oriented, highly motivated with ability to effectively manage time • Excellent interpersonal, written and verbal communication skills• Team player with the ability to work independently to meet deadlines, goals and objectives• Must be bilingual in French and EnglishSummaryPrimary Responsibilities • Purchase the highest quality materials at the lowest possible cost in correct amounts per specifications and drawings with buyouts. • Interface with various other departments and disciplines to evaluate and monitor contract performance, ensuring compliance with contractual obligations.• Confer with staff, users and vendors to discuss defective or unacceptable goods or service and determine corrective action. • Leverage vendors/subcontractors across multiple procurements to create cost savings to project(s).• Research and evaluate suppliers based on price, quality, selection, service, support, availability, reliability, production and distribution capabilities and the supplier’s reputation and history. • Participate in the supplier bid evaluation, bid analyst, development of terms and conditions and recommendations for commercial contracts. • Monitor shipments to ensure goods come in on time and resolve problems related to undelivered goods. • Prepare/issue Request for Proposals (RFP’s) and evaluate vendor/subcontractor proposals to identify vendors/subcontractors who meet project constraints of budget and schedule at the estimating, execution and site purchasing levels.Qualifications• Proficient in Microsoft Office (Power Point, Word, Excel) and have a general knowledge of database utilization; SAP Experience a plus • Bachelor’s degree in construction management, business, engineering, supply chain management, or equivalent degree or military experience• At least five years’ experience in an engineering and/or construction related role• Thorough understanding and at least five years’ experience in contract administration and RFP’s • Detail-oriented, highly motivated with ability to effectively manage time • Excellent interpersonal, written and verbal communication skills• Team player with the ability to work independently to meet deadlines, goals and objectives• Must be bilingual in French and EnglishPlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Primary Responsibilities • Purchase the highest quality materials at the lowest possible cost in correct amounts per specifications and drawings with buyouts. • Interface with various other departments and disciplines to evaluate and monitor contract performance, ensuring compliance with contractual obligations.• Confer with staff, users and vendors to discuss defective or unacceptable goods or service and determine corrective action. • Leverage vendors/subcontractors across multiple procurements to create cost savings to project(s).• Research and evaluate suppliers based on price, quality, selection, service, support, availability, reliability, production and distribution capabilities and the supplier’s reputation and history. • Participate in the supplier bid evaluation, bid analyst, development of terms and conditions and recommendations for commercial contracts. • Monitor shipments to ensure goods come in on time and resolve problems related to undelivered goods. • Prepare/issue Request for Proposals (RFP’s) and evaluate vendor/subcontractor proposals to identify vendors/subcontractors who meet project constraints of budget and schedule at the estimating, execution and site purchasing levels.Qualifications• Proficient in Microsoft Office (Power Point, Word, Excel) and have a general knowledge of database utilization; SAP Experience a plus • Bachelor’s degree in construction management, business, engineering, supply chain management, or equivalent degree or military experience• At least five years’ experience in an engineering and/or construction related role• Thorough understanding and at least five years’ experience in contract administration and RFP’s • Detail-oriented, highly motivated with ability to effectively manage time • Excellent interpersonal, written and verbal communication skills• Team player with the ability to work independently to meet deadlines, goals and objectives• Must be bilingual in French and EnglishPlease send your resume in confidence to paul.dusome@randstad.caAdvantagesCandidate must be bilingual (English & French) • Purchase the highest quality materials at the lowest possible cost in correct amounts per specifications and drawings with buyouts. • Interface with various other departments and disciplines to evaluate and monitor contract performance, ensuring compliance with contractual obligations.ResponsibilitiesPrimary Responsibilities • Purchase the highest quality materials at the lowest possible cost in correct amounts per specifications and drawings with buyouts. • Interface with various other departments and disciplines to evaluate and monitor contract performance, ensuring compliance with contractual obligations.• Confer with staff, users and vendors to discuss defective or unacceptable goods or service and determine corrective action. • Leverage vendors/subcontractors across multiple procurements to create cost savings to project(s).• Research and evaluate suppliers based on price, quality, selection, service, support, availability, reliability, production and distribution capabilities and the supplier’s reputation and history. • Participate in the supplier bid evaluation, bid analyst, development of terms and conditions and recommendations for commercial contracts. • Monitor shipments to ensure goods come in on time and resolve problems related to undelivered goods. • Prepare/issue Request for Proposals (RFP’s) and evaluate vendor/subcontractor proposals to identify vendors/subcontractors who meet project constraints of budget and schedule at the estimating, execution and site purchasing levels.Qualifications• Proficient in Microsoft Office (Power Point, Word, Excel) and have a general knowledge of database utilization; SAP Experience a plus • Bachelor’s degree in construction management, business, engineering, supply chain management, or equivalent degree or military experience• At least five years’ experience in an engineering and/or construction related role• Thorough understanding and at least five years’ experience in contract administration and RFP’s • Detail-oriented, highly motivated with ability to effectively manage time • Excellent interpersonal, written and verbal communication skills• Team player with the ability to work independently to meet deadlines, goals and objectives• Must be bilingual in French and EnglishPlease send your resume in confidence to paul.dusome@randstad.caQualificationsQualifications• Proficient in Microsoft Office (Power Point, Word, Excel) and have a general knowledge of database utilization; SAP Experience a plus • Bachelor’s degree in construction management, business, engineering, supply chain management, or equivalent degree or military experience• At least five years’ experience in an engineering and/or construction related role• Thorough understanding and at least five years’ experience in contract administration and RFP’s • Detail-oriented, highly motivated with ability to effectively manage time • Excellent interpersonal, written and verbal communication skills• Team player with the ability to work independently to meet deadlines, goals and objectives• Must be bilingual in French and EnglishSummaryPrimary Responsibilities • Purchase the highest quality materials at the lowest possible cost in correct amounts per specifications and drawings with buyouts. • Interface with various other departments and disciplines to evaluate and monitor contract performance, ensuring compliance with contractual obligations.• Confer with staff, users and vendors to discuss defective or unacceptable goods or service and determine corrective action. • Leverage vendors/subcontractors across multiple procurements to create cost savings to project(s).• Research and evaluate suppliers based on price, quality, selection, service, support, availability, reliability, production and distribution capabilities and the supplier’s reputation and history. • Participate in the supplier bid evaluation, bid analyst, development of terms and conditions and recommendations for commercial contracts. • Monitor shipments to ensure goods come in on time and resolve problems related to undelivered goods. • Prepare/issue Request for Proposals (RFP’s) and evaluate vendor/subcontractor proposals to identify vendors/subcontractors who meet project constraints of budget and schedule at the estimating, execution and site purchasing levels.Qualifications• Proficient in Microsoft Office (Power Point, Word, Excel) and have a general knowledge of database utilization; SAP Experience a plus • Bachelor’s degree in construction management, business, engineering, supply chain management, or equivalent degree or military experience• At least five years’ experience in an engineering and/or construction related role• Thorough understanding and at least five years’ experience in contract administration and RFP’s • Detail-oriented, highly motivated with ability to effectively manage time • Excellent interpersonal, written and verbal communication skills• Team player with the ability to work independently to meet deadlines, goals and objectives• Must be bilingual in French and EnglishPlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Ottawa, Ontario
      • Contract
      Under the supervision of the Manager, Maintenance/ Lead Technicians; the Equipment Technician’s primary responsibility is to support and perform maintenance of all Manufacturing equipment and related equipment issues. Duties and Responsibilities•Provides support and performs maintenance for all card Manufacturing equipment & related issues. Monitor, maintain and calibrate equipment in areas such as the card assembly line, HVAC units for card line enclosure, building air compressor, in according with approved procedures•Provides support to daily card production, R&D experiments and potential future projects•Assists in the determination of root cause of failures and problems with automation equipment. Communicates effectively, verbally and in writing, to various groups affiliated with card manufacturing•Assesses multiple process variables and their interactions and then provides a reasoned, rapid response to issues revealed by test results•Troubleshooting and repair of equipment failures and operational problems•Documentation of equipment maintenance activities in maintenance logs •Performs calibration procedures•Provides support as required for equipment mechanical and control system issues•Communicates equipment-related issues with Manufacturing and Mechanical Engineering•Creates consumables used in certain automated operations•Complies with documentation requirements to ensure equipment and production records are completed accuratelyAdvantagesKey Contacts•Reports directly to Manager, Maintenance.•Perform shift duties assigned by Lead technician.•Frequent interaction with engineers, Lead technicians, and card production operatorsResponsibilities•Flexibility to work overtime and on different shifts as required•Noisy and fast-paced manufacturing environment•Ability to work independently and take appropriate action as required•Flexibility to respond to a changing and evolving environment including the ability to interact effectively with all levels of the organization •Ability to participate in process, product, equipment, and component validations and verifications (e.g. new product introductions)•Adheres to change control protocols and maintenance procedures typical of medical device manufacturing settings•Excellent oral and written communication skills •Ability to work effectively in a team environment while satisfying personal responsibilities•Ready to speak up about concerns•PhysicaloManual dexterity oAbility to distinguish between coloursoExtended periods of standing and walkingoOccasional kneeling and crouchingQualifications•[Mechanical or Electrical Technician Diploma and/or an acceptable combination of education and experience •Mechanical and/or automation aptitude toward equipment troubleshooting and root cause analysis is considered as key asset•Familiarity with operation, assembly, and maintenance of electro-mechanical equipment•Experience working in a medical device manufacturing or electronic manufacturing setting is considered an asset•Proficient knowledge of MS Office (Word, Excel, Outlook, etc.)SummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.ca Thank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Under the supervision of the Manager, Maintenance/ Lead Technicians; the Equipment Technician’s primary responsibility is to support and perform maintenance of all Manufacturing equipment and related equipment issues. Duties and Responsibilities•Provides support and performs maintenance for all card Manufacturing equipment & related issues. Monitor, maintain and calibrate equipment in areas such as the card assembly line, HVAC units for card line enclosure, building air compressor, in according with approved procedures•Provides support to daily card production, R&D experiments and potential future projects•Assists in the determination of root cause of failures and problems with automation equipment. Communicates effectively, verbally and in writing, to various groups affiliated with card manufacturing•Assesses multiple process variables and their interactions and then provides a reasoned, rapid response to issues revealed by test results•Troubleshooting and repair of equipment failures and operational problems•Documentation of equipment maintenance activities in maintenance logs •Performs calibration procedures•Provides support as required for equipment mechanical and control system issues•Communicates equipment-related issues with Manufacturing and Mechanical Engineering•Creates consumables used in certain automated operations•Complies with documentation requirements to ensure equipment and production records are completed accuratelyAdvantagesKey Contacts•Reports directly to Manager, Maintenance.•Perform shift duties assigned by Lead technician.•Frequent interaction with engineers, Lead technicians, and card production operatorsResponsibilities•Flexibility to work overtime and on different shifts as required•Noisy and fast-paced manufacturing environment•Ability to work independently and take appropriate action as required•Flexibility to respond to a changing and evolving environment including the ability to interact effectively with all levels of the organization •Ability to participate in process, product, equipment, and component validations and verifications (e.g. new product introductions)•Adheres to change control protocols and maintenance procedures typical of medical device manufacturing settings•Excellent oral and written communication skills •Ability to work effectively in a team environment while satisfying personal responsibilities•Ready to speak up about concerns•PhysicaloManual dexterity oAbility to distinguish between coloursoExtended periods of standing and walkingoOccasional kneeling and crouchingQualifications•[Mechanical or Electrical Technician Diploma and/or an acceptable combination of education and experience •Mechanical and/or automation aptitude toward equipment troubleshooting and root cause analysis is considered as key asset•Familiarity with operation, assembly, and maintenance of electro-mechanical equipment•Experience working in a medical device manufacturing or electronic manufacturing setting is considered an asset•Proficient knowledge of MS Office (Word, Excel, Outlook, etc.)SummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.ca Thank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Concord, Ontario
