Thank you for subscribing to your personalised job alerts.

    2 jobs found in Windsor, Ontario

    filter2
    clear all
      • Windsor, Ontario
      • Permanent
      Are you a PLC Programmer with particular interest in Automation?Are you looking for a progressive company Job Responsibilities•Perform PLC logic and programming duties using, but not limited to, the following:AB Control Logix controllersRockwell programming software – RSLogix 5000 and Factory ViewProfinet, Industrial ENet and DNet Winccflex 2008TIA PortalStep 7 version 5.4Omron•Develop and implement standard engineering practices and provide detailed documentation upon project completion;•To ensure that controls and logic programs developed are efficient and that they adhere to the standards and needs of the customer and Valiant TMS ;•To introduce programming improvements in controls and logic systems that are consistent with customer changes or manufacturing needs;•To de-bug, tryout and verify I/O signals and interference zones in the system;•To maintain frequent communication with mechanical and controls design personnel, as well as with manufacturing personnel, throughout the entire programming, and tryout phases of installation;•To document controls logic changes made and provide updates to controls design department, •Lead training of PLC end users through the provision of instruction, advice and feedback to minimize downtime and enable users to quickly achieve full productive capacity while remaining compliant to established regulatory and customer safety protocols and regulations;•Represent Valiant TMS at customer locations, utilizing results driven problem solving skills and techniques while promoting Valiant TMS’ interests and maintaining a strong customer focus.Must have the ability and interest in travelling to customer sites.Will need to be able to legally travel across borders.AdvantagesPaid overtime after 40 hoursAbility to work with a strong, experienced teamResponsibilities•Perform PLC logic and programming duties using, but not limited to, the following:AB Control Logix controllersRockwell programming software – RSLogix 5000 and Factory ViewProfinet, Industrial ENet and DNet Winccflex 2008TIA PortalStep 7 version 5.4Omron•Develop and implement standard engineering practices and provide detailed documentation upon project completion;•To ensure that controls and logic programs developed are efficient and that they adhere to the standards and needs of the customer and Valiant TMS ;•To introduce programming improvements in controls and logic systems that are consistent with customer changes or manufacturing needs;•To de-bug, tryout and verify I/O signals and interference zones in the system;•To maintain frequent communication with mechanical and controls design personnel, as well as with manufacturing personnel, throughout the entire programming, and tryout phases of installation;•To document controls logic changes made and provide updates to controls design department, •Lead training of PLC end users through the provision of instruction, advice and feedback to minimize downtime and enable users to quickly achieve full productive capacity while remaining compliant to established regulatory and customer safety protocols and regulations;•Represent company at customer locations, utilizing results driven problem solving skills and techniques while promoting company interests and maintaining a strong customer focus.QualificationsPosition Requirements•An Electrical Engineering Technology Diploma; or equivalent•A minimum of four (4) years practical experience designing, installing, commissioning, servicing and troubleshooting pneumatic, mechanical and electronic automated equipment in an industrial or manufacturing environment; •A proven ability to prioritize plans of action to accomplish objectives; •Excellent written and oral communications with the ability to manage, successfully, the customer relations function as it relates to the estimating process; •An ability and a willingness to travel out-of-country to customer locations on service assignments that may last over a prolonged period of time•A proven ability to work well within in a "Team-Based" work environment.SummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you a PLC Programmer with particular interest in Automation?Are you looking for a progressive company Job Responsibilities•Perform PLC logic and programming duties using, but not limited to, the following:AB Control Logix controllersRockwell programming software – RSLogix 5000 and Factory ViewProfinet, Industrial ENet and DNet Winccflex 2008TIA PortalStep 7 version 5.4Omron•Develop and implement standard engineering practices and provide detailed documentation upon project completion;•To ensure that controls and logic programs developed are efficient and that they adhere to the standards and needs of the customer and Valiant TMS ;•To introduce programming improvements in controls and logic systems that are consistent with customer changes or manufacturing needs;•To de-bug, tryout and verify I/O signals and interference zones in the system;•To maintain frequent communication with mechanical and controls design personnel, as well as with manufacturing personnel, throughout the entire programming, and tryout phases of installation;•To document controls logic changes made and provide updates to controls design department, •Lead training of PLC end users through the provision of instruction, advice and feedback to minimize downtime and enable users to quickly achieve full productive capacity while remaining