      • Permanent
      Our Automotive client in the GTA area has partnered with Randstad Engineering in their search for a Project/Program Engineer to join the tooling department.Title - Project Engineer- Ford SupplierLocation - Vaughan, ONShift - Straight DaysSalary - Flexible as per experience and qualification.Industry - Automotive Tier 1Direct Ford or Ford supplier experience is a Must for this position. If you are interested in this opportunity, apply today online or send your resume directly to Ankur Vaid at ankur.vaid@randstad.caAdvantagesThis is a permanent opportunity, with a competitive compensation package in a thriving environment.ResponsibilitiesIdeal candidates will:Program Engineer or Manager with Ford experience ( from ford direct or supplier of ford)Or Project Engineering experience that works with Ford Or Engineering experience that deals with Ford as a SupplierSummary of the position:Builds and maintains relationships with an assigned group of customer accounts that typically includes a limited number of major customers within a geographical area or industry focus. Attains revenue targets by increasing revenue spend per account. Generates demand for the company’s products and services by raising their profile with customers. Conducts frequent meetings with the customer’s senior management to understand their needs and connect them to the company’s products/services.Qualifications Experience working with Ford would be an asset· APQP· Budgeting and forecasting tooling cash collection, and tracking associated forecasts to confirm performance against plan· Build Plan· Business Case Review· Customer Support- Meetings/Interface (cost/price reviews, open issues, timing, AAR, launch readiness, etc.…)· Customer Systems- Manage inputs in all applicable customer systems related to timing· Drive team to achieve budgeted/forecasted operating income improvement targets for each OEM customer· Engineering Changes- Manage timing with customer· Works with and assists Quality, and Process engineering as needed· Participates with Continuous Improvements· Ensure that team quote turnaround time meets customer expectations with accurate data that will enhance EBITDA· Ensures programs are completed on time and within budget· Equipment Plan· Facility Plan· Launch support, including onsite and customer manufacturing locations· Logistics Requirements/Freight Study· Maintain Overall program Timing (tooling, gages, build dates, testing, etc.…)- Both internal and customer timeline· Manage GDLS and Pro-Link Lead monthly BU reviews coordinate with other functional leaders to ensure effectiveness.· Manage program financial performance· Management Gateway Reviews (MGR's)· PAR· Plant Reviews· Post Launch Business Case Review· Production Part Approval Process (PPAP), internal and supplier· Prototype Build plan, parts ordering (B-req's), execution, and support· Quote Risk Assessment· Tooling Financial Tracking· Tooling- Follow and manage all tool timing with tool shops and report out to customer· Work Order Process- Create, obtain approvals, and manageSummaryf you are interested in this opportunity, apply today online or send your resume directly to Ankur Vaid at ankur.vaid@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our Automotive client in the GTA area has partnered with Randstad Engineering in their search for a Project/Program Engineer to join the tooling department.Title - Project Engineer- Ford SupplierLocation - Vaughan, ONShift - Straight DaysSalary - Flexible as per experience and qualification.Industry - Automotive Tier 1Direct Ford or Ford supplier experience is a Must for this position. If you are interested in this opportunity, apply today online or send your resume directly to Ankur Vaid at ankur.vaid@randstad.caAdvantagesThis is a permanent opportunity, with a competitive compensation package in a thriving environment.ResponsibilitiesIdeal candidates will:Program Engineer or Manager with Ford experience ( from ford direct or supplier of ford)Or Project Engineering experience that works with Ford Or Engineering experience that deals with Ford as a SupplierSummary of the position:Builds and maintains relationships with an assigned group of customer accounts that typically includes a limited number of major customers within a geographical area or industry focus. Attains revenue targets by increasing revenue spend per account. Generates demand for the company’s products and services by raising their profile with customers. Conducts frequent meetings with the customer’s senior management to understand their needs and connect them to the company’s products/services.Qualifications Experience working with Ford would be an asset· APQP· Budgeting and forecasting tooling cash collection, and tracking associated forecasts to confirm performance against plan· Build Plan· Business Case Review· Customer Support- Meetings/Interface (cost/price reviews, open issues, timing, AAR, launch readiness, etc.…)· Customer Systems- Manage inputs in all applicable customer systems related to timing· Drive team to achieve budgeted/forecasted operating income improvement targets for each OEM customer· Engineering Changes- Manage timing with customer· Works with and assists Quality, and Process engineering as needed· Participates with Continuous Improvements· Ensure that team quote turnaround time meets customer expectations with accurate data that will enhance EBITDA· Ensures programs are completed on time and within budget· Equipment Plan· Facility Plan· Launch support, including onsite and customer manufacturing locations· Logistics Requirements/Freight Study· Maintain Overall program Timing (tooling, gages, build dates, testing, etc.…)- Both internal and customer timeline· Manage GDLS and Pro-Link Lead monthly BU reviews coordinate with other functional leaders to ensure effectiveness.· Manage program financial performance· Management Gateway Reviews (MGR's)· PAR· Plant Reviews· Post Launch Business Case Review· Production Part Approval Process (PPAP), internal and supplier· Prototype Build plan, parts ordering (B-req's), execution, and support· Quote Risk Assessment· Tooling Financial Tracking· Tooling- Follow and manage all tool timing with tool shops and report out to customer· Work Order Process- Create, obtain approvals, and manageSummaryf you are interested in this opportunity, apply today online or send your resume directly to Ankur Vaid at ankur.vaid@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Permanent
      Randstad Engineering is currently recruiting for a Senior Automation Engineer role with experience within the industrial automation field. Experience with AutoCAD & Solid Works is a MUST have for this role. This is for a Global and one of the largest Electronics manufacturing companies in Toronto.Do you have 7+ years of experience do you have with warehouse and material handling automation?Have you completed a warehouse automation project that you have concepted from start to finish worth $1M to $5M?Do you have knowledge of engineering principles and tolerances?Have you led projects from start to finish?If you have experience in all of the above, then this is the right opportunity for you in Toronto. Please send me your resume at rahul.dhawan@randstad.caAdvantagesThis is a Full-time permanent opportunity with our clients along with a complete Bonus, benefits and a competitive salary package.Responsibilities- Concept and architect automated warehouse systems and standards that support these systems  - Analysis of inputs and User Requirements in order to determine feasibility of systems that meet specifications  - Must be capable of designing systems from sketches or verbal concepts  - Perform engineering calculations with respect to cycle time, loads, standard packaging types  - Analyze engineering drawings and specifications to determine requirements in the development of equipment to meet specifications  - Produce working drawings, models and bills of materials for equipment, or sub-assemblies  - Work with large global logistics integrators to optimize systems from technical information and specifications  - Analyze designs and systems for compliance to applicable standards (i.e. CE or customer-specific)  - Make recommendations for warehouse systems based on available input and analysis - Review drawings for accuracy, material selection, proper machining techniques, finishes, hardness, etc.  - Communicate all requested design changes to various teams  - Responsible for communicating progress on tasksQualificationsEducation:  University Degree or College Diploma in Mechanical Engineering / Robotics Automation Technology Experience:  Minimum 10 years in automation design of logistics and warehouse automation systems concepting large [$1-5+M] projectsTravel Requirements:  Expectation of travel to vendor/supplier locations is less than 20% of time, however may be exceeded in exceptional circumstances to meet project needsSummaryIf you are interested in this opportunity, please send your resume directly to Rahul Dhawan at rahul.dhawan@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Randstad Engineering is currently recruiting for a Senior Automation Engineer role with experience within the industrial automation field. Experience with AutoCAD & Solid Works is a MUST have for this role. This is for a Global and one of the largest Electronics manufacturing companies in Toronto.Do you have 7+ years of experience do you have with warehouse and material handling automation?Have you completed a warehouse automation project that you have concepted from start to finish worth $1M to $5M?Do you have knowledge of engineering principles and tolerances?Have you led projects from start to finish?If you have experience in all of the above, then this is the right opportunity for you in Toronto. Please send me your resume at rahul.dhawan@randstad.caAdvantagesThis is a Full-time permanent opportunity with our clients along with a complete Bonus, benefits and a competitive salary package.Responsibilities- Concept and architect automated warehouse systems and standards that support these systems  - Analysis of inputs and User Requirements in order to determine feasibility of systems that meet specifications  - Must be capable of designing systems from sketches or verbal concepts  - Perform engineering calculations with respect to cycle time, loads, standard packaging types  - Analyze engineering drawings and specifications to determine requirements in the development of equipment to meet specifications  - Produce working drawings, models and bills of materials for equipment, or sub-assemblies  - Work with large global logistics integrators to optimize systems from technical information and specifications  - Analyze designs and systems for compliance to applicable standards (i.e. CE or customer-specific)  - Make recommendations for warehouse systems based on available input and analysis - Review drawings for accuracy, material selection, proper machining techniques, finishes, hardness, etc.  - Communicate all requested design changes to various teams  - Responsible for communicating progress on tasksQualificationsEducation:  University Degree or College Diploma in Mechanical Engineering / Robotics Automation Technology Experience:  Minimum 10 years in automation design of logistics and warehouse automation systems concepting large [$1-5+M] projectsTravel Requirements:  Expectation of travel to vendor/supplier locations is less than 20% of time, however may be exceeded in exceptional circumstances to meet project needsSummaryIf you are interested in this opportunity, please send your resume directly to Rahul Dhawan at rahul.dhawan@randstad.caOnly qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Concord, Ontario
      • Permanent
      Are you looking for a great opportunity to work in the supply chain for a large automotive company? Do you have experience with purchasing and inventory control in the automotive industry? If so, this may be a good opportunity for you. Job responsibilityMaintain an accurate and organized system pertaining to supplier releasing and expediting purchased parts, costeffective logistics, optimizing MRP parameters and developing supplier relationships and performance.AdvantagesBeing part of a large and innovative company with innovation as a core valueCompetitive salary and benefits package ResponsibilitiesKey duties and Authorities:a) Expediting Incoming Purchased parts.b) Coordinates Out-side Process parts to and from suppliers.c) Issues supplier trouble reports and follows up on supplier corrective actions.d) Issues new program Blanket PO’s.e) Organizes and Documents premium freight.f) Issues component releases to suppliers as required using MRP and EDI.g) Conducts periodical spot verification of inventory versus indicated quantities.h) Participates in New Product launch and Engineering Change activities to support Flawless Launch results.i) Purchase Order Amendment as changes become effective.j) Maintains effective supplier communications.k) Continuously works toward the part supply of 100% on time.l) Continuously works toward 0$ premium freight.m) Analyzes supply chain and recommends inventory optimization.n) Responsible for purchase part inventory value.o) Responsible for and works continuously toward 0$ obsolescence for purchase parts.p) Creates cost-effective trucking Schedules including “Milk Run” for U.S. component pick-ups.q) Work in a safe manner at all times.r) Adopt and practise Kaizen Principles and Concepts.s) Participate in Kaizen and GEAR activities.t) Follow all general procedures where applicable as indicated in the GENERAL PROCEDURES section of thelevel III Procedure manual.u) Follow all DEPARTMENTAL GENERAL PROCEDURES as well as procedures for this position as indicated inthe level III Procedure manual.v) Perform other duties as assigned.w) Work in compliance and conform to QS9000, TS16949 and ISO14001 standards.QualificationsPrevious experience in automotive materials department.b) Computer experience with MRP, EDI, Excel. SAP an asset.c) Good communication and organizational skillsd) Previous vendor releasing experience preferredRelated education preferred including CPIM, and Supply Chain Management,f) Be able to interact with all levels of employees in a multicultural environmentg) Ability to read, write and speak EnglishSummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Ankur at ankur.vaid@randstad.caThank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you looking for a great opportunity to work in the supply chain for a large automotive company? Do you have experience with purchasing and inventory control in the automotive industry? If so, this may be a good opportunity for you. Job responsibilityMaintain an accurate and organized system pertaining to supplier releasing and expediting purchased parts, costeffective logistics, optimizing MRP parameters and developing supplier relationships and performance.AdvantagesBeing part of a large and innovative company with innovation as a core valueCompetitive salary and benefits package ResponsibilitiesKey duties and Authorities:a) Expediting Incoming Purchased parts.b) Coordinates Out-side Process parts to and from suppliers.c) Issues supplier trouble reports and follows up on supplier corrective actions.d) Issues new program Blanket PO’s.e) Organizes and Documents premium freight.f) Issues component releases to suppliers as required using MRP and EDI.g) Conducts periodical spot verification of inventory versus indicated quantities.h) Participates in New Product launch and Engineering Change activities to support Flawless Launch results.i) Purchase Order Amendment as changes become effective.j) Maintains effective supplier communications.k) Continuously works toward the part supply of 100% on time.l) Continuously works toward 0$ premium freight.m) Analyzes supply chain and recommends inventory optimization.n) Responsible for purchase part inventory value.o) Responsible for and works continuously toward 0$ obsolescence for purchase parts.p) Creates cost-effective trucking Schedules including “Milk Run” for U.S. component pick-ups.q) Work in a safe manner at all times.r) Adopt and practise Kaizen Principles and Concepts.s) Participate in Kaizen and GEAR activities.t) Follow all general procedures where applicable as indicated in the GENERAL PROCEDURES section of thelevel III Procedure manual.u) Follow all DEPARTMENTAL GENERAL PROCEDURES as well as procedures for this position as indicated inthe level III Procedure manual.v) Perform other duties as assigned.w) Work in compliance and conform to QS9000, TS16949 and ISO14001 standards.QualificationsPrevious experience in automotive materials department.b) Computer experience with MRP, EDI, Excel. SAP an asset.c) Good communication and organizational skillsd) Previous vendor releasing experience preferredRelated education preferred including CPIM, and Supply Chain Management,f) Be able to interact with all levels of employees in a multicultural environmentg) Ability to read, write and speak EnglishSummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Ankur at ankur.vaid@randstad.caThank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      Responsibilities: The role resides in the Integrity Data Assessment team in Integrity which focuses on risk modelling and assessment, data governance, and software administration for all types of assets in Integrity.This contract position will be dedicated to a multi-year integration project to integrate Legacy Union TIMP pipelines into the Pipeline Risk and Integrity Management (PRIM) software; the team is looking for a highly motivated and technically sound Engineering Analyst to perform the following duties:• Conduct detailed checks of converted pipeline dataset to ensure they meet reporting standards and accurately reflect the pipeline specifications• Review Engineering drawings, bill of materials, other company records to validate pipeline specifications• Review and assess pipeline Non-Destructive Testing (NDT) records and digitize pertinent information using the PRIM software package.• Create and manipulate GIS dataset using satellite imagery and basic tools in ESRI ArcMap software package• Obtain a technical understanding of Integrity documents and processes to drive improvements to the data supporting Integrity and Risk assessments.MUST HAVE qualifications:• Technology diploma, Engineering degree, or experience with Enbridge records• Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsNICE TO HAVE qualifications:• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Knowledge of Enbridge Gas Inc. policy and procedures• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesPlease send your resume in confidence to paul.dusome@randstad.caAdvantages• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesResponsibilitiesResponsibilities:The role resides in the Integrity Data Assessment team in Integrity which focuses on risk modelling and assessment, data governance, and software administration for all types of assets in Integrity.This contract position will be dedicated to a multi-year integration project to integrate Legacy Union TIMP pipelines into the Pipeline Risk and Integrity Management (PRIM) software; the team is looking for a highly motivated and technically sound Engineering Analyst to perform the following duties:• Conduct detailed checks of converted pipeline dataset to ensure they meet reporting standards and accurately reflect the pipeline specifications• Review Engineering drawings, bill of materials, other company records to validate pipeline specifications• Review and assess pipeline Non-Destructive Testing (NDT) records and digitize pertinent information using the PRIM software package.• Create and manipulate GIS dataset using satellite imagery and basic tools in ESRI ArcMap software package• Obtain a technical understanding of Integrity documents and processes to drive improvements to the data supporting Integrity and Risk assessments.MUST HAVE qualifications:• Technology diploma, Engineering degree, or experience with Enbridge records• Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsNICE TO HAVE qualifications:• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Knowledge of Enbridge Gas Inc. policy and procedures• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesPlease send your resume in confidence to paul.dusome@randstad.caQualifications• Technology diploma, Engineering degree, • Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsSummaryResponsibilities:The role resides in the Integrity Data Assessment team in Integrity which focuses on risk modelling and assessment, data governance, and software administration for all types of assets in Integrity.This contract position will be dedicated to a multi-year integration project to integrate Legacy Union TIMP pipelines into the Pipeline Risk and Integrity Management (PRIM) software; the team is looking for a highly motivated and technically sound Engineering Analyst to perform the following duties:• Conduct detailed checks of converted pipeline dataset to ensure they meet reporting standards and accurately reflect the pipeline specifications• Review Engineering drawings, bill of materials, other company records to validate pipeline specifications• Review and assess pipeline Non-Destructive Testing (NDT) records and digitize pertinent information using the PRIM software package.• Create and manipulate GIS dataset using satellite imagery and basic tools in ESRI ArcMap software package• Obtain a technical understanding of Integrity documents and processes to drive improvements to the data supporting Integrity and Risk assessments.MUST HAVE qualifications:• Technology diploma, Engineering degree, or experience with Enbridge records• Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsNICE TO HAVE qualifications:• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Knowledge of Enbridge Gas Inc. policy and procedures• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesPlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Responsibilities: The role resides in the Integrity Data Assessment team in Integrity which focuses on risk modelling and assessment, data governance, and software administration for all types of assets in Integrity.This contract position will be dedicated to a multi-year integration project to integrate Legacy Union TIMP pipelines into the Pipeline Risk and Integrity Management (PRIM) software; the team is looking for a highly motivated and technically sound Engineering Analyst to perform the following duties:• Conduct detailed checks of converted pipeline dataset to ensure they meet reporting standards and accurately reflect the pipeline specifications• Review Engineering drawings, bill of materials, other company records to validate pipeline specifications• Review and assess pipeline Non-Destructive Testing (NDT) records and digitize pertinent information using the PRIM software package.• Create and manipulate GIS dataset using satellite imagery and basic tools in ESRI ArcMap software package• Obtain a technical understanding of Integrity documents and processes to drive improvements to the data supporting Integrity and Risk assessments.MUST HAVE qualifications:• Technology diploma, Engineering degree, or experience with Enbridge records• Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsNICE TO HAVE qualifications:• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Knowledge of Enbridge Gas Inc. policy and procedures• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesPlease send your resume in confidence to paul.dusome@randstad.caAdvantages• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesResponsibilitiesResponsibilities:The role resides in the Integrity Data Assessment team in Integrity which focuses on risk modelling and assessment, data governance, and software administration for all types of assets in Integrity.This contract position will be dedicated to a multi-year integration project to integrate Legacy Union TIMP pipelines into the Pipeline Risk and Integrity Management (PRIM) software; the team is looking for a highly motivated and technically sound Engineering Analyst to perform the following duties:• Conduct detailed checks of converted pipeline dataset to ensure they meet reporting standards and accurately reflect the pipeline specifications• Review Engineering drawings, bill of materials, other company records to validate pipeline specifications• Review and assess pipeline Non-Destructive Testing (NDT) records and digitize pertinent information using the PRIM software package.• Create and manipulate GIS dataset using satellite imagery and basic tools in ESRI ArcMap software package• Obtain a technical understanding of Integrity documents and processes to drive improvements to the data supporting Integrity and Risk assessments.MUST HAVE qualifications:• Technology diploma, Engineering degree, or experience with Enbridge records• Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsNICE TO HAVE qualifications:• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Knowledge of Enbridge Gas Inc. policy and procedures• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesPlease send your resume in confidence to paul.dusome@randstad.caQualifications• Technology diploma, Engineering degree, • Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsSummaryResponsibilities:The role resides in the Integrity Data Assessment team in Integrity which focuses on risk modelling and assessment, data governance, and software administration for all types of assets in Integrity.This contract position will be dedicated to a multi-year integration project to integrate Legacy Union TIMP pipelines into the Pipeline Risk and Integrity Management (PRIM) software; the team is looking for a highly motivated and technically sound Engineering Analyst to perform the following duties:• Conduct detailed checks of converted pipeline dataset to ensure they meet reporting standards and accurately reflect the pipeline specifications• Review Engineering drawings, bill of materials, other company records to validate pipeline specifications• Review and assess pipeline Non-Destructive Testing (NDT) records and digitize pertinent information using the PRIM software package.• Create and manipulate GIS dataset using satellite imagery and basic tools in ESRI ArcMap software package• Obtain a technical understanding of Integrity documents and processes to drive improvements to the data supporting Integrity and Risk assessments.MUST HAVE qualifications:• Technology diploma, Engineering degree, or experience with Enbridge records• Ability to read and comprehend technical documents, engineering drawings, and as-built construction drawings• Technically inclined with ability to understand and solve problems by formulating conclusions based on various data inputs• A high level of attention to detail and capable of quickly and independently learning new processes• Strong sense of organization and planning• Proficient in the use of Word, Excel, PowerPoint, and ability to self-learn new software platformsNICE TO HAVE qualifications:• Previous experience in Records Management, Pipeline/Materials engineering, or Integrity• Knowledge of Enbridge Gas Inc. policy and procedures• Experience with Enbridge systems such as GIS, SAP, Maximo, Projectwise• Experience working with ESRI ArcMap or Google Earth• Proficient in VB Script and SQL coding languagesPlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      Duties & Responsibilities:• Work closely with engineers to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines.• Demonstrate strong work ethic in all areasMUST HAVE qualifications:• 7+ years of technical communications experience in an engineering, IT, or technical environment.• Solid understanding of single-sourcing principles and structured and topic-based authoring.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.• Familiarity with version control systems or component content management systems (Ixiasoft DITA CMS preferred).• Experience with Adobe Technical Communication Suite, including Photoshop, Illustrator, and InDesign.• Familiarity with SharePoint, XML, HTML, CSS is strongly desired.• Ability to work collaboratively in a sharing, supporting team environment.• University degree in any area of study and Technical Communications certificateNICE TO HAVE qualifications:• Expert editorial, grammar, and structured authoring knowledge.• Experience producing content across multiple channels.Please send your resume in confidence to paul.dusome@randstad.caAdvantages• Expert editorial, grammar, and structured authoring knowledge.• Experience producing content across multiple channels.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.ResponsibilitiesDuties & Responsibilities:• Work closely with engineers to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines.• Demonstrate strong work ethic in all areasMUST HAVE qualifications:• 7+ years of technical communications experience in an engineering, IT, or technical environment.• Solid understanding of single-sourcing principles and structured and topic-based authoring.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.• Familiarity with version control systems or component content management systems (Ixiasoft DITA CMS preferred).• Experience with Adobe Technical Communication Suite, including Photoshop, Illustrator, and InDesign.• Familiarity with SharePoint, XML, HTML, CSS is strongly desired.• Ability to work collaboratively in a sharing, supporting team environment.• University degree in any area of study and Technical Communications certificateNICE TO HAVE qualifications:• Expert editorial, grammar, and structured authoring knowledge.• Experience producing content across multiple channels.Please send your resume in confidence to paul.dusome@randstad.caQualifications• 7+ years of technical communications experience in an engineering, IT, or technical environment.• Solid understanding of single-sourcing principles and structured and topic-based authoring.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.SummaryDuties & Responsibilities:• Work closely with engineers to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines.• Demonstrate strong work ethic in all areasMUST HAVE qualifications:• 7+ years of technical communications experience in an engineering, IT, or technical environment.• Solid understanding of single-sourcing principles and structured and topic-based authoring.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.• Familiarity with version control systems or component content management systems (Ixiasoft DITA CMS preferred).• Experience with Adobe Technical Communication Suite, including Photoshop, Illustrator, and InDesign.• Familiarity with SharePoint, XML, HTML, CSS is strongly desired.• Ability to work collaboratively in a sharing, supporting team environment.• University degree in any area of study and Technical Communications certificateNICE TO HAVE qualifications:• Expert editorial, grammar, and structured authoring knowledge.• Experience producing content across multiple channels.Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Duties & Responsibilities:• Work closely with engineers to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines.• Demonstrate strong work ethic in all areasMUST HAVE qualifications:• 7+ years of technical communications experience in an engineering, IT, or technical environment.• Solid understanding of single-sourcing principles and structured and topic-based authoring.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.• Familiarity with version control systems or component content management systems (Ixiasoft DITA CMS preferred).• Experience with Adobe Technical Communication Suite, including Photoshop, Illustrator, and InDesign.• Familiarity with SharePoint, XML, HTML, CSS is strongly desired.• Ability to work collaboratively in a sharing, supporting team environment.• University degree in any area of study and Technical Communications certificateNICE TO HAVE qualifications:• Expert editorial, grammar, and structured authoring knowledge.• Experience producing content across multiple channels.Please send your resume in confidence to paul.dusome@randstad.caAdvantages• Expert editorial, grammar, and structured authoring knowledge.• Experience producing content across multiple channels.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.ResponsibilitiesDuties & Responsibilities:• Work closely with engineers to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines.• Demonstrate strong work ethic in all areasMUST HAVE qualifications:• 7+ years of technical communications experience in an engineering, IT, or technical environment.• Solid understanding of single-sourcing principles and structured and topic-based authoring.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.• Familiarity with version control systems or component content management systems (Ixiasoft DITA CMS preferred).• Experience with Adobe Technical Communication Suite, including Photoshop, Illustrator, and InDesign.• Familiarity with SharePoint, XML, HTML, CSS is strongly desired.• Ability to work collaboratively in a sharing, supporting team environment.• University degree in any area of study and Technical Communications certificateNICE TO HAVE qualifications:• Expert editorial, grammar, and structured authoring knowledge.• Experience producing content across multiple channels.Please send your resume in confidence to paul.dusome@randstad.caQualifications• 7+ years of technical communications experience in an engineering, IT, or technical environment.• Solid understanding of single-sourcing principles and structured and topic-based authoring.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.SummaryDuties & Responsibilities:• Work closely with engineers to create and publish technical standards, procedures, and other documentation to support the design, construction, and maintenance of natural gas distribution systems.• Understand and translate complex technical concepts into clear, concise, and accurate technical documentation targeting a wide range of audiences.• Ensure that engineering documentation and communications follow established writing rules, company standards, and legal requirements.• Contribute to the maintenance and upkeep of the writing style guide, document templates, and other internal processes and standards.• Perform copy/edit and provide suggestions for improving structure, presentation, and delivery of content to end-users to resolve information gaps and inconsistencies.• Create and update technical illustrations, graphics, and job aids as needed.• Provide guidance on technical writing principles to other members of the CM team and across Engineering as needed.• Provide suggestions for continuous improvement of existing department standards and processes.• Manage multiple streams of work and parallel deadlines.• Demonstrate strong work ethic in all areasMUST HAVE qualifications:• 7+ years of technical communications experience in an engineering, IT, or technical environment.• Solid understanding of single-sourcing principles and structured and topic-based authoring.• Experience creating deliverables in PDF, HTML, and other output formats.• DITA authoring experience and experience with oXygen XML Editor is strongly desired.• Familiarity with version control systems or component content management systems (Ixiasoft DITA CMS preferred).• Experience with Adobe Technical Communication Suite, including Photoshop, Illustrator, and InDesign.• Familiarity with SharePoint, XML, HTML, CSS is strongly desired.• Ability to work collaboratively in a sharing, supporting team environment.• University degree in any area of study and Technical Communications certificateNICE TO HAVE qualifications:• Expert editorial, grammar, and structured authoring knowledge.• Experience producing content across multiple channels.Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Contract
      • Create, manage, and maintain integrity assessment programs and plans to ensure Enbridge Gas’ storage wells remain safe, environmentally responsible, reliable, and in compliance with the requirements of applicable standards and regulations.• Provides technical support on integrity matters, including consultation on designs and procedures.• Development of engineering standards and procedures related to underground storage assets.• Provides analysis and recommendations for asset management related to storage assets.• Completes engineering evaluations of storage assets and provides recommendations for enhancement through maintenance and expansion projects.• Maintenance of asset records for underground storage wells.Education:A degree in Mechanical or Chemical Engineering Registered as an EIT Please send your resume in confidence to paul.dusome@randstad.caAdvantagesCurrent or previous experience in gas distribution or oil & gas Registered as an EIT Responsibilities• Create, manage, and maintain integrity assessment programs and plans to ensure Enbridge Gas’ storage wells remain safe, environmentally responsible, reliable, and in compliance with the requirements of applicable standards and regulations.• Provides technical support on integrity matters, including consultation on designs and procedures.• Development of engineering standards and procedures related to underground storage assets.• Provides analysis and recommendations for asset management related to storage assets.• Completes engineering evaluations of storage assets and provides recommendations for enhancement through maintenance and expansion projects.• Maintenance of asset records for underground storage wells.Education:A degree in Mechanical or Chemical Engineering Registered as an EIT Please send your resume in confidence to paul.dusome@randstad.caQualificationsEducation:A degree in Mechanical or Chemical Engineering Registered as an EIT Summary• Create, manage, and maintain integrity assessment programs and plans to ensure Enbridge Gas’ storage wells remain safe, environmentally responsible, reliable, and in compliance with the requirements of applicable standards and regulations.• Provides technical support on integrity matters, including consultation on designs and procedures.• Development of engineering standards and procedures related to underground storage assets.• Provides analysis and recommendations for asset management related to storage assets.• Completes engineering evaluations of storage assets and provides recommendations for enhancement through maintenance and expansion projects.• Maintenance of asset records for underground storage wells.Education:A degree in Mechanical or Chemical Engineering Registered as an EIT Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Create, manage, and maintain integrity assessment programs and plans to ensure Enbridge Gas’ storage wells remain safe, environmentally responsible, reliable, and in compliance with the requirements of applicable standards and regulations.• Provides technical support on integrity matters, including consultation on designs and procedures.• Development of engineering standards and procedures related to underground storage assets.• Provides analysis and recommendations for asset management related to storage assets.• Completes engineering evaluations of storage assets and provides recommendations for enhancement through maintenance and expansion projects.• Maintenance of asset records for underground storage wells.Education:A degree in Mechanical or Chemical Engineering Registered as an EIT Please send your resume in confidence to paul.dusome@randstad.caAdvantagesCurrent or previous experience in gas distribution or oil & gas Registered as an EIT Responsibilities• Create, manage, and maintain integrity assessment programs and plans to ensure Enbridge Gas’ storage wells remain safe, environmentally responsible, reliable, and in compliance with the requirements of applicable standards and regulations.• Provides technical support on integrity matters, including consultation on designs and procedures.• Development of engineering standards and procedures related to underground storage assets.• Provides analysis and recommendations for asset management related to storage assets.• Completes engineering evaluations of storage assets and provides recommendations for enhancement through maintenance and expansion projects.• Maintenance of asset records for underground storage wells.Education:A degree in Mechanical or Chemical Engineering Registered as an EIT Please send your resume in confidence to paul.dusome@randstad.caQualificationsEducation:A degree in Mechanical or Chemical Engineering Registered as an EIT Summary• Create, manage, and maintain integrity assessment programs and plans to ensure Enbridge Gas’ storage wells remain safe, environmentally responsible, reliable, and in compliance with the requirements of applicable standards and regulations.• Provides technical support on integrity matters, including consultation on designs and procedures.• Development of engineering standards and procedures related to underground storage assets.• Provides analysis and recommendations for asset management related to storage assets.• Completes engineering evaluations of storage assets and provides recommendations for enhancement through maintenance and expansion projects.• Maintenance of asset records for underground storage wells.Education:A degree in Mechanical or Chemical Engineering Registered as an EIT Please send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Concord, Ontario
      • Permanent