compliant to established regulatory and customer safety protocols and regulations;•Represent Valiant TMS at customer locations, utilizing results driven problem solving skills and techniques while promoting Valiant TMS’ interests and maintaining a strong customer focus.Must have the ability and interest in travelling to customer sites.Will need to be able to legally travel across borders.AdvantagesPaid overtime after 40 hoursAbility to work with a strong, experienced teamResponsibilities•Perform PLC logic and programming duties using, but not limited to, the following:AB Control Logix controllersRockwell programming software – RSLogix 5000 and Factory ViewProfinet, Industrial ENet and DNet Winccflex 2008TIA PortalStep 7 version 5.4Omron•Develop and implement standard engineering practices and provide detailed documentation upon project completion;•To ensure that controls and logic programs developed are efficient and that they adhere to the standards and needs of the customer and Valiant TMS ;•To introduce programming improvements in controls and logic systems that are consistent with customer changes or manufacturing needs;•To de-bug, tryout and verify I/O signals and interference zones in the system;•To maintain frequent communication with mechanical and controls design personnel, as well as with manufacturing personnel, throughout the entire programming, and tryout phases of installation;•To document controls logic changes made and provide updates to controls design department, •Lead training of PLC end users through the provision of instruction, advice and feedback to minimize downtime and enable users to quickly achieve full productive capacity while remaining compliant to established regulatory and customer safety protocols and regulations;•Represent company at customer locations, utilizing results driven problem solving skills and techniques while promoting company interests and maintaining a strong customer focus.QualificationsPosition Requirements•An Electrical Engineering Technology Diploma; or equivalent•A minimum of four (4) years practical experience designing, installing, commissioning, servicing and troubleshooting pneumatic, mechanical and electronic automated equipment in an industrial or manufacturing environment; •A proven ability to prioritize plans of action to accomplish objectives; •Excellent written and oral communications with the ability to manage, successfully, the customer relations function as it relates to the estimating process; •An ability and a willingness to travel out-of-country to customer locations on service assignments that may last over a prolonged period of time•A proven ability to work well within in a "Team-Based" work environment.SummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positions.Randstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      • Windsor, Ontario
      • Permanent
      Are you an experienced Mechanical Designer?Do you have background in the Automation sector?Are you looking for a growth opportunity?If so, this could be the opportunity for you!•Construct and modify CAD models per customer CAD standards using one or more of the following systems: Inventor, Catia, Unigraphics, FIDES, AutoCad, and Solidworks. Estimate design hours for tool concept to design and release for original content as well as changes;•Prepare layout and detail drawings of design as required to project timelines. Develop creative and innovative engineered solutions that meet or exceed customer requirements.•Review and study customer specifications, engineering schematics and other data in order to determine the design procedures needed to generate and release digital and/or hardcopy printouts related to the engineering and manufacturing requirements;•Perform necessary engineering calculations and proper material selection to satisfy the required design functionality.•Coordinate any structural and/or finite element analysis that need to be performed for assessing the functionality of the tools designed;•Coordinate the development of part drawings, including CAD drawings, through other designers, internal or outsourced, to comprehensively manage the complete design of the tools that are assigned;•Work closely with senior designer and/or designer on design changes to improve manufacturability, maintainability and serviceability of equipment;•Be knowledgeable of the release systems and procedures, and releases all the necessary detail drawings in digital and/or hardcopy formats per established requirements of the internal and external customers (for example release to purchasing for make/buy decision, input for controls design and engineering, and documents to support field installation and service personnel, direct digital transfers to customer systems)•Possess general awareness of Geometric Dimensioning and Tolerancing (GD&T) concepts and its application in manufacturing and assembly sectors in automotive, aerospace, construction and forestry industries.Also looking for candidates that can do the above, but additional opportunities are available for individuals with the capabilities and experience leading programs.AdvantagesPaid overtime after 40 hoursAbility to work with a strong, experienced teamResponsibilities•Construct and modify CAD models per customer CAD standards using one or more of the following systems: Inventor, Catia, Unigraphics, FIDES, AutoCad, and Solidworks. Estimate design hours for tool concept to design and release for original content as well as changes;•Prepare layout and detail drawings of design as required to project timelines. Develop creative and innovative engineered solutions that meet or exceed customer requirements.