      Are you experienced in Automotive Electronics?Are you looking for a career change?Will a dynamic, growing company that's a leader in it's segment be appealing?If so, this could be the opportunity for you!JOB DESCRIPTION:• Develop microcontroller and embedded systems for the control of HVAC systems• Develop embedded software for next generation control systems with a focus on IOT• Electrical, power management and control systems for HVAC products• Produce detailed electronic schematics, BOM’s, drawings, documentation, verification and test plans specific to customer and project requirements• Liaison and periodic travel to end customers• Will liaison with vendors for technical information and specifications• Assign part and drawing numbers and create BOM’s• Identify electrical/electronic components, connectors and wiring required too be used in new and existing products• Assist in fabrication of prototypes testing and samples for production when required• Participate in preparation of bid/proposal documents• Product qualification testingAdvantagesPosition is eligible for 2% RRSP matching, and medical/dental benefits in 3 monthsResponsibilities• Develop microcontroller and embedded systems for the control of HVAC systems• Develop embedded software for next generation control systems with a focus on IOT• Electrical, power management and control systems for HVAC products• Produce detailed electronic schematics, BOM’s, drawings, documentation, verification and test plans specific tocustomer and project requirements• Liaison and periodic travel to end customers• Will liaison with vendors for technical information and specifications• Assign part and drawing numbers and create BOM’s• Identify electrical/electronic components, connectors and wiring required too be used in new and existingproducts• Assist in fabrication of prototypes testing and samples for production when required• Participate in preparation of bid/proposal documents• Product qualification testingQualificationsEDUCATION:• Bachelor’s Degree in Electrical EngineeringYEARS OF EXPERIENCE:5 – 10 years of experience in electrical engineering.REQUIRED KNOWLEDGE:• 5 to 10 years experience in electronic Hardware and software development• Familiarity with control systems• IOT experience required• Knowledge of automotive communication protocols like CAN and LIN.• PCB layout• Proven electrical and electronic design skills with expertise in at least one EDA tool.• Preference is Microchip PIC• Solid programming background with experience in C for microcontrollers. Visual Studio required.• Able to work independently in a fast paced environment• Extensive knowledge of electrical/electronic systems and basic knowledge of mechanical systems• Thorough knowledge of 12v/24v DC and low voltage AC (120, 220, 400 VAC etc.) components and associated wiring• Self starter, must be able to identify the next sequential task• Familiar with MS Office• Able to use MRP/ERP System• Exposure to Military or other government projects• Able to read/interpret government specsSummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you experienced in Automotive Electronics?Are you looking for a career change?Will a dynamic, growing company that's a leader in it's segment be appealing?If so, this could be the opportunity for you!JOB DESCRIPTION:• Develop microcontroller and embedded systems for the control of HVAC systems• Develop embedded software for next generation control systems with a focus on IOT• Electrical, power management and control systems for HVAC products• Produce detailed electronic schematics, BOM’s, drawings, documentation, verification and test plans specific to customer and project requirements• Liaison and periodic travel to end customers• Will liaison with vendors for technical information and specifications• Assign part and drawing numbers and create BOM’s• Identify electrical/electronic components, connectors and wiring required too be used in new and existing products• Assist in fabrication of prototypes testing and samples for production when required• Participate in preparation of bid/proposal documents• Product qualification testingAdvantagesPosition is eligible for 2% RRSP matching, and medical/dental benefits in 3 monthsResponsibilities• Develop microcontroller and embedded systems for the control of HVAC systems• Develop embedded software for next generation control systems with a focus on IOT• Electrical, power management and control systems for HVAC products• Produce detailed electronic schematics, BOM’s, drawings, documentation, verification and test plans specific tocustomer and project requirements• Liaison and periodic travel to end customers• Will liaison with vendors for technical information and specifications• Assign part and drawing numbers and create BOM’s• Identify electrical/electronic components, connectors and wiring required too be used in new and existingproducts• Assist in fabrication of prototypes testing and samples for production when required• Participate in preparation of bid/proposal documents• Product qualification testingQualificationsEDUCATION:• Bachelor’s Degree in Electrical EngineeringYEARS OF EXPERIENCE:5 – 10 years of experience in electrical engineering.REQUIRED KNOWLEDGE:• 5 to 10 years experience in electronic Hardware and software development• Familiarity with control systems• IOT experience required• Knowledge of automotive communication protocols like CAN and LIN.• PCB layout• Proven electrical and electronic design skills with expertise in at least one EDA tool.• Preference is Microchip PIC• Solid programming background with experience in C for microcontrollers. Visual Studio required.• Able to work independently in a fast paced environment• Extensive knowledge of electrical/electronic systems and basic knowledge of mechanical systems• Thorough knowledge of 12v/24v DC and low voltage AC (120, 220, 400 VAC etc.) components and associated wiring• Self starter, must be able to identify the next sequential task• Familiar with MS Office• Able to use MRP/ERP System• Exposure to Military or other government projects• Able to read/interpret government specsSummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Morriston, Ontario
      • Contract
      Looking for New Grads with a background in Chemistry!!Are you a new grad from a post secondary program in Chemistry (or related field)? Are you open to contract opportunities to gain experience? If so, this position could be for you! Our client in the Guelph area has partnered with Randstad Engineering in their search for contract Lab Support. AdvantagesThis is a short term contract opportunity, but with potential for extension!ResponsibilitiesIn this contract position, you would be working closely with the Quality and Food Safety team, providing lab support and completing various tasks. Qualifications•Post secondary education within Chemistry (or related field)•Hard working •Able to complete tasks with minimal supervision •Flexible to work a short term contract positionSummaryIf you are interested in this opportunity, apply today! We are excited to discuss this opportunity further with you! Please send your resume to Swapna Nair at swapna.nair@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Looking for New Grads with a background in Chemistry!!Are you a new grad from a post secondary program in Chemistry (or related field)? Are you open to contract opportunities to gain experience? If so, this position could be for you! Our client in the Guelph area has partnered with Randstad Engineering in their search for contract Lab Support. AdvantagesThis is a short term contract opportunity, but with potential for extension!ResponsibilitiesIn this contract position, you would be working closely with the Quality and Food Safety team, providing lab support and completing various tasks. Qualifications•Post secondary education within Chemistry (or related field)•Hard working •Able to complete tasks with minimal supervision •Flexible to work a short term contract positionSummaryIf you are interested in this opportunity, apply today! We are excited to discuss this opportunity further with you! Please send your resume to Swapna Nair at swapna.nair@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Burford, Ontario
      • Permanent
      Our client in Brantford, ON has partnered with Randstad Engineering in their search for a Chief Operating Officer - COO, for their busy up-and-coming Real Estate Investment firm in the Golden Horseshoe Area. If you have a pressing need for growth, a fast paced environment and the ability to take operational control of a rapidly growing service business, we want to speak with you!AdvantagesThis is a permanent opportunity with a profitable Real Estate Investment firm that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, performance bonuses, Benefits, Vacation, Travel Expenses and Flexibility.Responsibilities•Corporate management and financial planning and strategy, including budget development•Strategic planning and vision and promotion of process improvement•Marketing and business development as required•Acts as a strategic partner on the leadership team and works closely with the team to ensure they are meeting performance expectations.•Provides timely, accurate and complete reports on the operating condition of the company.•Work autonomously while ensuring CEO expectations are readily met and exceeded.Qualifications•Bachelor’s degree in business, accounting, finance, or a related field required•Understanding of Land Development principles•Minimum of 5 years of management experience, with demonstrated strategic leadership ability•Minimum of 2 years of executive or C-suite level experience•Understanding of the industry including risk management, compliance, and regulatory requirements•Understanding of accounting principles including budgeting, balance sheets, income statements, cash flow, and capital planning managementSummaryIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our client in Brantford, ON has partnered with Randstad Engineering in their search for a Chief Operating Officer - COO, for their busy up-and-coming Real Estate Investment firm in the Golden Horseshoe Area. If you have a pressing need for growth, a fast paced environment and the ability to take operational control of a rapidly growing service business, we want to speak with you!AdvantagesThis is a permanent opportunity with a profitable Real Estate Investment firm that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, performance bonuses, Benefits, Vacation, Travel Expenses and Flexibility.Responsibilities•Corporate management and financial planning and strategy, including budget development•Strategic planning and vision and promotion of process improvement•Marketing and business development as required•Acts as a strategic partner on the leadership team and works closely with the team to ensure they are meeting performance expectations.•Provides timely, accurate and complete reports on the operating condition of the company.•Work autonomously while ensuring CEO expectations are readily met and exceeded.Qualifications•Bachelor’s degree in business, accounting, finance, or a related field required•Understanding of Land Development principles•Minimum of 5 years of management experience, with demonstrated strategic leadership ability•Minimum of 2 years of executive or C-suite level experience•Understanding of the industry including risk management, compliance, and regulatory requirements•Understanding of accounting principles including budgeting, balance sheets, income statements, cash flow, and capital planning managementSummaryIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Ottawa, Ontario
      • Permanent
      Are you an expert in machine designing and the development of automated industrial robotic manufacturing lines?Do you have an organized mindset with the ability to work independently?We are looking to hire a Senior or Intermediate Robotics Integration Engineer for one of our clients who is a fast-growing company based out of the Ottawa area.AdvantagesCompetitive salary based on demonstrated work experience.• Performance Bonus.• Vacation• Flexible work environmentResponsibilities• Demonstrated experience integrating and programing industrial and collaborative robots.• Demonstrated experience selecting, integrating, and programing machine vision systems.• Demonstrated experience in robotic automation manufacturing lines: requirement definition,conceptual design, 3D modeling/drafting, vendor coordination, assembly, and commissioning.• Demonstrated experience managing +1M$ contract.QualificationsUniversity or college degree in Mechanical or Mechatronic Engineering• Minimum 5 years experience in industrial automation design or robotics integration.• Minimum 3 years of experience integrating industrial robotics.• Minimum of 3 years of experience using SolidWorks to create +1000 part models.• Natural problem solver with a positive can-do attitude.• Able to lead, good communication, organization, and decision-making skills.• Client facing experience. Junior Mentoring Experience. SummaryIf this sounds like your next move then Apply online or send your resume directly to swapna.nair@randstad.caONLY QUALIFIED CANDIDATES WILL BE CONTACTED.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you an expert in machine designing and the development of automated industrial robotic manufacturing lines?Do you have an organized mindset with the ability to work independently?We are looking to hire a Senior or Intermediate Robotics Integration Engineer for one of our clients who is a fast-growing company based out of the Ottawa area.AdvantagesCompetitive salary based on demonstrated work experience.• Performance Bonus.• Vacation• Flexible work environmentResponsibilities• Demonstrated experience integrating and programing industrial and collaborative robots.• Demonstrated experience selecting, integrating, and programing machine vision systems.• Demonstrated experience in robotic automation manufacturing lines: requirement definition,conceptual design, 3D modeling/drafting, vendor coordination, assembly, and commissioning.• Demonstrated experience managing +1M$ contract.QualificationsUniversity or college degree in Mechanical or Mechatronic Engineering• Minimum 5 years experience in industrial automation design or robotics integration.• Minimum 3 years of experience integrating industrial robotics.• Minimum of 3 years of experience using SolidWorks to create +1000 part models.• Natural problem solver with a positive can-do attitude.• Able to lead, good communication, organization, and decision-making skills.• Client facing experience. Junior Mentoring Experience. SummaryIf this sounds like your next move then Apply online or send your resume directly to swapna.nair@randstad.caONLY QUALIFIED CANDIDATES WILL BE CONTACTED.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Concord, Ontario
      • Permanent
      We are looking to hire a Health and Safety Specialist for one of our leading global manufacturing clients in the Vaughan area.The incumbent would be leading the development of long and short-term health and safety strategies and objectives to meet future needs and growth opportunities of Divisions. Must be able to develop and maintain health and safety programs, procedures, and policies based on new and existing regulations as well as sound safety methodology. Participates in ongoing development, communication, and implementation of new programs and policies.AdvantagesGlobal companySole role in the plant, so to of exposure!Competitive salaryBonusVacationBenefitsResponsibilities• Develops, reviews, and manages departmental budget and expenses for materials, equipment, travel, etc., ensuring conformity to the financial plan.• Develops and delivers necessary safety training for Division in accord with established law, regulation, or policies, practices, and programs.• Ensures adherence to established quality, safety, and housekeeping standards.• Seeks out and corrects unsafe acts and hazardous conditions, ensuring all safety and non-safety plant rules and regulations are followed.• Provides feedback to all levels of Management on Safety KPIs.• Conducts industrial hygiene monitoring and reports results accordingly.• Follows and implements duties including those specified under the Occupational Health and Safety Act.• Serves as primary contact with, and liaison to, governmental and regulatory agencies, 3rd party ISO 14001 audit firms.• Reviews and adheres to all health and safety, environmental, and quality standards, policies, and procedures.• Liaison with Ministry of Labour (MOL), OHSA, WSIB, and Ministry of Environment (MOE) personnel.• Responsible for managing workers' compensation case management and member of return to work program (WSIB).• Leads manages, and/or monitors activities of the Division's Health & Safety Committees. Acts as primary designate to respond to safety-related issues and concerns raised by employees or management and creates plans to emend violations/hazards.• Responds immediately to items brought to his/her attention with respect to hazards, defects, incidents, or non-compliance issues.• Performs all work in compliance with the Divisions Health and Safety policies and procedures as well as all Country and local laws; promptly report any hazardous condition or workplace injury.• Reviews all accident/incident reports and recommends corrective actions• Adopt Kaizen principles and concepts, participate in GEAR activities, and model behaviours that cultivate safe working conditions, quality, customer value, performance, and integrity.• Follow all general, department, and position procedures that are applicable to this role as indicated in the level III procedure manual.• Adhere to and work in compliance with legislative requirements of IATF16949 and ISO14001 standards.• Performs other reasonable duties as directedQualifications• Bachelor's degree in Occupational Safety or a related field, or demonstrated experience.• CRSP or equivalent professional designation is preferred.• 5 years of professional experience in a manufacturing or related environment.• 2 years of health and safety program management experience in a highly automated, 3 shift production operation desired• Demonstrated success designing and implementing a robust ergonomics program• Proficient with Microsoft suite of programs• Experience with WSIBSummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna Nair at swapna.nair@randstad.caThank you for applying for the role. We’ll review your application and connect shortly if you meet all the requirements. Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      We are looking to hire a Health and Safety Specialist for one of our leading global manufacturing clients in the Vaughan area.The incumbent would be leading the development of long and short-term health and safety strategies and objectives to meet future needs and growth opportunities of Divisions. Must be able to develop and maintain health and safety programs, procedures, and policies based on new and existing regulations as well as sound safety methodology. Participates in ongoing development, communication, and implementation of new programs and policies.AdvantagesGlobal companySole role in the plant, so to of exposure!Competitive salaryBonusVacationBenefitsResponsibilities• Develops, reviews, and manages departmental budget and expenses for materials, equipment, travel, etc., ensuring conformity to the financial plan.• Develops and delivers necessary safety training for Division in accord with established law, regulation, or policies, practices, and programs.• Ensures adherence to established quality, safety, and housekeeping standards.• Seeks out and corrects unsafe acts and hazardous conditions, ensuring all safety and non-safety plant rules and regulations are followed.• Provides feedback to all levels of Management on Safety KPIs.• Conducts industrial hygiene monitoring and reports results accordingly.• Follows and implements duties including those specified under the Occupational Health and Safety Act.• Serves as primary contact with, and liaison to, governmental and regulatory agencies, 3rd party ISO 14001 audit firms.• Reviews and adheres to all health and safety, environmental, and quality standards, policies, and procedures.• Liaison with Ministry of Labour (MOL), OHSA, WSIB, and Ministry of Environment (MOE) personnel.• Responsible for managing workers' compensation case management and member of return to work program (WSIB).• Leads manages, and/or monitors activities of the Division's Health & Safety Committees. Acts as primary designate to respond to safety-related issues and concerns raised by employees or management and creates plans to emend violations/hazards.• Responds immediately to items brought to his/her attention with respect to hazards, defects, incidents, or non-compliance issues.• Performs all work in compliance with the Divisions Health and Safety policies and procedures as well as all Country and local laws; promptly report any hazardous condition or workplace injury.• Reviews all accident/incident reports and recommends corrective actions• Adopt Kaizen principles and concepts, participate in GEAR activities, and model behaviours that cultivate safe working conditions, quality, customer value, performance, and integrity.• Follow all general, department, and position procedures that are applicable to this role as indicated in the level III procedure manual.• Adhere to and work in compliance with legislative requirements of IATF16949 and ISO14001 standards.• Performs other reasonable duties as directedQualifications• Bachelor's degree in Occupational Safety or a related field, or demonstrated experience.• CRSP or equivalent professional designation is preferred.• 5 years of professional experience in a manufacturing or related environment.• 2 years of health and safety program management experience in a highly automated, 3 shift production operation desired• Demonstrated success designing and implementing a robust ergonomics program• Proficient with Microsoft suite of programs• Experience with WSIBSummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna Nair at swapna.nair@randstad.caThank you for applying for the role. We’ll review your application and connect shortly if you meet all the requirements. Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • North York, Ontario
      • Permanent
      Planning CoordinatorEssential Responsibilities & DutiesEnsure all applications (Rezoning, Development Permits, Minor DP Amendments, etc.) are accurately completed, and all documentation for submission is prepared/ready for submissionMaintain appropriate records and files for each project, including project proformas, project reports, meeting minutes, drawings, or other documents as required·Support Development Managers in coordinating consultants and/or internal team project communication and inputs (e.g. architecture, engineering, sales, marketing, etc.)Coordinate neighbourhood engagement meetings or other community outreach;Conduct market analyses and keep the development team informed of market conditions by maintaining and summarizing key market statistics and indicators;Maintain a summary of competition within the local market and support ongoing market-research needsHelp coordinate Disclosure Statement requirements and subsequent amendments as necessary;Draft, submit and review RFPs for consultants.Evaluate drawing revisions for accuracy and completionSupport the Development Managers in allocating and coding project invoices and costsOther duties as assigned.Requirements:Post-secondary degree diploma in Business, Commerce, Economics Architecture, Urban Planning, or related field;Outstanding organizational and time management skills with the ability to meet deadlinesExcellent verbal and written communication skills.Proficiency with MS Office 365; proficiency with SketchUp or similar software considered an assetDemonstrated ability to read blueprintsDemonstrated ability to be reliable, positive, responsive, and results focusedAbility to anticipate needs and deliver on commitmentsAbility to multitask and prioritize daily workloadPossess a valid drivers licensePlease send your resume in confidence to paul.dusome@randstad.caAdvantagesConduct market analyses and keep the development team informed of market conditions by maintaining and summarizing key market statistics and indicators;Draft, submit and review RFPs for consultants.Evaluate drawing revisions for accuracy and completionResponsibilitiesPlanning CoordinatorEssential Responsibilities & DutiesEnsure all applications (Rezoning, Development Permits, Minor DP Amendments, etc.) are accurately completed, and all documentation for submission is prepared/ready for submissionMaintain appropriate records and files for each project, including project proformas, project reports, meeting minutes, drawings, or other documents as required·Support Development Managers in coordinating consultants and/or internal team project communication and inputs (e.g. architecture, engineering, sales, marketing, etc.)Coordinate neighbourhood engagement meetings or other community outreach;Conduct market analyses and keep the development team informed of market conditions by maintaining and summarizing key market statistics and indicators;Maintain a summary of competition within the local market and support ongoing market-research needsHelp coordinate Disclosure Statement requirements and subsequent amendments as necessary;Draft, submit and review RFPs for consultants.Evaluate drawing revisions for accuracy and completionSupport the Development Managers in allocating and coding project invoices and costsOther duties as assigned.Requirements:Post-secondary degree diploma in Business, Commerce, Economics Architecture, Urban Planning, or related field;Outstanding organizational and time management skills with the ability to meet deadlinesExcellent verbal and written communication skills.Proficiency with MS Office 365; proficiency with SketchUp or similar software considered an assetDemonstrated ability to read blueprintsDemonstrated ability to be reliable, positive, responsive, and results focusedAbility to anticipate needs and deliver on commitmentsAbility to multitask and prioritize daily workloadPossess a valid drivers licensePlease send your resume in confidence to paul.dusome@randstad.caQualificationsPost-secondary degree diploma in Business, Commerce, Economics Architecture, Urban Planning, or related fieldProficiency with MS Office 365; proficiency with SketchUp or similar software considered an assetDemonstrated ability to read blueprintsSummaryPlanning CoordinatorEssential Responsibilities & DutiesEnsure all applications (Rezoning, Development Permits, Minor DP Amendments, etc.) are accurately completed, and all documentation for submission is prepared/ready for submissionMaintain appropriate records and files for each project, including project proformas, project reports, meeting minutes, drawings, or other documents as required·Support Development Managers in coordinating consultants and/or internal team project communication and inputs (e.g. architecture, engineering, sales, marketing, etc.)Coordinate neighbourhood engagement meetings or other community outreach;Conduct market analyses and keep the development team informed of market conditions by maintaining and summarizing key market statistics and indicators;Maintain a summary of competition within the local market and support ongoing market-research needsHelp coordinate Disclosure Statement requirements and subsequent amendments as necessary;Draft, submit and review RFPs for consultants.Evaluate drawing revisions for accuracy and completionSupport the Development Managers in allocating and coding project invoices and costsOther duties as assigned.Requirements:Post-secondary degree diploma in Business, Commerce, Economics Architecture, Urban Planning, or related field;Outstanding organizational and time management skills with the ability to meet deadlinesExcellent verbal and written communication skills.Proficiency with MS Office 365; proficiency with SketchUp or similar software considered an assetDemonstrated ability to read blueprintsDemonstrated ability to be reliable, positive, responsive, and results focusedAbility to anticipate needs and deliver on commitmentsAbility to multitask and prioritize daily workloadPossess a valid drivers licensePlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Planning CoordinatorEssential Responsibilities & DutiesEnsure all applications (Rezoning, Development Permits, Minor DP Amendments, etc.) are accurately completed, and all documentation for submission is prepared/ready for submissionMaintain appropriate records and files for each project, including project proformas, project reports, meeting minutes, drawings, or other documents as