•Review and study customer specifications, engineering schematics and other data in order to determine the design procedures needed to generate and release digital and/or hardcopy printouts related to the engineering and manufacturing requirements;•Perform necessary engineering calculations and proper material selection to satisfy the required design functionality.•Coordinate any structural and/or finite element analysis that need to be performed for assessing the functionality of the tools designed;•Coordinate the development of part drawings, including CAD drawings, through other designers, internal or outsourced, to comprehensively manage the complete design of the tools that are assigned;•Work closely with senior designer and/or designer on design changes to improve manufacturability, maintainability and serviceability of equipment;•Be knowledgeable of the release systems and procedures, and releases all the necessary detail drawings in digital and/or hardcopy formats per established requirements of the internal and external customers (for example release to purchasing for make/buy decision, input for controls design and engineering, and documents to support field installation and service personnel, direct digital transfers to customer systems)•Possess general awareness of Geometric Dimensioning and Tolerancing (GD&T) concepts and its application in manufacturing and assembly sectors in automotive, aerospace, construction and forestry industries.QualificationsPosition Requirements•A Bachelor of Applied Science or Mechanical Engineering degree or equivalent from a recognized University is preferred or an Associate Degree/ Engineering Diploma, preferably with a specialization in design and drafting, from a recognized Community College or equivalent experience as assessed by the Hiring Manager•Specialization training with certifications where applicable from recognized training organizations, in the use of CAD systems and software, such Catia, Unigraphics, FIDES, AutoCAD, Inventor, Solidworks;•A minimum of 8 years of direct experience and demonstrated capabilities in concepting, 3-D designing and 2-D detailing by consistently using one or more of the above mentioned CAD systems for the design of manufacturing and assembly tooling, which include geo, respot, end-of-arm tooling, etc.•Experience in one or more of the following industries are a must- automotive, aerospace, construction and forestry vehicles/ equipment manufacturing industries. In the automotive manufacturing industry, specific experience focused in any one or more of the following areas is highly recommended: body-in-white welding and assembly, closure hanging, powertrain manufacturing systems, component washers, leak-testers, functional testing matching), final assembly, or material handling in manufacturing plants.•Ability to effectively prioritize and execute tasks in a high pressure environment including following on tools during the fabrication, build installation and commissioning phases of the project.•Ability and willingness to travel to any of the customer and Company’s work locations in North America, Europe and Asia, as required by Management.•Must be willing to work extended hours, when necessary, including overtime, weekends and holidays and on night shift, as project and customer demands dictate.•Excellent interpersonal, written and verbal communication skills.•Ability to work with others, including peers and personnel in other departments.SummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positionsRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.
      Are you an experienced Mechanical Designer?Do you have background in the Automation sector?Are you looking for a growth opportunity?If so, this could be the opportunity for you!•Construct and modify CAD models per customer CAD standards using one or more of the following systems: Inventor, Catia, Unigraphics, FIDES, AutoCad, and Solidworks. Estimate design hours for tool concept to design and release for original content as well as changes;•Prepare layout and detail drawings of design as required to project timelines. Develop creative and innovative engineered solutions that meet or exceed customer requirements.•Review and study customer specifications, engineering schematics and other data in order to determine the design procedures needed to generate and release digital and/or hardcopy printouts related to the engineering and manufacturing requirements;•Perform necessary engineering calculations and proper material selection to satisfy the required design functionality.•Coordinate any structural and/or finite element analysis that need to be performed for assessing the functionality of the tools designed;•Coordinate the development of part drawings, including CAD drawings, through other designers, internal or outsourced, to comprehensively manage the complete design of the tools that are assigned;•Work closely with senior designer and/or designer on design changes to improve manufacturability, maintainability and serviceability of equipment;•Be knowledgeable of the release systems and procedures, and releases all the necessary detail drawings in digital and/or hardcopy formats per established requirements of the internal and external customers (for example release to purchasing for make/buy decision, input for controls design and engineering, and documents to support field installation and service personnel, direct digital transfers to customer systems)•Possess general awareness