required·Support Development Managers in coordinating consultants and/or internal team project communication and inputs (e.g. architecture, engineering, sales, marketing, etc.)Coordinate neighbourhood engagement meetings or other community outreach;Conduct market analyses and keep the development team informed of market conditions by maintaining and summarizing key market statistics and indicators;Maintain a summary of competition within the local market and support ongoing market-research needsHelp coordinate Disclosure Statement requirements and subsequent amendments as necessary;Draft, submit and review RFPs for consultants.Evaluate drawing revisions for accuracy and completionSupport the Development Managers in allocating and coding project invoices and costsOther duties as assigned.Requirements:Post-secondary degree diploma in Business, Commerce, Economics Architecture, Urban Planning, or related field;Outstanding organizational and time management skills with the ability to meet deadlinesExcellent verbal and written communication skills.Proficiency with MS Office 365; proficiency with SketchUp or similar software considered an assetDemonstrated ability to read blueprintsDemonstrated ability to be reliable, positive, responsive, and results focusedAbility to anticipate needs and deliver on commitmentsAbility to multitask and prioritize daily workloadPossess a valid drivers licensePlease send your resume in confidence to paul.dusome@randstad.caAdvantagesConduct market analyses and keep the development team informed of market conditions by maintaining and summarizing key market statistics and indicators;Draft, submit and review RFPs for consultants.Evaluate drawing revisions for accuracy and completionResponsibilitiesPlanning CoordinatorEssential Responsibilities & DutiesEnsure all applications (Rezoning, Development Permits, Minor DP Amendments, etc.) are accurately completed, and all documentation for submission is prepared/ready for submissionMaintain appropriate records and files for each project, including project proformas, project reports, meeting minutes, drawings, or other documents as required·Support Development Managers in coordinating consultants and/or internal team project communication and inputs (e.g. architecture, engineering, sales, marketing, etc.)Coordinate neighbourhood engagement meetings or other community outreach;Conduct market analyses and keep the development team informed of market conditions by maintaining and summarizing key market statistics and indicators;Maintain a summary of competition within the local market and support ongoing market-research needsHelp coordinate Disclosure Statement requirements and subsequent amendments as necessary;Draft, submit and review RFPs for consultants.Evaluate drawing revisions for accuracy and completionSupport the Development Managers in allocating and coding project invoices and costsOther duties as assigned.Requirements:Post-secondary degree diploma in Business, Commerce, Economics Architecture, Urban Planning, or related field;Outstanding organizational and time management skills with the ability to meet deadlinesExcellent verbal and written communication skills.Proficiency with MS Office 365; proficiency with SketchUp or similar software considered an assetDemonstrated ability to read blueprintsDemonstrated ability to be reliable, positive, responsive, and results focusedAbility to anticipate needs and deliver on commitmentsAbility to multitask and prioritize daily workloadPossess a valid drivers licensePlease send your resume in confidence to paul.dusome@randstad.caQualificationsPost-secondary degree diploma in Business, Commerce, Economics Architecture, Urban Planning, or related fieldProficiency with MS Office 365; proficiency with SketchUp or similar software considered an assetDemonstrated ability to read blueprintsSummaryPlanning CoordinatorEssential Responsibilities & DutiesEnsure all applications (Rezoning, Development Permits, Minor DP Amendments, etc.) are accurately completed, and all documentation for submission is prepared/ready for submissionMaintain appropriate records and files for each project, including project proformas, project reports, meeting minutes, drawings, or other documents as required·Support Development Managers in coordinating consultants and/or internal team project communication and inputs (e.g. architecture, engineering, sales, marketing, etc.)Coordinate neighbourhood engagement meetings or other community outreach;Conduct market analyses and keep the development team informed of market conditions by maintaining and summarizing key market statistics and indicators;Maintain a summary of competition within the local market and support ongoing market-research needsHelp coordinate Disclosure Statement requirements and subsequent amendments as necessary;Draft, submit and review RFPs for consultants.Evaluate drawing revisions for accuracy and completionSupport the Development Managers in allocating and coding project invoices and costsOther duties as assigned.Requirements:Post-secondary degree diploma in Business, Commerce, Economics Architecture, Urban Planning, or related field;Outstanding organizational and time management skills with the ability to meet deadlinesExcellent verbal and written communication skills.Proficiency with MS Office 365; proficiency with SketchUp or similar software considered an assetDemonstrated ability to read blueprintsDemonstrated ability to be reliable, positive, responsive, and results focusedAbility to anticipate needs and deliver on commitmentsAbility to multitask and prioritize daily workloadPossess a valid drivers licensePlease send your resume in confidence to paul.dusome@randstad.caRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Ottawa, Ontario
      • Contract
      Under the supervision of the Manager of Technical Projects & Support; the Mechanical Engineer provides engineeringknowledge to support manufacturing of the existing as well as new products in development.The various manufacturing processes include automated machines incorporating robotics and complex material handling.The engineer will source or design new equipment, systems and components, as well as make updates or improvementsto current equipment. The engineer will prepare documentation packages related to manufacturing equipment such asoperating and maintenance procedures as well as contribute to verification and validation studies, protocols andreports. The engineer will be engaged in supporting and troubleshooting the manufacturing equipment to minimizeproduction interruption and ensure production and quality targets are met. An ideal candidate would be a professional who possesses a breadth of knowledge to be able to work and contribute to different aspects of manufacturing.Advantages6 months contract with potential to be hired perm or further extensionGlobal Brandlots of room for advancementResponsibilitiesDuties and Responsibilities• mechanical engineering support of existing tools and equipment• mechanical design of improvements or new stations and equipment• understand and improve manufacturing processes• develop upgrades to existing automation and roboticQualifications• Bachelors degree or higher in engineering (mechanical preferred)• Experience in working with automation or manufacturing equipment• Preferred knowledge of PLC programming and communications• Ability to perform tolerance and/or measurement analysis• Ability to troubleshoot mechanical as well as electromechanical issues• Excellent oral and written English communication skills• 3-5 years of engineering within manufacturing experience preferredSummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.ca Thank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Under the supervision of the Manager of Technical Projects & Support; the Mechanical Engineer provides engineeringknowledge to support manufacturing of the existing as well as new products in development.The various manufacturing processes include automated machines incorporating robotics and complex material handling.The engineer will source or design new equipment, systems and components, as well as make updates or improvementsto current equipment. The engineer will prepare documentation packages related to manufacturing equipment such asoperating and maintenance procedures as well as contribute to verification and validation studies, protocols andreports. The engineer will be engaged in supporting and troubleshooting the manufacturing equipment to minimizeproduction interruption and ensure production and quality targets are met. An ideal candidate would be a professional who possesses a breadth of knowledge to be able to work and contribute to different aspects of manufacturing.Advantages6 months contract with potential to be hired perm or further extensionGlobal Brandlots of room for advancementResponsibilitiesDuties and Responsibilities• mechanical engineering support of existing tools and equipment• mechanical design of improvements or new stations and equipment• understand and improve manufacturing processes• develop upgrades to existing automation and roboticQualifications• Bachelors degree or higher in engineering (mechanical preferred)• Experience in working with automation or manufacturing equipment• Preferred knowledge of PLC programming and communications• Ability to perform tolerance and/or measurement analysis• Ability to troubleshoot mechanical as well as electromechanical issues• Excellent oral and written English communication skills• 3-5 years of engineering within manufacturing experience preferredSummaryIf this role sounds like a good fit for you please APPLY ONLINE or submit your resume directly to Swapna at swapna.nair@randstad.ca Thank you for applying to the role. We’ll review your application and connect shortly if you meet all the requirements.Good luck!Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • St-Marys, Ontario
      • Permanent
      CASCADESFounded in 1964, Cascades produces, converts and markets packaging and tissue products that are composed mainly of recycled fibers. The Company employs 11,000 employees, who work in more than 90 production units located in North America and Europe. With its management philosophy, half a century of experience in recycling, and continuous efforts in research and development as driving forces, Cascades continues to deliver the innovative products  that customers have come to rely on. CASCADES CONTAINERBOARD PACKAGINGThe Containerboard Packaging Group, a division of Cascades, is the largest containerboard producer in Canada, and is also a top converter of corrugated products in the country. The Group manufactures a wide range of products made from recycled fibres for its North American customers in the food, beverage and consumer products sectors, among many others. The Division, which employs close to 3,400 people, owns six containerboard mills and nineteen corrugated products plants in Canada and the United States.Your challenge!Reporting to the General Manager, the Plant Manager’s mission is to establish his or her unit’s performance standards and achieve the established objectives by developing an action plan that respects business rules and processes as well as best manufacturing practices. You therefore participate in the implementation of specific processes, practices and tools within your unit aimed at optimizing operational efficiency while prioritizing health and safety. You also use your leadership to build a mobilized and competent team and support their production efforts while nurturing a culture of continuous improvement and health and safety. As a result, you promote the achievement of your unit's business objectives by positively influencing the adoption of healthy and safe behaviours, operating costs, performance and production capacity and quality.Individual responsibilities Accountable Ensure the safety of its employees Ensure optimal execution of operations by achieving targets in terms of occupational health and safety, production capacity, standardization of operating costs and quality Ensure compliance with business processes Prepare and execute investment and asset maintenance plans, and meet return on investment targets Engage and develop all your employees Ensure the execution of the Collective Bargaining Agreement/Employee Handbook and highlight areas for improvement with the union/committee Responsible Maintain a safe environment for its employees and eliminate risks Ensure the application of all of Cascades’ processes in the plant in compliance with business rules and established best practices Establish performance standards (availability, efficiency, OEE) in collaboration with the General Manager Lead weekly meetings with your team and SUs to analyze KPIs, and discuss and launch required action plans Collaborate in the implementation of optimization projects specific to your unit Foster a culture of continuous improvement Experiences and strengths Extensive experience in management and in the manufacturing sector Leadership and a collaborative spirit that inspire and engage teams to achieve excellence Ability to understand customer needs, issues and interests in order to develop solutions that support their experience Ability to guide and coach team members Sound judgment to ensure follow-up and effective implementation of solutions in accordance with company priorities and to make appropriate decisions Ability to position oneself with conviction in an unpopular context and generate maximum support. Strong persuasiveness to foster maximum buy-in in a difficult context The knowledge and experience to anticipate the impact of a decision on your unit and employees Strong communication skills, tact and diplomacy Excellent ability to build and support a customer-focused culture based on a people-centred approach Excellent written and spoken English to support professional interactions Agility needed to work with various technological tools Knowledge of SAP software or other ERP (an asset) Core competencies defined for this jobManagerial courageDecision-makingClient-focusCoachingPerspectiveTeam leadershipCascades believes in the success of an inclusive organization that values diversity within its team. All qualified candidates will be considered for this position in a fair manner.Use of the masculine in our communications refers equally to both men and women. 
      CASCADESFounded in 1964, Cascades produces, converts and markets packaging and tissue products that are composed mainly of recycled fibers. The Company employs 11,000 employees, who work in more than 90 production units located in North America and Europe. With its management philosophy, half a century of experience in recycling, and continuous efforts in research and development as driving forces, Cascades continues to deliver the innovative products  that customers have come to rely on. CASCADES CONTAINERBOARD PACKAGINGThe Containerboard Packaging Group, a division of Cascades, is the largest containerboard producer in Canada, and is also a top converter of corrugated products in the country. The Group manufactures a wide range of products made from recycled fibres for its North American customers in the food, beverage and consumer products sectors, among many others. The Division, which employs close to 3,400 people, owns six containerboard mills and nineteen corrugated products plants in Canada and the United States.Your challenge!Reporting to the General Manager, the Plant Manager’s mission is to establish his or her unit’s performance standards and achieve the established objectives by developing an action plan that respects business rules and processes as well as best manufacturing practices. You therefore participate in the implementation of specific processes, practices and tools within your unit aimed at optimizing operational efficiency while prioritizing health and safety. You also use your leadership to build a mobilized and competent team and support their production efforts while nurturing a culture of continuous improvement and health and safety. As a result, you promote the achievement of your unit's business objectives by positively influencing the adoption of healthy and safe behaviours, operating costs, performance and production capacity and quality.Individual responsibilities Accountable Ensure the safety of its employees Ensure optimal execution of operations by achieving targets in terms of occupational health and safety, production capacity, standardization of operating costs and quality Ensure compliance with business processes Prepare and execute investment and asset maintenance plans, and meet return on investment targets Engage and develop all your employees Ensure the execution of the Collective Bargaining Agreement/Employee Handbook and highlight areas for improvement with the union/committee Responsible Maintain a safe environment for its employees and eliminate risks Ensure the application of all of Cascades’ processes in the plant in compliance with business rules and established best practices Establish performance standards (availability, efficiency, OEE) in collaboration with the General Manager Lead weekly meetings with your team and SUs to analyze KPIs, and discuss and launch required action plans Collaborate in the implementation of optimization projects specific to your unit Foster a culture of continuous improvement Experiences and strengths Extensive experience in management and in the manufacturing sector Leadership and a collaborative spirit that inspire and engage teams to achieve excellence Ability to understand customer needs, issues and interests in order to develop solutions that support their experience Ability to guide and coach team members Sound judgment to ensure follow-up and effective implementation of solutions in accordance with company priorities and to make appropriate decisions Ability to position oneself with conviction in an unpopular context and generate maximum support. Strong persuasiveness to foster maximum buy-in in a difficult context The knowledge and experience to anticipate the impact of a decision on your unit and employees Strong communication skills, tact and diplomacy Excellent ability to build and support a customer-focused culture based on a people-centred approach Excellent written and spoken English to support professional interactions Agility needed to work with various technological tools Knowledge of SAP software or other ERP (an asset) Core competencies defined for this jobManagerial courageDecision-makingClient-focusCoachingPerspectiveTeam leadershipCascades believes in the success of an inclusive organization that values diversity within its team. All qualified candidates will be considered for this position in a fair manner.Use of the masculine in our communications refers equally to both men and women. 
      • North York, Ontario
      • Contract
      Development of complete set of working drawings, construction documents, etc., under the direction and support of senior team membersAs a technologist, effectively communicate with other team membersGood knowledge in preparation of working drawings and standards Able to work efficiently to carry out assigned tasks and meet deadlinesQualificationsYou'll Need to Have:Minimum Diploma in Architectural Technology or Degree in Architecture from a recognized programMinimum of 3 years relevant experience in an architectural firmCAD TechnologistExperience in large scale projects or transit projects would be an asset.AutoCAD & MIcrostation is requiredPast/current experience in production of working drawings.Knowledge of Building Code, tender and construction requirements.Able to work under pressure to complete work and meet deadlinesExtremely well organized with good interpersonal skillsStrong written and verbal communication skillsPlease send in your resume in confidence to paul.dusome!randstad.ca AdvantagesGood knowledge in preparation of working drawings and standards Able to work efficiently to carry out assigned tasks and meet deadlinesResponsibilitiesDevelopment of complete set of working drawings, construction documents, etc., under the direction and support of senior team membersAs a technologist, effectively communicate with other team membersGood knowledge in preparation of working drawings and standards Able to work efficiently to carry out assigned tasks and meet deadlinesQualificationsYou'll Need to Have:Minimum Diploma in Architectural Technology or Degree in Architecture from a recognized programMinimum of 3 years relevant experience in an architectural firmCAD TechnologistExperience in large scale projects or transit projects would be an asset.AutoCAD & MIcrostation is requiredPast/current experience in production of working drawings.Knowledge of Building Code, tender and construction requirements.Able to work under pressure to complete work and meet deadlinesExtremely well organized with good interpersonal skillsStrong written and verbal communication skillsPlease send in your resume in confidence to paul.dusome!randstad.ca QualificationsMinimum Diploma in Architectural Technology or Degree in Architecture from a recognized programMinimum of 3 years relevant experience in an architectural firmCAD TechnologistExperience in large scale projects or transit projects would be an asset.SummaryDevelopment of complete set of working drawings, construction documents, etc., under the direction and support of senior team membersAs a technologist, effectively communicate with other team membersGood knowledge in preparation of working drawings and standards Able to work efficiently to carry out assigned tasks and meet deadlinesQualificationsYou'll Need to Have:Minimum Diploma in Architectural Technology or Degree in Architecture from a recognized programMinimum of 3 years relevant experience in an architectural firmCAD TechnologistExperience in large scale projects or transit projects would be an asset.AutoCAD & MIcrostation is requiredPast/current experience in production of working drawings.Knowledge of Building Code, tender and construction requirements.Able to work under pressure to complete work and meet deadlinesExtremely well organized with good interpersonal skillsStrong written and verbal communication skillsPlease send in your resume in confidence to paul.dusome!randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Development of complete set of working drawings, construction documents, etc., under the direction and support of senior team membersAs a technologist, effectively communicate with other team membersGood knowledge in preparation of working drawings and standards Able to work efficiently to carry out assigned tasks and meet deadlinesQualificationsYou'll Need to Have:Minimum Diploma in Architectural Technology or Degree in Architecture from a recognized programMinimum of 3 years relevant experience in an architectural firmCAD TechnologistExperience in large scale projects or transit projects would be an asset.AutoCAD & MIcrostation is requiredPast/current experience in production of working drawings.Knowledge of Building Code, tender and construction requirements.Able to work under pressure to complete work and meet deadlinesExtremely well organized with good interpersonal skillsStrong written and verbal communication skillsPlease send in your resume in confidence to paul.dusome!randstad.ca AdvantagesGood knowledge in preparation of working drawings and standards Able to work efficiently to carry out assigned tasks and meet deadlinesResponsibilitiesDevelopment of complete set of working drawings, construction documents, etc., under the direction and support of senior team membersAs a technologist, effectively communicate with other team membersGood knowledge in preparation of working drawings and standards Able to work efficiently to carry out assigned tasks and meet deadlinesQualificationsYou'll Need to Have:Minimum Diploma in Architectural Technology or Degree in Architecture from a recognized programMinimum of 3 years relevant experience in an architectural firmCAD TechnologistExperience in large scale projects or transit projects would be an asset.AutoCAD & MIcrostation is requiredPast/current experience in production of working drawings.Knowledge of Building Code, tender and construction requirements.Able to work under pressure to complete work and meet deadlinesExtremely well organized with good interpersonal skillsStrong written and verbal communication skillsPlease send in your resume in confidence to paul.dusome!randstad.ca QualificationsMinimum Diploma in Architectural Technology or Degree in Architecture from a recognized programMinimum of 3 years relevant experience in an architectural firmCAD TechnologistExperience in large scale projects or transit projects would be an asset.SummaryDevelopment of complete set of working drawings, construction documents, etc., under the direction and support of senior team membersAs a technologist, effectively communicate with other team membersGood knowledge in preparation of working drawings and standards Able to work efficiently to carry out assigned tasks and meet deadlinesQualificationsYou'll Need to Have:Minimum Diploma in Architectural Technology or Degree in Architecture from a recognized programMinimum of 3 years relevant experience in an architectural firmCAD TechnologistExperience in large scale projects or transit projects would be an asset.AutoCAD & MIcrostation is requiredPast/current experience in production of working drawings.Knowledge of Building Code, tender and construction requirements.Able to work under pressure to complete work and meet deadlinesExtremely well organized with good interpersonal skillsStrong written and verbal communication skillsPlease send in your resume in confidence to paul.dusome!randstad.ca Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Burford, Ontario
      • Permanent
      Our client in Brantford, ON has partnered with Randstad Engineering in their search for a Project Manager to spearhead their new Land Development division! This role will be responsible for managing and coordinating in the areas of planning, execution and delivery of new build multifamily residential buildings and land development projects.AdvantagesThis is a permanent opportunity with a profitable Real Estate Investment firm, that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, performance bonuses, benefits, paid vacation and flexibility.Responsibilities•Responsible for the planning, executing and delivery of land development and new build and renovation construction projects, ensuring the project is within budget and on schedule while managing the clients’ expectations;•Work with Property Management when needed•Act as liaison between site work crews and decision-makers to identify, recommend, develop,•implement and support cost-effective project delivery•Manage day-to-day client interactions, communicate effectively with clients and internal/external project teams, and continually seek opportunities to increase client satisfaction;•Managing project execution by providing direction to the project team, appropriately scheduling time and acting as main point of contact between internal and external project teams;•Managing project financials including invoicing, progress payment certificates, collecting accounts receivables and managing project budgets•Plan all construction and safety operations, and schedule work phases to ensure deadlines are met•Collaborate with engineers, architects, etc. to determine the specifications of the project•Organize work and job site particulars to comply with Ministry of Labour requirements•Ensure all Health and Safety regulations are followed•Monitor and enforce adherence to construction budget estimates•Evaluate progress, verify work completion and prepare detailed reportsQualifications•5+ years of experience in a Construction Project Management role•Experience in managing renovation projects, and medium to large construction projects from the ground up•General understanding of real estate investment and property development industries•Experience coordinating design and construction teams•You are able to remain nimble, problem-solve when addressing conflictingSummaryIf you are interested in this opportunity, apply today! Only qualified candidates will be contacted.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Our client in Brantford, ON has partnered with Randstad Engineering in their search for a Project Manager to spearhead their new Land Development division! This role will be responsible for managing and coordinating in the areas of planning, execution and delivery of new build multifamily residential buildings and land development projects.AdvantagesThis is a permanent opportunity with a profitable Real Estate Investment firm, that is focused on positive working relationships and a high caliber of professional service; Offering a competitive salary, performance bonuses, benefits, paid vacation and flexibility.Responsibilities•Responsible for the planning, executing and delivery of land development and new build and renovation construction projects, ensuring the project is within budget and on schedule while managing the clients’ expectations;•Work with Property Management when needed•Act as liaison between site work crews and decision-makers to identify, recommend, develop,•implement and support cost-effective project delivery•Manage day-to-day client interactions, communicate effectively with clients and internal/external project teams, and continually seek opportunities to increase client satisfaction;•Managing project execution by providing direction to the project team, appropriately scheduling time and acting as main point of contact between internal and external project teams;•Managing project financials including invoicing, progress payment certificates, collecting accounts receivables and managing project budgets•Plan all construction and safety operations, and