of Geometric Dimensioning and Tolerancing (GD&T) concepts and its application in manufacturing and assembly sectors in automotive, aerospace, construction and forestry industries.Also looking for candidates that can do the above, but additional opportunities are available for individuals with the capabilities and experience leading programs.AdvantagesPaid overtime after 40 hoursAbility to work with a strong, experienced teamResponsibilities•Construct and modify CAD models per customer CAD standards using one or more of the following systems: Inventor, Catia, Unigraphics, FIDES, AutoCad, and Solidworks. Estimate design hours for tool concept to design and release for original content as well as changes;•Prepare layout and detail drawings of design as required to project timelines. Develop creative and innovative engineered solutions that meet or exceed customer requirements.•Review and study customer specifications, engineering schematics and other data in order to determine the design procedures needed to generate and release digital and/or hardcopy printouts related to the engineering and manufacturing requirements;•Perform necessary engineering calculations and proper material selection to satisfy the required design functionality.•Coordinate any structural and/or finite element analysis that need to be performed for assessing the functionality of the tools designed;•Coordinate the development of part drawings, including CAD drawings, through other designers, internal or outsourced, to comprehensively manage the complete design of the tools that are assigned;•Work closely with senior designer and/or designer on design changes to improve manufacturability, maintainability and serviceability of equipment;•Be knowledgeable of the release systems and procedures, and releases all the necessary detail drawings in digital and/or hardcopy formats per established requirements of the internal and external customers (for example release to purchasing for make/buy decision, input for controls design and engineering, and documents to support field installation and service personnel, direct digital transfers to customer systems)•Possess general awareness of Geometric Dimensioning and Tolerancing (GD&T) concepts and its application in manufacturing and assembly sectors in automotive, aerospace, construction and forestry industries.QualificationsPosition Requirements•A Bachelor of Applied Science or Mechanical Engineering degree or equivalent from a recognized University is preferred or an Associate Degree/ Engineering Diploma, preferably with a specialization in design and drafting, from a recognized Community College or equivalent experience as assessed by the Hiring Manager•Specialization training with certifications where applicable from recognized training organizations, in the use of CAD systems and software, such Catia, Unigraphics, FIDES, AutoCAD, Inventor, Solidworks;•A minimum of 8 years of direct experience and demonstrated capabilities in concepting, 3-D designing and 2-D detailing by consistently using one or more of the above mentioned CAD systems for the design of manufacturing and assembly tooling, which include geo, respot, end-of-arm tooling, etc.•Experience in one or more of the following industries are a must- automotive, aerospace, construction and forestry vehicles/ equipment manufacturing industries. In the automotive manufacturing industry, specific experience focused in any one or more of the following areas is highly recommended: body-in-white welding and assembly, closure hanging, powertrain manufacturing systems, component washers, leak-testers, functional testing matching), final assembly, or material handling in manufacturing plants.•Ability to effectively prioritize and execute tasks in a high pressure environment including following on tools during the fabrication, build installation and commissioning phases of the project.•Ability and willingness to travel to any of the customer and Company’s work locations in North America, Europe and Asia, as required by Management.•Must be willing to work extended hours, when necessary, including overtime, weekends and holidays and on night shift, as project and customer demands dictate.•Excellent interpersonal, written and verbal communication skills.•Ability to work with others, including peers and personnel in other departments.SummaryApply online or email resume to Brian Roach at brian.roach@randstad.caOnly qualified candidates will be contactedPlease visit www.randstad.ca for a complete list of open positionsRandstad Canada is committed to building a diverse workforce reflective of the diversity of Canada. As a result, we promote employment equity and encourage candidates, especially those who identify as a woman, an Aboriginal person, a person with a disability or a member of a visible minority group, and any others who may contribute to the diversification of our workforce, to apply.Randstad Canada is also committed to developing an inclusive, barrier-free selection processes and work environments.If contacted in relation to a job opportunity, you should advise your Randstad Representative or your local Randstad branch in a timely fashion of the accommodation measures which must be taken to enable you to be assessed in a fair and equitable manner.Information received relating to accommodation measures will be addressed confidentially.For all feedback on equity and accommodation needs, please contact your local Randstad Canada Branch.

    Thank you for subscribing to your personalised job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.